[Q] Looking for a howto - Galaxy Ace S5830 Q&A, Help & Troubleshooting

I own a Samsung Ace GT-S5830, it is currently running Cyanogenmod 7. CyanogenMod-7-20130301-NIGHTLY-cooper I did this a few months ago and I would like to flash it back to Android. As this was done a while back I have lost all of my bookmarks. Could someone please point me to some instructions to do this.

PendragonUK said:
I own a Samsung Ace GT-S5830, it is currently running Cyanogenmod 7. CyanogenMod-7-20130301-NIGHTLY-cooper I did this a few months ago and I would like to flash it back to Android. As this was done a while back I have lost all of my bookmarks. Could someone please point me to some instructions to do this.
Click to expand...
Click to collapse
Wrong section mate! There is a great Q&A Thread!
...
1. You should read this thread http://forum.xda-developers.com/showthread.php?t=1768181
2. Backup your current rom using CWM (do it via recovery)
3. Use Titanium Backup to save your bookmarks, or the data files from which ever app (even you can save de apk)... if you use Titanium Backup then when you restore the data you might face troubles in different roms (4.2.2 / 4.3).
4. To backup all your contacts use contacts app to export all of them to your sd
Now you are ready to flash a fresh stock or another custom rom

PendragonUK said:
I own a Samsung Ace GT-S5830, it is currently running Cyanogenmod 7. CyanogenMod-7-20130301-NIGHTLY-cooper I did this a few months ago and I would like to flash it back to Android. As this was done a while back I have lost all of my bookmarks. Could someone please point me to some instructions to do this.
Click to expand...
Click to collapse
Off topic
Do you feel the wi-fi slow compared with others cyanogenmod roms or the stock rom?
I used the nightlys of january, february and march (all) and my phone have slow wi-fi

CM7 ROMs are not totally bug-free. There have been GPS issues with several ROMs in the past. Also I till the date have never been able to use the phone on CM7 as a modem for computer as the modem (phone) doesn't respond. Also minute but Wi-Fi issues that prevailed previously seem to be sorted out eventually but expect no optimization.
If you want speed & stability with all the working features, use the stock based ROMs.
Sent from my GT-S5830 using xda app-developers app

Viper The Ripper said:
Wrong section mate! There is a great Q&A Thread!
...
1. You should read this thread http://forum.xda-developers.com/showthread.php?t=1768181
2. Backup your current rom using CWM (do it via recovery)
3. Use Titanium Backup to save your bookmarks, or the data files from which ever app (even you can save de apk)... if you use Titanium Backup then when you restore the data you might face troubles in different roms (4.2.2 / 4.3).
4. To backup all your contacts use contacts app to export all of them to your sd
Now you are ready to flash a fresh stock or another custom rom
Click to expand...
Click to collapse
Thanks for the info. I have successfully flashed a modified stock image.
Again thanks for the help guys...

Toyerd24 said:
Off topic
Do you feel the wi-fi slow compared with others cyanogenmod roms or the stock rom?
I used the nightlys of january, february and march (all) and my phone have slow wi-fi
Click to expand...
Click to collapse
When I was on CM7 nightly, the wifi was slow and had a bad connection. Donnu anymore which build I used.
Sent from my GT-S5830 using xda app-developers app

