Database Develop

[Q] htc one noob problems

Hi all, Ok, I have my htc one unlocked the bootloader and have rooted it but somewhere....... Somehow i have wiped the system,I have no factory reset, I can go through the fastboot usb then into recovery with TWRP and now i'm stuck........ If i try to reboot the phone all i get is the device starting up to white htc screen then restarting again, Can i have someone point me in the right direction please.
M7_UL PUT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-4A.17.3250.14
OpenDSP-v31.120.274.0617
OS-2.24.841.1
eMMC-boot 2048MB
Jun 21 2013,23:03:15.0

aratula67 said:
Hi all, Ok, I have my htc one unlocked the bootloader and have rooted it but somewhere....... Somehow i have wiped the system,I have no factory reset, I can go through the fastboot usb then into recovery with TWRP and now i'm stuck........ If i try to reboot the phone all i get is the device starting up to white htc screen then restarting again, Can i have someone point me in the right direction please.
M7_UL PUT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-4A.17.3250.14
OpenDSP-v31.120.274.0617
OS-2.24.841.1
eMMC-boot 2048MB
Jun 21 2013,23:03:15.0
Click to expand...
Click to collapse
install a ROM, using one of those methods:
1- OTG cable
2- adb push <name of rom>.zip /data/media/0/
3- adb sideload <name of rom>.zip (http://forum.xda-developers.com/showthread.php?t=2317986)

nkk71 said:
install a ROM, using one of those methods:
1- OTG cable
2- adb push <name of rom>.zip /data/media/0/
3- adb sideload <name of rom>.zip (http://forum.xda-developers.com/showthread.php?t=2317986)
Click to expand...
Click to collapse
I'll see if i can work out No's 2 and 3.
I tried otg-usb with (bigxie_m7_GPe_KRT16S_odexed-signed.zip) and i got (no md5 visible) it says it's installing but then it says failed to load.

aratula67 said:
I'll see if i can work out No's 2 and 3.
I tried otg-usb with (bigxie_m7_GPe_KRT16S_odexed-signed.zip) and i got (no md5 visible) it says it's installing but then it says failed to load.
Click to expand...
Click to collapse
is that a 4.4 GPE ROM?
4.4 ROMs require TWRP 2.6.3.3+
and 4.4 GPE ROMs usually require S-Off, otherwise they'll bootloop

nkk71 said:
is that a 4.4 GPE ROM?
4.4 ROMs require TWRP 2.6.3.3+
and 4.4 GPE ROMs usually require S-Off, otherwise they'll bootloop
Click to expand...
Click to collapse
how do i updrade to twrp 2.6.3.3 please

aratula67 said:
how do i updrade to twrp 2.6.3.3 please
Click to expand...
Click to collapse
[RECOVERY] TWRP touch recovery v2.6.3.4

Same Problem in addition to adb!
I got the same problem stuck with the start up screen but my problem is i cant see my device in adb! I tried several times but no luck! Any solutions for that?
Thanks...

Nothing, Nada, Zip............
nkk71 said:
install a ROM, using one of those methods:
1- OTG cable
2- adb push <name of rom>.zip /data/media/0/
3- adb sideload <name of rom>.zip (http://forum.xda-developers.com/showthread.php?t=2317986)
Click to expand...
Click to collapse
Hey thanks for your help but i tried all three of these and all i get is failed to load....... Any further hints for me??

aratula67 said:
Hey thanks for your help but i tried all three of these and all i get is failed to load....... Any further hints for me??
Click to expand...
Click to collapse
can you be a bit more specific about the error; maybe copy/paste command prompt.

nkk71 said:
can you be a bit more specific about the error; maybe copy/paste command prompt.
Click to expand...
Click to collapse
Ok, after some more reading and research i've finally managed to load ViperOne 3.5.0 rom. TWRP (2.6.1.0) says it's there and there's a backup done, But in bootloader mode it says S-ON, unlocked and rooted but the htc one just keeps rebooting all the time gets to white screen (htc quietly brilliant) and that's it........ then reboots over and over, until i manually press power and volume down to go to bootloader or recovery screen......
Any ideas?

aratula67 said:
Ok, after some more reading and research i've finally managed to load ViperOne 3.5.0 rom. TWRP (2.6.1.0) says it's there and there's a backup done, But in bootloader mode it says S-ON, unlocked and rooted but the htc one just keeps rebooting all the time gets to white screen (htc quietly brilliant) and that's it........ then reboots over and over, until i manually press power and volume down to go to bootloader or recovery screen......
Any ideas?
Click to expand...
Click to collapse
did you select WIPE in the installer? if not reinstall using WIPE, and in TWRP, wipe cache and dalvik. (it's in Wipe -> Advanced Wipe -> select Dalvik and Cache only, then swipe to wipe)

