Related
Please help i just isntalled new ROM for my xperai x8 and now when i restarted it it is stuck at SE logo and stays there.I tried to enter to xrecovery but it cant enter like i dont have xrecovery but i actually do. Now when i try to put my phoen i nflash mode it says taht my usb device isnt recognised but it was a day ago. Moreover i reinstalled windwos usb drivers and Xperia SEMC flash drivers to see if this is the problem but its not it still cant recognise it so i am stuck at SE logo , xrecovery cant run , myPC doesnt recognise the phone in flash mode.... Please help !
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
yes
WhatWhatInTheButt said:
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
Click to expand...
Click to collapse
thanks mate i will try it now
lol
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
also
also flash tool in the console says that it cant determine what deviec i am plugging into and cant display what is busybox version or anything like i am putting an unknown device...
27/043/2012 15:43:10 - ERROR - Cannot identify your device. Found sh while expecting X10, E10, U20 or E15 (read from ro.product.model from build.prop)
Hey there, my phone isn't bricked...but I think I have too much data (possibly conflicting roms installed at the same time??) and I wish to reset my phone to its original status... I wish to re-install a ROM on it, but I want to start fresh again by removing the rooting programs or what have you..
Would following these steps put it all back to its original setting, also meaning that I could completely wipe the SD clean?
If so, would this mean I would have to re-root my X8? Not that it would be a problem but I would just like to know if it would be needed!
Thanks!
Regards,
Nev51289
yes
Nev51289 said:
Hey there, my phone isn't bricked...but I think I have too much data (possibly conflicting roms installed at the same time??) and I wish to reset my phone to its original status... I wish to re-install a ROM on it, but I want to start fresh again by removing the rooting programs or what have you..
Would following these steps put it all back to its original setting, also meaning that I could completely wipe the SD clean?
If so, would this mean I would have to re-root my X8? Not that it would be a problem but I would just like to know if it would be needed!
Thanks!
Regards,
Nev51289
Click to expand...
Click to collapse
Yes do as the guy above said...No need to root your phone
Sorry, just to clarify - you mean I wouldn't need to go through the whole rooting process again after doing a full reset/wipe what have you? Thanks by the way
lol
Nev51289 said:
Sorry, just to clarify - you mean I wouldn't need to go through the whole rooting process again after doing a full reset/wipe what have you? Thanks by the way
Click to expand...
Click to collapse
if you want to restore the stock rom (original androdi on xperia x8) with pc Comapnion than you dont need to root it again. But if you want to change it to custom rom and you have done full wipe i think you should root it again (rooting is done so taht you can change the busybox version of the phone and upload xrecovery if you have those you don't need to root)
eastman47 said:
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
Click to expand...
Click to collapse
Why don't you download the store Rom annd use Flashtool to flash it? Then you may be able to upgrade to latest revision with PCC.
eastman47 said:
if you want to restore the stock rom (original androdi on xperia x8) with pc Comapnion than you dont need to root it again. But if you want to change it to custom rom and you have done full wipe i think you should root it again (rooting is done so taht you can change the busybox version of the phone and upload xrecovery if you have those you don't need to root)
Click to expand...
Click to collapse
Can I consequently delete Busybox? If it is a deleteable app that is!
use the update service
eastman47 said:
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
Click to expand...
Click to collapse
Yeah, I lost you somewhere... If after taking out the battery, you CAN NOT enter xrecovery or CWM, then, you either can try THIS THREAD <--- go on, click on it!, or, you have to do what I had to do a couple of times, which is to restore your X8 to its original state, and to do that with Sony PC Companion, you first have to UNINSTALL your current PC Companion!!! THEN, restart your PC, and install a clean version of Sony PC Companion 2.1!
IT DOESN'T MATTER IF YOU HAVE THE LATEST VERSION of PC Companion, YOU STILL HAVE TO UNINSTALL IT, AND INSTALL IT AGAIN!!! IF YOU DON'T, THERE's a 99% CHANCE THAT PC COMPANION WILL NOT RECOGNIZE YOUR PHONE!!! ...I don't know why, but it's probably some marketing trick, since I once used this method 3 times in a row, then the fourth time PC Companion didn't recognize my X8. This happened on both, the old PC Companion, and the current Sony version 2.1. I tested them both on purpose, to eliminate the possibility that I damaged my X8's hardware somehow, during a high speed impact collision with the bedroom wall...