Related

[Q] Stable & Bug-free Kernel + Gingerbread ROM Combo

Hey everyone,
Just wanted to learn about your experience with the OB Kernel + ROM GB Mods.
My main interests are OC for games and clean, no useless apps ROMs for extended battery life and better performance.
I am also seeking out ROMs that won't bug the Wi-Fi or any other basic functionality of the device.
I was thinking CM7 or maybe NOVA 8. But I'm a noob so i want to hear some of the more experimented users' opinions.
Thanks in advance.
If you need a stable rom, please use nova 8 (froyo)
CM is built from AOSP and has many differences with stock roms. Sure it has more bugs than Nova, another advantage from CM is themes and expanded system settings.
Try it yourself, as long you have clockworkmod recovery you're freely to test CM and Nova which one that suits you.
Sent from my LG-P970 using Tapatalk
Thanks for the quick reply @lesp4ul.
1.) When the official GB update from LG comes out I must not update if I install NOVA 8 ?
2.) Themes and expanded settings that you say come with CM are not available on NOVA 8 ?
Off-topic: Love your signature pic. Made myself one too, whenever I'll be able to add it to my signature I will. Can't edit my signature now, for reasons i do not fully grasp.
PinkPantherRO said:
Thanks for the quick reply @lesp4ul.
1.) When the official GB update from LG comes out I must not update if I install NOVA 8 ?
2.) Themes and expanded settings that you say come with CM are not available on NOVA 8 ?
Off-topic: Love your signature pic. Made myself one too, whenever I'll be able to add it to my signature I will. Can't edit my signature now, for reasons i do not fully grasp.
Click to expand...
Click to collapse
1. Don't ask for ETA, i don't know dude. Also don't start a thread about it. When the update comes you can upgrade it.
2. Because CM7 is a custom gingerbread build by Team Cyanogen, not based from stock rom. So they can add new features that ordinary rom doesn't have. Try it, nightly #20 and Nova kernel 11c. If you don't like it just flash Nova Rom 8 again.
Sent from my LG-P970 using Tapatalk
Cool beans. Thanks a lot Also, I think you misunderstood me there, I wasn't asking WHEN the update will be here, just IF I can upgrade to it if I have another ROM/Kernel on my OB.
PinkPantherRO said:
Cool beans. Thanks a lot Also, I think you misunderstood me there, I wasn't asking WHEN the update will be here, just IF I can upgrade to it if I have another ROM/Kernel on my OB.
Click to expand...
Click to collapse
Aye, AFAIK if you wanna upgrade to GB (when it's available of course),and you have flashed custom ROM, you should downgrade it to the stock/official so then you can get a notif from the LG Updater if the GB is available
CMIIW
Sent from my heart into yours
Basically, If i put the NOVA 8 on my phone now, whenever the GB update will be available i'll have to restore the stock 2.2 Froyo I have on it now, right ?
PinkPantherRO said:
Basically, If i put the NOVA 8 on my phone now, whenever the GB update will be available i'll have to restore the stock 2.2 Froyo I have on it now, right ?
Click to expand...
Click to collapse
That's it
Sent from my LG-P970 using XDA App
Bottom line:
-I'll try both NOVA 8 & CM7 nightly #20 w/ nova kernel 11c
-see which one I like best
-that's 'bout it
All good ?
Oh sorry, btw you're good to go. Backup your contacts and data first.
Sent from my LG-P970 using Tapatalk
Hey, another question about the replacement of ROMs. Is it wise to back-up my phone using Titanium so that more data than just the contacts and messages are saved ?
What I'm asking here is: does Titanium also back-up settings and preferences in apps ? Or the installed apps ? I have never used it before and can't really figure this one out by their description on the market...
PinkPantherRO said:
Hey, another question about the replacement of ROMs. Is it wise to back-up my phone using Titanium so that more data than just the contacts and messages are saved ?
What I'm asking here is: does Titanium also back-up settings and preferences in apps ? Or the installed apps ? I have never used it before and can't really figure this one out by their description on the market...
Click to expand...
Click to collapse
titanium backs up EVERYTHING. ur apps (stock+installed and their progress), settings and customizations. to sum it up, titanium backup will backup every single bit of ur phone as an image. hope i helped
But i not recommended you to use titanium backup, especially you are migrating to a different rom like CM7, titanium will mess up your OS. use appmonster to backup your apps to sdcard and manually export your contacts to sdcard, also you can backup your sms with go sms.
I suggest you to use nandroid backup if you wanna revert to your original state.
Sent from my LG-P970 using Tapatalk
Back-Up queries.........
A very good thread.....
I have installed over hundreds apps/games........ and I have flashed my ROMs over 20 times and still want to do it..he..he.. (everytime, I have to re-install every single app/game one by one.. tediously!?).
Please advise which is the best tool (Titanium back up/Nandroid.....) that after flashing rom (from Nova to CM7, from Nova to Stock......) I can restored the installed apps/games and that remain the configed of these apps/game...
"I suggest you to use nandroid backup if you wanna revert to your original state.": is this means it also revert the OS to original (ie.: if I up from NOVA 8 to CM7, after restore, it will go back to NOVA 8)?
"use appmonster to backup your apps to sdcard and manually export your contacts to sdcard, also you can backup your sms with go sms." Do I need to Restore every single apps/games after that or only 01 click to restore everything?
Great thanks.
dtdpul said:
A very good thread.....
I have installed over hundreds apps/games........ and I have flashed my ROMs over 20 times and still want to do it..he..he.. (everytime, I have to re-install every single app/game one by one.. tediously!?).
Please advise which is the best tool (Titanium back up/Nandroid.....) that after flashing rom (from Nova to CM7, from Nova to Stock......) I can restored the installed apps/games and that remain the configed of these apps/game...
"I suggest you to use nandroid backup if you wanna revert to your original state.": is this means it also revert the OS to original (ie.: if I up from NOVA 8 to CM7, after restore, it will go back to NOVA 8)?
"use appmonster to backup your apps to sdcard and manually export your contacts to sdcard, also you can backup your sms with go sms." Do I need to Restore every single apps/games after that or only 01 click to restore everything?
Great thanks.
Click to expand...
Click to collapse
Yeap nandroid is like creating system image, if you ever used norton ghost it's somekind like that. It backups everything from the rom.
Appmonster automatically backup every installed apps. It can do batch install also.
Sent from my LG-P970 using Tapatalk
Never used Norton Ghost. I've used Drive Image XML though which does the same thing, only better. I'm an IT tech
So basically, I'll just have to use:
- nandroid for creating a back-up to restore the phone to its original state, before flashing and upgrading;
- go sms for the SMSes;
- appmonster for back-uping the apps to the SD;
- manual (my own hands ) for exporting the contacts to the SD card.
Thanks for the tip !
Question: Couldn't the back-up of SMSes and contacts be done through the PC Suite ? Or will it mess up something because it won't recognize the phone anymore after flashing and replacing the stock ROM ?
Question #2: @lesp4paul - What do you mean by "titanium back-up will mes up your OS" ?
PinkPantherRO said:
Question: Couldn't the back-up of SMSes and contacts be done through the PC Suite ? Or will it mess up something because it won't recognize the phone anymore after flashing and replacing the stock ROM ?
Click to expand...
Click to collapse
I use SMS Backup+, and my sms will going to Gmail And the contact just sync with Google Contacts, never loose contact anymore..
Never used Norton Ghost. I've used Drive Image XML though which does the same thing, only better. I'm an IT tech
So basically, I'll just have to use:
- nandroid for creating a back-up to restore the phone to its original state, before flashing and upgrading;
- go sms for the SMSes;
- appmonster for back-uping the apps to the SD;
- manual (my own hands ) for exporting the contacts to the SD card.
Thanks for the tip !
Question: Couldn't the back-up of SMSes and contacts be done through the PC Suite ? Or will it mess up something because it won't recognize the phone anymore after flashing and replacing the stock ROM ?
Question #2: @lesp4paul - What do you mean by "titanium back-up will mes up your OS" ?
Click to expand...
Click to collapse
CM7 does't recognize PCSuite. But can be done in stock ROM, handy if you plan upgrading to stock ROM (Gingerbread) in the coming days.
Sent from my LG-P970 using xda premium
I don't even see the point in upgrading to the GB coming up in a few days...
I could just flash the 2.2 NOVA 8 now, then when that ICS ROM comes to XDA I'll upgrade to that.
LE: Sorry if this is becoming annoying, but will THIS KERNEL work with THIS ROM ?
Because in the Kernel thread, it says that it mustn't be flashed on NOVA... I am very confused :-??
PinkPantherRO said:
I don't even see the point in upgrading to the GB coming up in a few days...
I could just flash the 2.2 NOVA 8 now, then when that ICS ROM comes to XDA I'll upgrade to that.
LE: Sorry if this is becoming annoying, but will THIS KERNEL work with THIS ROM ?
Because in the Kernel thread, it says that it mustn't be flashed on NOVA... I am very confused :-??
Click to expand...
Click to collapse
Because quasar kernel already included in NOVA ROM ?
Dunno for sure man,it already been there when the first time i bought this OB
Sent from my heart into yours

