Good afternoon all,
I have an HTC One PN072. I've flashed the phone from Sprint to Cricket. They were very adamant about me not "resetting" the phone as it will remove the information, or flash they've added.
I've done several searches and can't seem to find a thread indicating 1) if this is possible and 2) a guide to doing so. The phone already is rooted and has TWRP on it as well.
If anyone knows of a thread I would love a link to a guide.
heartspains88 said:
Good afternoon all,
I have an HTC One PN072. I've flashed the phone from Sprint to Cricket. They were very adamant about me not "resetting" the phone as it will remove the information, or flash they've added.
I've done several searches and can't seem to find a thread indicating 1) if this is possible and 2) a guide to doing so. The phone already is rooted and has TWRP on it as well.
If anyone knows of a thread I would love a link to a guide.
Click to expand...
Click to collapse
I have a Sprint One fully flashed to Verizon and I flash custom ROMs all the time without any problems. I have never lost any settings and I don't even have to re-activate my phone. I would think that as long as you dont use Bootloader to flash a complete RUU image you should be fine. Goin s-off if your not already might cause issues here as well. (If someone knows for sure please correct me) I would say just download a ROM and install it with TWRP. I have updated firmware as well with no issues as well, however the firmware I upgraded with did not contain a radio update, which I am hesitant to do since I imagine that will effect my flash. I did my flash myself but it seems like a headache re-doing it.
electroblood said:
I have a Sprint One fully flashed to Verizon and I flash custom ROMs all the time without any problems. I have never lost any settings and I don't even have to re-activate my phone. I would think that as long as you dont use Bootloader to flash a complete RUU image you should be fine. Goin s-off if your not already might cause issues here as well. (If someone knows for sure please correct me) I would say just download a ROM and install it with TWRP. I have updated firmware as well with no issues as well, however the firmware I upgraded with did not contain a radio update, which I am hesitant to do since I imagine that will effect my flash. I did my flash myself but it seems like a headache re-doing it.
Click to expand...
Click to collapse
The wipes in TWRP usually recommended before flashing a custom rom don't remove their flashed data?
heartspains88 said:
The wipes in TWRP usually recommended before flashing a custom rom don't remove their flashed data?
Click to expand...
Click to collapse
Not that I have ever experienced. That was true on my EVO LTE and has so far been true on my One. I have the newest TWRP and in the past two days I have flashed EclipticOne, Elegencia and Insert Coin. On my old Droids Clockwork recoveries reset worked fine as well. DONT do a factory reset from inside the ROM. I have not tried it on my One, but on my EVO and my Droid 1/2/3 phones that would undo parts of a flash and I would have to reactivate. If I were you I would just work within my current firmware and flash what was available.
It is possible for you to flash your phone back to Cricket for free but its requires a lot of setup and can be a real pain in the ass. Getting 3G on Verizon was particularly painful and I have many screen shots and pages of notes on the actual procedure. When I upgraded from my EVO to the One I managed to get it right the first time by following my notes but it was still a serious hassle.
electroblood said:
Not that I have ever experienced. That was true on my EVO LTE and has so far been true on my One. I have the newest TWRP and in the past two days I have flashed EclipticOne, Elegencia and Insert Coin. On my old Droids Clockwork recoveries reset worked fine as well. DONT do a factory reset from inside the ROM. I have not tried it on my One, but on my EVO and my Droid 1/2/3 phones that would undo parts of a flash and I would have to reactivate. If I were you I would just work within my current firmware and flash what was available.
It is possible for you to flash your phone back to Cricket for free but its requires a lot of setup and can be a real pain in the ass. Getting 3G on Verizon was particularly painful and I have many screen shots and pages of notes on the actual procedure. When I upgraded from my EVO to the One I managed to get it right the first time by following my notes but it was still a serious hassle.
Click to expand...
Click to collapse
i was thinking about getting my one flashed to verizon but how does it work?? say i get my phone flashed.. is it verizon pre paid?? does that come with unlimited data?? text & talk?? how much would my bill be a month? sorry for all the questions
I apologize, so just to be as clear as possible, if you follow all of the wipes that roms usually ask you to perform in TWRP then you should be fine? However, do not perform a factory reset in the rom itself once loaded?
