[Q] Xperia x8 bricked - XPERIA X8 Q&A, Help & Troubleshooting

Please help i just isntalled new ROM for my xperai x8 and now when i restarted it it is stuck at SE logo and stays there.I tried to enter to xrecovery but it cant enter like i dont have xrecovery but i actually do. Now when i try to put my phoen i nflash mode it says taht my usb device isnt recognised but it was a day ago. Moreover i reinstalled windwos usb drivers and Xperia SEMC flash drivers to see if this is the problem but its not it still cant recognise it so i am stuck at SE logo , xrecovery cant run , myPC doesnt recognise the phone in flash mode.... Please help !

This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.

yes
WhatWhatInTheButt said:
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
Click to expand...
Click to collapse
thanks mate i will try it now

lol
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.

also
also flash tool in the console says that it cant determine what deviec i am plugging into and cant display what is busybox version or anything like i am putting an unknown device...
27/043/2012 15:43:10 - ERROR - Cannot identify your device. Found sh while expecting X10, E10, U20 or E15 (read from ro.product.model from build.prop)

Hey there, my phone isn't bricked...but I think I have too much data (possibly conflicting roms installed at the same time??) and I wish to reset my phone to its original status... I wish to re-install a ROM on it, but I want to start fresh again by removing the rooting programs or what have you..
Would following these steps put it all back to its original setting, also meaning that I could completely wipe the SD clean?
If so, would this mean I would have to re-root my X8? Not that it would be a problem but I would just like to know if it would be needed!
Thanks!
Regards,
Nev51289

yes
Nev51289 said:
Hey there, my phone isn't bricked...but I think I have too much data (possibly conflicting roms installed at the same time??) and I wish to reset my phone to its original status... I wish to re-install a ROM on it, but I want to start fresh again by removing the rooting programs or what have you..
Would following these steps put it all back to its original setting, also meaning that I could completely wipe the SD clean?
If so, would this mean I would have to re-root my X8? Not that it would be a problem but I would just like to know if it would be needed!
Thanks!
Regards,
Nev51289
Click to expand...
Click to collapse
Yes do as the guy above said...No need to root your phone

Sorry, just to clarify - you mean I wouldn't need to go through the whole rooting process again after doing a full reset/wipe what have you? Thanks by the way

lol
Nev51289 said:
Sorry, just to clarify - you mean I wouldn't need to go through the whole rooting process again after doing a full reset/wipe what have you? Thanks by the way
Click to expand...
Click to collapse
if you want to restore the stock rom (original androdi on xperia x8) with pc Comapnion than you dont need to root it again. But if you want to change it to custom rom and you have done full wipe i think you should root it again (rooting is done so taht you can change the busybox version of the phone and upload xrecovery if you have those you don't need to root)

eastman47 said:
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
Click to expand...
Click to collapse
Why don't you download the store Rom annd use Flashtool to flash it? Then you may be able to upgrade to latest revision with PCC.

eastman47 said:
if you want to restore the stock rom (original androdi on xperia x8) with pc Comapnion than you dont need to root it again. But if you want to change it to custom rom and you have done full wipe i think you should root it again (rooting is done so taht you can change the busybox version of the phone and upload xrecovery if you have those you don't need to root)
Click to expand...
Click to collapse
Can I consequently delete Busybox? If it is a deleteable app that is!

use the update service

eastman47 said:
It doesn't work it says that Pc companion was not able to connect to the device. I tried many things bu pc companion just cant connect my phone and windows keep saying that error that i am plugging unknown device which is a bull**** the day before it was working fine...
For all people who didnt understand iCANT ENTER IN FLASH MODE I MEAN I CAN BUT ITS NOT RECOGNISED so i cant update my software.
Click to expand...
Click to collapse
Yeah, I lost you somewhere... If after taking out the battery, you CAN NOT enter xrecovery or CWM, then, you either can try THIS THREAD <--- go on, click on it!, or, you have to do what I had to do a couple of times, which is to restore your X8 to its original state, and to do that with Sony PC Companion, you first have to UNINSTALL your current PC Companion!!! THEN, restart your PC, and install a clean version of Sony PC Companion 2.1!
IT DOESN'T MATTER IF YOU HAVE THE LATEST VERSION of PC Companion, YOU STILL HAVE TO UNINSTALL IT, AND INSTALL IT AGAIN!!! IF YOU DON'T, THERE's a 99% CHANCE THAT PC COMPANION WILL NOT RECOGNIZE YOUR PHONE!!! ...I don't know why, but it's probably some marketing trick, since I once used this method 3 times in a row, then the fourth time PC Companion didn't recognize my X8. This happened on both, the old PC Companion, and the current Sony version 2.1. I tested them both on purpose, to eliminate the possibility that I damaged my X8's hardware somehow, during a high speed impact collision with the bedroom wall...
Once you reinstall Sony PC Companion 2.1, go back to my first post to your problem, and follow it step-by-step.
AND yes, if you want to install custom ROM's again, then you will have to ROOT your phone again, and UNLOCK the BOOTLOADER, etc...
BUT, if it's a soft-brick, then you might be able to redeem yourself
ViVA FIDELINO!