[Q] P1000 CM9 : Cannot restore from TB

Ive been searching on how to restore my files back by using titanium backup after i change to the new CM9 ICS ROM.
Ive check at "[DEV][WiP][ROM] CyanogenMod 9! - [02/01/12]" thread and also at "[ROM][NIGHTLY-BUILDS][CM9]Bug-thread of Te4m/Kang-builds of CM9" thread about my problem. unfortunately i cant find one.
now im on the slim build ROM "slim_build_02162012" and kernel "slim_kernel_02152012" on my P1000 Galaxy Tab.
Everything runs OKAY except the know bugs and blablabla.
the question is, how im gonna restore my files by using my Titanium Backup Pro ?
I already select the apps that i want to restore by using 'Batch' mode, then when i run the 'restore missing apps with data', it appears as usual, running the restoration mode and then when it complete , the notification came out saying that the restoration is complete. but when i open the menu, the apps is not there.
this is not only happen by using this current ROM but also when im using earlier version of ICS build by humberos .
when im using ICS Alpha 2 and 3, it is running okay. same goes when im using the overcome 3 and 4 ROM.
anyone might explain and teach me how to rectify , err no, sort out this problem ?
thanks.
^longlivexda^
Hmmmm ... did you check this link ?
Errr. What should i look for?
rizarulaltiz said:
Errr. What should i look for?
Click to expand...
Click to collapse
It's a manual It gives information on how to restore when coming from different ROM, etc....
Cheers

[Q] Updating Cyanvivo 10.1

Hello, I am happily running Cyanvivo 10.1 (thanks developers!). I know there is an update due out soon, and this was my first time installing a custom rom. My question is, knowing that OTA isn't supported, when the update comes out will have have to wipe and re-flash, loosing everything, or is there an easier process saving my data? I looked around for the answer some but have not found it as of yet. Thanks!
sethjustseth said:
Hello, I am happily running Cyanvivo 10.1 (thanks developers!). I know there is an update due out soon, and this was my first time installing a custom rom. My question is, knowing that OTA isn't supported, when the update comes out will have have to wipe and re-flash, loosing everything, or is there an easier process saving my data? I looked around for the answer some but have not found it as of yet. Thanks!
Click to expand...
Click to collapse
The way I do it, I use SMS Backup&Restore and Titanium Backup. When I finish saving all my files, reboot into recovery, wipe everything but the SD card, and flash the ROM. When it boots up and setup is finished, then I just restore everything back using the apps listed previously.
Of course you can just dirty-flash if you're lazy but don't expect help if you run into problems. The only place where a dirty-flash should not be done is if:
1. You're switching ROM (ex. you are going from CyanVivo10.1 to SVHD v1.7.1)
2. It's the same ROM but it has a different base.
Latest pacman rom was awesome thou
Sent from my Incredible S using xda app-developers app
masterzman89 said:
Latest pacman rom was awesome thou
Sent from my Incredible S using xda app-developers app
Click to expand...
Click to collapse
yes it is. I wrote this post before I went to the development to see PACman
I recommend PACman ROM as well due to its immense number of features (CM+AOKP+AOSPA)(CyanogenMod, Android Open Kang Project, Parnaoid Android).
That is if you don't mind the occasional bug here and there.