Doing a wipe through TWRP's wipe feature is fine as long as you dont go into 'Advanced' and mess with settings. Do not do the factory reset within the ROM once the ROM is loaded. If, while installing a ROM, the installer wants to do a wipe, that is fine as well.
Related
Ok so I got my hero about a month ago and upgraded to 2.1 last week. Terrible decision...wish I could take it back...but I hear that if you root your phone and use a custom ROM you can actually have a pretty decent experience with your phone using 2.1 I can't even list how many problems and how slow 2.1 is.
I do not know a lot at all about rooting a phone, I never have before, and the tutorials on unlocker seem to be out-dated with the 1.5 software so nothing is working for me. I have the ADP setup on my computer, I'm just wondering what's the easiest and most up to date way to root my Sprint HTC Hero so I can use a custom ROM. Any help is appreciated, thank you.
**If your software/build number (2.27.651.X) ends in 6, you must download and run this RUU first to be able to use the root exploit on your phone. If it ends in .5, skip this and click the link in the next sentence.**
Try this and if you follow it correctly, you'll be able to root your phone and be able to nandroid, and flash custom roms and what not.
Final note, all of the user data/settings on your phone will be reset, so it will be like having a brand new phone out of the box. Just an FYI.
Thank you I have successfully rooted my phone...but I'm having trouble connecting to the internet now. I cannot receive any weather data and have no internet connection at all.
I"m having the same problem, even after I set back to factory default. Not sure what I did wrong.
Gnfghtr said:
I"m having the same problem, even after I set back to factory default. Not sure what I did wrong.
Click to expand...
Click to collapse
What problem(s) are you having in particular? Not being able to root?
ive had the phone since at&t had it on display. rooted it and had various roms for the last couple years and never had any serious issues. last night i flashed jellycream v2 and then did a factory reset inside the rom. the phone prompted that it would reboot twice and that it was normal. it rebooted into twrp and did nothing afterwards. i rebooted it from the recovery and all it did was reboot back into recovery. i decided to flash a different version of twrp and still the same. then flashed clockwork and still got the same result. i wiped the bootloader and basically went through the rooting process again. flashed the latest version of twrp and the phone is still only booting into recovery.
i am at a loss because this is as far as my knowledge goes. its like the phone is stuck still trying to wait for that factory reset from the jellycream rom or something and it wont do anything else but load TWRP.
If factory hard reset will not work (with phone off, press power and volume up together for some seconds. You might want to try also holding home on the touch screen.) flashing firmware will fix it unless you have hardware failure, which I doubt.
http://forum.xda-developers.com/showthread.php?p=39269819
Part 1 can be tricky, so take your time and get that right before proceeding.
drastic00 said:
If factory hard reset will not work (with phone off, press power and volume up together for some seconds. You might want to try also holding home on the touch screen.) flashing firmware will fix it unless you have hardware failure, which I doubt.
http://forum.xda-developers.com/showthread.php?p=39269819
Part 1 can be tricky, so take your time and get that right before proceeding.
Click to expand...
Click to collapse
so far i get the grey LG screen with 'booti mmc_read xxxx' at the upper left with the hard reset. it only takes 2 seconds to show up but the phone shuts off if i continue to hold the power and volume buttons. ill read up on that link here.
I missed that you wiped bootloader. You need that . So you could maybe just install the wkpark bootloader in recovery. You would do 1 and 3 here (1.25a file is down the page)
http://forum.xda-developers.com/showthread.php?p=39130435
I think Jellycream actually requires you have it, if I remember correctly.
Not sure why factory reset would cause that issue, but it will definitely not start without bootloader.
Flashing firmware will also write the (stock) bootloader if that does not do it. It will also reinstall the OS if system is corrupt or missing.
I can't find the thread for Jellycream2. Would you post a link? Are you sure it is for P920/P925 (same device, one is AT&T branded. I have the Thrill P925). If it is not for those device numbers, you may need xbsall's unbrick guide.
Also, if Jellycream2 is based on ICS and you were on a GB ROM, you would likely have needed to first upgrade to ICS and then install the ROM.
