This is question for developers and porters.Why no one is porting new builds of liquidsmooth rom since it is for me best rom for our phone.I am still flashing old demetris build...
dimi89 said:
This is question for developers and porters.Why no one is porting new builds of liquidsmooth rom since it is for me best rom for our phone.I am still flashing old demetris build...
Click to expand...
Click to collapse
Sorry to ask for this, I know I should install and test for myself the rom,
But I just would like to know how is the battery life on this rom?
What about the power button? Does it work properly? Because I had this issue on android 4.3 based rom's.
And the camera? Clear images and sharper?
Thanks in advance!
Best Regards from Brazil
By the way, in my opinion android 4.2.2 is the most stable atm
Rafael Cardoso said:
Sorry to ask for this, I know I should install and test for myself the rom,
But I just would like to know how is the battery life on this rom?
What about the power button? Does it work properly? Because I had this issue on android 4.3 based rom's.
And the camera? Clear images and sharper?
Thanks in advance!
Best Regards from Brazil
By the way, in my opinion android 4.2.2 is the most stable atm
Click to expand...
Click to collapse
Build that we currently have ported by Demetris is 4.2.2 and for me it is the best custom rom out there.Camera and battery are great even with stock app and stock kernel.Alwayse switching between MIUI and LiquidSmooth.Flash it and test is for couple of days yourself and see if you are satisfied.
Greetings from Serbia
what bugs does it have?
Sent from my AOSP 4.3 Xperia S via Tapatalk
Ben36 said:
what bugs does it have?
Sent from my AOSP 4.3 Xperia S via Tapatalk
Click to expand...
Click to collapse
Test it or read the last few posts of the rom thread.
Not that hard, is it?
Sent from my 4X HD via XDA Premium
it's also not hard for the devs to just put them in the OP but they all seem scared to admit there are bugs on this forum
Sent from my AOSP 4.3 Xperia S via Tapatalk
dimi89 said:
Build that we currently have ported by Demetris is 4.2.2 and for me it is the best custom rom out there.Camera and battery are great even with stock app and stock kernel.Alwayse switching between MIUI and LiquidSmooth.Flash it and test is for couple of days yourself and see if you are satisfied.
Greetings from Serbia
Click to expand...
Click to collapse
@dimi89 Dimi! Thank you again! You have already answered me on another post, and again here, with the same education and niceness
Thanks, I flashed LiquidSmooth rom and until this moment, no problems at all.. everything ok with iodak kernel v8 10.1..
Greetings from Brazil
Ben36 said:
it's also not hard for the devs to just put them in the OP but they all seem scared to admit there are bugs on this forum
Sent from my AOSP 4.3 Xperia S via Tapatalk
Click to expand...
Click to collapse
It's even easier for YOU to test it yourself. Backup your current setup and flash it. Most of the mentioned bugs aren't even for everybody and it is actually quite hard for the devs to make a full list of bugs which occur for every single user.
If you don't agree with that it's your fault. The devs are doing an awesome job here and they do it because they want to.
Sent from my 4X HD via XDA Premium
In my honest opinion, bugs should be on the OP if they are known bugs. It's a matter of structure and information. But that's just me
From what I understood, carbon is a "fork" from Liquid and I think it's a compilation from source and not a port, right? If so, is it possible to compile Liquid from source as well ?
This question is for someone who knows or a developer
MidnightDevil said:
In my honest opinion, bugs should be on the OP if they are known bugs. It's a matter of structure and information. But that's just me
From what I understood, carbon is a "fork" from Liquid and I think it's a compilation from source and not a port, right? If so, is it possible to compile Liquid from source as well ?
This question is for someone who knows or a developer
Click to expand...
Click to collapse
They stated that Carbon rom doesnt have anything to do with liquid team.Also if you look at title on older liquid builds by demetris you will see it says "Official" so i think it is possible to compile from source.Asked demetris long time ago about liquid future for our phone but still no answer.
dimi89 said:
They stated that Carbon rom doesnt have anything to do with liquid team.Also if you look at title on older liquid builds by demetris you will see it says "Official" so i think it is possible to compile from source.Asked demetris long time ago about liquid future for our phone but still no answer.
Click to expand...
