I guess my USB is broken, I have a QTEK 9100 and in bootmode the usb information doesnt appear in the white bar... I can only syncronize through bluetooth... what can I do? any Ideas? please help me
Can I flash without USB?
It stills charges with the usb cable please guys help me... sorry but help Im relly lost
Is there a complete package so I could upload to SD card and install or something like that?
I have triend everything to try to put usb working again and nothing
dmsma said:
I guess my USB is broken, I have a QTEK 9100 and in bootmode the usb information doesnt appear in the white bar... I can only syncronize through bluetooth... what can I do? any Ideas? please help me
Can I flash without USB?
It stills charges with the usb cable please guys help me... sorry but help Im relly lost
Is there a complete package so I could upload to SD card and install or something like that?
I have triend everything to try to put usb working again and nothing
Click to expand...
Click to collapse
Nopes ! You cannot flash through BlueTooth,there has to be a physical connection between phone and pc via usb.
Which thing is not working,your usb cable or mini usb port of the phone,if it's usb cable plug,you can get a new usb cable,but if it's the mini usb port of the phone then you'll either have to get it replaced or repaired.
No,there's no such complete package,which you can flash through Sdcard method.Only the Rom Backup,which you create of your Rom on the Sdcard can only be backup to your phone,no other backup created of anyther phone can be flashed,as every backup has significant data stored on the Sdcard of that phone only.
Try to find out which part is faulty,usb cable or the mini port,try to wiggle the usb cable a little to check if it establishes the connectivity through Activesync.
Cheers
Hello friend
My SGS giving me weird problem the phone does not detect any usb mode (kies,MTP,Mass storage even debugging mode).
when i connect the usb its show nothing but only charging
anybody know any solution
khan_frd2002 said:
Hello friend
My SGS giving me weird problem the phone does not detect any usb mode (kies,MTP,Mass storage even debugging mode).
when i connect the usb its show nothing but only charging
anybody know any solution
Click to expand...
Click to collapse
could be due to USB cable damaged internally or try options in My Android Solutions link below
Or try to install latest USB Samsung drivers on your PC.
Sent from my GT-I9000 using Tapatalk 2
Hello I have problem with V28c, I installed it and after week I can't connect my LG to pc, when I connect it finds it as "Unknown device" and shows"Windows has stopped this device because it has reported problems. (Code 43)", I have tryed take off battery, factory reset, all pc connections, restart pc, changed USB cables, changed USB ports, in S/W Update mode it don't connect to pc, and I can't do something with it! Help me please!
MozeAngel said:
Hello I have problem with V28c, I installed it and after week I can't connect my LG to pc, when I connect it finds it as "Unknown device" and shows"Windows has stopped this device because it has reported problems. (Code 43)", I have tryed take off battery, factory reset, all pc connections, restart pc, changed USB cables, changed USB ports, in S/W Update mode it don't connect to pc, and I can't do something with it! Help me please!
Click to expand...
Click to collapse
Got the latest drivers installed? Maybe your usb port broke... check if there maybe is dirt in your usb port. Also if you have the chance, try to use another pc, just in case your pc is the problem. Had the same problem once
Sent from my LG-P970 using xda app-developers app
N00BY0815 said:
Got the latest drivers installed? Maybe your usb port broke... check if there maybe is dirt in your usb port. Also if you have the chance, try to use another pc, just in case your pc is the problem. Had the same problem once
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Latest drivers installed, I have tryed front and back USB ports and other USB cable. No changes. Now I can't try on other pc
my pc don't recognize my lg p970
MozeAngel said:
Latest drivers installed, I have tryed front and back USB ports and other USB cable. No changes. Now I can't try on other pc
Click to expand...
Click to collapse
i have an lg p970..when i connect it to my pc it not recognize him but the phone is chraging..it's the only thing that the phone does when i connect it to pc.(cammera is not working,it's not vibrating and it dosen't recognize my sd card) sorry for my bad english PLEASE HEL ME!!!!
Hello people
I'm new here, in terms of asking questions and seeking help
I have the LG Optimus P970
A few days ago I made the update to ICS, and by proceeding with this page, hackmyandroid.com/optimus-black-p970-official-ics-update/3299
After that, not impossible to connect the phone to a PC, even the software update mode, it can not recognize, anyway to connect it just throws a slow charging.
Is there someone who knows what it is.
I'd love to go back to the old software, but there is no way to detect it pc
Sorry for my bad english
Thanks in advance
I forgot to say, before the update, and my computer still recognize the phone, connecting it over sony usb cable, now it is no longer recognized by the Sony USB cable, and I do not have original LG USB cable.
Perhaps this is the reason why a computer will not recognize the phone
edzunic said:
I forgot to say, before the update, and my computer still recognize the phone, connecting it over sony usb cable, now it is no longer recognized by the Sony USB cable, and I do not have original LG USB cable.
Perhaps this is the reason why a computer will not recognize the phone
Click to expand...
Click to collapse
Your problem can be the non original cable or........reinstall the drivers and try again
Enviado desde mi LG-P970 usando Tapatalk 2
ferhpsquad said:
Your problem can be the non original cable or........reinstall the drivers and try again
Enviado desde mi LG-P970 usando Tapatalk 2
Click to expand...
Click to collapse
I have the original cable, but still the same problem.
I have all drivers installed, I can transfer files between the phone and the pc, I can use the LG suite,
But I can't see my phone on the ADB console, I can't use smartflashtool cause the phone isn't recoginized.
yesterday I tried with lg cable, and wall charger, in both cases, said slow charging the battery, I tried on three different computers, I tried to reinstall the drivers, like the software blocked communication with the phone, just charge the battery.