I'm just trying to understand why a factory reset could brick your phone...
drastic00 said:
I can't find the thread for Jellycream2. Would you post a link? Are you sure it is for P920/P925 (same device, one is AT&T branded. I have the Thrill P925). If it is not for those device numbers, you may need xbsall's unbrick guide.
Also, if Jellycream2 is based on ICS and you were on a GB ROM, you would likely have needed to first upgrade to ICS and then install the ROM.
I'm just trying to understand why a factory reset could brick your phone...
Click to expand...
Click to collapse
ok basic rundown of what i did in the last year;
when first played around with rooted it about a year ago i used all-in-one to do it. i had already upgraded to ics using the lg mobile support tool prior to rooting. rooting went off fine until i installed a Beats Audio app from the play store. when the phone rebooted after it would be stuck at the grey LG logo. i didnt know what to do so i used twrp and wiped the whole phone. then i used all-in-one and flashed the ICS bootloader and did the flash kernel 4 fix or something its one of the last options to do. then using twrp i flashed ICS_V20_P20, Stock_V20P_Rooted, and a Thrill Update, the phone rebooted fine in an ICS rom but it ran like complete ****, so i tried various roms and the one i settled with was called OptimusRS V1. i used that up until 2 days ago when i flashed the jellycream rom.
after i factory reset that i tried to flash the different wkpark bootloader and twrp that came with the megatron tool hoping that would fix the issue. but it did so i reflashed the original twrp and ics bootloader from all-in-one.
failed to mention this before but i tried 3 different recovery files in between each attempt and it would flash and reboot fine but the phone would still do the same thing and just load recovery.
ill find links when i get off work today. thats the basic history of the phone though.
Hmm. Stil not sure then . Maybe a corrupt zip or you wiped something important. Flashing with LG Flashtool should recover it. And always make a Nandroid backup before installing anything from recovery.
http://forum.xda-developers.com/showthread.php?t=2392309
thats the jellycream rom.
im downloading the files for your xbsa rom at the moment. i do remember yesterday when i used the megatron tool i saw an option to flash the stock bootloader and recovery. i tried it but all i got was the pink LG logo then a security error message below it and the phone shut off.
Oh, ok, OptimusRS's ROM.
Hmm, I thought v20 was GB or something... If it is not ICS then that would be the problem. Also it does say there you need wkpark bootloader for that ROM.
Also, xbsall's v28B includes recovery but it is in system partition. I don't know if that ROM requires you install it from recovery partition or not.
If you still want Jellycream you should be able to flash xbsall's ICS v28B (the normal partitions one, not large partitions), then install wkpark bootloader 1.25a in recovery, then the ROM.
drastic00 said:
Oh, ok, OptimusRS's ROM.
Hmm, I thought v20 was GB or something... If it is not ICS then that would be the problem. Also it does say there you need wkpark bootloader for that ROM.
Also, xbsall's v28B includes recovery but it is in system partition. I don't know if that ROM requires you install it from recovery partition or not.
If you still want Jellycream you should be able to flash xbsall's ICS v28B (the normal partitions one, not large partitions), then install wkpark bootloader 1.25a in recovery, then the ROM.
Click to expand...
Click to collapse
well that breaks down that a bit better. my progress at the moment is step f6. when i connect the phone nothing installs though. it just reconnects and disconnects every second or so. im guessing its because i already have those files. dunno though. i cant get my pc to install the adb drivers for the life of me when the phone is connected in recovery mode.it sees the new hardware just cant find the files.
actually i got it. for some reason the phone wouldnt install anything until i put the battery back in at that step. i continued successfully to step M. the phone is setting up my google account at the moment.
will flashing the baseband be necessary if my apn and sim work like the phone is now? my provider is h20(canadian i heard) but im the usa.
HUGE thanks regardless
Cool :thumbup::beer:
The no battery part is just for driver install, which is fiddly for this phone. Sometimes trial and error is a factor.
The baseband you have now would be the one you had previously. If it works, no problem. The one in the v28B pack is supposed to be optimized for the v28B .bin file, but hey, whatever works.
drastic00 said:
Cool :thumbup::beer:
The no battery part is just for driver install, which is fiddly for this phone. Sometimes trial and error is a factor.