how about kernel?
WhatWhatInTheButt said:
This method will install the original software on your X8!
If you have Sony PC Companion 2.1 on your PC, then uninstall it, and download and install Sony PC Companion 2.1, again! If not, then PC Companion might not recognize your phone. After installing do the following:
- Turn off the phone, and unplug it from the PC
- Turn on Sony PC Companion on your PC
- In PC Companion, enter the Support Zone tab
- Go to Update Phone Software
A window will pop out, saying that it cannot find your phone
- Click on Fix Phone
- Click on Continue
A window will pop out, saying that you will lose all your data
- TICK the BOX
- Click on continue
An update process will began.
Wait for it to show a window with all the SONY mobile phones
- Find your phone (X8)
- Click on the phone.
Now all you have to do is follow the on-screen instructions. It will tell you to hold the back button and plug your turned-off X8 to the PC, then it will erase everything, and download the original 2.1 ROM to your X8.
Click to expand...
Click to collapse
>> how about kernel? for example your phone allready back to 2.1 rom and you are using custom kernel before i done this update? like kernel aA-11? is it possible to turn on phone even if im using custom kernel? please give me steps how to bring it back, because im currenty using mini cm7 / kernel aA-11, and i want to bring back my xperia x8 to original rom and kernel

Try downloading the stock rom and a diff version of flashtool. I can't remembet which version is most recommended (try searchibg xda - i read it here). install drivers in flashtool's driver folder (gordon's gate) then try again. Almost the same thing happened to me. PCC won't recognize my phone so I couldn't install the drivers.

X8 stuck at SE logo
I am facing same problem. I have been using GingerDX for long time wanted to change the ROM, however after I change the rom through Xrecovery. Phone restarted and stuck at SE logo.
I tried with SE PC companion but it gives error.
I tried Flashtool, used different ftf file but cant help.
Please help. I am unable to start phone....Please guide me...

Maybe u can also try sus (sony update service). I have experience this n done with sus.
Me n my W8:-D

Vishal9890 said:
I am facing same problem. I have been using GingerDX for long time wanted to change the ROM, however after I change the rom through Xrecovery. Phone restarted and stuck at SE logo.
I tried with SE PC companion but it gives error.
I tried Flashtool, used different ftf file but cant help.
Please help. I am unable to start phone....Please guide me...
Click to expand...
Click to collapse
The best way, if u still can't get on your phone , is take it to the SE Customer care. And don't tell a word about rooting or anything. Just ask them to repair the phone, saying that one morning, the SE logo kept on popping up.
Sent from my XPERIA W8 using xda platinum

I have YouTube video tutorial on my channel - search GaganSJ1 in YouTube and scroll down till you found
Press thanks if it helped
Sent from my E15i using XDA

eastman47 said:
Please help i just isntalled new ROM for my xperai x8 and now when i restarted it it is stuck at SE logo and stays there.I tried to enter to xrecovery but it cant enter like i dont have xrecovery but i actually do. Now when i try to put my phoen i nflash mode it says taht my usb device isnt recognised but it was a day ago. Moreover i reinstalled windwos usb drivers and Xperia SEMC flash drivers to see if this is the problem but its not it still cant recognise it so i am stuck at SE logo , xrecovery cant run , myPC doesnt recognise the phone in flash mode.... Please help !
Click to expand...
Click to collapse
check out this video http://www.youtube.com/watch?v=l7B-7tDaB5U
press thanks if it helped

Related

[Q] How can I unbrick my X8?

