Hello everybody.... I have a problem. I bought a second hand HTC HD7 , but I had a problem when attempting an upgrade, now when I turn it on it stays on a black screen where appears a phone and a computer (and always happens that). I can access to multicolored screen and this is the information:
PD29110 SS-BC (4K)
SPL-5.12.2550.0(135916) MNG
MicroP(LED) 0x07
TOUCH S1(v2.B,#1625)
SD UNKNOWN 2
Partition Info-v211v413
I want to use my phone, but I dont know what to do, I tried to flash with a lot of roms without success, when i run ROMUpdateUtility.exe, only reachs 1% and then reboots!!
HELP ME, IM DESPERATE PLEASE!!!!
km6n said:
Hello everybody.... I have a problem. I bought a second hand HTC HD7 , but I had a problem when attempting an upgrade, now when I turn it on it stays on a black screen where appears a phone and a computer (and always happens that). I can access to multicolored screen and this is the information:
PD29110 SS-BC (4K)
SPL-5.12.2550.0(135916) MNG
MicroP(LED) 0x07
TOUCH S1(v2.B,#1625)
SD UNKNOWN 2
Partition Info-v211v413
I want to use my phone, but I dont know what to do, I tried to flash with a lot of roms without success, when i run ROMUpdateUtility.exe, only reachs 1% and then reboots!!
HELP ME, IM DESPERATE PLEASE!!!!
Click to expand...
Click to collapse
The flashing went badly and the SD card got corrupted. Get an older official NoDo ROM from
http://www.androidruu.com/index.php?developer=Schubert
and flash it using the Y-cable method. Once you have done that you'll have to do all customizations from the start again, or you can just leave it stock, apply only the official updates. And next time make sure you have a full battery and secure power to the pc before launching the update procedure.
Thanks for your reply...
I tried with 3 different Y-Cables, and nothing happened, also tried with diferent card readers but nothng, i dont know what to do.... i still stuck in that mode, just can enter to 4 colours screen, and usb mode... but i cant do anything... please help me
km6n said:
Thanks for your reply...
I tried with 3 different Y-Cables, and nothing happened, also tried with diferent card readers but nothng, i dont know what to do.... i still stuck in that mode, just can enter to 4 colours screen, and usb mode... but i cant do anything... please help me
Click to expand...
Click to collapse
One last thing to try before selling the phone for parts: follow this http://forum.xda-developers.com/showthread.php?t=883582 and replace your memory card.
Related
Hello Guys,
I'm not sure if this is a right place to ask this question, but X1 is struck on tri color screen. Didn't do anyting, but since this morning... it's just not turning up.
Whenever I boot it up... shows tri color screen & say "loading"... cums back saying no image file & then again shows as following
KOVS110
SPL-0.78.0000
MicroP1-787
Microp2-707
Not sure if anyone else had this problem, but I'd appreciate if you can direct me to a place where it's already been fixed by someone else!
Thanks
Sachin Ghai
Try removing the battrey and wait for 10 seconds...if that helps ok, otherwise, U go in thr tri bootlader screen YOURSELF, (volume down+ power button) Do nothig, just go i the mode and come back..AGAIN< IM NOT AN EXPERT..IM JUST TRYING TO HELP U WITH UR PROBLEM....PLZ TAKE AN EXPERT'S ADVICE..
boLUCK!
Did the exact same thing...still struck at tri color screen...
All SM & Experts..I request you to get me out of this trouble..
Thanks in Advance
try to plug it to your computer via usb.. it happened to my diamond once.
I've already mailed you this
Hallo Sachin,
read the first post of this: http://forum.xda-developers.com/showthread.php?t=431218
You can use two methods, first your pc synced with your device and second the microsd procedure. i prefer the last one.
Here's the procedure for microsd: http://forum.xda-developers.com/showthread.php?t=445662
After you have done this, you can flash any rom you like, read this: http://forum.xda-developers.com/showthread.php?t=446070
So basically what you do is:
1) download hard spl
2) place it on a microsd card ( put it back in your device)
3) Hardspl from microsd ( is also in tricolorscreen)
4) Now you have hardspl'd your device.
5) download a preferred rom
6) put it on the microsd card
7) Flash.
Now your device must work again.
If you have any questions, mail me.
Greetz
If you are trying to flash a custom ROM you need hard-SPL. Follow the instructions the guy above gave to you.
Cheers!
cristidotro said:
If you are trying to flash a custom ROM you need hard-SPL. Follow the instructions the guy above gave to you.
Cheers!
Click to expand...
Click to collapse
I'm not trying to FLASH rom. I'm that techie to do all this.....However... thanx for ur efforts guys...Fortunately...the bootloader came in to normal mode & booted up in normal way... however I'm scared to off it again, as I'm not sure if it'll turn up in normal way again or not.
What do you guys think?
SHALL I HARD RESET or SOFT RESET my phone? WIll either of these solve the problem?
I don't want to play with ROM thing.... just lil scared not to turn my x1 in useless crap..
Is My Phone bricked HELP
It is stuck in the Start up screen "smart mobility" in the middle of the screen with the rom details at the bottom right. It won't go passed this. I tried to put it in boot loader mode so that I could try and reinstall the Rom but phone doesn't recognize the usb - (at the bottom of the boot loader screen it says serial when unpluged and the USB when connected to PC). Any Ideas Plz I connot live without a phone.
The Rom I was last using was the latest Topix ROM
kaisersolo said:
Is My Phone bricked HELP
It is stuck in the Start up screen "smart mobility" in the middle of the screen with the rom details at the bottom right. It won't go passed this. I tried to put it in boot loader mode so that I could try and reinstall the Rom but phone doesn't recognize the usb - (at the bottom of the boot loader screen it says serial when unpluged and the USB when connected to PC). Any Ideas Plz I connot live without a phone.