The baseband you have now would be the one you had previously. If it works, no problem. The one in the v28B pack is supposed to be optimized for the v28B .bin file, but hey, whatever works.
Click to expand...
Click to collapse
im only getting E for data. i tried to flash a baseband meant for at&t but it says failed after about 90 seconds. still no 4g though. i did flash the xbsav8 before i set my apn up. i might just go with an optimusRS rom again though. i was happy with it. probably not jellycream this time.
Baseband fail after 80 or so sec is normal. It means it worked. Check your baseband in android settings/about phone.
You might try speed test app to compare actual speed. ATT 4G icon is a lie on this phone IMO.
Now that your pc is set up you can flash any P925/920 bin. Kdz files (combo of bin and fls, there is another tool for flashing those files) can be extracted into separate bin and fls, but I have not done it. The advantage is you can flash baseband separately.
Xbsalls vX3D (see his page) with the P925G fls file gives me 4G icon on Straight Talk in the US, but I like his vR3D better, and I can't tell a speed difference, honestly.
I have not actually measured the speed in either, however.
And for either of those ROMs, you must flash his large partition version of v28B first...very important.
oh its definitely like 2g speeds. its pretty slow. i tried using my providers app and website and its saying the phone i have isnt registered to them anymore so it might be just that. if thats the case ill just bring it in so they can do that for me. when i rooted it the first time i wasnt getting any data and they had to re-register the phone to get it to work right.
my baseband says OMAPP4430/XMM6260. for comparison and/or confirm differences. i have no idea lol.
side question though; my sdcard still has recovery files for the optimusRS v1 rom i had on it. i really liked the setup i had when i made the recovery for it. Im tempted to reinstall it but im really not too sure if itll work or worse harm my phone again.
Lots of variables, but you must remember that xbsall's P940 recovery app he he uses has recovery in system partition. The recovery you had before was probably in recovery partition. They write restores from two different places. Probably you would get an error, but not positive. Understanding that may take some Googling...
If you try it, back up before trying to restore the old backup. Then you could hopefully restore if the restore fails, know what I mean?
Probably the safest thing is to use the all in one tool to install recovery in recovery partition and use that one to restore backup.
I do know when I have restored backups, I have wiped Dalvik, Cache, and Factory Reset (in recovery) and then restore. Then it works. Some people wipe system too.
You can usually flash to recover from a problem, but then you have to set your phone up again
Well I recovered everything. All settings and personalized stuff. Just everything. Everything is running normal again. Just now my data is saying im using an h20 microcell instead of just H20 with a 4g connection. This 2g stuff is for the birds. I'm almost thinking the firmware we flashed has something to do with it. The phone is functional though. Just slow and no mms. I haven't been able to find much on the forums about it. I'll poke around more tomorrow.
Sent from my LG-P920 using xda app-developers app
I'd try another baseband.
[MANDATORY INTRODUCTORY SENTENCE DEPLOYED] Okay so as the title states I have an issue with my Sprint HTC One (m7) [MANDATORY INTRODUCTORY SENTENCE Complete].
The issue in question is lack of GPSability after flashing (you guessed it) Cyanogenmod 11 and currently CM12. I have tried multiple ROMs since then and all of them either don't fix the issue or wont install or work at all. So now I'm back to CM12 and everything works terrifically except for GPS...which I need...alot.
Now of all the research I've done on finding a fix for this infuriating problem has led me to believe that the only real way to fix this is to flash to a stock ROM, get a GPS fix/lock/signal/whathaveyou and then wipe and flash back over to your ROM of choice HOWEVER....heh heh I kinda un-acquired my backup, it somehow got erased during some blunder during the initial rooting process and I was dumb enough to not have saved a backup on my pc...oops.
Now I am aware that there are other ways of restoring my device to stock by other means such as RUU processes but I am not able to perform this process as my internet connection on my pc is dependent on my phone itself via tethering.
I also know that some have had luck by flashing new kernels however I have not been able to find one that worked for me.