Hy all, my X8 was frozen while installing CM 7.1 Stable, then it turned off. When I tried to turn it on it stuck at the SE logo, then freezed. I tried to get into my recovery and recover my phone, but I couldn't. Then i tried to repair it via PC Companion, but it said: ,,Your ip address is not allowed to update or repair brown phone. Please conect to the SEMC network." . Then I tried to flash 2.1 via Flashtool but it said install or reinstall my drivers. I did it, but the error came up again. Now I don't know what should I do to repair my X8. People said I should use SEUS but I couldn't find a working one for X8. If you can help me, please do!
Thanks for reading this thread, ChongWiz.
Sorry for bad english, I'm hungarian.
Install Gordon's Gate drivers inside flashtool's directory. Then try to flash newest original update by pressing back button through flashing. Flashtool should find your device and install smoothly. If you still have problems with drivers install newest PC Companion.
ChongWiz said:
Hy all, my X8 was frozen while installing CM 7.1 Stable, then it turned off. When I tried to turn it on it stuck at the SE logo, then freezed. I tried to get into my recovery and recover my phone, but I couldn't. Then i tried to repair it via PC Companion, but it said: ,,Your ip address is not allowed to update or repair brown phone. Please conect to the SEMC network." . Then I tried to flash 2.1 via Flashtool but it said install or reinstall my drivers. I did it, but the error came up again. Now I don't know what should I do to repair my X8. People said I should use SEUS but I couldn't find a working one for X8. If you can help me, please do!
Thanks for reading this thread, ChongWiz.
Sorry for bad english, I'm hungarian.
Click to expand...
Click to collapse
This may sound funny but it is real. Try the same process what you have done in another computer. I had the problem as you in my laptop. When I tried the process on my desktop computer it was like butter and I restored my phone software in just 15 mins.
I cant say the reason or logic behind but it worked.
Just have a try, you may succeed as me.
U can simply go to cybercafe or just work with another computer that all..
cheers
problem:
My friend had accidently deleted his \system folder and due to that,the phone on rebooting was stuck at the sony ericsson logo and would not go any further
solution:
1) charge the phone
2)download SEUS
3)connect usb port to pc.
4)Launch SEUS
5)When asked to plug the phone,plug the USB into the turned off phone(by removing and reinserting battery) and press the <-- and power button together and keep pressed until led turns green
6)the phone will be updated via SEUS
---------------
HIT THANKS IF THIS HELPED