[Q] Relocking and Flashing to Stock HTC M7 on Bell

Hey community,
I'd really love some help from the experts here. I bought an HTC one that was originally on Bell, and the previous owner had rooted it and flashed Cyanogenmod 10.2 on it. To enter the sim unlock code, I have to flash it back to stock.
Now, I've been spoiled previously by using Nexus devices so I haven't run into this problem before.
What I've done so far:
Followed this guide about half way, to the point where I re-locked the bootloader. (fastboot oem lock)
https://www.youtube.com/watch?v=FZR5yhP75Jg
I got stuck after that, because Bell apparently does note have an excutable RUU file. I've only been able to find nandroid backups.
Right now, I cant get past the bootloader mode.
This is what shows on my screen:
***Tampered***
***Relocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.20.3263.16
openDSP-v32.120.274.0909
OS-3.23.666.1
eMMC-boot 2048MB
Sept 17, 2013
Can anyone please tell me what the next step is? I have two files downloaded, but not sure which to use, or really how.
-M7 CWM Nandroid Backup CID BM___001 1.29.666.5
-Stock_JB_4.3_BM___001_TWRP_3.23.666.1_htc_one_m7
Thank you.

slick2404 said:
Hey community,
I'd really love some help from the experts here. I bought an HTC one that was originally on Bell, and the previous owner had rooted it and flashed Cyanogenmod 10.2 on it. To enter the sim unlock code, I have to flash it back to stock.
Now, I've been spoiled previously by using Nexus devices so I haven't run into this problem before.
What I've done so far:
Followed this guide about half way, to the point where I re-locked the bootloader. (fastboot oem lock)
https://www.youtube.com/watch?v=FZR5yhP75Jg
I got stuck after that, because Bell apparently does note have an excutable RUU file. I've only been able to find nandroid backups.
Right now, I cant get past the bootloader mode.
This is what shows on my screen:
***Tampered***
***Relocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.20.3263.16
openDSP-v32.120.274.0909
OS-3.23.666.1
eMMC-boot 2048MB
Sept 17, 2013
Can anyone please tell me what the next step is? I have two files downloaded, but not sure which to use, or really how.
-M7 CWM Nandroid Backup CID BM___001 1.29.666.5
-Stock_JB_4.3_BM___001_TWRP_3.23.666.1_htc_one_m7
Thank you.
Click to expand...
Click to collapse
re-locking the bootloader is only required to flash ruu which is not an option for your phone (no ruu available for bell). Now you'll need to unlock the bootloader again to flash either TWRP recovery to resotre from a twrp backup or CWM to restore from a CWM backup.
I'll suggest you to flash twrp 2.6.3.3 and ARHD 53 rom. Many users reported successfully sim-unlocked their phones using ARHD rom. If that don't work then you could try with the nandroid backups.

slick2404 said:
Hey community,
I'd really love some help from the experts here. I bought an HTC one that was originally on Bell, and the previous owner had rooted it and flashed Cyanogenmod 10.2 on it. To enter the sim unlock code, I have to flash it back to stock.
Now, I've been spoiled previously by using Nexus devices so I haven't run into this problem before.
What I've done so far:
Followed this guide about half way, to the point where I re-locked the bootloader. (fastboot oem lock)
https://www.youtube.com/watch?v=FZR5yhP75Jg
I got stuck after that, because Bell apparently does note have an excutable RUU file. I've only been able to find nandroid backups.
Right now, I cant get past the bootloader mode.
This is what shows on my screen:
***Tampered***
***Relocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.20.3263.16
openDSP-v32.120.274.0909
OS-3.23.666.1
eMMC-boot 2048MB
Sept 17, 2013
Can anyone please tell me what the next step is? I have two files downloaded, but not sure which to use, or really how.
-M7 CWM Nandroid Backup CID BM___001 1.29.666.5
-Stock_JB_4.3_BM___001_TWRP_3.23.666.1_htc_one_m7
Thank you.
Click to expand...
Click to collapse
unlock bootloader
flash TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
This is from @crushalot instructions on restoring a nandroid backup
Then enter recovery either by holding power and vol down button until bootloader displays and then select recovery or if device is booted into the OS use this adb command:
adb reboot recovery
Now perform a test backup and allow it to complete. Then make a note of the folder in which the backup was created. Now copy the downloaded stock Nandroid into that same folder so that recovery will see the backup and allow you to restore it.
Click to expand...
Click to collapse
For a phone that's not booting up this means pushing the files with adb push
so the command would look like this
adb push 2013-08-08--19-24-38.ATT.502.15 /sdcard/TWRP/BACKUPS/yourSerialno/
these files are over 1.2 gigs sometimes so it takes a long time, be patient
Also be sure the files your pushing are in the same folder as adb