[Q] Stuck with Ginerbread 2.3.6, Slowdown. Need Help

Hi Guys,
I am a Galaxy S user. My Galaxy S was bought in Finland and still running (basically stuck with) Ginerbread 2.3.6 (I9000xxJVU). The phone's hardware is just fine (except slow GPS) but it has become paninfully slow and sometime shutting down/restarting on it's own.
Is it a good idea to reset the existing GingerBread 2.3.6 or get a different ROM?
I am a total novice and have not tried any other ROMs on it. I did some research about the alternative ROMs but there are so many options it made me really confused.
Could you guys suggest any stable and fast option for my Galaxy S i9000?
Also, if you could guide how I could migrate to that particular ROM from present Gingerbread, it would be really helpful.
Thanks in advance for your support and for this great forum.
Cheers
SKT
No reply?!
Could anyone please help?
Hi,I'm not going to be much help as I'm a noob myself but I can say I had same stock laggy gt 19000 which through like u said a lot of confusion about rooting and ROMs researching XDA and YouTube you can do it my galaxy s is like a new phone so stick with it,one tip is always stick to you model and kernel version and write things down and I hope it goes as well as it did for me. Btw I used Odin 3.1 and clockwork to root and Flashed ROM with Cm 10.1 stable.
Sent from GT-19000 CM 10.1. stable
saiko7 said:
Hi Guys,
I am a Galaxy S user. My Galaxy S was bought in Finland and still running (basically stuck with) Ginerbread 2.3.6 (I9000xxJVU). The phone's hardware is just fine (except slow GPS) but it has become paninfully slow and sometime shutting down/restarting on it's own.
Is it a good idea to reset the existing GingerBread 2.3.6 or get a different ROM?
I am a total novice and have not tried any other ROMs on it. I did some research about the alternative ROMs but there are so many options it made me really confused.
Could you guys suggest any stable and fast option for my Galaxy S i9000?
Also, if you could guide how I could migrate to that particular ROM from present Gingerbread, it would be really helpful.
Thanks in advance for your support and for this great forum.
Cheers
SKT
Click to expand...
Click to collapse
if you want to stay to 2.3.6 you can just factory reset your phone
Try this
Shut your Android Galaxy S down (Power off) or remove Battery.
Now press Volume up, Home and Power together.
If the Samsung Symbol is coming up leave the Home Button.
Then there is a boot Menu
Volume Up and Down to Navigate , Home to select the chosen option. ( factory reset )
---------------
if you want to upgrade to ICS or JB rom
root your firmware , choose the right cf-root from this thread
http://forum.xda-developers.com/showthread.php?t=788108
download ICS rom ( i suggest this one )
http://forum.xda-developers.com/showthread.php?t=1687727
install it via recovery
if you want to upgrade to JB
go to development section , chose any custom rom you want
and install via recovery
push thanks :good: if i helped you
The Tox said:
if you want to stay to 2.3.6 you can just factory reset your phone
Try this
Shut your Android Galaxy S down (Power off) or remove Battery.
Now press Volume up, Home and Power together.
If the Samsung Symbol is coming up leave the Home Button.
Then there is a boot Menu
Volume Up and Down to Navigate , Home to select the chosen option. ( factory reset )
---------------
if you want to upgrade to ICS or JB rom
root your firmware , choose the right cf-root from this thread
http://forum.xda-developers.com/showthread.php?t=788108
download ICS rom ( i suggest this one )
http://forum.xda-developers.com/showthread.php?t=1687727
install it via recovery
if you want to upgrade to JB
go to development section , chose any custom rom you want
and install via recovery
push thanks :good: if i helped you
Click to expand...
Click to collapse
Thank you mistrp74 and The Tox for the help.
I am still a bit confused, I cant seem to locate the right cf-root [Ginerbread 2.3.6 (I9000xxJVU)] from the thread you mentioned.
One more thing, how is your experience of running the Custom Roms, is it much better than the Samsung Firmware? Does all the function work fine?
I will need a bit of spoon feeding in the beginning for the update... as I have never tried it before and I am scared of bricking my phone.
So, please don't give up on me
saiko7 said:
Thank you mistrp74 and The Tox for the help.
I am still a bit confused, I cant seem to locate the right cf-root [Ginerbread 2.3.6 (I9000xxJVU)] from the thread you mentioned.
One more thing, how is your experience of running the Custom Roms, is it much better than the Samsung Firmware? Does all the function work fine?
I will need a bit of spoon feeding in the beginning for the update... as I have never tried it before and I am scared of bricking my phone.
So, please don't give up on me
Click to expand...
Click to collapse
The right CF-Root is in the seond to last post on the first page I believe- if you can fnd the one for XXJW4, the one you need is right above it
Custom ICS/JB roms are definitely smoother in many ways, although bear in mind because stock Jelly Bean don't include them, both FM Radio and 3G video calling won't work by default (two features of stock roms, I guess AllShare is another if you use it like me). Otherwise every other function is stable and rock solid. Except for the CM10.2 builds, which are still in an initial stage, the JB roms here should have everything working fine.
