Database Develop

[Q] soft briked htc one

M7_UL PVT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-4A.17.3250.14
OS-2.24.401.8
eMMC-boot 2048MB
accidently erased my internal memory where i had my TWRP backup. I've tried few RUUs without any luck.
any ways to tranfer these files to internal memory so i could restore them? i can acces bootloader and recovery.
what should i do

4r574n said:
M7_UL PVT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-4A.17.3250.14
OS-2.24.401.8
eMMC-boot 2048MB
accidently erased my internal memory where i had my TWRP backup. I've tried few RUUs without any luck.
any ways to tranfer these files to internal memory so i could restore them? i can acces bootloader and recovery.
what should i do
Click to expand...
Click to collapse
3 methods:
1) adb push
2) adb sideload
3) OTG cable

http://www.androidayos.com/2013/04/...ck-to-stock-installation-guide-and-procedure/
Let me know if you need further direction
Sent from my HTC One using Tapatalk 4 now Free

origin abanowis
nkk71 said:
3 methods:
1) adb push
2) adb sideload
3) OTG cable
Click to expand...
Click to collapse
i can't get adb working in bootloader/fastboot mode, i tried searching from google but no luck

r1tesh said:
Let me know if you need further direction
Sent from my HTC One using Tapatalk 4
the ruu link seems to be down...
Click to expand...
Click to collapse

http://forum.xda-developers.com/showthread.php?t=2242635
Sent from my HTC One using Tapatalk 4 now Free

4r574n said:
i can't get adb working in bootloader/fastboot mode, i tried searching from google but no luck
Click to expand...
Click to collapse
In TWRP use ADB sideload to flash a rom Then flash kernel in fastboot USB and you are good to go :good:

4r574n said:
i can't get adb working in bootloader/fastboot mode, i tried searching from google but no luck
Click to expand...
Click to collapse
you have to be in recovery for adb to work, not bootloader.

http://www.oppoforums.com/threads/how-to-save-your-device-after-a-full-wipe.1907/
ADB Sideload is under advanced in the TWRP recovery.

SOLVED: Tnx for the help, you saved my day side loader worked without any serious issues:good::good:

[Q] htc one noob problems

Hi all, Ok, I have my htc one unlocked the bootloader and have rooted it but somewhere....... Somehow i have wiped the system,I have no factory reset, I can go through the fastboot usb then into recovery with TWRP and now i'm stuck........ If i try to reboot the phone all i get is the device starting up to white htc screen then restarting again, Can i have someone point me in the right direction please.
M7_UL PUT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-4A.17.3250.14
OpenDSP-v31.120.274.0617
OS-2.24.841.1
eMMC-boot 2048MB
Jun 21 2013,23:03:15.0

aratula67 said:
Hi all, Ok, I have my htc one unlocked the bootloader and have rooted it but somewhere....... Somehow i have wiped the system,I have no factory reset, I can go through the fastboot usb then into recovery with TWRP and now i'm stuck........ If i try to reboot the phone all i get is the device starting up to white htc screen then restarting again, Can i have someone point me in the right direction please.
M7_UL PUT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-4A.17.3250.14
OpenDSP-v31.120.274.0617
OS-2.24.841.1
eMMC-boot 2048MB
Jun 21 2013,23:03:15.0
Click to expand...
Click to collapse
install a ROM, using one of those methods:
1- OTG cable
2- adb push <name of rom>.zip /data/media/0/
3- adb sideload <name of rom>.zip (http://forum.xda-developers.com/showthread.php?t=2317986)

nkk71 said:
install a ROM, using one of those methods:
1- OTG cable
2- adb push <name of rom>.zip /data/media/0/
3- adb sideload <name of rom>.zip (http://forum.xda-developers.com/showthread.php?t=2317986)
Click to expand...
Click to collapse
I'll see if i can work out No's 2 and 3.
I tried otg-usb with (bigxie_m7_GPe_KRT16S_odexed-signed.zip) and i got (no md5 visible) it says it's installing but then it says failed to load.