Once you reinstall Sony PC Companion 2.1, go back to my first post to your problem, and follow it step-by-step.
AND yes, if you want to install custom ROM's again, then you will have to ROOT your phone again, and UNLOCK the BOOTLOADER, etc...
BUT, if it's a soft-brick, then you might be able to redeem yourself
ViVA FIDELINO!
how about kernel?
WhatWhatInTheButt said:
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
Click to expand...
Click to collapse
>> how about kernel? for example your phone allready back to 2.1 rom and you are using custom kernel before i done this update? like kernel aA-11? is it possible to turn on phone even if im using custom kernel? please give me steps how to bring it back, because im currenty using mini cm7 / kernel aA-11, and i want to bring back my xperia x8 to original rom and kernel
Try downloading the stock rom and a diff version of flashtool. I can't remembet which version is most recommended (try searchibg xda - i read it here). install drivers in flashtool's driver folder (gordon's gate) then try again. Almost the same thing happened to me. PCC won't recognize my phone so I couldn't install the drivers.
X8 stuck at SE logo
I am facing same problem. I have been using GingerDX for long time wanted to change the ROM, however after I change the rom through Xrecovery. Phone restarted and stuck at SE logo.
I tried with SE PC companion but it gives error.
I tried Flashtool, used different ftf file but cant help.
Please help. I am unable to start phone....Please guide me...
Maybe u can also try sus (sony update service). I have experience this n done with sus.
Me n my W8:-D
Vishal9890 said:
I am facing same problem. I have been using GingerDX for long time wanted to change the ROM, however after I change the rom through Xrecovery. Phone restarted and stuck at SE logo.
I tried with SE PC companion but it gives error.
I tried Flashtool, used different ftf file but cant help.
Please help. I am unable to start phone....Please guide me...
Click to expand...
Click to collapse
The best way, if u still can't get on your phone , is take it to the SE Customer care. And don't tell a word about rooting or anything. Just ask them to repair the phone, saying that one morning, the SE logo kept on popping up.
Sent from my XPERIA W8 using xda platinum
I have YouTube video tutorial on my channel - search GaganSJ1 in YouTube and scroll down till you found
Press thanks if it helped
Sent from my E15i using XDA
eastman47 said:
Please help i just isntalled new ROM for my xperai x8 and now when i restarted it it is stuck at SE logo and stays there.I tried to enter to xrecovery but it cant enter like i dont have xrecovery but i actually do. Now when i try to put my phoen i nflash mode it says taht my usb device isnt recognised but it was a day ago. Moreover i reinstalled windwos usb drivers and Xperia SEMC flash drivers to see if this is the problem but its not it still cant recognise it so i am stuck at SE logo , xrecovery cant run , myPC doesnt recognise the phone in flash mode.... Please help !
Click to expand...
Click to collapse
check out this video http://www.youtube.com/watch?v=l7B-7tDaB5U
press thanks if it helped
Hey guys,
After messing around with the early lollipop bulids I decided to go back to Sony Stock Firmware.
But if I connect the device in flashmode to the computer with flashtool running (no ftf prepared) it just reboots after some seconds.
Is that because no ftf is going to be flashed or is something wrong with my phone or the drivers installed on my PC?
Im just to afraid to try it because I know how a phone looks when it disconnects from the PC while flashing something like bootloader. :crying:
thanks in advance
mischa_martin
mischa_martin said:
Hey guys,
After messing around with the early lollipop bulids I decided to go back to Sony Stock Firmware.
But if I connect the device in flashmode to the computer with flashtool running (no ftf prepared) it just reboots after some seconds.
Is that because no ftf is going to be flashed or is something wrong with my phone or the drivers installed on my PC?
Im just to afraid to try it because I know how a phone looks when it disconnects from the PC while flashing something like bootloader. :crying:
thanks in advance
mischa_martin
Click to expand...
Click to collapse
could you explain little bit more what happen etc. The more info you give, easier for us to answer.
Try reinstall/update drivers and Flashtool.
Kill adb.exe processes tab on task manager too.