Very Stuck in Sony Ericson x8

i was in Xrecovery>avanced moving stuffs and i did something like unmount something and restart, then my cel cant boot by any kind of stuffs, like flash, or press back botton. (sorry my english.)
now i cant make it boot stuck in Sony ericson logo.
Vlackrs said:
i was in Xrecovery>avanced moving stuffs and i did something like unmount something and restart, then my cel cant boot by any kind of stuffs, like flash, or press back botton. (sorry my english.)
now i cant make it boot stuck in Sony ericson logo.
Click to expand...
Click to collapse
Use PC companion or SUES to restore the original firmware back then re-root your phone and install your chosen ROM and boom you're back.
smyth12 said:
Use PC companion or SUES to restore the original firmware back then re-root your phone and install your chosen ROM and boom you're back.
Click to expand...
Click to collapse
GingerDX i have installed before this problem, i will try to do what you say, brb
Vlackrs said:
GingerDX i have installed before this problem, i will try to do what you say, brb
Click to expand...
Click to collapse
After re-rooting your phone you can once again install GingerDX.. Just don't mess with settings you're not sure of
PC companion not work cuz i cant boot my phone =( im stuck in sony ericson, and where i can find SUES? ty
SEUS is no longer available... you have to plug your phone into the computer, remove the battery, on PC companion it will say "Repair this phone" in small lettering, click that then with your phone connected to the computer via USB hold the back button and put your battery in, this will put your phone into Flash mode and allow PC companion to repair your phone
i love you dude, thank you, i will not mess up again with that XD, btw i have a year using this website is awesome, i was trying to learn more about Xrecovery and CWM ty!!
What do you mean you have a gear using this website?
CWM and Xrecovery can be dangerous..
No problem!
haha my bad, "year", btw PC companion cant find a software to install, right now im talking to Sony ericson.
i think cuz i have other baseband =S
Hmm, I had this problem, just yesterday infact, I still had access to recovery though... I'm not sure what you should do, I think SE will tell you to send the phone back to them to be honest..
yea my phone its dead, QQ, lets get iphone 5 this new year, ty Smyth12 anyways
Vlackrs said:
yea my phone its dead, QQ, lets get iphone 5 this new year, ty Smyth12 anyways
Click to expand...
Click to collapse
There still is a way to fix the phone using PC companion, the baseband doesn't matter.. as far as I know, don't quote me on that... hmm.. When I think of something I will let you know
Guys, forget PC Companion (PCC) and Update Service (SEUS) ...
If your phone still gets to the Sony Ericsson Logo, or still shows some sign of life so you can be sure that the bootloader and kernel (STOCK Kernel - I don't know if this works with custom kernels as well) is still alive, restore your device this way:
Make sure you have a Java Runtime installed.
If you're on a 64-Bit Windows Edition you NEED to have the 32-Bit JRE installed!
Make sure you have the Android drivers installed
(should already be the case if you installed PC Companion / Update Service)
Download Flashtool 0.2.9.1
Extract it to C:\Flashtool
Download Android 2.1.1.C.0.0
Copy the "X8_2.1.1.C.0.0._un.ftf" you just downloaded INTO the "firmwares" folder inside the Flashtool directory.
Disconnect your phone from the computer and turn it OFF!
Now start the X10FlashTool.exe in C:\Flashtool
Plug the USB cable into JUST your phone (NOT into the computer!).
Click "Flash" in Flashtool and select X8_2.1.1.C.0.0._un.ftf you copied into the Firmwares folder.
In the next window don't do anything, just click "OK"
Flashtool will show you a window about what you have to do:
- PRESS and HOLD the BACK button of your phone.
- Connect the USB cable to your computer. Keep the button PRESSED!
- If Windows is nagging about installing drivers - let it do its job. Keep the button PRESSED!
- Once you see output happening in Flashtool's window you can release the back button of the phone.
Patiently wait until flashing finished.
Now, as Flashtool will tell you ... disconnect the phone and turn it on.
BE PATIENT - the first boot can take a few minutes.
Once the phone booted up ...
Enable "Unknown Sources" and "USB Debugging" in your phone's settings.
Connect the phone back to the computer.
Press "Root" and let Flashtool root the Droid.
A automatic reboot will follow!
Once the phone finished rebooting ...
Press "Ask root perm" and look at your phone. You will get a popup from Superuser to grant su permissions. Confirm the request!
Now click "xRecovery" to inject xRecovery into your phone.
Done ...
Now you can go ahead and install a xRecovery compatible ROM (i.e. FroyoPro).
Download the ZIP you want to flash and push it to your phone's SD card. Example:
adb push C:\Users\<your_username>\Downloads\FroyoPro-v1.1.zip /sdcard
(you need to input that command in a Command Prompt)
If you want GingerDX back on your phone ...
- Download GingerDX v013 and copy it onto your phone's SD card (i.e. by ADB)
- Download GingerDX v020 and copy it onto your phone's SD card (i.e. by ADB)
- From Flashtool make the phone to reboot into xRecovery.
- Flash GingerDX v013 in xRecovery.
- Reboot
- Keep tapping on the screen once the Sony Ericsson Logo appears to get into CWM.
- Flash GingerDX v020 in CWM.
- Full-Wipe ("Factory Reset")
- Reboot
I just revived my X8 a few hours ago by this way after a update flash went terribly wrong for reasons I'm not able to tell.
ty, and ive trying to fix it but nop, nothing.
smyth12 said:
Hmm, I had this problem, just yesterday infact, I still had access to recovery though... I'm not sure what you should do, I think SE will tell you to send the phone back to them to be honest..
Click to expand...
Click to collapse
If you can access recovery, then simply install your rom agen.
Sent from my MT15i using Tapatalk
B.Jay said:
Guys, forget PC Companion (PCC) and Update Service (SEUS) ...
If your phone still gets to the Sony Ericsson Logo, or still shows some sign of life so you can be sure that the bootloader and kernel (STOCK Kernel - I don't know if this works with custom kernels as well) is still alive, restore your device this way:
Make sure you have a Java Runtime installed.
If you're on a 64-Bit Windows Edition you NEED to have the 32-Bit JRE installed!
Make sure you have the Android drivers installed
(should already be the case if you installed PC Companion / Update Service)
Download Flashtool 0.2.9.1
Extract it to C:\Flashtool
Download Android 2.1.1.C.0.0
Copy the "X8_2.1.1.C.0.0._un.ftf" you just downloaded INTO the "firmwares" folder inside the Flashtool directory.
Disconnect your phone from the computer and turn it OFF!
Now start the X10FlashTool.exe in C:\Flashtool
Plug the USB cable into JUST your phone (NOT into the computer!).
Click "Flash" in Flashtool and select X8_2.1.1.C.0.0._un.ftf you copied into the Firmwares folder.
In the next window don't do anything, just click "OK"
Flashtool will show you a window about what you have to do:
- PRESS and HOLD the BACK button of your phone.
- Connect the USB cable to your computer. Keep the button PRESSED!
- If Windows is nagging about installing drivers - let it do its job. Keep the button PRESSED!
- Once you see output happening in Flashtool's window you can release the back button of the phone.
Patiently wait until flashing finished.
Now, as Flashtool will tell you ... disconnect the phone and turn it on.
BE PATIENT - the first boot can take a few minutes.
Once the phone booted up ...
Enable "Unknown Sources" and "USB Debugging" in your phone's settings.
Connect the phone back to the computer.
Press "Root" and let Flashtool root the Droid.
A automatic reboot will follow!
Once the phone finished rebooting ...
Press "Ask root perm" and look at your phone. You will get a popup from Superuser to grant su permissions. Confirm the request!
Now click "xRecovery" to inject xRecovery into your phone.
Done ...
Now you can go ahead and install a xRecovery compatible ROM (i.e. FroyoPro).
Download the ZIP you want to flash and push it to your phone's SD card. Example:
adb push C:\Users\<your_username>\Downloads\FroyoPro-v1.1.zip /sdcard
(you need to input that command in a Command Prompt)
If you want GingerDX back on your phone ...
- Download GingerDX v013 and copy it onto your phone's SD card (i.e. by ADB)
- Download GingerDX v020 and copy it onto your phone's SD card (i.e. by ADB)
- From Flashtool make the phone to reboot into xRecovery.
- Flash GingerDX v013 in xRecovery.
- Reboot
- Keep tapping on the screen once the Sony Ericsson Logo appears to get into CWM.
- Flash GingerDX v020 in CWM.
- Full-Wipe ("Factory Reset")
- Reboot
I just revived my X8 a few hours ago by this way after a update flash went terribly wrong for reasons I'm not able to tell.
Click to expand...
Click to collapse
awesome i will try this!!! i will reply later.
taaviu said:
If you can access recovery, then simply install your rom agen.
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
im the problem not "smyth12", but i cant do anything not even get into my xrecovery, i think what i did was unmount the file system using recovery by error, or some important file to boot at least with Xrecovery.
@B.Jay
Its working!!! that .FTF save me!!! <33333333333 thank you!!!
Vlackrs said:
@B.Jay
Its working!!! that .FTF save me!!! <33333333333 thank you!!!
Click to expand...
Click to collapse
You're welcome mate.
Remember to keep the instructions and required files save in case you manage to soft-brick the device again.
i dont understand this .

