Hi all
I have samsung galaxy s i9000
Firmware version 2.3.6
baseband version i9000xxjvt
kernel version 2.6.35.7-I9000xwjvz-cl762604
[email protected]#2
build number :gingerbread.xwjvz
I want to root my phone,i dont know which file i have to download.
please tell me how.
Download the semaphore 2.7.4.Tar file and use odin to flash the kernel
semaphore.gr
Küldve az én GT-I9000-ről Tapatalk használatával
mohsen_pgr said:
Hi all
I have samsung galaxy s i9000
Firmware version 2.3.6
baseband version i9000xxjvt
kernel version 2.6.35.7-I9000xwjvz-cl762604
[email protected]#2
build number :gingerbread.xwjvz
I want to root my phone,i dont know which file i have to download.
please tell me how.
Click to expand...
Click to collapse
You need JW4 CF-Root Kernel , flashing via ODIN.
kevinrus123 said:
You need JW4 CF-Root Kernel , flashing via ODIN.
Click to expand...
Click to collapse
thank you can you put the download link?
Odin you can get from here:
http://forum.xda-developers.com/showthread.php?t=2189539
For i9000 you should take ODIN v1.83:
mohsen_pgr said:
thank you can you put the download link?
Click to expand...
Click to collapse
mohsen_pgr said:
thank you can you put the download link?
Click to expand...
Click to collapse
Just enter "Odin 1.82" into the search field (upper part of the page on the right). One of the first links is direct download link.
Semaphore 2.7.4 kernel is all you need (that version is made for your firmware), the advice is good. It is a root kernel and consists all you need, SU, busybox even CWM based Semaphore recovery.
Find good flashing guide, here are plenty to find.
Related
Is JVO the lastest GB firmware available? and where can i download it?
Do i install the same way i installed froyo with odin in my GT-i9000, atm running:
Firmware version
2.2.1
Baseband version
i9000UGJL2
Kernevel version
2.6.32.9
[email protected]#1
Build Number
FROYO.XXJPY
http://forum.xda-developers.com/showthread.php?t=948790
or get it from Samfirmware
thxs!
DaRkMyk said:
http://forum.xda-developers.com/showthread.php?t=948790
or get it from Samfirmware
Click to expand...
Click to collapse
thanks for the answer im downloading JVO
This post is deleted
This is Good. Thanks
Thank u very much
prateek.maac said:
GUYS ITS FINALLY HERE GINGERBREAD FOR OUR INDIAN GALAXY POP
OFFICIAL FIRMWARE
DOWNLOAD IT TO YOUR HEARTS WILL
AND ITS 2.3.6
Firmware Link :http://www.megaupload.com/?d=01697TCI
Odin Link :http://www.megaupload.com/?d=OF1GXWA4
Tass.ops Link :http://www.megaupload.com/?d=F51WOGKH
Click to expand...
Click to collapse
Here are step by step guide if you are not sure how to upgrade your rom or flash this new GB 2.3.6 update on your device.
Flashing 2.3.6 : http://yagyagaire.blogspot.com/2011/12/how-to-upgrade-samsung-galaxy-pop-to.html
Rooting 2.3.6 : http://yagyagaire.blogspot.com/2011/12/rooting-samsung-galaxy-pop-with.html
All the best. Have a happy upgrade!
Hi!
Today I have bought the Samsung Galaxy Mini ( GT-S5570)
It's have been flashed with "CyanogenMOD 7.2.0"
I want to go back to stock,but i cant find my firmware.
This is the information from the "about" section in settings :
*Model number: GT-S5570
*Android version: 2.3.7
*Baseband Version: S5570XWKS2
*Mod version: CyanogenMOD-7.1.0-GalaxyMini-KANG
*Build number: GWK74
I cant find my stock ROM.
I have tried in here: http://samfirmware.com/
And i cant find the firmware that match to my phone.
And i have found this post:
http://droidangel.blogspot.com/2011/05/samsung-galaxy-mini-s5570-original.html
No sign to my ROM too.
someone can tell me what to download?
thanks .
You need XWKS2, should be availabe at sammobile.
I know,but i cant find it...
Its just not there.
Question : Why you need XWKS2 specifically ? I guess any SGM ROMS found in sammobile could be flashed through Odin. Its as simple as that.
Anyways here's your firmware (XWKS2) :
http://hotfile.com/dl/133147681/5a0eed0/S5570XWKS2.rar.html
Ripped from: http://sampro.pl/firmware/android/samsung-s5570/
Click to expand...