Thanks for the replies ^
Okay, so I have now unlocked my bootloader successfully - however am now stuck in a cyanogenmod bootloop.
What's the best way out of this?I have CWM Recovery V6.0.3.1 I can boot into - is this where I try and install ARHD 53 rom? When I plug the phone into my computer, I can't see it as a drive to copy a rom into.
TIA
***Tampered***
***Unlocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.20.3263.16
openDSP-v32.120.274.0909
OS-3.23.666.1

Also my fastboot options are:
Fastboot
Recovery
Factory Reset
Simlock
Image CRC
Show Barcode.

slick2404 said:
Thanks for the replies ^
Okay, so I have now unlocked my bootloader successfully - however am now stuck in a cyanogenmod bootloop.
What's the best way out of this?I have CWM Recovery V6.0.3.1 I can boot into - is this where I try and install ARHD 53 rom? When I plug the phone into my computer, I can't see it as a drive to copy a rom into.
TIA
***Tampered***
***Unlocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.20.3263.16
openDSP-v32.120.274.0909
OS-3.23.666.1
Click to expand...
Click to collapse
if you want to flash arhd 53 you will need at least twrp recovery version 2.6.3.3 as specified in the ARHD rom thread. Then use either adb push or adb sideload method to transfer the rom on your phone which are explained here

The error I'm getting in CWM Recovery is:
E: can't mount /sdcard
E: can't mount /external _sd
How can I install TWRP Recovery? Sorry, I'm at a loss right now and feel so confused.

alray said:
if you want to flash arhd 53 you will need at least twrp recovery version 2.6.3.3 as specified in the ARHD rom thread. Then use either adb push or adb sideload method to transfer the rom on your phone which are explained here
Click to expand...
Click to collapse
slick2404 said:
The error I'm getting in CWM Recovery is:
E: can't mount /sdcard
E: can't mount /external _sd
How can I install TWRP Recovery? Sorry, I'm at a loss right now and feel so confused.
Click to expand...
Click to collapse
So I've installed TWRP 2.6.3.3 0 but I still can't manage to see the sd card on my computer, how can I push the nandroid backup to this phone? Is it still via fastboot commands?

slick2404 said:
So I've installed TWRP 2.6.3.3 0 but I still can't manage to see the sd card on my computer, how can I push the nandroid backup to this phone? Is it still via fastboot commands?
Click to expand...
Click to collapse
like I said in post #6 you need to either adb push or adb sideload if you want to install a rom. If you want to restore a backup then use adb push to transfer the backup to the phone.
instructions how to adb push or adb sideload linked in post #6

alray said:
like I said in post #6 you need to either adb push or adb sideload if you want to install a rom. If you want to restore a backup then use adb push to transfer the backup to the phone.
instructions how to adb push or adb sideload linked in post #6
Click to expand...
Click to collapse
Thanks for your help.
I was able to push the rom to the /sdcard folder via ADB Push
then from recovery, had to wipe/format all data. I think this created the directories for me
and then i was able to install CM11 again.
now im just trying to figure out how to install the nandroid backup since bell does not have a RUU, It says failed everytime i try in recovery and i have it in the same parent folder as my CM recovery i created.

slick2404 said:
Thanks for your help.
I was able to push the rom to the /sdcard folder via ADB Push
then from recovery, had to wipe/format all data. I think this created the directories for me
and then i was able to install CM11 again.
now im just trying to figure out how to install the nandroid backup since bell does not have a RUU, It says failed everytime i try in recovery and i have it in the same parent folder as my CM recovery i created.
Click to expand...
Click to collapse
like cIsA said you have to push the twrp nandroid in this folder: /sdcard/TWRP/BACKUPS/yourSerialno/
You have to make a backup first for this folder to be created. So make a twrp nandroid backup of the boot partition only (because its light). This will generate the backup path with your s/n + date. Then delete the file inside that folder and replaced it by the nandroid backup you want to restore.