Best idea is to load the ftf in flashtool and wait until it says plug phone in
yes.if you dont have anything to flash on phone the phone will reboot after u connect it to usb cause it thinks all flashing progress is done
prepare the ftf and when the notification is showing up in flashtool then connect your z1.
Hi all,
Not really sure where to post this, so firgured id put it under general questions. I am currently trying to flash android 4.2 to an Xperia Z1 thats currently running 4.4.4 kitkat. - Now feel i should mention at the start, that i am not particually brilliant with android, and am slowly learning the basics.
I am using a program called Flashtool, I have the file that I want to flash over (the 4.2) - I have also gone through the program to install all the drivers. ( I have installed all drivers as i didnt know what i needed and didnt need, and initially tried just installing the z1 drivers ) Flashtool picks up my phone, and tells me what its currently running, it also detects that what version of android i am currently running, but for some reason dosent pick up that ive tried to plug in my phone in flash mode.
The system detects when I start the phone in fastboot mode, but whenever I use Flashtools to try and connect my phone in flash mode, it just keeps asking me to connect the phone. ( I am using Z1 and the standard key is vol down whilst plugging it into the usb cable, however the l.e.d. flashes red and green quickly and then shuts off, cant even be sure that the problem is Flashtools, it might be that i havent put it into flashmode properly??)
any help would be brillant, feel free to contact me via the xda site, or via e-mail [email protected] -
This might be a particularly basic problem to somebody, its had me stumped for days, any help you could give would be massively appreciated,
cheers
Try Older version of flashtool or you are missing some drivers in flashtool folder is file with drivers and you need to check flashtool drivers and z1 drivers and firstly connect the phone and wait to install drivers and next turn off phone and hold vol down and connect without flashtool to install flashtmode drivers and at the end try to flash via flashtool.
If you are sure you have installed drivers correctly then kill any other process on your pc which use adb drivers like pc companion or airdroid etc. Or use other usb port. Or use other pc. Wrong thread though.
mosespl said:
Try Older version of flashtool or you are missing some drivers in flashtool folder is file with drivers and you need to check flashtool drivers and z1 drivers and firstly connect the phone and wait to install drivers and next turn off phone and hold vol down and connect without flashtool to install flashtmode drivers and at the end try to flash via flashtool.
Click to expand...
Click to collapse
Thanks, will try the older version of flashtool to see if that makes a difference, still not sure ive got the Z1 in flashmode though, isnt a light suppose to stay on, rather than blink once? Anyway thanks for the help, will update
dan34321 said:
Thanks, will try the older version of flashtool to see if that makes a difference, still not sure ive got the Z1 in flashmode though, isnt a light suppose to stay on, rather than blink once? Anyway thanks for the help, will update
Click to expand...
Click to collapse
Update: phone now knows its in flash mode, however flashtool gets stuck on 'proccessing loader'?
you have been brilliant so far? Any guesses?
cheers
Dan
dan34321 said:
Update: phone now knows its in flash mode, however flashtool gets stuck on 'proccessing loader'?
you have been brilliant so far? Any guesses?
cheers
Dan
Click to expand...
Click to collapse
Re-download Rom i have same situation and I downloaded room again and it works
SORTED - Thanks all, managed to root, but have a fresh problem
mosespl said:
Re-download Rom i have same situation and I downloaded room again and it works
Click to expand...
Click to collapse
Thanks all, have now successfully rooted the phone, unfortunately for me that has yielded more questions than answers loll,
Now that its rooted, its running 4.2.2 and I am wondering if there is a way of keeping root access, but flashing it back up to 4.4.?
Really grateful to everyone!!
dan34321 said:
Now that its rooted, its running 4.2.2 and I am wondering if there is a way of keeping root access, but flashing it back up to 4.4.?
Click to expand...
Click to collapse
Just Flash already rooted 4.4 rom on it, should work !
If you are afraid of losing apps backup them with Titanium !
Hi.
I have problem with my Xperia Z C6603. After an update from PC Companion, phone doesn't start, because of bootloop. It show xperia logo and after turns into a black screen.
In past I was using stock 4.4 android with unlocked bootloader, but I restored TA Partition and I think that messed up the update.
