Database Develop

HD7 Half brick fix with goldcard

Hi, i have an half bricked HD7 and i'm trying to fix it with goldcard since i read this thread http://forum.xda-developers.com/showthread.php?t=1417761
I followed this guide http://forum.xda-developers.com/showthread.php?t=893152
I have the CID, i have the goldcard.img, i have a good rom and i copyed it to my 1GB SD card after i renamed it to SCHUIMG.nbh. Now i don't fully understand what i have to do.
At this point on the guide:
4-connect usb cable except the one for the wp7
boot your device into usb host mode(volume down + camera on Trophy)
and connect the last usb cable.
the screen of your wp7 look like this if all work.
This point is not clear to me, may someone explain better what i have to do and what should happen?
I have an Y-cable and a female-female adaptor. Please tell me what to do.
Thanks for your answers.

Google is your best friend.check this link out. http://forum.xda-developers.com/showpost.php?p=10187622&postcount=1

Oh, really? Thanks a lot.
Did you read my question? I already checked that guide, and I don't understand the 4th point.

manuel92 said:
Hi, i have an half bricked HD7 and i'm trying to fix it with goldcard since i read this thread http://forum.xda-developers.com/showthread.php?t=1417761
I followed this guide http://forum.xda-developers.com/showthread.php?t=893152
I have the CID, i have the goldcard.img, i have a good rom and i copyed it to my 1GB SD card after i renamed it to SCHUIMG.nbh. Now i don't fully understand what i have to do.
At this point on the guide:
4-connect usb cable except the one for the wp7
boot your device into usb host mode(volume down + camera on Trophy)
and connect the last usb cable.
the screen of your wp7 look like this if all work.
This point is not clear to me, may someone explain better what i have to do and what should happen?
I have an Y-cable and a female-female adaptor. Please tell me what to do.
Thanks for your answers.
Click to expand...
Click to collapse
connect all the cables, except the phone (micro USB on the bottom of the phone)
press and hold volume down button with the camera button, then press the power button, the phone should turn on with a grey screen and blue text in the middle that says "Enter USB Host Mode" or something like that..
connect your phone to usb
your screen should look like the photo attached in that thread

Ok, i did everything as you said, and my phone was in "Enter USB host mode". After i connect it to USB it changes to "Loading..." and remains stuck there forever. I also tried with different card readers and different micro SD (always 1 GB or lower), same results.
Notice that my card readers don't have a flashing light so i don't know wether they are working or not. I assume they are working because the screen changes in "Loading" but for some reason it gets stuck in there.
Maybe I should change rom? I'm using a NoDo rom i found on an italian blog since i can't download the ones the xda forum provides, i always get the error "server is busy" or something like that.
Do you have any suggestion? I'm using this rom anyway:
ht tp:// uplo aded .to/file /dud fva8j
(remove spaces)
Edit: the rom i'm using is not a custom rom of course, it's the original NoDo.

manuel92 said:
Ok, i did everything as you said, and my phone was in "Enter USB host mode". After i connect it to USB it changes to "Loading..." and remains stuck there forever. I also tried with different card readers and different micro SD (always 1 GB or lower), same results.
Notice that my card readers don't have a flashing light so i don't know wether they are working or not. I assume they are working because the screen changes in "Loading" but for some reason it gets stuck in there.
Maybe I should change rom? I'm using a NoDo rom i found on an italian blog since i can't download the ones the xda forum provides, i always get the error "server is busy" or something like that.
Do you have any suggestion? I'm using this rom anyway:
ht tp:// uplo aded .to/file /dud fva8j
(remove spaces)
Edit: the rom i'm using is not a custom rom of course, it's the original NoDo.
Click to expand...
Click to collapse
hmm, are you sure the ROM you're using is the one for your phone, you know, if your phone is T-Mobile, you have to download tmobile rom... etc
and maybe there isn't enough power for the phone and the reader, try using your wall charger not your computer/laptop
and try asking a friend to download you the roms from xda, especially if you know someone with different ISP
hope it works

hmm, are you sure the ROM you're using is the one for your phone, you know, if your phone is T-Mobile, you have to download tmobile rom... etc
and maybe there isn't enough power for the phone and the reader, try using your wall charger not your computer/laptop
and try asking a friend to download you the roms from xda, especially if you know someone with different ISP
hope it works
Click to expand...
Click to collapse
I'm absolutely sure the rom is exactly for my phone, and i'm using a wall charger (i also tried with computer though).
I'll try to download the roms from xda in some way, can someone give me a link to a working one? I tried from this list but some links say the file has been removed, others just don't work because the file sharing site is close and so on.