ADB in bootloader

Please help me.
I've done something really stupid. I flashed from ClockWorkMod to Android Revolution HD on my HTC One m7.
I've got ClockWorkMod Recovery installed and when flashing was done i got stuck in HTC startup screen.
Trying to get in to recovery mode again and install my backup did not work, it just shows ClockWorkMod Recovery logo and reboots. When in bootloader mode, i can't access the phone through adb or fastboot, no devices in list.
Is there any way to use ADB/fastboot when in the bootloader screen?
Info from bootloader screen:
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4A.23.3263.28
OpenDSP-V32.120.274.0909
OS-4.19.401.8
eMMC-boot 2048MB

reboot your computer and tyr again.
bewn said:
Please help me.
I've done something really stupid. I flashed from ClockWorkMod to Android Revolution HD on my HTC One m7.
I've got ClockWorkMod Recovery installed and when flashing was done i got stuck in HTC startup screen.
Trying to get in to recovery mode again and install my backup did not work, it just shows ClockWorkMod Recovery logo and reboots. When in bootloader mode, i can't access the phone through adb or fastboot, no devices in list.
Is there any way to use ADB/fastboot when in the bootloader screen?
Info from bootloader screen:
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4A.23.3263.28
OpenDSP-V32.120.274.0909
OS-4.19.401.8
eMMC-boot 2048MB
Click to expand...
Click to collapse

bewn said:
Please help me.
I've done something really stupid. I flashed from ClockWorkMod to Android Revolution HD on my HTC One m7.
I've got ClockWorkMod Recovery installed and when flashing was done i got stuck in HTC startup screen.
Trying to get in to recovery mode again and install my backup did not work, it just shows ClockWorkMod Recovery logo and reboots. When in bootloader mode, i can't access the phone through adb or fastboot, no devices in list.
Is there any way to use ADB/fastboot when in the bootloader screen?
Info from bootloader screen:
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4A.23.3263.28
OpenDSP-V32.120.274.0909
OS-4.19.401.8
eMMC-boot 2048MB
Click to expand...
Click to collapse
CMW does not work with ARHD. You need TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot reboot-bootloader
Enter recovery and flash ARHD again
Sent from my HTC One using XDA Premium 4 mobile app

After fastboot flash recovery ...
fastboot erase cache

SOLVED
bored_stupid said:
CMW does not work with ARHD. You need TWRP 2.6.3.3
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot reboot-bootloader
Enter recovery and flash ARHD again
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks bored_stupid! This solved the installation problem.
The other problems were solved like this:
The first problem was that fastboot didn't connect to my PC.
This was solved by changing computer to one with a USB 2.0.
Now the problem I had with my recovery was solved by flashing the recovery partition again and clean the cache (forget that the first time).
fastboot flash recovery clockworkrec.img
fastboot erase cache
After this I was able to get in recovery mode.

[Q] Stuck in Bootloader

I'm currently stuck in bootloader if I reboot then it just returns to bootloader. If I try to enter recovery it just enters bootloader.
Code:
*** TAMPERED ***
*** UNLOCKED ***
M7_UL PVT SHIP S-OFF RH
CID-1111111
HBOOT-1.57.0000
RADIO-4T.27.3218.14
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
May 5 2014.23:16:29.0
It also says at the "lower middle" of the screen "Active cmdline overflow! (1083 Bytes)
Any help is appreciated.

P1raten said:
I'm currently stuck in bootloader if I reboot then it just returns to bootloader. If I try to enter recovery it just enters bootloader.
Code:
*** TAMPERED ***
*** UNLOCKED ***
M7_UL PVT SHIP S-OFF RH
CID-1111111
HBOOT-1.57.0000
RADIO-4T.27.3218.14
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
May 5 2014.23:16:29.0
It also says at the "lower middle" of the screen "Active cmdline overflow! (1083 Bytes)
Any help is appreciated.
Click to expand...
Click to collapse
Read Here....
http://forum.xda-developers.com/showthread.php?t=2739126

bored_stupid said:
Read Here....
http://forum.xda-developers.com/showthread.php?t=2739126
Click to expand...
Click to collapse
Tried that but I still can't enter recovery after flashing it.

P1raten said:
Tried that but I still can't enter recovery after flashing it.
Click to expand...
Click to collapse
Try flashing the 1.44 hboot..

bored_stupid said:
Try flashing the 1.44 hboot..
Click to expand...
Click to collapse
I managed to install recovery, but now I don't know what to do.
ADB doesn't work in recovery and I don't know of any way of getting the ROM to the device.