Sent from my GT-P7510
Thanks a lot guys!
I finally managed to do it.
I installed the CF-Root without any problem but RemICS-UX v1.3.1 (Team Remics) didn't load. It was stuck at the boot screen.
I thought I bricked my phone... but then I installed Ginerbread 2.3.6 (I9000xxJVU) using Odin and then installed plain vanilla ICS 4.0.3
Coming from Ginerbread 2.3.6 I find a lot of new things and the phone is also snappy and responsive... my old Galaxy S is acting almost like a new phone! So I am really happy.
Now that I am familiar with the process I am confident to tryout other ROMs...
I would like something simple, lightweight and fully-functional/bug-free.
So please let me know if there is any other better ROM I should try.
Thanks again guys!
saiko7 said:
Thanks a lot guys!
I finally managed to do it.
I installed the CF-Root without any problem but RemICS-UX v1.3.1 (Team Remics) didn't load. It was stuck at the boot screen.
I thought I bricked my phone... but then I installed Ginerbread 2.3.6 (I9000xxJVU) using Odin and then installed plain vanilla ICS 4.0.3
Coming from Ginerbread 2.3.6 I find a lot of new things and the phone is also snappy and responsive... my old Galaxy S is acting almost like a new phone! So I am really happy.
Now that I am familiar with the process I am confident to tryout other ROMs...
I would like something simple, lightweight and fully-functional/bug-free.
So please let me know if there is any other better ROM I should try.
Thanks again guys!
Click to expand...
Click to collapse
Go to development section and browse thread and read members feedback , and give a try for each rom until you find your best rom
The Tox said:
Go to development section and browse thread and read members feedback , and give a try for each rom until you find your best rom
Click to expand...
Click to collapse
Thanks!
Just one more question, what's your backup strategy that you guys use?
Or else it a lot of work to update each and every app... one by one... also what about the SMS, call log etc?
saiko7 said:
Thanks!
Just one more question, what's your backup strategy that you guys use?
Or else it a lot of work to update each and every app... one by one... also what about the SMS, call log etc?
Click to expand...
Click to collapse
Because I'm a person who 1.) doesn't use too many apps and 2.) tries to be as economical as possible, I don't have a large amount to backup. My contacts and calendar are always through Google, and for SMS I use SMS Backup and Restore on Play Store. Call log I don't keep, because I'm not a person who really cares for call logs. I only have one other app, Colornote, and that's cloud-synced as well.
Everything else I need is in internal storage :3
Sent from my GT-P7510
saiko7 said:
Thanks!
Just one more question, what's your backup strategy that you guys use?
Or else it a lot of work to update each and every app... one by one... also what about the SMS, call log etc?
Click to expand...
Click to collapse
I use G CLOUD BACKUP just for Sms and system settings
Sent from my GT-I9000 using xda app-developers app
More or less similar situation as TS
Hey guys,
Im in a more or less similar situation as the topic starter. My Samsung Galaxy S GT-I9000 has gotten slow and unresponsive with time.
I would like to update to a custom ROM, and got a little curious about the Slim Bean. But I feel a little unsure about how to proceed.
I'm currently running a custom Gingerbread 2.3.3 ROM, my device is rooted. I flashed this ROM from the Froyo that came with the phone about 2 years ago. It's been so long since I flashed this, I need some directions, as Im afraid I will brick my device.
When I go to recovery mode I see it runs ClockworkMod Recovery v2.5.1.3 - Voodoo lagfix.
Can I just put a Slim Bean 4.2 android version on my internal sd card and run "install zip from sdcard" in ClockwordMod? I would prefer to flash the latest stable version of Slim Bean, which would that be 4.2.2.build7-OFFICIAL?'
Any help would be greatly appreciated,
Bootism
Best way to update from gb or even older to jb is imo the way over cyanogenmod.
Follow this tutorial for 10.1: http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
And then you can upgrade via cwm to the very good slim bean.
Sent from my GT-I9000 using xda app-developers app
Thanks for the answer!
I recall reading about lots of issues with the lagfix and flashing ROMs. My file storage system is in ext4 instead of standard rfs, I think I should somehow undo this if I recall correct. Is this true?
Do you have an option to unlagfix in recovery?
Sent from my GT-P3110 using xda app-developers app
Yeah, I can choose "voodoo lagfix" in recovery.
It has the following options:
- disable lagfix
- enable lagfix (default)
- /system lagfix on (default)
- /system lagfix off
- debug off (default)
- debug on
Enter disable lagfix and reboot
Sent from my GT-I9000 using xda app-developers app
Ok, so I got Cyanogenmod 10.1.0 running! so far so good
Good job. Now you can flash a zip in cwm.
Sent from my GT-I9000 using xda app-developers app
Yeah, it's a whole new world opening up. Old phone runs relatively smooth, at least way better than before thanks for helping. I will stay on this Cyanogenmod for a bit and explore. Can I just flash in any of the ROMs as .zip in CWM later? I will look for a lightweight ROM for my old phone, any suggestions?