So I guess what I'm asking is does anyone know of any other way I could restore my phone to stock using methods that don't require my pc to be connected to the internet, know of a place where I can find a flashable stock ROM or simply just fix my GPS issue outright?
I appreciate any assistance anyone can offer. Thank you in advance.
blink.riddle said:
[MANDATORY INTRODUCTORY SENTENCE DEPLOYED] Okay so as the title states I have an issue with my Sprint HTC One (m7) [MANDATORY INTRODUCTORY SENTENCE Complete].
The issue in question is lack of GPSability after flashing (you guessed it) Cyanogenmod 11 and currently CM12. I have tried multiple ROMs since then and all of them either don't fix the issue or wont install or work at all. So now I'm back to CM12 and everything works terrifically except for GPS...which I need...alot.
Now of all the research I've done on finding a fix for this infuriating problem has led me to believe that the only real way to fix this is to flash to a stock ROM, get a GPS fix/lock/signal/whathaveyou and then wipe and flash back over to your ROM of choice HOWEVER....heh heh I kinda un-acquired my backup, it somehow got erased during some blunder during the initial rooting process and I was dumb enough to not have saved a backup on my pc...oops.
Now I am aware that there are other ways of restoring my device to stock by other means such as RUU processes but I am not able to perform this process as my internet connection on my pc is dependent on my phone itself via tethering.
I also know that some have had luck by flashing new kernels however I have not been able to find one that worked for me.
So I guess what I'm asking is does anyone know of any other way I could restore my phone to stock using methods that don't require my pc to be connected to the internet, know of a place where I can find a flashable stock ROM or simply just fix my GPS issue outright?
I appreciate any assistance anyone can offer. Thank you in advance.
Click to expand...
Click to collapse
The RUU will work just download it and run it from your pc
If your not on 6.x firmware yet use this
Sprint 5.xx RUU
http://forum.xda-developers.com/showthread.php?t=2795856
clsA said:
The RUU will work just download it and run it from your pc
If your not on 6.x firmware yet use this
Sprint 5.xx RUU
http://forum.xda-developers.com/showthread.php?t=2795856
Click to expand...
Click to collapse
I forgot it was Rumrunner that needed internet conection to work, the RUU simply wouldn't work, again this time was no different. But, BUT, BUUUUUT, thanks to that link I WAS able to get access to answers that eventually solved my problem both primary AND secondary. Was able to get back to stock via a Stock Rooted Rom AND achieved GPS lock with CM12. You have my eternal thanks my friend. Your link opened the road to answers that two months of googling couldn't answer.
Hello,
I rooted and unlocked my HTC Desire 510 (Cricket) ages ago and I have an update for security patches which I cannot run because my phone just keeps rebooting into TWRP recovery and therefore does not install the latest update. I heard you have to flash the phone back to stock ROM but I'm not sure how to go about doing that. I am willing to restore my phone back to 100% stock if anyone knows how I can do that.
Thank you.
You have to relook the bootloader
Flash stock rom
Apply your ota updat
And after you can unlook again and flash recovery
mobbdeep said:
Hello,
I rooted and unlocked my HTC Desire 510 (Cricket) ages ago and I have an update for security patches which I cannot run because my phone just keeps rebooting into TWRP recovery and therefore does not install the latest update. I heard you have to flash the phone back to stock ROM but I'm not sure how to go about doing that. I am willing to restore my phone back to 100% stock if anyone knows how I can do that.
Thank you.
Click to expand...
Click to collapse
IMO.... Update isn't worth the time involved needed to install it. Installed on my wife's totally out of the box stock 510....esy,but couldn't really see a difference. Left my rooted nonsense ROM alone. It's been quite a while now and haven't noticed a difference. Your call, that's just my two cents worth
CSP III said:
IMO.... Update isn't worth the time involved needed to install it. Installed on my wife's totally out of the box stock 510....esy,but couldn't really see a difference. Left my rooted nonsense ROM alone. It's been quite a while now and haven't noticed a difference. Your call, that's just my two cents worth
Click to expand...
Click to collapse
I ended up finding someones stock recovery image dump around here after doing some searching and it worked out fine. The only reason I ever actually rooted my device was to use Helium to do full backups of my phone such as Apps and App Data.