Click to collapse
No, they stated the following:
CarbonRom is an aftermarket firmware based on the Android Open Source Project. The team is composed of former members of Team Liquid who have forked the code in an attempt to bring greater speed, better coding, and full authorship to code. We are in no way affiliated with Liquid0624. The rom was forked at Liquid beta 3.2.1 and has since undergone major code changes and modifications.
Click to expand...
Click to collapse
They "forked" the code, although it was changed a LOT, a fork is a fork
Anyway, I'm gonna have a look later on see if Liquid can be compiled for our p880.
Thanks dimi :good:
MidnightDevil said:
No, they stated the following:
They "forked" the code, although it was changed a LOT, a fork is a fork
Anyway, I'm gonna have a look later on see if Liquid can be compiled for our p880.
Thanks dimi :good:
Click to expand...
Click to collapse
No,THANK you man Someone sayed that all 4.2 builds are much better then 4.3 roms builds and i agree on that.
Far as I understood the source is published.
Will see what I can do during the weekend
https://github.com/LiquidSmooth/android
And yeah, I agree, I'm pretty happy with CM10. 1.3. Although I do miss the privacy features from 4.3.
Mods can lock and delete this since demerits answered our prayers and ported new version.
Sent from my microwave.
Related
The Jelly Bean ROM's are great, but for me there's just too many bugs.
We have the ICS source now and I'd love a stable CM9 build. Unfortunately it looks like attn1 may have moved on, and all the other devs seem to be just working on JB.
Dude your not alone...count me in for that...if i knw step by step guide to at least to compile an AOSP kernel I would do it now
i ll waiting too but however stable cm9 or cm 10 doesnt exisit by now
Be patient
No I'm waiting for CM9 o CM10 too for a valid porting of MIUI
Everyone is waiting for CM9 but we need a kernel to get everything working propably! Our devs are working on it but they have a life, too. Don't expect sb to do a one-man Jesus show here;D Be patient, we will get fully working CM9 when kernel boots up
And in the future you can post stuff like this in our famous OFF-Topic-thread Keeps the G-Sec clean
Raithmir said:
The Jelly Bean ROM's are great, but for me there's just too many bugs.
We have the ICS source now and I'd love a stable CM9 build. Unfortunately it looks like attn1 may have moved on, and all the other devs seem to be just working on JB.
Click to expand...
Click to collapse
It doesn't really matter much which ROM to make - ICS based or JB based CM. Because to make a proper and stable ROM, all you need is to make a stable AOSP\AOKP compatible kernel (and we still don't have one).
PS: AFAIK CM team wont add CM9 support for any more devices, i.e. if they will make a CM for our IncS it will be JB based CM10 and not CM9.
I thought that once we had sources, the kernel would be pretty easy, but then I don't know much about it. Who is working on the kernel?
I also thought that CM would only support a phone if source was available. Since we only have ICS source right now, that would rule out CM10 wouldn't it?
Sent from my Incredible S using Tapatalk 2
Raithmir said:
I thought that once we had sources, the kernel would be pretty easy, but then I don't know much about it. Who is working on the kernel?
I also thought that CM would only support a phone if source was available. Since we only have ICS source right now, that would rule out CM10 wouldn't it?
Sent from my Incredible S using Tapatalk 2
Click to expand...
Click to collapse
Many of the CM10 ROMs don't have manufacturer source for JB (only ICS) therefore it is safe to assume that our ICS kernel can be used with CM10.
If we want official support we need a maintainer
The maintainer for the 7x30 HTC devices like ours, dhd, desire s etc
Our maintainer, Kali- moved on to Sony devices iirc
If we ask nexx and nk111 (cm devs from desire s) nicely maybe they might build for us
Sent from my HTC Incredible S
I understand that attn1 is still our maintainer.
weaselEST said:
I understand that attn1 is still our maintainer.
Click to expand...
Click to collapse
Orly? Anyone heard from him/her?
Sent from my HTC Incredible S
I sent him a tweet some time ago after he bought S3 and I wrote something like this: "So you're not the maintainer for IncS anymore". And he replied "What makes you think that" . He still owns a vivo and a vivos.
Sent from my Incredible S using xda premium
weaselEST said:
I sent him a tweet some time ago after he bought S3 and I wrote something like this: "So you're not the maintainer for IncS anymore". And he replied "What makes you think that" . He still owns a vivo and a vivos.