[Q&A] [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-2]

Q&A for [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-2]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-2]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
saeed_sofi said:
can this rom be installed on gt-s5570i?
Click to expand...
Click to collapse
hello is there made any kitkat firmware for galaxy mini without any bugs I mean is there any firmware for daily use?
Any way to back to stock rom by CMW?
Or another solution? I have problem with video codecs, every video player crash.
my android version 4.1.1. how to update into 4.4.4? i have been try to update trough recovery mode, install zip from sdcard, but its failed. i can't update cwm too,,, helpme please,,,,
Few CM 11 questions
Hello, I've used my Galaxy Mini for more than 4 years, but I hadn't known, that it could run also another OS than the default one pre-installed by Samsung. But suddenly, I've found CM and this forum about it. I've made some research, but because I'm beginner with CM, I have few questions:
1. In the description on the thread for the CM 11 for Galaxy Mini there is written, that the development is currently in the testing/alpha2 state. There is also a wishlist of missing features. But the there is also written, that the last update was in January, 2014. If I compare it to Androidarmv6 download archive and its GitHub repository, is seems there already are newer versions out. My first question is, if the most recent version of CM 11 for Galaxy Mini is more stable than that 1 year old alpha2 release? Which missing features from that wishlist have been already resolved?
2. And if the CM 11 version is not stable enough for everyday use, which older (but still based on Android 4.x) and more stable CM version would you recommend me to use instead (if any - otherwise I'll install official CM 7.2)?
3. I noticed, that there is already the official alpha release of CM 12 (based on Android 5.x) and also ported as a new branch on GitHub. I also know, that Android 5.x is really hardware-demanding. Will it be still possible to run CM 12 on Galaxy Mini phone? And what about CM 11 or 10? Could you recommend me the most stable and the newest one (see 2nd question), but still working on so low-performance device as Galaxy Mini in default is (384 MB RAM, 600 MHz, ...)? And if not, could you recommend me some web article describing how to make the performance of my phone better in order to run that recommended CM version from my previous two questions (if it is possible somehow)?
4. And finally, I want to ask, if I need to root my device before installation of that recommended CM version. Because in the installation manual from the original Samsung firmware to the official CM 7.2 there is no need to root Galaxy Mini during process and in the installation manual from CM 7.2 to CM 11 too. But in the installation manual from the original Samsung firmware directly to the CM 11 there is rooted phone needed. I don't understand, why I don't need rooted phone for indirect installation, but for direct installation I do. Could you clarify me the installation process?
I hope somebody experienced helps the beginner there (but good programmer and advanced Linux user) with the installation of CM by answering these a little bit complicated questions
aleskva said:
Hello, I've used my Galaxy Mini for more than 4 years, but I hadn't known, that it could run also another OS than the default one pre-installed by Samsung. But suddenly, I've found CM and this forum about it. I've made some research, but because I'm beginner with CM, I have few questions:
1. In the description on the thread for the CM 11 for Galaxy Mini there is written, that the development is currently in the testing/alpha2 state. There is also a wishlist of missing features. But the there is also written, that the last update was in January, 2014. If I compare it to Androidarmv6 download archive and its GitHub repository, is seems there already are newer versions out. My first question is, if the most recent version of CM 11 for Galaxy Mini is more stable than that 1 year old alpha2 release? Which missing features from that wishlist have been already resolved?
2. And if the CM 11 version is not stable enough for everyday use, which older (but still based on Android 4.x) and more stable CM version would you recommend me to use instead (if any - otherwise I'll install official CM 7.2)?
3. I noticed, that there is already the official alpha release of CM 12 (based on Android 5.x) and also ported as a new branch on GitHub. I also know, that Android 5.x is really hardware-demanding. Will it be still possible to run CM 12 on Galaxy Mini phone? And what about CM 11 or 10? Could you recommend me the most stable and the newest one (see 2nd question), but still working on so low-performance device as Galaxy Mini in default is (384 MB RAM, 600 MHz, ...)? And if not, could you recommend me some web article describing how to make the performance of my phone better in order to run that recommended CM version from my previous two questions (if it is possible somehow)?
4. And finally, I want to ask, if I need to root my device before installation of that recommended CM version. Because in the installation manual from the original Samsung firmware to the official CM 7.2 there is no need to root Galaxy Mini during process and in the installation manual from CM 7.2 to CM 11 too. But in the installation manual from the original Samsung firmware directly to the CM 11 there is rooted phone needed. I don't understand, why I don't need rooted phone for indirect installation, but for direct installation I do. Could you clarify me the installation process?
I hope somebody experienced helps the beginner there (but good programmer and advanced Linux user) with the installation of CM by answering these a little bit complicated questions
Click to expand...
Click to collapse
Are you sure your device is galaxy mini/pop s5570? There is no "i" at end? If both yes, then go ahead and read my answers.
Answers:
1. The op(member of androidarmv6 group) isn't active. Thats why the thread says alpha. But you can download and install latest tass(galaxy mini) version from androidarmv6 jenkins. And about feature list, everything is fixed from that list, but camera is colorless(black and white type pics). You need tls enabled recovery to flash latest cm11.
2. Cm11 is stable enough for daily usage. But cm11 is resource hungry. I would recommend you to try cm11 and make your own decision about it. Every android version <= 4.2.2 are fully stable and everything works. I use aokp 4.1.2 myself. 4.2.2 is a bit heavy but if you don't use too many apps, you could use it without any problems. Cm9, ics aosp, cm10,slimbean,aokp jb4.1.2 roms are most efficient 4.x roms and less resource hungry. For better results and good performance, you may need to install greenify. See my threads for 4.x roms.
3. Cm12 isn't booting yet. You can follow review.androidarmv6.org for latest changes and progress. Better use aokp 4.1.2 or slimbean or cm10 with greenify and int2ext(to expand internal memory, you need to create 512mb ext4 partition on sdcard).
4. It is not that hard to flash a simple zip. There is a thread here in galaxy mini section which describes how to root galaxy mini. Follow that tutorial. Then flash cwm 5.0.2.8 recovery(search in and download from galaxy mini section) it from stock rom recovery.
Then you are ready to install any galaxy mini roms.
Caution: Don't flash any zips outside galaxy mini section. Our device board name is "tass". So, you'll see tass in filenames and they are for galaxy mini/pop s5570. If you flash wrong zips, you'll end up with bricked phones(a paper weight). So, be careful. Have a happy flashing.
Sent from my GT-S5570 using XDA Free mobile app
Thank you! And one more question below
Venkatesh said:
Are you sure your device is galaxy mini/pop s5570? There is no "i" at end? If both yes, then go ahead and read my answers.