aratula67 said:
I'll see if i can work out No's 2 and 3.
I tried otg-usb with (bigxie_m7_GPe_KRT16S_odexed-signed.zip) and i got (no md5 visible) it says it's installing but then it says failed to load.
Click to expand...
Click to collapse
is that a 4.4 GPE ROM?
4.4 ROMs require TWRP 2.6.3.3+
and 4.4 GPE ROMs usually require S-Off, otherwise they'll bootloop

nkk71 said:
is that a 4.4 GPE ROM?
4.4 ROMs require TWRP 2.6.3.3+
and 4.4 GPE ROMs usually require S-Off, otherwise they'll bootloop
Click to expand...
Click to collapse
how do i updrade to twrp 2.6.3.3 please

aratula67 said:
how do i updrade to twrp 2.6.3.3 please
Click to expand...
Click to collapse
[RECOVERY] TWRP touch recovery v2.6.3.4

Same Problem in addition to adb!
I got the same problem stuck with the start up screen but my problem is i cant see my device in adb! I tried several times but no luck! Any solutions for that?
Thanks...

Nothing, Nada, Zip............
nkk71 said:
install a ROM, using one of those methods:
1- OTG cable
2- adb push <name of rom>.zip /data/media/0/
3- adb sideload <name of rom>.zip (http://forum.xda-developers.com/showthread.php?t=2317986)
Click to expand...
Click to collapse
Hey thanks for your help but i tried all three of these and all i get is failed to load....... Any further hints for me??

aratula67 said:
Hey thanks for your help but i tried all three of these and all i get is failed to load....... Any further hints for me??
Click to expand...
Click to collapse
can you be a bit more specific about the error; maybe copy/paste command prompt.

nkk71 said:
can you be a bit more specific about the error; maybe copy/paste command prompt.
Click to expand...
Click to collapse
Ok, after some more reading and research i've finally managed to load ViperOne 3.5.0 rom. TWRP (2.6.1.0) says it's there and there's a backup done, But in bootloader mode it says S-ON, unlocked and rooted but the htc one just keeps rebooting all the time gets to white screen (htc quietly brilliant) and that's it........ then reboots over and over, until i manually press power and volume down to go to bootloader or recovery screen......
Any ideas?

aratula67 said:
Ok, after some more reading and research i've finally managed to load ViperOne 3.5.0 rom. TWRP (2.6.1.0) says it's there and there's a backup done, But in bootloader mode it says S-ON, unlocked and rooted but the htc one just keeps rebooting all the time gets to white screen (htc quietly brilliant) and that's it........ then reboots over and over, until i manually press power and volume down to go to bootloader or recovery screen......
Any ideas?
Click to expand...
Click to collapse
did you select WIPE in the installer? if not reinstall using WIPE, and in TWRP, wipe cache and dalvik. (it's in Wipe -> Advanced Wipe -> select Dalvik and Cache only, then swipe to wipe)

[Q] Relocking and Flashing to Stock HTC M7 on Bell

Hey community,
I'd really love some help from the experts here. I bought an HTC one that was originally on Bell, and the previous owner had rooted it and flashed Cyanogenmod 10.2 on it. To enter the sim unlock code, I have to flash it back to stock.
Now, I've been spoiled previously by using Nexus devices so I haven't run into this problem before.
What I've done so far:
Followed this guide about half way, to the point where I re-locked the bootloader. (fastboot oem lock)
https://www.youtube.com/watch?v=FZR5yhP75Jg
I got stuck after that, because Bell apparently does note have an excutable RUU file. I've only been able to find nandroid backups.
Right now, I cant get past the bootloader mode.
This is what shows on my screen:
***Tampered***
***Relocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.20.3263.16
openDSP-v32.120.274.0909
OS-3.23.666.1
eMMC-boot 2048MB
Sept 17, 2013
Can anyone please tell me what the next step is? I have two files downloaded, but not sure which to use, or really how.
-M7 CWM Nandroid Backup CID BM___001 1.29.666.5
-Stock_JB_4.3_BM___001_TWRP_3.23.666.1_htc_one_m7
Thank you.