I tried to repair software in PC Companion, but that didn't help. Effects - the same as before. When I try to flash new firmware in Flashtool it show "Processing of loader.sin finished with errors" and abort. I tried on different PC and tft but it's the same. Drivers are installed.
Do you have any ideas how to solve my problem? I will be very grateful.
PS Sorry for my English - I'm not native speaker
Gustlik11 said:
Hi.
I have problem with my Xperia Z C6603. After an update from PC Companion, phone doesn't start, because of bootloop. It show xperia logo and after turns into a black screen.
In past I was using stock 4.4 android with unlocked bootloader, but I restored TA Partition and I think that messed up the update.
I tried to repair software in PC Companion, but that didn't help. Effects - the same as before. When I try to flash new firmware in Flashtool it show "Processing of loader.sin finished with errors" and abort. I tried on different PC and tft but it's the same. Drivers are installed.
Do you have any ideas how to solve my problem? I will be very grateful.
PS Sorry for my English - I'm not native speaker
Click to expand...
Click to collapse
For now unlock the bootloader again. It'll wipe the TA. I had the same issue but sony repair service (PC) helped. Try unlocking then reflash.
Note: TA partition - DRM keys are unique for each device, flashing TA from another xperia z will result in bricking the device.
If it works with unlocked BL and you still want to restore TA look for a tutorial (maybe your TA got messed up).
Note2: if it works you could use DRM function Restore MOD - it restores the functionality of the DRM content and it really works (eg. Advanced camera functions, bravia engine, etc etc.).
Thanks mate for advice. I unlocked bootloader and flashed custom kernel with recovery. I managed to flash a CM 12 and now phone works.
But the problem is still that I cant flash stock rom. I tried a few different versions of lollipop, and no matter which I flash, I get black screen and bootloop. Do I have to relock bootloader to get it work?
I'm running on stock 5.1.1 on UB with Zombie kernel, try to repair it with PC Companion, it have integrated SUS so you can flash even if you phone isn't booting and should fix it.
Good Luck.
Sent from my D2303
how can downgrade my xperia Z1 after installing nougat AOSP
I'm using Ubuntu 16.04
I tried installing with flashtool but cannot detect the phone in flashmode !
the code *#*#7378423#*#* doens't return anything !
m3asmi said:
how can downgrade my xperia Z1 after installing nougat AOSP
I tried installing with flashtool but cannot detect the phone in flashmode !
the code *#*#7378423#*#* doens't return anything !
Click to expand...
Click to collapse
have you check android debugging and unknown sources?
pattriccio said:
have you check android debugging and unknown sources?
Click to expand...
Click to collapse
yes I did
I installed flashtool in windows now I solved the problem
hi, i am using flashtool on windows and my flashtool doesnt recognize my phone in flashmode, win does recognize phone as somc device, any help would be appreciate.
ajdin.cekic said:
hi, i am using flashtool on windows and my flashtool doesnt recognize my phone in flashmode, win does recognize phone as somc device, any help would be appreciate.
Click to expand...
Click to collapse
follow this tutorial https://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614
thank you, i tried as you said but nothing happend again when i put my phone in flashmode flashtool doesnt recognize it again you can see it on
http://prntscr.com/ejwx09
ajdin.cekic said:
thank you, i tried as you said but nothing happend again when i put my phone in flashmode flashtool doesnt recognize it again you can see it on
http://prntscr.com/ejwx09
Click to expand...
Click to collapse
OK, so I'm gonna assume that you have at least a working recovery. Here's a possible solution: Have you tried flashing a stock based custom ROM (e.g: Kryptonian, MX Rom or DStrikers Z1 Kai)? Then, from there you can flash a pure stock via flashtool.
guys, this was mentioned a couple times already, best way is to download Emma from Sony and flash the official software. Then you can flash a kernel via fastboot again and all should work. This is due to Nougat is corrupting the apps log partition which is not in use there, but is required for stock Lollipop. I did that a couple times and all worked fine...
Ok, i will try the mxrom and than, but i tried that already and do i need first to lock my bootloader and then flash stock, emma didnt recognice my phone same as flashtool and one thing more, i tried to flash kernel sin from ftf via fastboot bud it says image is not boot image and says fail. I tried on win 10 same to do win recognizes phone as somc bit flashtool doesnt recognize phone.