manuel92 said:
I'm absolutely sure the rom is exactly for my phone, and i'm using a wall charger (i also tried with computer though).
I'll try to download the roms from xda in some way, can someone give me a link to a working one? I tried from this list but some links say the file has been removed, others just don't work because the file sharing site is close and so on.
Click to expand...
Click to collapse
The ones in the link are your only hope, hmm, try pre-nodo if nodo didn't download, or ask someone to upload the one you want.
oh, if you have a flash memory less than 1gb, it could give you better results.. no harm in try.
idk, sorry, but I think that's all I got :/

hi friend pls u solve u problem i have exatly same problem stuck in loading.......... and nothing happem
---------- Post added at 08:15 PM ---------- Previous post was at 07:53 PM ----------
waltercell said:
hi friend pls u solve u problem i have exatly same problem stuck in loading.......... and nothing happem
Click to expand...
Click to collapse
problem solve card reader change and work

waltercell said:
hi friend pls u solve u problem i have exatly same problem stuck in loading.......... and nothing happem
---------- Post added at 08:15 PM ---------- Previous post was at 07:53 PM ----------
problem solve card reader change and work
Click to expand...
Click to collapse
good to hear

[Q] A challenge for Captivate users!

Hey, im in Jamaica and ive got a challenge for Captivate users. No one has been able to figure this dilema out. Hopefully someone can solve this.
My captivates usb port has stopped doing anything. The details are:
1. The phone works fine and used to be rooted but the root is corrupt i think. Super user installed but the phone behaves unrooted and SU gives errors.
2. I cant flash ROMs since there is no usb.
3. Cannot sideload as the phone cant receive the AT&T OTA update since im in Jamaica.
4. I changed the USB port but same result (no charge, no connection to pc)
Im thinking the usb is bricked since the person i got it from says it charged the day before she reset the phone to give to me.
5. Cant update.zip via 3 recovery (i get e: siganture verification failed)
Can anyone figure this out!? Im thinking its impossible now. If only i could use sideload wonder machine wirelessly, then i could use Z4ROOT or Visionary to flash.

Maybe stupid question. But do u have the Samsung USB drivers installed? If yes then probably need a new USB cord. Try a different one.

saintnova said:
Hey, im in Jamaica and ive got a challenge for Captivate users. No one has been able to figure this dilema out. Hopefully someone can solve this.
My captivates usb port has stopped doing anything. The details are:
1. The phone works fine and used to be rooted but the root is corrupt i think. Super user installed but the phone behaves unrooted and SU gives errors.
2. I cant flash ROMs since there is no usb.
3. Cannot sideload as the phone cant receive the AT&T OTA update since im in Jamaica.
4. I changed the USB port but same result (no charge, no connection to pc)
Im thinking the usb is bricked since the person i got it from says it charged the day before she reset the phone to give to me.
5. Cant update.zip via 3 recovery (i get e: siganture verification failed)
Can anyone figure this out!? Im thinking its impossible now. If only i could use sideload wonder machine wirelessly, then i could use Z4ROOT or Visionary to flash.
Click to expand...
Click to collapse
You went through this thread yet? http://forum.xda-developers.com/showthread.php?t=1953930

1. Ive tried several usb cables but no response.
2. If the phone wont even charge via usb then im not sure installing the drivers will help.
3. Whats the jig supposed to do? Get me into download? If so, when i hold the volume buttons and power button, it takes me to a screen that gives me the options to clear cache, user data, and reinstall packages. but when i try various update.zip files i get the signed verification failed message. I think this is recovery mode but ill search for how to get into download mode. Does download mode work without usb?
Tried entering download mode but i guess since the usb doesnt work, thats why it doesnt function.