slick2404 said:
Hey community,
I'd really love some help from the experts here. I bought an HTC one that was originally on Bell, and the previous owner had rooted it and flashed Cyanogenmod 10.2 on it. To enter the sim unlock code, I have to flash it back to stock.
Now, I've been spoiled previously by using Nexus devices so I haven't run into this problem before.
What I've done so far:
Followed this guide about half way, to the point where I re-locked the bootloader. (fastboot oem lock)
https://www.youtube.com/watch?v=FZR5yhP75Jg
I got stuck after that, because Bell apparently does note have an excutable RUU file. I've only been able to find nandroid backups.
Right now, I cant get past the bootloader mode.
This is what shows on my screen:
***Tampered***
***Relocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.20.3263.16
openDSP-v32.120.274.0909
OS-3.23.666.1
eMMC-boot 2048MB
Sept 17, 2013
Can anyone please tell me what the next step is? I have two files downloaded, but not sure which to use, or really how.
-M7 CWM Nandroid Backup CID BM___001 1.29.666.5
-Stock_JB_4.3_BM___001_TWRP_3.23.666.1_htc_one_m7
Thank you.
Click to expand...
Click to collapse
re-locking the bootloader is only required to flash ruu which is not an option for your phone (no ruu available for bell). Now you'll need to unlock the bootloader again to flash either TWRP recovery to resotre from a twrp backup or CWM to restore from a CWM backup.
I'll suggest you to flash twrp 2.6.3.3 and ARHD 53 rom. Many users reported successfully sim-unlocked their phones using ARHD rom. If that don't work then you could try with the nandroid backups.

slick2404 said:
Hey community,
I'd really love some help from the experts here. I bought an HTC one that was originally on Bell, and the previous owner had rooted it and flashed Cyanogenmod 10.2 on it. To enter the sim unlock code, I have to flash it back to stock.
Now, I've been spoiled previously by using Nexus devices so I haven't run into this problem before.
What I've done so far:
Followed this guide about half way, to the point where I re-locked the bootloader. (fastboot oem lock)
https://www.youtube.com/watch?v=FZR5yhP75Jg
I got stuck after that, because Bell apparently does note have an excutable RUU file. I've only been able to find nandroid backups.
Right now, I cant get past the bootloader mode.
This is what shows on my screen:
***Tampered***
***Relocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.20.3263.16
openDSP-v32.120.274.0909
OS-3.23.666.1
eMMC-boot 2048MB
Sept 17, 2013
Can anyone please tell me what the next step is? I have two files downloaded, but not sure which to use, or really how.
-M7 CWM Nandroid Backup CID BM___001 1.29.666.5
-Stock_JB_4.3_BM___001_TWRP_3.23.666.1_htc_one_m7
Thank you.
Click to expand...
Click to collapse
unlock bootloader
flash TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
This is from @crushalot instructions on restoring a nandroid backup
Then enter recovery either by holding power and vol down button until bootloader displays and then select recovery or if device is booted into the OS use this adb command:
adb reboot recovery
Now perform a test backup and allow it to complete. Then make a note of the folder in which the backup was created. Now copy the downloaded stock Nandroid into that same folder so that recovery will see the backup and allow you to restore it.
Click to expand...
Click to collapse
For a phone that's not booting up this means pushing the files with adb push
so the command would look like this
adb push 2013-08-08--19-24-38.ATT.502.15 /sdcard/TWRP/BACKUPS/yourSerialno/
these files are over 1.2 gigs sometimes so it takes a long time, be patient
Also be sure the files your pushing are in the same folder as adb

Thanks for the replies ^
Okay, so I have now unlocked my bootloader successfully - however am now stuck in a cyanogenmod bootloop.
What's the best way out of this?I have CWM Recovery V6.0.3.1 I can boot into - is this where I try and install ARHD 53 rom? When I plug the phone into my computer, I can't see it as a drive to copy a rom into.
TIA
***Tampered***
***Unlocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.20.3263.16
openDSP-v32.120.274.0909
OS-3.23.666.1

Also my fastboot options are:
Fastboot
Recovery
Factory Reset
Simlock
Image CRC
Show Barcode.

slick2404 said:
Thanks for the replies ^
Okay, so I have now unlocked my bootloader successfully - however am now stuck in a cyanogenmod bootloop.
What's the best way out of this?I have CWM Recovery V6.0.3.1 I can boot into - is this where I try and install ARHD 53 rom? When I plug the phone into my computer, I can't see it as a drive to copy a rom into.
TIA
***Tampered***
***Unlocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.20.3263.16
openDSP-v32.120.274.0909
OS-3.23.666.1
Click to expand...
Click to collapse
if you want to flash arhd 53 you will need at least twrp recovery version 2.6.3.3 as specified in the ARHD rom thread. Then use either adb push or adb sideload method to transfer the rom on your phone which are explained here

The error I'm getting in CWM Recovery is:
E: can't mount /sdcard
E: can't mount /external _sd
How can I install TWRP Recovery? Sorry, I'm at a loss right now and feel so confused.