Super Combo problem in my xperia x8.....

Well this is my first post here.
To be very short this is not a totally new problem. This is a combination of many problems that has made me totally helpless.
I had rooted my device using x8toolbox beta4, and installed a Gingerxperia V21 custom ROM.
After that i tried unlocking the bootloader, but flashtools continuously kept saying that my device was in MTP mode and strange enough there was no option in my phone's settings to change it.
So I went back to x8toolbox planning on installing the stock ROM back, when i saw busybox installer within.
I installed busybox 1.19.0 and then i asked x8toolbox to check the digitizer on my phone, AND THERE IT STARTED REBOOTING OVE AND OVER.
So now my phone can't connect to my pc for PCC repair or flashtools as MTP mode can't be switched off (and my phone won't turn on for the sd card to be read). And i am stuck with the Sony Ericsson Logo.
Please help me.....thanks in advance.
U have soft bricked your x8.
U can reset your x8 to original 2.1 with the help of following steps.
It's easy. Do it and rooted your phone again
forum.xda-developers.com/showthread.php?t=1570523
Officially corp via W8
Or just try Flashtool
i think your problem is flashing driver.. try to install on /flashtool/drivers/ the name of drivers is gordon gate.. but if your have a same problem after installed drivers, check your drivers on my computer/drivers.. or try for flashing on other computer..
leecorp said:
U have soft bricked your x8.
U can reset your x8 to original 2.1 with the help of following steps.
It's easy. Do it and rooted your phone again
forum.xda-developers.com/showthread.php?t=1570523
Officially corp via W8
Click to expand...
Click to collapse
Thanks for your answer..... But as I said my phone is still in MTP mode and doesn't seem to snap out of it. As i plug in my phone it turns on the green light and then starts rebooting as usual. Is it my driver 's issue? or is it just the mtp mode?? flashtool also says the same thing..:crying:
U cant keep it longer.
Open flashtool then select firmware and ok.
Wait till a screen appear.
Now connect ur phone by holiding back button.
Sent from my X8 using Tapatalk 2
bandarigoda123 said:
U cant keep it longer.
Open flashtool then select firmware and ok.
Wait till a screen appear.
Now connect ur phone by holiding back button.
Sent from my X8 using Tapatalk 2
Click to expand...
Click to collapse
But flashtools shows ERROR and flashing aborted and says that for 2011 line devices make sure your device is not in mtp mode....
Flashtools doesn't work that way....
Remember , wana unlock bootloader use stock rom to unlock. Do not use any install custom rom to unlock. Thing u have made a misstake.
kakho55 said:
Remember , wana unlock bootloader use stock rom to unlock. Do not use any install custom rom to unlock. Thing u have made a misstake.
Click to expand...
Click to collapse
So what to do now? Even if i can get my phone back can i unlock the bootloader (manufact. code: 11W33) ????
Help me plzz...
livinglegend9894 said:
So what to do now? Even if i can get my phone back can i unlock the bootloader (manufact. code: 11W33) ????
Help me plzz...
Click to expand...
Click to collapse
DONT UNLOCK!!!!!!!!!! HARD BRICK!
Sent from my E15i using xda premium
Don't try to unlock the Bootloader
If the error getting further, Re-install Windows.
It can't be, 3 weeks ago I had the same problem (MTP) .
I can't even install Apps via flashtool, so I try to connect to flashmode.
It works.
As I said try to Re-install windows.
Good Luck.