saintnova said:
1. Ive tried several usb cables but no response.
2. If the phone wont even charge via usb then im not sure installing the drivers will help.
3. Whats the jig supposed to do? Get me into download? If so, when i hold the volume buttons and power button, it takes me to a screen that gives me the options to clear cache, user data, and reinstall packages. but when i try various update.zip files i get the signed verification failed message. I think this is recovery mode but ill search for how to get into download mode. Does download mode work without usb?
Tried entering download mode but i guess since the usb doesnt work, thats why it doesnt function.
Click to expand...
Click to collapse
If the phone doesn't charge through the usb, you need a new usb port on your phone. If you know how to solder, you can probably get one for cheap and look at videos on how to do it. Otherwise, you can go through mobiletechvideos.com to get it replaced.
As for download mode, it's vol down + power.

BWolf56 said:
If the phone doesn't charge through the usb, you need a new usb port on your phone. If you know how to solder, you can probably get one for cheap and look at videos on how to do it. Otherwise, you can go through mobiletechvideos.com to get it replaced.
As for download mode, it's vol down + power.
Click to expand...
Click to collapse
The usb port was changed but the result was the same. All this happened after the person wiped the phone before i got it. Before that the usb port worked fine. Trying to put it into download mode now but a question again is, will it work if the usb port doesnt work?
Tried volume down + power but phone just boots as normal.
Im on froyo 2.2

saintnova said:
The usb port was changed but the result was the same. All this happened after the person wiped the phone before i got it. Before that the usb port worked fine. Trying to put it into download mode now but a question again is, will it work if the usb port doesnt work?
Tried volume down + power but phone just boots as normal.
Im on froyo 2.2
Click to expand...
Click to collapse
The other way to fix this would be sideloading but ATT doesnt allow the OTA where im at. Anyway to upload Z4root quickly to googleplay then download it? LOL. My phone only allows apps from google play.

saintnova said:
The other way to fix this would be sideloading but ATT doesnt allow the OTA where im at. Anyway to upload Z4root quickly to googleplay then download it? LOL. My phone only allows apps from google play.
Click to expand...
Click to collapse
There's a security feature, you can uncheck it in your settings.
And holding vol down+power while phone is off will boot it in download mode (don't have the usb plugged in). Also, formatting and resetting a phone doesn't break usb. My guess, the job wasn't done correctly.
Have you tried it on other pc? Perhaps your pc usb port is defective.

BWolf56 said:
There's a security feature, you can uncheck it in your settings.
And holding vol down+power while phone is off will boot it in download mode (don't have the usb plugged in). Also, formatting and resetting a phone doesn't break usb. My guess, the job wasn't done correctly.
Have you tried it on other pc? Perhaps your pc usb port is defective.
Click to expand...
Click to collapse
1. There isnt any such setting on the ATT version of my captivate. I guess that option came after the sideload OTA update.
2. I hold the volume down button and the power when the phone is off but it just boots up as normal. No download mode. Is there a site that keeps update.zips or OTA update that can be pushed?

saintnova said:
1. There isnt any such setting on the ATT version of my captivate. I guess that option came after the sideload OTA update.
2. I hold the volume down button and the power when the phone is off but it just boots up as normal. No download mode. Is there a site that keeps update.zips or OTA update that can be pushed?
Click to expand...
Click to collapse
1. I though I remembered being able to sideload back then (it has been a while) but could be wrong.
2. Not with the signature verification. You'd need a custom recovery (cwm).
Getting in download mode is something that always works (unless you mess up with the bootloaders = bricked phone), just like getting in recovery. It's something that comes with the phone.
Basically, not much can be done on the Captivate without a working usb.