alray said:
if you want to flash arhd 53 you will need at least twrp recovery version 2.6.3.3 as specified in the ARHD rom thread. Then use either adb push or adb sideload method to transfer the rom on your phone which are explained here
Click to expand...
Click to collapse
slick2404 said:
The error I'm getting in CWM Recovery is:
E: can't mount /sdcard
E: can't mount /external _sd
How can I install TWRP Recovery? Sorry, I'm at a loss right now and feel so confused.
Click to expand...
Click to collapse
So I've installed TWRP 2.6.3.3 0 but I still can't manage to see the sd card on my computer, how can I push the nandroid backup to this phone? Is it still via fastboot commands?

slick2404 said:
So I've installed TWRP 2.6.3.3 0 but I still can't manage to see the sd card on my computer, how can I push the nandroid backup to this phone? Is it still via fastboot commands?
Click to expand...
Click to collapse
like I said in post #6 you need to either adb push or adb sideload if you want to install a rom. If you want to restore a backup then use adb push to transfer the backup to the phone.
instructions how to adb push or adb sideload linked in post #6

alray said:
like I said in post #6 you need to either adb push or adb sideload if you want to install a rom. If you want to restore a backup then use adb push to transfer the backup to the phone.
instructions how to adb push or adb sideload linked in post #6
Click to expand...
Click to collapse
Thanks for your help.
I was able to push the rom to the /sdcard folder via ADB Push
then from recovery, had to wipe/format all data. I think this created the directories for me
and then i was able to install CM11 again.
now im just trying to figure out how to install the nandroid backup since bell does not have a RUU, It says failed everytime i try in recovery and i have it in the same parent folder as my CM recovery i created.

slick2404 said:
Thanks for your help.
I was able to push the rom to the /sdcard folder via ADB Push
then from recovery, had to wipe/format all data. I think this created the directories for me
and then i was able to install CM11 again.
now im just trying to figure out how to install the nandroid backup since bell does not have a RUU, It says failed everytime i try in recovery and i have it in the same parent folder as my CM recovery i created.
Click to expand...
Click to collapse
like cIsA said you have to push the twrp nandroid in this folder: /sdcard/TWRP/BACKUPS/yourSerialno/
You have to make a backup first for this folder to be created. So make a twrp nandroid backup of the boot partition only (because its light). This will generate the backup path with your s/n + date. Then delete the file inside that folder and replaced it by the nandroid backup you want to restore.

[Q] No OS, don't know how to install one.

pokit.org/get/?126b65769e9c251e7cde859d14a568c9.jpg
I'm stuck in this HBOOT and I don't know what to do to install just the stock ROM just to use my cellphone. What to do?
** TAMPERED **
** UNLOCK **
M7_U PVT SHIP S-ON RH
HBOOT-1.54.000
RADIO-4A.17.3250.14
OpenDSP-V31.120.274.0617
OS-2.24.401.9 (My phone doesn't turn on, it either bootloader or stuck on HTC logo)
eMMC-boot 2048MB

spenzo said:
pokit.org/get/?126b65769e9c251e7cde859d14a568c9.jpg
I'm stuck in this HBOOT and I don't know what to do to install just the stock ROM just to use my cellphone. What to do?
** TAMPERED **
** UNLOCK **
M7_U PVT SHIP S-ON RH
HBOOT-1.54.000
RADIO-4A.17.3250.14
OpenDSP-V31.120.274.0617
OS-2.24.401.9 (My phone doesn't turn on, it either bootloader or stuck on HTC logo)
eMMC-boot 2048MB
Click to expand...
Click to collapse
Do you have a custom recovery? If not flash twrp 2.6.3.3. Then you can push or sideload a Rom to the phone.
---------- Post added at 05:55 PM ---------- Previous post was at 05:49 PM ----------
Use this recovery
http://techerrata.com/file/twrp2/m7/openrecovery-twrp-2.6.3.3-m7.img
Download and put the file in your fastboot folder rename it recovery.img and use these commands to flash the recovery.
Code:
fastboot flash recovery name-of-recovery.img
fastboot erase cache
fastboot reboot-bootloader
Then select recovery from the bootloader menu to boot TWRP Recovery :good:
Put the stock Rom zip in your fastboot folder and rename it rom.zip http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-8-zip/
While on the TWRP home screen connect your usb cable. In the command window type
Code:
adb push rom.zip /sdcard
The command window will appear unresponsive until the push is complete (Several Minutes) When its done Install the Rom with TWRP recovery.
If you want stock with working OTA updates install the Rom with options
Stock Recovery = Yes
Stock Radio =Yes
Root = No
Otherwise choose options to your liking :good:

I will try and reply

---

Danny201281 said:
Do you have a custom recovery? If not flash twrp 2.6.3.3. Then you can push or sideload a Rom to the phone.
...
Click to expand...
Click to collapse
pokit.org/get/img/250e08ad689e2deb53476a8058674b1d.jpg
i'm so lost...what to do?

spenzo said:
pokit.org/get/img/250e08ad689e2deb53476a8058674b1d.jpg
i'm so lost...what to do?
Click to expand...
Click to collapse
You may want to try formatting the device. In TWRP go to "Wipe" then "Format Data" type yes to confirm. Then reboot recovery. And push the Rom again.
Also check the md5 of the rom.zip with the tool www.winmd5.com it should match this.
b576ec69ff7ea86d4be2dbc3a8e15cc0

Danny201281 said:
b576ec69ff7ea86d4be2dbc3a8e15cc0
Click to expand...
Click to collapse
Love you. Thanks, it works.

spenzo said:
Love you. Thanks, it works.
Click to expand...
Click to collapse
Good job, glad to hear you got it done [emoji4]

stuck on boot loop rooted please help

Hi I have a HTC One M7 which is stuck on a boot loop from flashing a custom firmware
Tried entering recovery but it just continues to loop.
Computer recognizes the device but only as its booting not when its in fastboot
Any help would be great thanks
***TAMPERED***
***UNLOCKED***
M7_UL PVT SHIP S-ON
HBOOT-1.54.0000
RADIO-4A.17.3250.14
OpenDSP-v31.120.274.0617
OS-2.24.771.3
eMMC-boot 2048MB
I am running windows 10

dbfox said:
Hi I have a HTC One M7 which is stuck on a boot loop from flashing a custom firmware
Click to expand...
Click to collapse
I guess you mean a custom rom and not a custom firmware since your phone is S-ON....
What file did you tried to flash (provide a link please)
Tried entering recovery but it just continues to loop.
Click to expand...
Click to collapse
What is your recovery (name + version)
Computer recognizes the device but only as its booting not when its in fastboot
Any help would be great thanks
***TAMPERED***
***UNLOCKED***
M7_UL PVT SHIP S-ON
HBOOT-1.54.0000
RADIO-4A.17.3250.14
OpenDSP-v31.120.274.0617
OS-2.24.771.3
eMMC-boot 2048MB
I am running windows 10
Click to expand...
Click to collapse
Make sure you have the latest htc drivers installed on your computer and uninstall HTC sync if its installed on your computer. Boot in bootloader mode, select "fastboot" (if not already in fastboot menu), make sure you see "fastboot usb" in red and type "fastboot devices" to see if your phone is correctly detected.

Thank you for the reply I used Clockworkmod and various different roms
Where can I find the recovery name and version please?
I am going to try Windows 7 as I understand it causes less complications.

dbfox said:
Thank you for the reply I used Clockworkmod and various different roms
Click to expand...
Click to collapse
What roms exactly, I can't help if you don't give precise answers. List all the rom (name + version) you have tried to flash. Are you sure you did only used roms that was made for the M7?
Where can I find the recovery name and version please?
Click to expand...
Click to collapse
First line of text when booted in recovery + you should know the recovery you have flashed.... or you simply flashed a random file?
I am going to try Windows 7 as I understand it causes less complications.
Click to expand...
Click to collapse
Win 10 is fine with hboot 1.54. Only hboot 1.44 is causing problem with Win 8/10
The only thing I can suggest you with the information I have is to flash TWRP and flash this rom which will reset your phone back to stock. When installing the rom, select "yes" to install stock recovery and stock radio and select "no" to root. Do all the ota updates until you are running on the latest version. Once up-to-date, you can reflash a custom recovery (TWRP preferred for the M7) and root the phone again and if you want, flash any custom roms youd like
If you ever considered S-OFF then do it before doing any ota updates using Rumrunner S-OFF (free) because once the hboot is updated, you'll have to use Sunshine S-OFF which will cost 25 USD.

I have managed to get it to communicate now by using windows 7