Sent from my Incredible S using xda premium
Click to expand...
Click to collapse
That's good, hopefully he can compile CM10 soon and bring official support for CM9/10
I would be very grateful of that
I really want CM9 without any bug. Even now im usin CM7! i didt find any ICS AOSP rom. So im thinking about change my phone
Plz coock it...
Sent from my Incredible S using Tapatalk 2
Hello everyone!
You might have read about OmniROM in XDA news. More info about the project: http://omnirom.org/ and http://forum.xda-developers.com/forumdisplay.php?f=2601.
I have compiled the first ever unofficial build of the rom from unpublished Gerrit sources and guess what, for the p880.
Screenshots: http://forum.xda-developers.com/showthread.php?t=2481797. This thread will be the discussion and Q&A thread for OmniROM. It will be officially supported and maintained by me.
Your a legend Adam, im very optimistic about this project and we must one of the first to get it! hows it run so far?
All standard features that I use works, except BT which is not that hard to fix. Some patches are needed and it'll work. Performance is crappy, because there is a bug in the kernel that makes only one core to be enabled. Will be pushing fixes and improvements here and there as it gets running. I'm really excited to work on this, this is sth I've been waiting for a long time.
Adam77Root said:
Hello everyone!
You might have read about OmniROM in XDA news. More info about the project: http://omnirom.org/ and http://forum.xda-developers.com/forumdisplay.php?f=2601.
I have compiled the first ever unofficial build of the rom from unpublished Gerrit sources and guess what, for the p880.
Screenshots: http://forum.xda-developers.com/showthread.php?t=2481797. This thread will be the discussion and Q&A thread for OmniROM. It will be officially supported and maintained by me.
Click to expand...
Click to collapse
cant wait to see how it goes. good luck!
Its going to be exciting
Adam77Root said:
Hello everyone!
You might have read about OmniROM in XDA news. More info about the project: http://omnirom.org/ and http://forum.xda-developers.com/forumdisplay.php?f=2601.
I have compiled the first ever unofficial build of the rom from unpublished Gerrit sources and guess what, for the p880.
Screenshots: http://forum.xda-developers.com/showthread.php?t=2481797. This thread will be the discussion and Q&A thread for OmniROM. It will be officially supported and maintained by me.
Click to expand...
Click to collapse
I really appreciate your work and effort keep up the good work. Its great to have you among us for development of our device.
Sent from my LG-P880 using XDA Premium 4 mobile app
Adam77Root said:
I found the needed patch for BT today, will be there in the next version.
Click to expand...
Click to collapse
You do not have to hurry. I'll be waiting. This is not a problem. Make your work and live your private life. Thank you. Hálás köszönet.
Best regards
hello Adam,
this rom indeed shows promise.
i would like to compile this from source, can you upload your sources?
thanks.
I don't know what's going on, how can this already be smoother then the latest cm10.2 nightlies? I'm very impressed so far. I was just flashing to test but I think she's a keeper.
Only thing I've found is a little bit of lag on the default launcher.
gandhar said:
hello Adam,
this rom indeed shows promise.
i would like to compile this from source, can you upload your sources?
thanks.
Click to expand...
Click to collapse
It will be available later at OmniROM official GitHub page.
JoinTheRealms said:
I don't know what's going on, how can this already be smoother then the latest cm10.2 nightlies? I'm very impressed so far. I was just flashing to test but I think she's a keeper.
Only thing I've found is a little bit of lag on the default launcher.
Click to expand...
Click to collapse
If you flash iodak v08 (or probably any other custom kernel), the lag is gone.
Tbks ROM is oficial for the p880? Or is unofficial
And is multilanguaje?
tiflao said:
Tbks ROM is oficial for the p880? Or is unofficial
And is multilanguaje?
Click to expand...
Click to collapse
It's semi-official. Built from unpublished code.
Multilanguage, translations will be improved with time.
Sent from my OmniROM-powered LG Optimus 4X HD
No supersu in this ROM ?
I had to install this
Sent from my Optimus 4X HD using xda app-developers app
@adam77 when the Rom will official release for our phone can you please then delete useless part like:
On Pac Man Rom we have Paranoid,Aokp and CyanogenMod in one Rom and in Aokp Settings under LED the Led Test don't work because these features is for phones with colorable led.