The Rom I was last using was the latest Topix ROM
Click to expand...
Click to collapse
Did you re-flash the Stock ROM at least once?
Thanks for the Reply
Where can I find the blackstone stock rom.
Sorry to be a pest not used the forums for ages
Why can't you try to flash via microSD ?
Put the ROM image in the root folder of the microSD, named exactly BLACIMG.nbh
Then start the Blackstone in bootloader: you will be prompted to start the flash by pressing the power switch.
Good luck!
Marco
Quality
Cheers Guys who answered my plea for help.
all is well
yahoo!
Glad you got this sorted
Thread closed
sir, i got a x1 from one of my costumer.. the error is when you turn it on, it will show up till the logo of ericsson then it will auto start, again and again...
also you can put the phone in booth mode..
in booth mode, you will see the 4 colours and
KOVS110
SPL-0.72.0000
MicroP1-707
MicroP2-707
what i did is:
tried to update using seus... but wont connect
soft reset.... still same
hard reset....same
i read and search and search the internet about this till i see the MttY1.42.exe... and snoopyPRO and follow the instruction at XDA about this... but still the same...
download program.. app_sw_x1i_generic_it_kovs_r2aa008
and.. app_sw_x1i_vcom_za_cdf1215-0325_kovs_r1aa017
both of them i flash one by one using micro sd.. the flashing was successfull.. but still the same..
is this phone dead or brick... pls help,
what im going to do to make this phone in use again...
advance thank you very much
pls anyone helpppp.... i need it very badly...pls....
my costumer still not pick up this phone... so lm still waiting for your kind reply..pls....pls...
After my last attempt to put some ROM to keep a stable, result is the following - when i try to go in "Download Mode" , at the top left appears a text "KeyPressed,1". I search here, in Google, but nothing.. I think my phone is HARD BRICKED I'm asking for your help, i know you are erudite people, and only you can help me! Thank you, for listening my problem! Thank you!
So am I right that you can't boot your phone? What happens when you turn on your Phone ? Bootloop?
KUN1 said:
So am I right that you can't boot your phone? What happens when you turn on your Phone ? Bootloop?
Click to expand...
Click to collapse
Ive got the exact same problem
Ill explain my problem in more depth
phone bootsup and flashes a pic of the android then goes into recovery mode so cant geto normal phone operations
under advanced , log it says checked for extendedcommand...skipped exection of extendedcommand, file not found...
other interesting thing to note center button does not work ie using only voulume and power switch but the touchscreen back button works
when I try to put in dl mode it does show yellow android but has keypressed,1 on screen as well ,
Computer knows that devise is there but doesn't show it up and Oden 1.7 sometimes picks it up but doesn't successfully update files says it failed
Thanks for your interest
have a read here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
Hi there, I have this HTC HD7 I bought it from a friend, the phone is stuck at boot screen, I noticed the phone did not have a Micro SD card so I thought that was the issue, I have placed a 8 gb SD card in it but still doesn't work, I've been trying to flash it to reinstall Windows on it but I have read the whole forum up and down and I'm not able to find a solution for this phone.
in the bootloader screen I have these details
PD29110 SS-BC (4K)
SPL-5.12.2250.0 (135916) MNG
MicroP(LED) 0x07
TOUCH S1(v1.7,#1624)
SD SANDISK 7580MB
Partition Info-v211v413
Please help!! I've been struggling with this for weeks!!!
rcmalonso said:
Hi there, I have this HTC HD7 I bought it from a friend, the phone is stuck at boot screen, I noticed the phone did not have a Micro SD card so I thought that was the issue, I have placed a 8 gb SD card in it but still doesn't work, I've been trying to flash it to reinstall Windows on it but I have read the whole forum up and down and I'm not able to find a solution for this phone.
in the bootloader screen I have these details
PD29110 SS-BC (4K)
SPL-5.12.2250.0 (135916) MNG
MicroP(LED) 0x07
TOUCH S1(v1.7,#1624)
SD SANDISK 7580MB
Partition Info-v211v413
Please help!! I've been struggling with this for weeks!!!
Click to expand...
Click to collapse
just do a hard flash your phone will be ok. .remember htc hd7 support good sd card....for hard flash use press power button,both volume keys at a time...now do according to command..it's simple....if you find me helpful please click on thanks.remember after hard flash when it's start it will take sometime to install application...actually it depends on your sd card data speed...
I tried that already, I was trying to flash stock rom to it with no success, I tried with one of the roms provided bu Ansar but I get an error when I try to flash it
Sent from my GT-I9300 using XDA Free mobile app
rcmalonso said:
I tried that already, I was trying to flash stock rom to it with no success, I tried with one of the roms provided bu Ansar but I get an error when I try to flash it
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
u should use gold card method and flash a stock rom.
your spl is 5 so u cant flash custom rom like ansar...
Where I can get the stock ROM???
Sent from my GT-I9300 using XDA Free mobile app
http://androidruu.com/?developer=Schubert
use europe (401) roms...
use europe (401) roms...[/QUOTE]
I am also stuck on HTC LOGO ,
by pressing vol-down+power,
my htc hd7 displays
PD29100 SS-BC(4K)
SPL-5.11.2250.0(134578)MNG
MicroP(LED) Ox07
TOUCH S1(v1.8, #1624)
SD SANDISK 7580MB
Partition Info-v211v413
what rom should i use ? kindly help.