BWolf56 said:
1. I though I remembered being able to sideload back then (it has been a while) but could be wrong.
2. Not with the signature verification. You'd need a custom recovery (cwm).
Getting in download mode is something that always works (unless you mess up with the bootloaders = bricked phone), just like getting in recovery. It's something that comes with the phone.
Basically, not much can be done on the Captivate without a working usb.
Click to expand...
Click to collapse
Any other suggestions with the download mode? I can get into recovery 100% of the time but the vol down + power just turens on the phone. Anyway to get a rooting app from google play? or bypass apk block? Is there anyway to update from att over wifi? I can check for update on the phone but it just hangs there. Guess its cuz im not in the states. Respect though!! If u figure out anything else to try let me know. Bless!!

A way to sideload apps without USB is to download the Google Drive app from the Play Store then upload the APK from your computer to your Drive. Next access your Drive on your phone and select the APK it should begin the regular install.
**you will need to allow 3rd party applications**

guidostein said:
A way to sideload apps without USB is to download the Google Drive app from the Play Store then upload the APK from your computer to your Drive. Next access your Drive on your phone and select the APK it should begin the regular install.
**you will need to allow 3rd party applications**
Click to expand...
Click to collapse
Trying that now. What do i need to do to allow 3rd party apps? Will it just ask me?
Damn!! the third party thing is the same thing that blocks me from installing apps normally! Damn Google/ATT monopoly!!

saintnova said:
Trying that now. What do i need to do to allow 3rd party apps? Will it just ask me?
Click to expand...
Click to collapse
It should ask.
How to do it really depends on which OS you're running.

guidostein said:
It should ask.
How to do it really depends on which OS you're running.
Click to expand...
Click to collapse
Doesnt work, Third party blocked. Trying this but cant find this option http://androidforums.com/inspire-4g-tips-tricks/340745-unknown-sources-now-can-allowed.html

saintnova said:
Doesnt work, Third party blocked. Trying this but cant find this option
Click to expand...
Click to collapse
try going to Setting > Security > Enable Unknown Sources
thats where it is on my phone but im running a custom Rom
if that doesnt work try to find anything in the settings that says enable unknown sources.
---------- Post added at 04:09 PM ---------- Previous post was at 03:57 PM ----------
So I did some reading and if your running stock at&t ROM you most likely are not able to allow unknown sources (because for some reason AT&t blocks it).
You might want to try download an app called AppInstaller by FunTrigger from PlayStore (I have never used this and I'm not sure if it will get around the 3rd party problem you are having but its worth a shot)
You should be able to use it to install the APK in your Drive.
---------- Post added at 04:37 PM ---------- Previous post was at 04:09 PM ----------
Okay I think I've got it. Note that i have not tried this myself and take no responsibility if something goes wrong.
How to enable unknown sources on AT&T phone:
Settings > Applications > Manage Applications > All > select Customization Settings Provider and then Clear Data
Next go back one page and select Settings and then Clear Data
Now in Settings > Applications you should see the option unknown sources select it.
Now unknown sources are enabled!

guidostein said:
try going to Setting > Security > Enable Unknown Sources
thats where it is on my phone but im running a custom Rom
if that doesnt work try to find anything in the settings that says enable unknown sources.
---------- Post added at 04:09 PM ---------- Previous post was at 03:57 PM ----------
So I did some reading and if your running stock at&t ROM you most likely are not able to allow unknown sources (because for some reason AT&t blocks it).
You might want to try download an app called AppInstaller by FunTrigger from PlayStore (I have never used this and I'm not sure if it will get around the 3rd party problem you are having but its worth a shot)
You should be able to use it to install the APK in your Drive.
---------- Post added at 04:37 PM ---------- Previous post was at 04:09 PM ----------
Okay I think I've got it. Note that i have not tried this myself and take no responsibility if something goes wrong.
How to enable unknown sources on AT&T phone:
Settings > Applications > Manage Applications > All > select Customization Settings Provider and then Clear Data
Next go back one page and select Settings and then Clear Data
Now in Settings > Applications you should see the option unknown sources select it.
Now unknown sources are enabled!
Click to expand...
Click to collapse
And this my friend is why search is amazing :thumbup:
Sent from my SGH-I747 using xda app-developers app