Please help to unbrick my xperia z

I am in an awkward situation.
xperia z, 4.2.2 244 rooted stock rom, bootloader locked, usb debug mode off, recovery not installed.
I accidentally corrupted build.prop and the phone bricked.
I cannot use flashtool to flash the stock rom back because usb debug mode is off.
I cannot use Sony update service Pro to force update because it said that "your phone already has the latest available software installed".
I cannot use PC Companion to repair because the software said that "Sony update engine doesn't have software available for your phone".
Please help.
wmiswm said:
I am in an awkward situation.
xperia z, 4.2.2 244 rooted stock rom, bootloader locked, usb debug mode off, recovery not installed.
I accidentally disrupted build.prop and the phone bricked.
I cannot use flashtool to flash the stock rom back because usb debug mode is off.
I cannot use Sony update service Pro to force update because it said that "your phone already has the latest available software installed".
I cannot use PC Companion to repair because the software said that "Sony update engine doesn't have software available for your phone".
Please help.
Click to expand...
Click to collapse
Use PC companion but try use repair phone not update. Wait till all phone model showing up than choose your model phone. btw, your phone must off.
than follow instruction there... wil take 1~2 hour for repair.
Hope you can solve your problem. ill take screen shoot when im home later than post here..
Sent from my C6602 using xda premium
YudiA1 said:
Use PC companion but try use repair phone not update. Wait till all phone model showing up than choose your model phone. btw, your phone must off.
than follow instruction there... wil take 1~2 hour for repair.
Hope you can solve your problem. ill take screen shoot when im home later than post here..
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Thank you very much for your reply. But I am already using the PC Companion repair option, and the response is as stated above.
flashtool is all what you need,read the instructions
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Reply
wmiswm said:
I cannot use flashtool to flash the stock rom back because usb debug mode is off
Click to expand...
Click to collapse
You can use Flashtool to flash stock rom, doesn't matter if usb debug mode is on or off (only needed to install recovery or to root)
Download stock rom, install flashtool + drivers and follow screen instructions.. Good Luck! :good:
J have the same problem, yesterday j installed cyanogenmod, now xperia Z was on SONY logo and j can't flash original firmware on flashtool, j can only flash original kernel, but is still on sony logo
SUS says that hasn't new firmware for my phone.
What can j do ????
Thanks in advance
gm007 said:
flashtool is all what you need,read the instructions
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
many thanks, done.
shysparrow said:
You can use Flashtool to flash stock rom, doesn't matter if usb debug mode is on or off (only needed to install recovery or to root)
Download stock rom, install flashtool + drivers and follow screen instructions.. Good Luck! :good:
Click to expand...
Click to collapse
yes, you are right. Yesterday I check everything on the right panel and it does not work. Today I leave all option unchecked and flash properly. Many thanks anyway.
maxam73 said:
J have the same problem, yesterday j installed cyanogenmod, now xperia Z was on SONY logo and j can't flash original firmware on flashtool, j can only flash original kernel, but is still on sony logo
SUS says that hasn't new firmware for my phone.
What can j do ????
Thanks in advance
Click to expand...
Click to collapse
Just follow the flashtool instruction and re-flash the stock rom first, everything will return to unroot stated. Reroot then and try again.
wmiswm said:
Just follow the flashtool instruction and re-flash the stock rom first, everything will return to unroot stated. Reroot then and try again.
Click to expand...
Click to collapse
Maybe j have other kind of problem, j tried with flashtool but it doesn't start flashing when in flashmode, after a minute phone boots itself continuosly on sony logo.
j tried several times with different PC and different ftf file.
j hope to solve this problem, but how...
maxam73 said:
Maybe j have other kind of problem, j tried with flashtool but it doesn't start flashing when in flashmode, after a minute phone boots itself continuosly on sony logo.
j tried several times with different PC and different ftf file.
j hope to solve this problem, but how...
Click to expand...
Click to collapse
Try this way bro.. Done in many Xperia here..
Solving Bootloop phone/Flash Tool can't Detect your phone.
Your Phone Must Off!! and not connected !!
1. Open Pc Companion
2. Click update on Red ellipse (in Picture 1)
3. Start on Phone/tablet Update (in Picture 2)
4. Click Repair on Next Screen
5. in Next Screen, Read that warning Click Continue if you OK
6. Next Step click on Red Circle than Next...
7. Wait initializing Software (10~30 mnt) or depend your ISP speed
8. After initializin9 All Xperia Phone List Will Show Up.
Choose What Xperia Phone Will you repair ( I choose XZ) than Next..
9. Follow instruction On picture.
( Connect USB on your Phone while Press Vol down )
10. if not Start.. Unplug usb and try plug again ==> same no 9)
11. After start.. Waiting 1~2 Hours till done.
