Database Develop

P3600 - only serial connect in bootloader

I have a SFR s300+ locked to sfr on France...
So I need to change rom...
When windows mobile run - device can synhronize and activesync enable, but when I put device in bootloader by sspl or without them device only show as SERIAL connection not usb! I`ve tried to change cable, ports other OS on my laptops and other but I can`t connect to it in bootloader mode via usb...
where a problem hide ?
please, help.

1 connect the ppc to pc with usb cable
2 put it in bootloader mode while connected
worked for me this way.

bootloader problem
i've the same problem , i've tried everything without success. In order:
- change usb cable
-change usb port on my laptop
- change personal computer, reinstalling active sync
- change settings in "settings-connections-usb to pc"
- hard reset
Syncro works well, my phone works well but i'm not able to upgrade the LASAGNA ROM 'cause when i enter in bootloader mode, it stay only in SERIAL MODE. There's a workaround to install the rom from the SD card instead of the USB cable?

Is a cable' problem.
Change the usb.
I had te same problem, after works 100%.

I've tried with another USB cable but it didn't work. with the other cable i'm able to do everything like the original HTC cable i'm actually use. Do you think i should buy another usb cable? What are the specifications of the htc cable?

ilmetallo said:
I've tried with another USB cable but it didn't work. with the other cable i'm able to do everything like the original HTC cable i'm actually use. Do you think i should buy another usb cable? What are the specifications of the htc cable?
Click to expand...
Click to collapse
I tryed with another cable, don't work. I definitely exclude a cable problem. I think there's something wrong with the miniusb connection in the device. I would try to upgrade the ROM directly from sd card but the procedure in wiki don't work.

got it fixed
your overloading the usb port most likely old computer/laptop or power issues, i have the xv6700 so i can use the cradle for power from a wall socket then plug the other cable into the usb port. works like a charm

p3600 - only serial connect in bootloader
it has to be your pc drivers if your pc/laptop is vista there is a site with driver swap for xp drivers for vista pc/laptops. had the same issue and voila mines sorted.laso check comm manager on your device as well jus to make sure as i write jus completed rom upgrade to wm6.1 from spv m700

boots up to "TOUCH DIAMOND" screen and remains blank!!!

I flashed a new rom from the internal storage and apparently there's something wrong with it because the phone just hangs after the initial screen with the radio version and rom version!! Is there a way where I can get into the internal storage to put in a new rom? As far as I'm concern, bootloader still works (the rainbow screen) but I don't know what ot do after that...I've done many hard-resets but to no avail.
Please help!

if your bootloader works, yo can use your USB cable and computer to flash a new rom !

Hold volume down and hit the reset button. It will put you in the tricolor bootloader screen. In the white it says serial. Connect it to your usb cord. It should now say usb. Now flash the STOCK rom. Then try flashing the ROM you want.

stupid me, i formatted teh NAND before I posted this thread! Now when i plug in the USB cord, it still says "Serial" and my computer is not able to connect to it. Is there any other way???

See what happens if you now take out the SIM Card and do another hard reset.

It still says "serial"!! Are these my only options? Are there no other way?

That sounds bad. YOur Dimond is not picking up the connection to the PC via the USB cable. Can you try using a different cable also check the pins on the female USB are not bent as i've seen that happen to someone else on this forum.
EDIT: If you have one, try using another USB cable.

I try on another computer and miraculously it picked up the USB drive!! I then ran the RUU and got a working rom in there
Thank you for your help!

Micro Usb Port Problem

I Don't know how it's possible but i have a strange problem... i used to listen my music from an OTG device inserting an adapter in the htc one recharging port... so, from yesterday, without happening anything the port is working only for charge... if i insert my device into pc it doesn't recognize as debug usb device and it's only charging... is the port broken? what can i do to solve this problem? i flashed a new rom but nothing... and also if i try to open a fastboot command or just a adb the device isn't recognized...
please help me, i'm totally desperate... i hope i don't have to send to assistance...
thanks

If you installed a new rom, you need to enable uab debugging again, Also you can pull the notification down and check tonsee if the setting isbon charge only
Sent from my HTC One using Tapatalk 4 now Free

Need Help Having Serious Issue Htc one charging but not connecting to PC

HI I know with the title of my thread its a nooby ques but my situation is different,
Since few days my phone was charging but not connecting to pc
as I know its a port issue because tried it on 3 pc's
Before I thought it's and rom issue I flash a different rom and got bootloop
Now I cant connect to pc no rom in sd
How do I flash it? I can go to twrp but I cant transfer from adb because port isnot working
I have a ques that really my por is damaged? Its only the isse?
because I cant get net port at my place and the shop man told me it could b an issue of motherboard too?
Can someone plz help me I am afraid and I cant afford motherboard for now..
:crying::crying::crying:
As I said I can chrge it so is their a way to temporary get rid of bootloop?
Thank You
Plzhelp

Are you using the original USB cable? There are some usb cable that will only provide power and no data connection. So make sure you have a data cable first. Then check you have the latest HTC drivers installed on your computer, make sure you don't have HTC Sync installed, that you are using a USB 2.0 port directly at the back of your PC (no external hub). What is your TWRP version, your Windows version and your Bootloader version?