And so features are unless when Omni Rom will maybe have some of this useless features can you please remove?
Sent from my LG-P880 using xda premium
musklor said:
No supersu in this ROM ?
I had to install this
Sent from my Optimus 4X HD using xda app-developers app
Click to expand...
Click to collapse
No. It will be included later.
Nemeziz 56th said:
@adam77 when the Rom will official release for our phone can you please then delete useless part like:
On Pac Man Rom we have Paranoid,Aokp and CyanogenMod in one Rom and in Aokp Settings under LED the Led Test don't work because these features is for phones with colorable led.
And so features are unless when Omni Rom will maybe have some of this useless features can you please remove?
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
I won't have to delete them, they will be hidden by default on devices which don't support those features. This is a very early build, the code wasn't even published yet when I compiled it.
BTW new build coming tomorrow. Fixed BT, BT tethering and Torch. Also, the device tree is now ready to be forked into official repos. Will update my GitHub tomorrow.
Very good job!
Thank you.
Sent from my Optimus 4X HD using xda app-developers app
@Adam77Root how is camera in this rom? Other roms based in CM the camera is not so perfect when compared with stock.
What about this?
Thanks
gengi said:
@Adam77Root how is camera in this rom? Other roms based in CM the camera is not so perfect when compared with stock.
What about this?
Thanks
Click to expand...
Click to collapse
Its the same as cyanogenmod
TWRP support?
can i flash with TWRP?
gandhar said:
can i flash with TWRP?
Click to expand...
Click to collapse
yes.
When we will have available an android 4.4 rom ? Is someone working on this ?
SilentGTX said:
When we will have available an android 4.4 rom ? Is someone working on this ?
Click to expand...
Click to collapse
Hey, well we can get some pre-alpha 4.4 AOSP builds maybe, but these will definitely have bugs, i do believe adam has built a 4.4. omni rom but i don't know much about bugs/boot status etc.
We are still waiting for cyanogenmod to merge sources, however they have stated that they are in no rush to start dishing out 4.4 roms as they have only just sunken their teeth into 4.3 Roms, we will get them eventually, however any builds within the next few days will have little customization or lots of bugs, patience is all we have till then
I hope this answered your question, also, this needs to be in the Q&A section next time bro
Good evening.
penguin449 said:
Hey, well we can get some pre-alpha 4.4 AOSP builds maybe, but these will definitely have bugs, i do believe adam has built a 4.4. omni rom but i don't know much about bugs/boot status etc.
We are still waiting for cyanogenmod to merge sources, however they have stated that they are in no rush to start dishing out 4.4 roms as they have only just sunken their teeth into 4.3 Roms, we will get them eventually, however any builds within the next few days will have little customization or lots of bugs, patience is all we have till then
I hope this answered your question, also, this needs to be in the Q&A section next time bro
Good evening.
Click to expand...
Click to collapse
Yeah thank you very much , it was very helpful , sorry for the wrong section . I can't wait for Android 4.4 ROMs :fingers-crossed: Good evening .
SilentGTX said:
Yeah thank you very much , it was very helpful , sorry for the wrong section . I can't wait for Android 4.4 ROMs :fingers-crossed: Good evening .
Click to expand...
Click to collapse
Please understand that all the great things you've been hearing about android 4.4 wont apply to us for quite some time, what i mean by this is all the efficiency/ performance improvements will be somewhat mitigated buy bugs and firmware incompatibilities, these things take time for devs to work through, 4.3 still isnt mature enough on this device to call it stable.
I just don't want people to get overly excited by a 4.4 port, its improvements will come gradually.
JoinTheRealms said:
Please understand that all the great things you've been hearing about android 4.4 wont apply to us for quite some time, what i mean by this is all the efficiency/ performance improvements will be somewhat mitigated buy bugs and firmware incompatibilities, these things take time for devs to work through, 4.3 still isnt mature enough on this device to call it stable.
I just don't want people to get overly excited by a 4.4 port, its improvements will come gradually.
Click to expand...
Click to collapse
I understand , of course , but still I can't wait :victory:
Gonna join this group, too
4.4 sure is on its way for our device, BUT:
Google is removing more and more support for our device, as it already is pretty old. So we need to re-add everything.