(Read Warning There )
Sent from my C6602 using xda premium
YudiA1 said:
Try this way bro.. Done in many Xperia here..
Solving Bootloop phone/Flash Tool can't Detect your phone.
Your Phone Must Off!! and not connected !!
1. Open Pc Companion
2. Click update on Red ellipse (in Picture 1)
3. Start on Phone/tablet Update (in Picture 2)
4. Click Repair on Next Screen
5. in Next Screen, Read that warning Click Continue if you OK
6. Next Step click on Red Circle than Next...
7. Wait initializing Software (10~30 mnt) or depend your ISP speed
8. After initializin9 All Xperia Phone List Will Show Up.
Choose What Xperia Phone Will you repair ( I choose XZ) than Next..
9. Follow instruction On picture.
( Connect USB on your Phone while Press Vol down )
10. if not Start.. Unplug usb and try plug again ==> same no 9)
11. After start.. Waiting 1~2 Hours till done.
(Read Warning There )
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Solved...j know that phones must be off, the problem was flashtool, j used other version (beta 4) on other pc running xp instead of win7 and all goes good.
Thanks to all for helping me
Doesnt work.
I cant use flashtool, period.
Are there anyother methods?
theVenerable said:
Doesnt work.
I cant use flashtool, period.
Are there anyother methods?
Click to expand...
Click to collapse
The above didn't work for me because I received error based on my type of phone.
This guide however did help: http://forum.xda-developers.com/showthread.php?t=2240614
I had to reboot windows to a settings to enable unsigned drivers. Installed Flashtool and it's drivers,
First unlocked the bootloader(BLU button, got the IMEI, used the sony form (http://unlockbootloader.sonymobile.com/instructions))
Then I downloaded the stock sony xperia z ftf image, placed it in Flashtool's firmware folder, then flashed it (flash device > flash mode).
Now my phone's working again.
HTH,
George
brick,unbrick,xperia z problem,flashtool
My OS phone in recovery mode (root) got deleted And when I turn on phone stuck on Sony logo And when it is connected to the computer showing error your USB not recognized and Flash mode for use Flashtool doesn't work and the same error shows what should i do?
shayanster said:
My OS phone in recovery mode (root) got deleted And when I turn on phone stuck on Sony logo And when it is connected to the computer showing error your USB not recognized and Flash mode for use Flashtool doesn't work and the same error shows what should i do?
Click to expand...
Click to collapse
If you still can enter custom recovery, you only need flash rom and (with) suitable kernel.
If not, you need Flashtool.
- make sure you have the newest version of flashtool and driver
- connect your phone to pc.
- when computer show error about usb not recognized, go to computer management - device manager. Find something in universal serial bus controller list that have yellow triangle and exclamation mark. right click and remove it
- disconnect your phone then reboot your pc
- install flashtool and driver, reboot pc again
- connect your phone to pc. Now, it should detect your phone.
- do flashing procedure
cmiiw
visualfighter said:
If you still can enter custom recovery, you only need flash rom and (with) suitable kernel.
If not, you need Flashtool.
- make sure you have the newest version of flashtool and driver
- connect your phone to pc.
- when computer show error about usb not recognized, go to computer management - device manager. Find something in universal serial bus controller list that have yellow triangle and exclamation mark. right click and remove it
- disconnect your phone then reboot your pc
- install flashtool and driver, reboot pc again
- connect your phone to pc. Now, it should detect your phone.
- do flashing procedure
cmiiw
Click to expand...
Click to collapse
Thanks for the answer I tried all ways but the problem is not solved .I think the only solution is JTAG box
shayanster said:
Thanks for the answer I tried all ways but the problem is not solved .I think the only solution is JTAG box
Click to expand...
Click to collapse
To use Flashtool put phone in flashmode, it will not work in recovery mode
To put phone in flashmode
Hold power + both volume keys
wait till you feel three vibrations.
Make sure you have installed Z drivers flashmode drivers & fastboot drivers(Setup fille is in driver folder of flashtool)
Keep FTF file in firmware folder of flashtool
Start flashtool
Click the thunder button
select flashmode
select the FTF file
When it tells you to connect phone
Hold volume down key and connect USB it should start flashing
androidtweaker1 said:
To use Flashtool put phone in flashmode, it will not work in recovery mode
To put phone in flashmode
Hold power + both volume keys
wait till you feel three vibrations.
Make sure you have installed Z drivers flashmode drivers & fastboot drivers(Setup fille is in driver folder of flashtool)
Keep FTF file in firmware folder of flashtool
Start flashtool
Click the thunder button
select flashmode
select the FTF file
When it tells you to connect phone
Hold volume down key and connect USB it should start flashing
Click to expand...
Click to collapse
when it is connected into flashmode the computer showing error your USB not recognized
shayanster said:
when it is connected into flashmode the computer showing error your USB not recognized
Click to expand...
Click to collapse
Is it Windows 7 or 8?