Yes I know I have tried this all,
Have tried all recovery is twrp 2.8.7.0
Nd usb is original I use the same for my Xperia z2 for flashing...
Drivers are installed with signature enforcement disables on 8.1 windows
But all was working fine suddenly I got this issue..
What could be done

What is your hboot version
Can you get fastboot connectivity when in bootloader?
Can you get adb connectivity when in custom recovery or when booted in the ROM with USB debugging turned on?
Also worth mentioning that you won't get connectivity if your phone is on the lock screen, you must unlock the screen at least once when connected to the computer.
Otherwise if its the usb port, it can easily be replaced, you only need to remove the cover you then have access to the small usb/front mic board and can replace it without further dismantling. The usb board is pretty cheap, you can find it on amazon, ebay and probably any other website of that kind.
http://www.cafr.ebay.ca/itm/Chargin...682235?hash=item2c8fa787fb:g:URIAAOSwY45USvAs
https://www.youtube.com/watch?v=jaYzQHSGv54

Broken USB port, can't upload system via ODIN

Hello everyone!
My SGSA has broken USB port, but it wasn't such a problem. I had uploaded TWRP and all the time I wanted to change the software it was just few clicks. This time I tried to install some other ROM (I was looking for perfect performance, so I tested about 25+ ROMs within a month. This instalation has formated /system partition and as I think many others, beacuse I can't even boot into recovery, phone stays at "Samsung Galaxy S Advance I9070" logo. I am able to boot into "Download Mode" but beacuse of broken USB port PC detects it as a malfunctioned device. I wanna add that I tried maaaany PC's and many USB cables to connect.
Hope for help, cheers
bnkv

bnkv said:
Hello everyone!
My SGSA has broken USB port, but it wasn't such a problem. I had uploaded TWRP and all the time I wanted to change the software it was just few clicks. This time I tried to install some other ROM (I was looking for perfect performance, so I tested about 25+ ROMs within a month. This instalation has formated /system partition and as I think many others, beacuse I can't even boot into recovery, phone stays at "Samsung Galaxy S Advance I9070" logo. I am able to boot into "Download Mode" but beacuse of broken USB port PC detects it as a malfunctioned device. I wanna add that I tried maaaany PC's and many USB cables to connect.
Hope for help, cheers
bnkv
Click to expand...
Click to collapse
Get that USB port replaced .. it doesn`t cost much . in india it costs only 200-rupees . Because if everything fails ODIN is your saviour and he can`t rescue you without a USB to PC connection .

I also have the same problem. After trying different ROMs, today I try to use Odin found The USB port is not recognized,
Is a Rom damaged a file or even damaged the Usb port? Can repair?
edit_2017-0205
I am very sorry for the reckless speculation.
2015-0903 I used Kies to upgrade my Chinese Simplified version of i9070 to ver4.12. Since the Simplified version of stock rom has something like Baidu and other useless apk
So I used TitaniumBackup to remove a lot of apk, more than a year have not used a USB cable link, just use the SD card to transfer files, this may be the reason, of course, may be physical damage to the USB port. Roms cause USB not to recognize just guess.
Now my phone recovery mode is still working, USB port can only charge..
I'm not good at English,,

TianNian said:
I also have the same problem. After trying different ROMs, today I try to use Odin found The USB port is not recognized,
Is a Rom damaged a file or even damaged the Usb port? Can repair?
edit_2017-0205
I am very sorry for the reckless speculation.
2015-0903 I used Kies to upgrade my Chinese Simplified version of i9070 to ver4.12. Since the Simplified version of stock rom has something like Baidu and other useless apk
So I used TitaniumBackup to remove a lot of apk, more than a year have not used a USB cable link, just use the SD card to transfer files, this may be the reason, of course, may be physical damage to the USB port. Roms cause USB not to recognize just guess.
Now my phone recovery mode is still working, USB port can only charge..
I'm not good at English,,
Click to expand...
Click to collapse
If your phone does charge, then it means that the phone USB port is not broken.
Make sure that you have Samsung USB drivers installed. You can also try other PC USB.

#Henkate said:
If your phone does charge, then it means that the phone USB port is not broken.
Make sure that you have Samsung USB drivers installed. You can also try other PC USB.
Click to expand...
Click to collapse
Thank you.
PC usb port and usb data cable is working, they can adb debug mode to link another phone. I tried the SAMSUNG USB Driver for Mobile Phones-1.5.51.0.exe and samsung KiesSetup-2.5.3 (andkies 2.63) on that day without success.
Now mobile phone recovery mod brush into the Rom, the phone can use.