Even if it's booting, we still need a lot of work in order to get the most important stuff working (like SurfaceFinger, Audio, and ofc also data/RIL)
So regarding 4.4, all I can say is: Have patience
BTW, Thread moved to Q&A section
JoinTheRealms said:
4.3 still isnt mature enough on this device to call it stable.
Click to expand...
Click to collapse
im using pa 3.99 rc2 wich is 4.3 and it is perfectly stable, has great performance and no big bugs, i use it as a daily driver and it is the most perfect rom i used on my p880 till date
~MaX~ said:
im using pa 3.99 rc2 wich is 4.3 and it is perfectly stable, has great performance and no big bugs, i use it as a daily driver and it is the most perfect rom i used on my p880 till date
Click to expand...
Click to collapse
Yes they are functionally stable to a user, but to call a rom stable (at least by Cyanogenmods standards) requires more than that.
JoinTheRealms said:
Yes they are functionally stable to a user, but to call a rom stable (at least by Cyanogenmods standards) requires more than that.
Click to expand...
Click to collapse
please define stable then
~MaX~ said:
please define stable then
Click to expand...
Click to collapse
Doesn't use dirty patch code to fix issues in source, usually done to get a release out quicker, between release candidates to stable this code is refined.
JoinTheRealms said:
Doesn't use dirty patch code to fix issues in source, usually done to get a release out quicker, between release candidates to stable this code is refined.
Click to expand...
Click to collapse
Well.... Thank you
That's Well explained
I hope you are working on 4.4 rom
laufersteppenwolf said:
Gonna join this group, too
4.4 sure is on its way for our device, BUT:
Google is removing more and more support for our device, as it already is pretty old. So we need to re-add everything.
Even if it's booting, we still need a lot of work in order to get the most important stuff working (like SurfaceFinger, Audio, and ofc also data/RIL)
So regarding 4.4, all I can say is: Have patience
BTW, Thread moved to Q&A section
Click to expand...
Click to collapse
i'm really excited to see you releasing the 4.4 rom Aosp or custom, anyway your work is cool
You guys really doing great work here so l know that stable 4.4 will come eventually
Sent from my HTC Explorer A310e using Tapatalk 2
JoinTheRealms said:
Doesn't use dirty patch code to fix issues in source, usually done to get a release out quicker, between release candidates to stable this code is refined.
Click to expand...
Click to collapse
Sometimes it's still necessary to do. This is the case with our EGL libs for example. The best would be getting an update from LG, but this is very unlikely to happen. I got 4.3 BSP partially working, updated all graphics-related libs to 4.3 from grouper, but it broke a few things. Porting the full BSP might not be even possible.
Regarding Omni 4.4, I gradually found probably all needed patches for it, will see when I get to computer.
Sent from my OmniROM-powered LG Optimus 4X HD
For Development Related Requests :
#1. Please begin your post with "Request:". You don't have to mention me. It's very important to have "Request:" (formatting doesn't matter) at the beginning of your post as I don't check the posts manually — I use the TapaTalk API to filter them.
#2. Describe your request in details. Make sure to include any additional info or screenshots you may think helpful.
Please DO NOT ASK QUESTIONS ON THIS THREAD.....This Is A Pure Android One Device Development Request Thread!
Reserved
Request
Make Paranoid Android 4.45 if are willing to build a ROM for Android One...
4.45 is the latest stable version out there, 4.5 is in alpha but it's good though with L styled recent apps switching
I'd say, go for PA as we already have CM11 and OMNI ROM in progress. Rest is your choice :good:
paranoid android
Dear Dev,
Please make a rom woith fully stable version....omni rom is nice but it has some few bugs...please correct it...
and also make paranoid android rom for android one devices...
and also please post link of original stock roms of android one devices and full procedure first.....
thanks
mahesh.g
psychopac said:
Make Paranoid Android 4.45 if are willing to build a ROM for Android One...
4.45 is the latest stable version out there, 4.5 is in alpha but it's good though with L styled recent apps switching
I'd say, go for PA as we already have CM11 and OMNI ROM in progress. Rest is your choice :good:
Click to expand...
Click to collapse
As Quoted [email protected]##W4TCH0UT## on Facebook looks like he is building AOSPA...should ask him! ?