BWolf56 said:
And this my friend is why search is amazing :thumbup:
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
This option does not appear in my list. Remember i told ya i was reading that hehehe. Dont know why it isnt there though. Sigh. Maybe putting the ATT chip back in will help although i dont think its still activated.

saintnova said:
This option does not appear in my list. Remember i told ya i was reading that hehehe. Dont know why it isnt there though. Sigh. Maybe putting the ATT chip back in will help although i dont think its still activated.
Click to expand...
Click to collapse
I don't know how set you are on keeping your data but why not try a complete factory reset?
And if that doesn't work then just flash a new CWM and ROM,,, there are ways to do that without connecting to a computer.

guidostein said:
I don't know how set you are on keeping your data but why not try a complete factory reset?
And if that doesn't work then just flash a new CWM and ROM,,, there are ways to do that without connecting to a computer.
Click to expand...
Click to collapse
He can't without a usb.. That's just how the captivate is from stock.

setting up a rooted chromecast

Hi
Purchased a rooted chromecast. and need some help in setting it up. Would plugging in and setting it up on my tv clear the root? There was a website link on XDA that could check the firmware but when I tried to navigate to that link it turned out to be invalid.
Any advice on setting up a rooted chromecast? Should I follow a different set of steps?
Thanks in advance

Hi dalkiel,
Does this boot with the Team Eureka Logo? (Or Pwncast if an old root).
If it does then you are free to set it up as needed, these roms remove the update logic so the device is safe to use as you would a normal device (set up, reset user data, etc).

Hi
Thanks for your reply i plugged it into the tv (samsung smart tv) and nothing popped up so i figured I need to start with the PC first. Downloaded the chromecast setup files and ran set up. It showed me a code and wanted to verify if thats what I saw n the tv? I didnt want to proceed further without clarifying in case i wipe out the root. There was no boot screen with Eureka or pwncast when plugged into the tv or PC.
Further advise would be appreciated. Thanks in advance.

dalkiel said:
Hi
Thanks for your reply i plugged it into the tv (samsung smart tv) and nothing popped up so i figured I need to start with the PC first. Downloaded the chromecast setup files and ran set up. It showed me a code and wanted to verify if thats what I saw n the tv? I didnt want to proceed further without clarifying in case i wipe out the root. There was no boot screen with Eureka or pwncast when plugged into the tv or PC.
Further advise would be appreciated. Thanks in advance.
Click to expand...
Click to collapse
You won't wipe out root...All you are really dong is setting up WiFi Access in a setup and changing the name of the device on the network.

dalkiel said:
There was no boot screen with Eureka or pwncast when plugged into the tv or PC.
Click to expand...
Click to collapse
You should see a Team Eureka logo on boot, but depending on your TV you might have to let it boot completely then reboot it again to see it (TV input detect sometimes takes too long to "lock on" to the input).

delete

Themes / Apps / Mods Samsung Quick Share 4 All (use it on non-Samsung PCs)

Important update 2022-04-26, click here to read​---
SamsungQuickShare4All​This tiny batch script makes Samsung Quick Share working on non-Samsung Windows PCs by spoofing a registry value that the program checks when opening.
Usage​Download the script here and just run it (it could ask for admin rights). You'll only need to run it once, after that it'll automatically launch itself after every startup/reboot.
How to download Quick Share​If you want the latest Store version go here, paste the store link of the app, click the checkmark, scroll down, download the one named SAMSUNGELECTRONICSCoLtd.SamsungQuickShare_xxxxxxxx_neutral_xxxxxxxxxxxxxxx.msixbundle (the only one that ends with .msixbundle), then open it and install it. You won't need to download every update like this, it'll automatically update from the Microsoft Store when there is a new version.
Remember that your phone's screen needs to be on and unlocked to be discoverable from your PC (unfortunately it's a limitation of Quick Share itself)!
Troubleshooting​All should work fine just by running the .bat file, but if you're having issues try applying DriverCheckBypass.reg (just run the file, then Yes and then Ok), especially if your PC doesn't have an Intel AX wireless adapter (e.g. Intel AC/Broadcom/Realtek/Marvell etc.).
Keep in mind that latest versions from the Store could contain patches to this method, so if you encounter any issue download this older version here.
Disclaimer​Keep in mind that Samsung could fix this any time. So, if it doesn't work, probably they have fixed it. However, as of 11/7/2021, I can confirm that it works perfectly (doesn't display the unsupported device error and file sharing works both sending and receiving), tested on Lenovo Yoga C940 with Intel AX201 wireless adapter (support for other adapters cannot be guaranteed). Also, I'm not responsible for any loss or damage.
Download​You can download it here!