Click to collapse
coolsandie said:
Question : Why you need XWKS2 specifically ? I guess any SGM ROMS found in sammobile could be flashed through Odin. Its as simple as that.
Anyways here's your firmware (XWKS2) :
http://hotfile.com/dl/133147681/5a0eed0/S5570XWKS2.rar.html
Click to expand...
Click to collapse
thanks.
I have found anothe one.
WAIT!!!
I can flash any ROM?(I mean to Stock ROM)?
In the guide that i have seen in the [INDEX][FAQ] , wrote that i have to choose only my region.
efid845 said:
WAIT!!!
I can flash any ROM?(I mean to Stock ROM)?
In the guide that i have seen in the [INDEX][FAQ] , wrote that i have to choose only my region.
Click to expand...
Click to collapse
I'm not sure about 3G or Maps and Navigation and all, because I've not used it. But all other things such as Wifi/2G etc. works perfectly. I myself was using European GB stock firmware for long time.
Hi Guys,
Since I am new, I cannot post on the development groups. I was installing a ROM on my friend's S Advance. Whenever I flash a ROM, I am able to install everything properly but I have lost my mobile signal completely . I cannot make calls or send messages, the SIM works fine on other phones. What could be the problem here?
In Phone Status, it shows :
Network : Unknown
Signal strength : 0 dBm 99asu
Mobile Network Type : Unknown:0
Service Status : Radio Off
I have an Indian version of the phone, Baseband : i9070DDLK2
I tried looking for Radio files to Flash, but cannot seem to find it anywhere on XDA,
Please please help me out. Thank You so much for reading. Please let me know how to make it work.
What ROM did you flash?
szzlgupta said:
What ROM did you flash?
Click to expand...
Click to collapse
Flashed this ROM :
http://forum.xda-developers.com/showthread.php?t=2324100
I tried flashing a few other ROMs too. Same issue with them.
NOOOOO
These roms can be flashed ONLY over JB 4.1.2 firmware! You have GB.
Please first upgrade to JB and then flash this rom!
szzlgupta said:
NOOOOO
These roms can be flashed ONLY over JB 4.1.2 firmware! You have GB.
Please first upgrade to JB and then flash this rom!
Click to expand...
Click to collapse
Whoah! Okay
I tried flashing a stock firmware over ODIN from a link with stock firmware files. Phone went into a bootloop. Could you please forward me to a link with the firmware I should flash? Thanks
Did you make a factory clean? It will boot up!
szzlgupta said:
Did you make a factory clean? It will boot up!
Click to expand...
Click to collapse
Yes. Factory reset in recovery then rebooted in download mode and flashed via Odin
What FW did you flash? 2.3.6 or 4.1.2 ?
szzlgupta said:
What FW did you flash? 2.3.6 or 4.1.2 ?
Click to expand...
Click to collapse
I tried flashing this :
I9070DDULP8_ODDULP8_India_Android_4.1.2 Since the following were the only 2 available for India on the XDA links and the others I found, I thought I'd give it a try :
REGION: INU (India) | PDA: I9070DDLJ1 | CSC: I9070DDLJ1
DOWNLOAD
REGION: INU (India) | PDA: I9070DDLI1 | CSC: I9070DDLD4
DOWNLOAD
Click to expand...
Click to collapse
Then I figured out it won't work for i9070DDLK2 so I'm trying to reflash to stock 2.3.6
If you know where I could find a 4.1.2 link for i9070DDLK2, do let me know. I'd be grateful
No.. ddlk2 is 2.3.6 and ddulp8 is 4.1.2
First u need to flash ddlk2 which is 2.3.6 and then flash ddulp8 which is 4.1.2!
szzlgupta said:
No.. ddlk2 is 2.3.6 and ddulp8 is 4.1.2
First u need to flash ddlk2 which is 2.3.6 and then flash ddulp8 which is 4.1.2!
Click to expand...
Click to collapse
Okay. Thanks for clarifying. All these baseband versions on Samsung have me thoroughly confused.
I am pretty new to Samsung devices when it comes to rooting. Really appreciate you clarifying it.