P1raten said:
I managed to install recovery, but now I don't know what to do.
ADB doesn't work in recovery and I don't know of any way of getting the ROM to the device.
Click to expand...
Click to collapse
ADB should work in recovery, If not I take it that you are using windows 8.. If so update your drivers
Copy the ROM you want to install to the fastboot folder.
Open a command prompt then type:
cd Downloads\fastboot
adb push ROM.zip /sdcard/
Replace ROM.zip with the ROM filename you copied earlier to fastboot folder.
This will copy your ROM to the internal storage so once it’s done, just use TWRP to install ROM.

bored_stupid said:
ADB should work in recovery, If not I take it that you are using windows 8.. If so update your drivers
Copy the ROM you want to install to the fastboot folder.
Open a command prompt then type:
cd Downloads\fastboot
adb push ROM.zip /sdcard/
Replace ROM.zip with the ROM filename you copied earlier to fastboot folder.
This will copy your ROM to the internal storage so once it’s done, just use TWRP to install ROM.
Click to expand...
Click to collapse
I'm using Windows 7. And I recently updated my drivers.
HTCDriver3.0.0.007.exe

Read here
http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
Try a different USB port
Or use an OTG cable
Sent from my HTC One using Xparent Skyblue Tapatalk 2

Fixed by installing Universal Naked Drivers.
http://forum.xda-developers.com/showthread.php?t=1996051

P1raten said:
Fixed by installing Universal Naked Drivers.
http://forum.xda-developers.com/showthread.php?t=1996051
Click to expand...
Click to collapse
Did you install the rom and what does the bootloader say now?
Sent from my HTC One using Xparent Skyblue Tapatalk 2

[Q] Can't install Lollipop OTA, Recovery fails

So a few months back I tried CyanogenMod and found out I ultimately prefer Sense. So I tried to return to it and had some troubles along the way. I finally made it back to stock with the help of some lovely XDA members. However, now when I try to install the OTA, a red symbol appears on the recovery screen. What's wrong?
Previous thread: http://forum.xda-developers.com/htc-one/help/stuck-bootloop-bootloader-relocked-t2922700
The info on my bootloader screen is
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4A.17.3250.14
OpenDSP-v32.120.274.0909
OS-6.14.771.2
eMMC-boot 2048MB

Liam0102 said:
So a few months back I tried CyanogenMod and found out I ultimately prefer Sense. So I tried to return to it and had some troubles along the way. I finally made it back to stock with the help of some lovely XDA members. However, now when I try to install the OTA, a red symbol appears on the recovery screen. What's wrong?
Previous thread: http://forum.xda-developers.com/htc-one/help/stuck-bootloop-bootloader-relocked-t2922700
The info on my bootloader screen is
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4A.17.3250.14
OpenDSP-v32.120.274.0909
OS-6.14.771.2
eMMC-boot 2048MB
Click to expand...
Click to collapse
when on recovery hold volume up and hit power to reveal the recovery menu. You'll be able to see the error message. Post the error here.

alray said:
when on recovery hold volume up and hit power to reveal the recovery menu. You'll be able to see the error message. Post the error here.
Click to expand...
Click to collapse
Package expects build fingerprint of htc/h3g_uk/m7:4.4.3/KTU84L/371188.2:user/release-keys or htc/h3g-uk/m7:5.0.2/LRX22G/482424.1:user/release-keys; this device has htc/h3g_uk/m7:4.4.2/KOT49H/337737.3:user/release-keys.

Liam0102 said:
Package expects build fingerprint of htc/h3g_uk/m7:4.4.3/KTU84L/371188.2:user/release-keys or htc/h3g-uk/m7:5.0.2/LRX22G/482424.1:user/release-keys; this device has htc/h3g_uk/m7:4.4.2/KOT49H/337737.3:user/release-keys.
Click to expand...
Click to collapse
have you modified anything since you have restored your phone using danny's backup? looks like the wrong recovery is installed.

alray said:
have you modified anything since you have restored your phone using danny's backup? looks like the wrong recovery is installed.
Click to expand...
Click to collapse
Not that I can remember. I think I found a stock recovery and flashed that but I can't recall which one.

Liam0102 said:
Not that I can remember. I think I found a stock recovery and flashed that but I can't recall which one.
Click to expand...
Click to collapse
thats probably the problem.
try with this recovery: https://dl.dropboxusercontent.com/u/77459918/recovery.img
Code:
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot
then try the ota update again, if its not working, there is another solution we can try.

alray said:
thats probably the problem.
try with this recovery: https://dl.dropboxusercontent.com/u/77459918/recovery.img
Code:
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot
then try the ota update again, if its not working, there is another solution we can try.
Click to expand...
Click to collapse
Error 404 for that Recovery.

Liam0102 said:
Error 404 for that Recovery.
Click to expand...
Click to collapse
try again, I have posted the link while the upload was still in progress, should work now
https://dl.dropboxusercontent.com/u/77459918/recovery.img

alray said:
try again, I have posted the link while the upload was still in progress, should work now
https://dl.dropboxusercontent.com/u/77459918/recovery.img
Click to expand...
Click to collapse
It worked great. Thanks!