obrobrio2000 said:
Samsung Quick Share 4 All​This tiny script makes Samsung Quick Share working on non-Samsung Windows PCs by spoofing a registry value that the program checks when opening. This repository includes:
a .bat Batch version of the script (run as admin);
a .ps1 PowerShell version of the script (run ad admin);
a .xml Task Scheduler task to make it launch at startup (check "run with highest privileges" when creating/importing the task). The task is configured to run the .bat version of the script, but you can change it to run the .ps1 one if you like.
Disclaimer​Keep in mind that Samsung could fix this any time. So, if it doesn't work, probably they have fixed it. However, as of July 1st 2021, I can confirm that it works perfectly (doesn't display the "device not compatible" error and file sharing works both sending and receiving). Also, I'm not responsible for any loss or damage.
Download​You can download it here.
Click to expand...
Click to collapse
How can i install quick share, i am unable find an exe file..

mnaveed said:
How can i install quick share, i am unable find an exe file..
Click to expand...
Click to collapse
You can download the latest version from the Microsoft Store. If you encounter issues, try uninstalling it and then install this older version here. Then, you can find the script here.

obrobrio2000 said:
You can download the latest version from the Microsoft Store. If you encounter issues, try uninstalling it and then install this older version here. Then, you can find the script here.
Click to expand...
Click to collapse
Microsoft Store does show any installation option, just information..

mnaveed said:
Microsoft Store does show any installation option, just information..
Click to expand...
Click to collapse
If you want the latest Store version: go here, paste the store link of the app, click the checkmark and then scroll down and download the one named "SAMSUNGELECTRONICSCoLtd.SamsungQuickShare_********_neutral_***************.msixbundle". Then open it and install it. You won't need to download every update like this, it'll automatically update from the Microsoft Store when there is a new version.
Instead, download this version here that has been reported to be more stable

HI, thank you for porting it to all windows devices.
But it don't work on my devices, which use intel ac9560 and ac8265, I guess it only work on ax series
The app told me to update wifi driver, which I'm already update.

Goodmorning and feel very appreciated for the port.tIt doesn't work for me. I own an s21 ultraand I followed the instructions. Although my PC sees the phone the transfer never completes. On the other side the phone doesn't even see th PC...

bromonano said:
Goodmorning and feel very appreciated for the port.tIt doesn't work for me. I own an s21 ultraand I followed the instructions. Although my PC sees the phone the transfer never completes. On the other side the phone doesn't even see th PC...
Click to expand...
Click to collapse
Good morning, may be you can help me with the setup, so I installed the app and ran the .bat file, when I launch the app it asked me to login to my Samsung account, which I did and then in next screen it says 'Turn on Bluetooth to connect to nearby devices', so do I need to turn on Bluetooth in both my laptop and Samsung Phone and then only it will connect?

onlytanmoy said:
Good morning, may be you can help me with the setup, so I installed the app and ran the .bat file, when I launch the app it asked me to login to my Samsung account, which I did and then in next screen it says 'Turn on Bluetooth to connect to nearby devices', so do I need to turn on Bluetooth in both my laptop and Samsung Phone and then only it will connect?
Click to expand...
Click to collapse
Good morning, yes, you need to turn on BT on both PC and phone, as well as Quick Share on your phone. The first time you'll send a file, it could ask you to pair your devices via bluetooth.