Caution: Don't flash any zips outside galaxy mini section. Our device board name is "tass". So, you'll see tass in filenames and they are for galaxy mini/pop s5570. If you flash wrong zips, you'll end up with bricked phones(a paper weight). So, be careful.
Click to expand...
Click to collapse
Sure! Just S5570 without "i" and just Tass! I know it is older mobile phone, but still I don't want little unusable brick
Venkatesh said:
But you can download and install latest tass(galaxy mini) version from androidarmv6 jenkins. And about feature list, everything is fixed from that list, but camera is colorless(black and white type pics). You need tls enabled recovery to flash latest cm11.
Click to expand...
Click to collapse
Is jenkins the download.androidarmv6.com site? Or jenkins.androidarmv6.com? But on the second site I don't see download link, even if I login with my GitHub account. And what is tls enabled recovery? Does it mean using CWM recovery? Or am I wrong?
Venkatesh said:
I would recommend you to try cm11 and make your own decision about it.
Click to expand...
Click to collapse
I'll try and I'll see
Venkatesh said:
There is a thread here in galaxy mini section which describes how to root galaxy mini. Follow that tutorial.
Click to expand...
Click to collapse
So I need to root my phone before. I wasn't sure, but now I understand clearly.
Venkatesh said:
Have a happy flashing.
Click to expand...
Click to collapse
Thank you for your answers to my questions! Actually many thanks!
And finally one more question:
I've seen more threads about Galaxy Mini roms in this xda section. And in almost all of them is written, that everything works, just there are problems using camera. It looks like this is a global problem. Is this problem only in CM 11 at the moment and group members only aren't active to cross the camera out from the "Don't work" list on threads for roms, which were resolved? Or is it still global problem? In which roms camera fully work without any caveat? You wrote, that everything in Galaxy Mini section <=4.2.2 is fully stable, so I expect it works there, but better to ask...
aleskva said:
Sure! Just S5570 without "i" and just Tass! I know it is older mobile phone, but still I don't want little unusable brick
Is jenkins the download.androidarmv6.com site? Or jenkins.androidarmv6.com? But on the second site I don't see download link, even if I login with my GitHub account. And what is tls enabled recovery? Does it mean using CWM recovery? Or am I wrong?
I'll try and I'll see
So I need to root my phone before. I wasn't sure, but now I understand clearly.
Thank you for your answers to my questions! Actually many thanks!
And finally one more question:
I've seen more threads about Galaxy Mini roms in this xda section. And in almost all of them is written, that everything works, just there are problems using camera. It looks like this is a global problem. Is this problem only in CM 11 at the moment and group members only aren't active to cross the camera out from the "Don't work" list on threads for roms, which were resolved? Or is it still global problem? In which roms camera fully work without any caveat? You wrote, that everything in Galaxy Mini section <=4.2.2 is fully stable, so I expect it works there, but better to ask...
Click to expand...
Click to collapse
Search androidarmv6 jenkins in google.
Camera in cm11 actually works but it uses source built libcamera, not the original samsung libcamera. And it gives a very colorless pics. No, androidarmv6 people are very nice. Just they are busy. And we don't have a skillful developer left.
And yes, every version <= 4.2.2 has got everything working as it should. But the video recording isn't good sometimes(only sometimes, it is not good anyways).
I would recommend you to try my aokp 4.1.2. Partition your sd card, install cronmod int2ext to expand ur internal memory (int2ext only not int2ext+). And install xposed installer + greenify, greenify not so important and ram consuming apps. That's my setup actually.
Good night
Sent from my GT-S5570 using XDA Free mobile app
Venkatesh said:
Search androidarmv6 jenkins in google.
Camera in cm11 actually works but it uses source built libcamera, not the original samsung libcamera. And it gives a very colorless pics. No, androidarmv6 people are very nice. Just they are busy. And we don't have a skillful developer left.
And yes, every version <= 4.2.2 has got everything working as it should. But the video recording isn't good sometimes(only sometimes, it is not good anyways).
I would recommend you to try my aokp 4.1.2. Partition your sd card, install cronmod int2ext to expand ur internal memory (int2ext only not int2ext+). And install xposed installer + greenify, greenify not so important and ram consuming apps. That's my setup actually.
Good night
Sent from my GT-S5570 using XDA Free mobile app
Click to expand...
Click to collapse
Okay, I'll try next week and we'll see
well done
My experiences and impressions
Venkatesh said:
Search androidarmv6 jenkins in google.
Camera in cm11 actually works but it uses source built libcamera, not the original samsung libcamera. And it gives a very colorless pics. No, androidarmv6 people are very nice. Just they are busy. And we don't have a skillful developer left.
And yes, every version <= 4.2.2 has got everything working as it should. But the video recording isn't good sometimes(only sometimes, it is not good anyways).
I would recommend you to try my aokp 4.1.2. Partition your sd card, install cronmod int2ext to expand ur internal memory (int2ext only not int2ext+). And install xposed installer + greenify, greenify not so important and ram consuming apps. That's my setup actually.
Good night
Sent from my GT-S5570 using XDA Free mobile app
Click to expand...
Click to collapse
I haven't time before, so today I managed to install a new ROM to my Mini six months after I wrote here. First of all I spent hours of googling and searching, where to download working package to root my phone and where to download cwm 5.0.2.8 for Mini, because all of the packages for rooting haven't been working at all and all of the download links to cwm 5.0.2.8 I've found were dead, except the links and except the packages here. Googling and searching finally helped, so I had my first cwm on my Mini. Then I've checked first three ROMs from the Mini's section. Concretely CM 10, SB 3.1.0 and AOKP JB 4.1.2.
First of all I've tried Slimbean. I was really confused, when I found out, that there is no keyboard inside the installation! What the h*** (sorry, but I really said that when at that moment)? One of my reasons to leave original Gingerbread was that really bad keyboard, which I need to reinstall by some from Google Play every time I had to reset my phone into factory settings (another reason to upgrade btw). And after upgrade again? But Slimbean looked really well, just a few strings weren't translated to my language, so I decided to try AOKP. AOKP hadn't just keyboard, but also gapps, so I needed to google, where to download it from. I've found this and hoped it can't break my newly installed ROM. And there were more strings untranslated to my language, so I decided to try the third one, CM. It was fully translated, but also there weren't gapps and keyboard. And the patch (if it was a patch) - tether patches.zip - couldn't be applied (some error was thrown during its installation).
Finally, I've found gapps for it too. The winner of these three was Slimbean, the loser was AOKP, but I'm going to test more ROMs, until I find some good one. In order to avoid searching the Mini's section another hours: Is there any ROM with preinstalled keyboard (and possibly gapps too)?
aleskva said:
I haven't time before, so today I managed to install a new ROM to my Mini six months after I wrote here. First of all I spent hours of googling and searching, where to download working package to root my phone and where to download cwm 5.0.2.8 for Mini, because all of the packages for rooting haven't been working at all and all of the download links to cwm 5.0.2.8 I've found were dead, except the links and except the packages here. Googling and searching finally helped, so I had my first cwm on my Mini. Then I've checked first three ROMs from the Mini's section. Concretely CM 10, SB 3.1.0 and AOKP JB 4.1.2.