[Q] Help needed urgently

Hi all,
Not really sure where to post this, so firgured id put it under general questions. I am currently trying to flash android 4.2 to an Xperia Z1 thats currently running 4.4.4 kitkat. - Now feel i should mention at the start, that i am not particually brilliant with android, and am slowly learning the basics.
I am using a program called Flashtool, I have the file that I want to flash over (the 4.2) - I have also gone through the program to install all the drivers. ( I have installed all drivers as i didnt know what i needed and didnt need, and initially tried just installing the z1 drivers ) Flashtool picks up my phone, and tells me what its currently running, it also detects that what version of android i am currently running, but for some reason dosent pick up that ive tried to plug in my phone in flash mode.
The system detects when I start the phone in fastboot mode, but whenever I use Flashtools to try and connect my phone in flash mode, it just keeps asking me to connect the phone. ( I am using Z1 and the standard key is vol down whilst plugging it into the usb cable, however the l.e.d. flashes red and green quickly and then shuts off, cant even be sure that the problem is Flashtools, it might be that i havent put it into flashmode properly??)
any help would be brillant, feel free to contact me via the xda site, or via e-mail [email protected] -
This might be a particularly basic problem to somebody, its had me stumped for days, any help you could give would be massively appreciated,
cheers
Try Older version of flashtool or you are missing some drivers in flashtool folder is file with drivers and you need to check flashtool drivers and z1 drivers and firstly connect the phone and wait to install drivers and next turn off phone and hold vol down and connect without flashtool to install flashtmode drivers and at the end try to flash via flashtool.
If you are sure you have installed drivers correctly then kill any other process on your pc which use adb drivers like pc companion or airdroid etc. Or use other usb port. Or use other pc. Wrong thread though.
mosespl said:
Try Older version of flashtool or you are missing some drivers in flashtool folder is file with drivers and you need to check flashtool drivers and z1 drivers and firstly connect the phone and wait to install drivers and next turn off phone and hold vol down and connect without flashtool to install flashtmode drivers and at the end try to flash via flashtool.
Click to expand...
Click to collapse
Thanks, will try the older version of flashtool to see if that makes a difference, still not sure ive got the Z1 in flashmode though, isnt a light suppose to stay on, rather than blink once? Anyway thanks for the help, will update
dan34321 said:
Thanks, will try the older version of flashtool to see if that makes a difference, still not sure ive got the Z1 in flashmode though, isnt a light suppose to stay on, rather than blink once? Anyway thanks for the help, will update
Click to expand...
Click to collapse
Update: phone now knows its in flash mode, however flashtool gets stuck on 'proccessing loader'?
you have been brilliant so far? Any guesses?
cheers
Dan
dan34321 said:
Update: phone now knows its in flash mode, however flashtool gets stuck on 'proccessing loader'?
you have been brilliant so far? Any guesses?
cheers
Dan
Click to expand...
Click to collapse
Re-download Rom i have same situation and I downloaded room again and it works
SORTED - Thanks all, managed to root, but have a fresh problem
mosespl said:
Re-download Rom i have same situation and I downloaded room again and it works
Click to expand...
Click to collapse
Thanks all, have now successfully rooted the phone, unfortunately for me that has yielded more questions than answers loll,
Now that its rooted, its running 4.2.2 and I am wondering if there is a way of keeping root access, but flashing it back up to 4.4.?
Really grateful to everyone!!
dan34321 said:
Now that its rooted, its running 4.2.2 and I am wondering if there is a way of keeping root access, but flashing it back up to 4.4.?
Click to expand...
Click to collapse
Just Flash already rooted 4.4 rom on it, should work !
If you are afraid of losing apps backup them with Titanium !

Categories

Resources