Kunal.Kene.1797 said:
As Quoted [email protected]##W4TCH0UT## on Facebook looks like he is building AOSPA...should ask him! ?
Click to expand...
Click to collapse
He released paranoid android .. Hope Sim issue's sort out as quickly as possible..
deccen90 said:
He released paranoid android .. Hope Sim issue's sort out as quickly as possible..
Click to expand...
Click to collapse
Its Source Is Damaged...No Customization Options Available except (Theme Engine) hope He Fixes It Soon:highfive:
Kunal.Kene.1797 said:
Its Source Is Damaged...No Customization Options Available except (Theme Engine) hope He Fixes It Soon:highfive:
Click to expand...
Click to collapse
Now I get it. PA hasn't actually updated their customization options source since jellybean. They're trying hard to bring it back, but no luck. Paranoid Android 4.4.4 has NO CUSTOMIZATION options.
##W4TCH0UT## said:
Now I get it. PA hasn't actually updated their customization options source since jellybean. They're trying hard to bring it back, but no luck. Paranoid Android 4.4.4 has NO CUSTOMIZATION options.
Click to expand...
Click to collapse
That made me cry...i loved PA a lot [emoji22]...well then what will you be working on next [emoji4] ?
Posted Using Android One SmartPhone Using Tapatalk.
Kunal.Kene.1797 said:
That made me cry...i loved PA a lot [emoji22]...well then what will you be working on next [emoji4] ?
Posted Using Android One SmartPhone Using Tapatalk.
Click to expand...
Click to collapse
It's a secret
##W4TCH0UT## said:
It's a secret
Click to expand...
Click to collapse
Well I and WE Love Them [emoji6]
Posted Using Android One SmartPhone Using Tapatalk.
##W4TCH0UT## said:
It's a secret
Click to expand...
Click to collapse
Port miui ROM lots of people losing great android one mobiles with kernel sources for that ROM..[emoji6]
Miui sucks
deccen90 said:
Port miui ROM lots of people losing great android one mobiles with kernel sources for that ROM..[emoji6]
Click to expand...
Click to collapse
Uses A Lot Of RAM ANd Slows DOwn The Performance! Even Visually not of my liking!
Please develop kernels with "double tap to wake up device" feature
Kernel for overlcocking
REQUEST
A kernel with options available for overclocking. There is the Thunderzap kernel...but it doesn't allow overclocking..
Pleaser work on it! Please!
Thanks in advance :victory: :laugh: :laugh: :good:
I'm on stock rooted ROM with custom kernel and recovery with some bloat removed even planning to flash custom roms .... how to make my mobile ready for android lollipop update give multiple options ??
pls port siyah kernel or any other dual boot kernel
hey devs...pls port siyah or any other dual boot kernel....i want one permanent rom which will be stable and one rom with which i can play with..........and more there will be no issue of restoring stock rom again nd again.....thnqqq devs....rock on.....jai mata di
kapish said:
hey devs...pls port siyah or any other dual boot kernel....i want one permanent rom which will be stable and one rom with which i can play with..........and more there will be no issue of restoring stock rom again nd again.....thnqqq devs....rock on.....jai mata di
Click to expand...
Click to collapse
No need of dual boot kernel just backup ROMs it will backup kernel, ROM just restore .. I'm switching from stock to cm11 without any issue's
deccen90 said:
No need of dual boot kernel just backup ROMs it will backup kernel, ROM just restore .. I'm switching from stock to cm11 without any issue's
Click to expand...
Click to collapse
but backups from cwm are very huge like 800mb..........and can u tell me whats r the bugs in cm11...can i use it for daily purpose
kapish said:
but backups from cwm are very huge like 800mb..........and can u tell me whats r the bugs in cm11...can i use it for daily purpose
Click to expand...
Click to collapse
It's as stable as stock with sim2 data error ..agps fixed on upcoming release .. I'm using it as daily drive more battery backup on standby
FPBug: Meet the very first stable kernel for the Galaxy S2 i9100, S2 AT&T i777, S2 Epic 4G Touch d710 and Note n7000 since Gingerbread days
Every single Android 4.x kernel for these devices has had a serious bug (FPBug) that randomly corrupts the state of processes, starting with Samsungs's stock ICS and JB and spanning every custom kernel out there newer than Gingerbread.