First of all I've tried Slimbean. I was really confused, when I found out, that there is no keyboard inside the installation! What the h*** (sorry, but I really said that when at that moment)? One of my reasons to leave original Gingerbread was that really bad keyboard, which I need to reinstall by some from Google Play every time I had to reset my phone into factory settings (another reason to upgrade btw). And after upgrade again? But Slimbean looked really well, just a few strings weren't translated to my language, so I decided to try AOKP. AOKP hadn't just keyboard, but also gapps, so I needed to google, where to download it from. I've found this and hoped it can't break my newly installed ROM. And there were more strings untranslated to my language, so I decided to try the third one, CM. It was fully translated, but also there weren't gapps and keyboard. And the patch (if it was a patch) - tether patches.zip - couldn't be applied (some error was thrown during its installation).
Finally, I've found gapps for it too. The winner of these three was Slimbean, the loser was AOKP, but I'm going to test more ROMs, until I find some good one. In order to avoid searching the Mini's section another hours: Is there any ROM with preinstalled keyboard (and possibly gapps too)?
Click to expand...
Click to collapse
I've removed keyboard and gapps intensionally. I use this keyboard. If you really want jb keyboard i'll provide you later(is not better than gb keyboard though). Yourzgapps are best. Google search yourzgapps.
Venkatesh said:
I've removed keyboard and gapps intensionally. I use this keyboard. If you really want jb keyboard i'll provide you later(is not better than gb keyboard though). Yourzgapps are best. Google search yourzgapps.
Click to expand...
Click to collapse
I used this one. Its dev developed JB keyboard too, but it wasn't compatible with GB anymore. Is there any package for this or JB one or I need to install them from Google Play?
I found out that AOKP just needed to restart to be fully translated, so it is a little bit ok than CM (but SB still wins).
I'd like to try some 4.0 ROMs and some 4.2 ROMs (just to try, like yesterday). I saw here some threads about english only ROMs. I'll try them and maybe find my favourite. Is there any chance to build my language version after that? I know there is big red notification This is english only! (You have been warned...!). I don't want to waste your time for so minor things. Feel free to reject my potential request at the beginning.
aleskva said:
I used this one. Its dev developed JB keyboard too, but it wasn't compatible with GB anymore. Is there any package for this or JB one or I need to install them from Google Play?
I found out that AOKP just needed to restart to be fully translated, so it is a little bit ok than CM (but SB still wins).
I'd like to try some 4.0 ROMs and some 4.2 ROMs (just to try, like yesterday). I saw here some threads about english only ROMs. I'll try them and maybe find my favourite. Is there any chance to build my language version after that? I know there is big red notification This is english only! (You have been warned...!). I don't want to waste your time for so minor things. Feel free to reject my potential request at the beginning.
Click to expand...
Click to collapse
You can add your language translations to apks inside the rom. ics,jb keyboards won't work on gb. There is a cm10.1 version from androidarmv6 team, try it. It has all languages. To build only your language, then you need to sync sources and modify build files to get your language.
Venkatesh said:
You can add your language translations to apks inside the rom. ics,jb keyboards won't work on gb. There is a cm10.1 version from androidarmv6 team, try it. It has all languages. To build only your language, then you need to sync sources and modify build files to get your language.
Click to expand...
Click to collapse
Thank you, I'll search the CM 10.1 from androidarmv6 team and try it. The keyboard looks like ICS, but worked fine in factory firmware GB. I think it could work in this CM 10.1 too. If I install it from Google Play to the CM 10.1 ROM, it will work, or not? But I don't know, how to change the apk into the zip, that can be installed from cwm.
Thank you for your all help. Six months ago I thought it will be so complicated, but it is easy if one follows the rules not to make a bricked phone.
Edit: I tried this and it is totally awesome. The best I've tried. I'll test it for a longer period. My favourite keyboard is inside, first time in my Mini's life I don't have to reinstall that bad original GB keyboard. I just hope it won't be so battery and RAM consuming (I'll test it). I ask here if I have some question or problem in the future. Last time huge thanks (in words and in thank buttons too)
aleskva said:
Thank you, I'll search the CM 10.1 from androidarmv6 team and try it. The keyboard looks like ICS, but worked fine in factory firmware GB. I think it could work in this CM 10.1 too. If I install it from Google Play to the CM 10.1 ROM, it will work, or not? But I don't know, how to change the apk into the zip, that can be installed from cwm.
Thank you for your all help. Six months ago I thought it will be so complicated, but it is easy if one follows the rules not to make a bricked phone.
Edit: I tried this and it is totally awesome. The best I've tried. I'll test it for a longer period. My favourite keyboard is inside, first time in my Mini's life I don't have to reinstall that bad original GB keyboard. I just hope it won't be so battery and RAM consuming (I'll test it). I ask here if I have some question or problem in the future. Last time huge thanks (in words and in thank buttons too)
Click to expand...
Click to collapse
try cm10.1 rom from here.
Venkatesh said:
try cm10.1 rom from here.
Click to expand...
Click to collapse
I tried it, the performance is better, but there is a huge problem. I install it in this way:
boot into cwm 5.0.2.8 >
wipe data, cache, dalvik cache, battery stats >
flash cm10.1 you suggested >
flash yourzgapps >
flash int2ext >
fotmat sd-ext >
reboot
After reboot cm10.1 boots and at the beginning works like a charm. Int2ext works as expected, 1/5 from memory used. But after 2-3 minutes int2ext stops working and I have full memory. Reboot or int2ext reinstallation don't work. Why? How could I fix it?
aleskva said:
I tried it, the performance is better, but there is a huge problem. I install it in this way:
boot into cwm 5.0.2.8 >
wipe data, cache, dalvik cache, battery stats >
flash cm10.1 you suggested >
flash yourzgapps >
flash int2ext >
fotmat sd-ext >
reboot
After reboot cm10.1 boots and at the beginning works like a charm. Int2ext works as expected, 1/5 from memory used. But after 2-3 minutes int2ext stops working and I have full memory. Reboot or int2ext reinstallation don't work. Why? How could I fix it?
Click to expand...
Click to collapse
Don't format sd-ext after flashing int2ext. One factory reset is enough.
Try this way:
1. Goto recovery and make factory reset/wipe.
2. Flash rom and reboot system(let it boot first).
3. Again goto recovery, mount all partitions and flash int2ext.
4. You can also flash gapps now. Reboot system now, and start your setup.
Venkatesh said:
Don't format sd-ext after flashing int2ext. One factory reset is enough.
Try this way:
1. Goto recovery and make factory reset/wipe.
2. Flash rom and reboot system(let it boot first).
3. Again goto recovery, mount all partitions and flash int2ext.
4. You can also flash gapps now. Reboot system now, and start your setup.
Click to expand...
Click to collapse
I had formatted sd-ext, because it is written in int2ext installation steps. Finally I tried your suggestion and everything works. I just flashed gapps right after flashing OS, because I want Google's first boot guide. I'm so happy everything works like a charm on that older, but good Mini. I'm also happy I got rid of that buggy GB. Once more thanks.
Err

Categories

Resources