Hi all,
I am I a position where I can get unlimited tethering, of which I am grateful for. I purchased the phone from Vodaphone and then moved to another provider. Because its a third party phone, tethering is not detected.
So, I accidentally updated the software version of the 510 to 1.51.161.12 and then to 1.51.161.14 and my tethering application took a MASSIVE hit.
Tethered to an Xbox one, I now get huge packet loss, very low MTU, huge latency and slow speeds, which was not present before the update. I have contacted the HTC devs to let them know about the issue. I have already troubleshooted all my devices, factory reset, wiped the cache etc...
I wish to roll back the version. I realise in order to do this I will need to root my phone and flash a ROM. The only Kernel I could find was on the htcdev website and was version 1.51.161.10 from vodaphone. Is this a stock ROM?
Can anyone assist me in safely flashing my phone, I have never done this before and I would like to keep my unlimited tethering and phone in working condition. I did Google it but I couldn't find any decent results.
What is a safe guide to follow? I am completely inexperienced at this and would really appreciate the help.
Is dip_spits guide appropriate for a a UK carrier, does it matter? I almost used this guide
https://support.digitalendpoint.com/hc/en-us/articles/204812787-How-to-root-the-HTC-Desire-510 -until I realised that I need philz recovery for 64bit. Will using the dip_spit guide lock my carrier again?
What ROM can I use after rooting. Why is it so hard to find information on HTC 510 rooting and ROMs
I am looking for a safe way of doing this and have posted multiple times on XDA, but nobody can help me. The reason I am doing this is to restore functionality to my tethering, which has broken for no apparent reason.
Thanks
Benjive said:
Hi all,
I am I a position where I can get unlimited tethering, of which I am grateful for. I purchased the phone from Vodaphone and then moved to another provider. Because its a third party phone, tethering is not detected.
So, I accidentally updated the software version of the 510 to 1.51.161.12 and then to 1.51.161.14 and my tethering application took a MASSIVE hit.
Tethered to an Xbox one, I now get huge packet loss, very low MTU, huge latency and slow speeds, which was not present before the update. I have contacted the HTC devs to let them know about the issue. I have already troubleshooted all my devices, factory reset, wiped the cache etc...
I wish to roll back the version. I realise in order to do this I will need to root my phone and flash a ROM. The only Kernel I could find was on the htcdev website and was version 1.51.161.10 from vodaphone. Is this a stock ROM?
Can anyone assist me in safely flashing my phone, I have never done this before and I would like to keep my unlimited tethering and phone in working condition. I did Google it but I couldn't find any decent results.
What is a safe guide to follow? I am completely inexperienced at this and would really appreciate the help.
Is dip_spits guide appropriate for a a UK carrier, does it matter? I almost used this guide
https://support.digitalendpoint.com/hc/en-us/articles/204812787-How-to-root-the-HTC-Desire-510 -until I realised that I need philz recovery for 64bit. Will using the dip_spit guide lock my carrier again?
What ROM can I use after rooting. Why is it so hard to find information on HTC 510 rooting and ROMs
I am looking for a safe way of doing this and have posted multiple times on XDA, but nobody can help me. The reason I am doing this is to restore functionality to my tethering, which has broken for no apparent reason.
Thanks
Click to expand...
Click to collapse
Okey.....a lot of questions.
Firstly, if you are 64 bit there is no need to use philiz touch recovery. There is TWRP recovery for our device. You can get it here:http://twrp.me Don't search HTCDev for 64bit ROM's. The only thing there are kernel source files. The carrier lock is not in any way connected with the operating system (at least thats what I think). And it's highly doubtful that the lock will reapear. The reason that you can't find a lot of guieds about our device it's mainly because the majority of devs here on XDA are from the USA. In the USA they sell the 32 bit version of the phone and the software is very different from the 64 bit.
Now lets talk about ROM's.