If there was a way to put the software through SD card, it might solve the problem.
even the software update mode, the computer does not see the phone
Bro! For the softwaretool like smartflash, You need to boot into download mode i.e., You need to switch off the phone, plug in the USB cable connected to the PC and instantly press the volume up button. Then the tool will recognise Your phone. Try it and check once!
I tried it, nothing happens,
I go to download mode, but computer does not recognize it again
behaves as if the port is destroyed
edzunic said:
I tried it, nothing happens,
I go to download mode, but computer does not recognize it again
behaves as if the port is destroyed
Click to expand...
Click to collapse
Try to boot your PC with disabled driver signatures, or use a 32bit windows system.
try entering download-mode the following way:
disconnect your phone from pc
remove battery
press and hold Vol-up
connect the usb-cable (still without battery)
Now the phone should be detected as a serial-cable device an you can use the smart flash tool.
would have to be sound,
no sound when I connect the phone to the PC
Solved my problem.
Seems like windows automatically installs driver to the phone, but it partially works.
Unistall all drivers for the phone, or try on a new computer.
Plug the phone and cancel the driver search by windows
Install drivers for LG (unplug the phone before)
Turn it off
Plug the cable and enter download mode
And there is the phone recognized on smartflashtool.
I'm flashing a new one right now, thank you.
You do not understand the problem
there's no sign, no sound when I connect the phone to a computer, any computer, drivers were or were not.
As if something in the phone blocked communication between the PC and phone
edzunic said:
You do not understand the problem
there's no sign, no sound when I connect the phone to a computer, any computer, drivers were or were not.
As if something in the phone blocked communication between the PC and phone
Click to expand...
Click to collapse
I got same problem.
bollix said:
I got same problem.
Click to expand...
Click to collapse
add me!
Connection Problem with Mackay 2.999
Hey Guys,
first of all, sorry for my not so good English
I'am at Mackay 2.999 with last Kernel of his build and can't connect the Phone to the Computer.
It only install the LGE Mobile Composite USB Device, the LGE Mobile USB Serial Port and the LGE Mobile USB Modem on connecting to the Workstation.
I had test it on many Computers but the Problem is all the same: I can't get on my Memory or ADB.
I also had testet all modes under the setting point (MTP/PTP/mass storage device) and with debbuging on and off.
On my Workstation is the Last Version of ADB (1.0.31) installed.
Did anyone know the problem?
Did no one know a result to this problem
Hmmm my PC also can't read my storage what I did is go to cwm and plugged in usb cable and pressed mount storage it seems to solve my problem. I also did a cache and dalvik cache wipe.
Hey, I have found the result to this problem. You must flash another Baseband. Use from Nooby the V30 Baseband and it is solved.
Gruß Ernst
via Tapatalk 2
but how to flash, when can´t connect to pc
lg optimus
hi frendz ,
please help me out
i'm using lg optimus p970..last night my phone memory get full and mobile get turn off ..now it wont turn on even battery is fully charged...only LG logo shows nithing else...
Hy guys , i have the same problem . I updated to 4.4.2 Nameless ROM and i can't connect my phone to pc . The only action that it's done : charging the phone and that's all . I tried connecting to another pc but with no result . An error appeared :" LGE USB Device - No driver found " .Before 4.4.2 i had 4.1.2 from CyanogenMod and with that ROM i had no problem connecting the phone to the pc . Any help ?
HI I know with the title of my thread its a nooby ques but my situation is different,
Since few days my phone was charging but not connecting to pc
as I know its a port issue because tried it on 3 pc's
Before I thought it's and rom issue I flash a different rom and got bootloop
Now I cant connect to pc no rom in sd
How do I flash it? I can go to twrp but I cant transfer from adb because port isnot working
I have a ques that really my por is damaged? Its only the isse?
because I cant get net port at my place and the shop man told me it could b an issue of motherboard too?
Can someone plz help me I am afraid and I cant afford motherboard for now..
:crying::crying::crying:
As I said I can chrge it so is their a way to temporary get rid of bootloop?
Thank You
Plzhelp
Are you using the original USB cable? There are some usb cable that will only provide power and no data connection. So make sure you have a data cable first. Then check you have the latest HTC drivers installed on your computer, make sure you don't have HTC Sync installed, that you are using a USB 2.0 port directly at the back of your PC (no external hub). What is your TWRP version, your Windows version and your Bootloader version?
Yes I know I have tried this all,
Have tried all recovery is twrp 2.8.7.0
Nd usb is original I use the same for my Xperia z2 for flashing...
Drivers are installed with signature enforcement disables on 8.1 windows
But all was working fine suddenly I got this issue..
What could be done
What is your hboot version
Can you get fastboot connectivity when in bootloader?
Can you get adb connectivity when in custom recovery or when booted in the ROM with USB debugging turned on?
Also worth mentioning that you won't get connectivity if your phone is on the lock screen, you must unlock the screen at least once when connected to the computer.
Otherwise if its the usb port, it can easily be replaced, you only need to remove the cover you then have access to the small usb/front mic board and can replace it without further dismantling. The usb board is pretty cheap, you can find it on amazon, ebay and probably any other website of that kind.
http://www.cafr.ebay.ca/itm/Chargin...682235?hash=item2c8fa787fb:g:URIAAOSwY45USvAs
https://www.youtube.com/watch?v=jaYzQHSGv54