Actually I had jumped from Firmware 2.3.6 to a custom ROM on 4.2.2 and then tried jumping back to Firmware 4.1.2 and hence the bootloop was occurring. (It's kind of making some sense now )
Thank you so much for clarifying, didn't read it clearly on blogs I guess, my bad. Firmware 2.3.6 is on download. I'll do a clean install of the firmware on ODIN and then try 4.1.2 and then custom ROMs. Thanks
Yes. And don't need to say 'Thanks', just HIT it!
Hey Guys,
I am new to rooting so please take that into account.
Basically what I am trying to do is to root my Samsung Galaxy Note in order to remove the limit of the amount of text messages that can be sent per hour.
I am following this tutorial on how to root it: http://forum.xda-developers.com/showthread.php?t=2217840
Method 1, where you easily just download an app that roots it, does not work for me - this error comes up: FAILURE: Could not root device
Method 2, which is where you download the kernel based on your ROM is what I am now trying to do.
However the link it provides to download the roms from: http://forum.xda-developers.com/showthread.php?t=1901191
Does not appear to have my ROM/Kernel. Please help me out.
This is some information about my device:
Model Number: GT-N7000
Android Version: 4.1.2
Baseband version: N7000XXLT3
Kernel Version: 3.0.31-1103517
Build Number: JZO54K.N7000XXLT9
Not really sure how to do this. Please advise. Nothing for XXLT3 or XXLT9.
Thanks in advance,
Sparkz Web
sparkzweb said:
Hey Guys,
I am new to rooting so please take that into account.
Basically what I am trying to do is to root my Samsung Galaxy Note in order to remove the limit of the amount of text messages that can be sent per hour.
I am following this tutorial on how to root it: http://forum.xda-developers.com/showthread.php?t=2217840
Method 1, where you easily just download an app that roots it, does not work for me - this error comes up: FAILURE: Could not root device
Method 2, which is where you download the kernel based on your ROM is what I am now trying to do.
However the link it provides to download the roms from: http://forum.xda-developers.com/showthread.php?t=1901191
Does not appear to have my ROM/Kernel. Please help me out.
This is some information about my device:
Model Number: GT-N7000
Android Version: 4.1.2
Baseband version: N7000XXLT3
Kernel Version: 3.0.31-1103517
Build Number: JZO54K.N7000XXLT9
Not really sure how to do this. Please advise. Nothing for XXLT3 or XXLT9.
Thanks in advance,
Sparkz Web
Click to expand...
Click to collapse
Google for philz kernel and download the one matching with your baseband, if not under one link try to find other link under philz kernel as there has been so many updates for the kernel.
Sent from my GT-N7000 using Tapatalk
treacherous_hawk said:
Google for philz kernel and download the one matching with your baseband, if not under one link try to find other link under philz kernel as there has been so many updates for the kernel.
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
ok thanks.
and then I'll be able to just follow the rest of that tutorial?
Yes the same steps.
kaborayyan said:
Yes the same steps.
Here is a link for the xxlt6 kernel
Sent from my smartphone using xda app-developers app
Click to expand...
Click to collapse
It is not XXLT6
It is baseband XXLT3
and build number XXLT9
sparkzweb said:
It is not XXLT6
It is baseband XXLT3
and build number XXLT9
Click to expand...
Click to collapse
yes I noticed it ... I tried to delete the post but it was too late ... sorry
You need to match the build number not the baseband.
same problem
I have the same problem, did you manage to root your device?
Hey Guys,
I am new to rooting so please take that into account.
Basically what I am trying to do is to root my Samsung Galaxy Note in order to remove the limit of the amount of text messages that can be sent per hour.
I am following this tutorial on how to root it: http://forum.xda-developers.com/showthread.php?t=2217840
Method 1, where you easily just download an app that roots it, does not work for me - this error comes up: FAILURE: Could not root device
Method 2, which is where you download the kernel based on your ROM is what I am now trying to do.
However the link it provides to download the roms from: http://forum.xda-developers.com/showthread.php?t=1901191
Does not appear to have my ROM/Kernel. Please help me out.
This is some information about my device:
Model Number: GT-N7000
Android Version: 4.1.2
Baseband version: N7000XXLT3
Kernel Version: 3.0.31-1103517
Build Number: JZO54K.N7000XXLT9
Not really sure how to do this. Please advise. Nothing for XXLT3 or XXLT9.
Thanks in advance,
Sparkz Web[/QUOTE]
HD2wally said:
I have the same problem, did you manage to root your device?
Click to expand...
Click to collapse
What problem? Flash philz kernel .zip version from stock recovery, use the one matching your build number which is XXLT9.