If you want pure stock rom you can search for it here mega:///#F!3Zo10Zya!-NbM_2RWWecFlc5mH9bLbA
If you want a custom rom you can get this one http://forum.xda-developers.com/desire-510/htc-desire-510-64-bit-eu--international-version/cyanogenmod-12-1-msm8916-64bit-t3281744
And if you'd like a debloated version of the stock you can get this one: http://forum.xda-developers.com/desire-510/htc-desire-510-64-bit-eu--international-version/android-4-4-3-stock-os-debloated-64bit-t3361689
denny.hell said:
Okey.....a lot of questions.
Firstly, if you are 64 bit there is no need to use philiz touch recovery. There is TWRP recovery for our device. You can get it here:http://twrp.me Don't search HTCDev for 64bit ROM's. The only thing there are kernel source files. The carrier lock is not in any way connected with the operating system (at least thats what I think). And it's highly doubtful that the lock will reapear. The reason that you can't find a lot of guieds about our device it's mainly because the majority of devs here on XDA are from the USA. In the USA they sell the 32 bit version of the phone and the software is very different from the 64 bit.
Now lets talk about ROM's.
If you want pure stock rom you can search for it here mega:///#F!3Zo10Zya!-NbM_2RWWecFlc5mH9bLbA
If you want a custom rom you can get this one http://forum.xda-developers.com/desire-510/htc-desire-510-64-bit-eu--international-version/cyanogenmod-12-1-msm8916-64bit-t3281744
And if you'd like a debloated version of the stock you can get this one: http://forum.xda-developers.com/desire-510/htc-desire-510-64-bit-eu--international-version/android-4-4-3-stock-os-debloated-64bit-t3361689
Click to expand...
Click to collapse
Ok so here is what happened when I rooted.
I unlocked the boot loader and made a recovery using philz touch. The PROBLEM is that I didn't have an SD card installed so what happened is philz touch partioned part of my phones memory. So I go to root and it is successful.
Now I got to recovery to install back the system because I was not happy with the way some of the apps were running and I want to install the stock vodpahone RUU on zubaggys page. I go ahead and recover but now it has taken more memory. I am now running my old ROM and kernel with less than 1 gig of free memory!!
All I want to do now is reinstall the stock vodaphone
Another question. When I was rooted, I downloaded barnacle tether and messed with the transmit power in the settings. I disabled and uninstalled. I also downloaded port forwarder ultimate and messed with the setting but uninstalled.
Will this affect my ROM installation, will it be fresh.
Thanks.
Benjive said:
Ok so here is what happened when I rooted.
I unlocked the boot loader and made a recovery using philz touch. The PROBLEM is that I didn't have an SD card installed so what happened is philz touch partioned part of my phones memory. So I go to root and it is successful.
Now I got to recovery to install back the system because I was not happy with the way some of the apps were running and I want to install the stock vodpahone RUU on zubaggys page. I go ahead and recover but now it has taken more memory. I am now running my old ROM and kernel with less than 1 gig of free memory!!
All I want to do now is reinstall the stock vodaphone
Another question. When I was rooted, I downloaded barnacle tether and messed with the transmit power in the settings. I disabled and uninstalled. I also downloaded port forwarder ultimate and messed with the setting but uninstalled.
Will this affect my ROM installation, will it be fresh.
Thanks.
Click to expand...
Click to collapse
If philiz touch partitioned the phone then it's a miracle that it's still working. At this point I will suggest you flash TWRP because it has a more clean interface and there is no way you'd mess up something. Afterwards use it to format every single partition you can find with it. Beware that with this you will delete all data including the OS. I am not 100% percent that this will work because I haven't seen a situation like yours.
denny.hell said:
If philiz touch partitioned the phone then it's a miracle that it's still working. At this point I will suggest you flash TWRP because it has a more clean interface and there is no way you'd mess up something. Afterwards use it to format every single partition you can find with it. Beware that with this you will delete all data including the OS. I am not 100% percent that this will work because I haven't seen a situation like yours.
Click to expand...
Click to collapse
Jeez, I guess i have got myself in a bit of a sticky situation. I followed dips rooting procedure and it explicitly stated not to use twrp and use Philz touch instead for 64 bit phones. It also didn't state to use an Sd card.
We are talking in two threads here, so I suggest, to help other users with a stock revert, that we continue in Zubaggys thread. You are being a great help and I really appreciate you giving me your time.