Please refer to the main thread for details.
Downloads
You will find kernels for various CyanogenMod releases, M-snapshots and nightlies here.
XDA:DevDB Information
FPBug-n7000, Kernel for the Samsung Galaxy Note GT-N7000
Contributors
Lanchon
Source Code: https://www.androidfilehost.com/?w=files&flid=22853
Kernel Special Features:
Version Information
Status: Testing
Created 2014-12-19
Last Updated 2014-12-19
Thank you!
Will test it and get back to you!
This... this is awesome...
slimkat last version wifi not turning on!
180490 said:
slimkat last version wifi not turning on!
Click to expand...
Click to collapse
lol these are cyanogenmod kernels!!!
@Lanchon thank you soooo much for all of your hard work for our device even tho you don't even own them!
Hope this is not rude, but may I ask if you plan on releasing a kernel (or kernels) for non-CM-based ROMs? Or are you planning to let them devs themselves merge the fix, and only release CM kernels?
Sorry if this was rude, please ignore me or sth if it was.
Once again, thank you for all or your hard work.
Wow thanks
Does FPBug related somehow to kitkat overheating and random reboots?
LAKAME_MAN said:
@Lanchon thank you soooo much for all of your hard work for our device even tho you don't even own them!
Hope this is not rude, but may I ask if you plan on releasing a kernel (or kernels) for non-CM-based ROMs? Or are you planning to let them devs themselves merge the fix, and only release CM kernels?
Sorry if this was rude, please ignore me or sth if it was.
Once again, thank you for all or your hard work.
Click to expand...
Click to collapse
nothing rude! i will only release kernels for CM. but i published the fix and others will merge it into their kernels soon
Lanchon said:
nothing rude! i will only release kernels for CM. but i published the fix and others will merge it into their kernels soon
Click to expand...
Click to collapse
Yep, I'm cooking something right now for Touchwiz and AOSP. The fix seems to be working well, tested with the detector.
ASMI1 said:
Wow thanks
Does FPBug related somehow to kitkat overheating and random reboots?
Click to expand...
Click to collapse
yes!
Lunchon, if i may, a paired request Could you make a TRIM + FPbug kernel, for LP ?
Wow! You're a hero, been using your kernel only for 24h, but no problems yet. One question tough, can i switch to the ART runtime when using your kernel, or should i stay on dalvik?
daedric said:
Lunchon, if i may, a paired request Could you make a TRIM + FPbug kernel, for LP ?
Click to expand...
Click to collapse
dont know what LP is. is it a rom? then no!
pls ask you kernel maintainer to merge
mkalic said:
Wow! You're a hero, been using your kernel only for 24h, but no problems yet. One question tough, can i switch to the ART runtime when using your kernel, or should i stay on dalvik?
Click to expand...
Click to collapse
dont know. answer is same answer that applies to the standard CM kernel
Sorry,I'm new to all of this. I've all but given up on a stable kitkat experience on my good old note, but you madw it happen. Thank you, and happy hollidays!
Lanchon said:
dont know what LP is. is it a rom? then no!
pls ask you kernel maintainer to merge
Click to expand...
Click to collapse
By lp he means android 5.0 overall. Not specific rom. Are you able to prepare lollipop kernel for community?
Sent from my GT-N7000 using XDA Free mobile app
KalZakath said:
By lp he means android 5.0 overall. Not specific rom. Are you able to prepare lollipop kernel for community?
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
the fpbug should be integrated in cm soon. so i think official cm will be fixed long before cm12 is released.
mkalic said:
Wow! You're a hero, been using your kernel only for 24h, but no problems yet. One question tough, can i switch to the ART runtime when using your kernel, or should i stay on dalvik?
Click to expand...
Click to collapse
I`m using ART with latest CM11 and this kernel — everything is working fine for me.
Lanchon said:
the fpbug should be integrated in cm soon. so i think official cm will be fixed long before cm12 is released.
Click to expand...
Click to collapse
Fpbug- yes, but what with trim?
Sent from my GT-N7000 using XDA Free mobile app
Grok said:
I`m using ART with latest CM11 and this kernel — everything is working fine for me.
Click to expand...
Click to collapse
Just switched to SlimSaber, i don't like CM. The developer included the FPbug fix and it runs great with ART.