bromonano said:
Goodmorning and feel very appreciated for the port.tIt doesn't work for me. I own an s21 ultraand I followed the instructions. Although my PC sees the phone the transfer never completes. On the other side the phone doesn't even see th PC...
Click to expand...
Click to collapse
If the transfer shows "failed" or never completes, try going to Bluetooth settings and unpairing the devices, and then retrying sending a file, it will ask to pair again. Also: do you have Intel wireless drivers? And which version of Quick Share are you using (the latest one from Store or the older one)?
hsujim said:
HI, thank you for porting it to all windows devices.
But it don't work on my devices, which use intel ac9560 and ac8265, I guess it only work on ax series
The app told me to update wifi driver, which I'm already update.
Click to expand...
Click to collapse
Yes, they restrict allowed drivers to the ones that come with their Galaxy Book devices, which is AX series, so try applying DriverCheckBypass.reg file and then retry. Don't worry, it won't install anything and won't mess with your drivers, it will just create the registry keys and values that the app checks regarding drivers. However, thanks for reporting!

obrobrio2000 said:
Good morning, yes, you need to turn on BT on both PC and phone, as well as Quick Share on your phone. The first time you'll send a file, it could ask you to pair your devices via bluetooth.
Click to expand...
Click to collapse
Thanks for the quick response. I seem to have some Bluetooth connection issue with my laptop, when I try to pair my phone with it I get this message in my phone "Couldn't pair. Check settings for this device and try again."

obrobrio2000 said:
If the transfer shows "failed" or never completes, try going to Bluetooth settings and unpairing the devices, and then retrying sending a file, it will ask to pair again. Also: do you have Intel wireless drivers? And which version of Quick Share are you using (the latest one from Store or the older one)?
Yes, they restrict allowed drivers to the ones that come with their Galaxy Book devices, which is AX series, so try applying nonintelfix.reg file and then retry. Don't worry, it won't install anything and won't mess with your drivers, it will just create the registry keys and values that the app checks regarding drivers.
Click to expand...
Click to collapse
I had run it, but still not work.

onlytanmoy said:
Thanks for the quick response. I seem to have some Bluetooth connection issue with my laptop, when I try to pair my phone with it I get this message in my phone "Couldn't pair. Check settings for this device and try again."
Click to expand...
Click to collapse
You could try reinstalling/updating your BT drivers
hsujim said:
I had run it, but still not work.
Click to expand...
Click to collapse
Oh, I'm sorry. What doesn't work precisely? It fails when sending files? Did you try both PC->phone and phone->PC?

obrobrio2000 said:
You could try reinstalling/updating your BT drivers
Oh, I'm sorry. What doesn't work precisely? It fails when sending files? Did you try both PC->phone and phone->PC?
Click to expand...
Click to collapse
both, computer cannot find phone, phone can find computer but sending failed.

hsujim said:
both, computer cannot find phone, phone can find computer but sending failed.
Click to expand...
Click to collapse
Try toggling Quick Share off and on on your phone and try setting it temporarily to "Everyone" instead of "Only contacts" (both on PC and phone) and retry.

Awesome, thank you! This are the kind of things I expect to find here!

obrobrio2000 said:
Try toggling Quick Share off and on on your phone and try setting it temporarily to "Everyone" instead of "Only contacts" (both on PC and phone) and retry.
Click to expand...
Click to collapse
I'll try it next week, thanks for your response
I tried on ax200, success!! thanks you

hsujim said:
I'll try it next week, thanks for your response
I tried on ax200, success!! thanks you
Click to expand...
Click to collapse
Fantastic! Thank you for the feedback!
enij said:
Awesome, thank you! This are the kind of things I expect to find here!
Click to expand...
Click to collapse
Thank you for commenting, does it work well? Let me know if you have any issue

obrobrio2000 said:
You could try reinstalling/updating your BT drivers
Click to expand...
Click to collapse
I uninstalled the Bluetooth adapter and re-installed also. In services.msc, all three Bluetooth related services are set to automatic start. Literally spent at least 3 hours in the morning today to troubleshoot the Bluetooth issue in my laptop, no luck

onlytanmoy said:
I uninstalled the Bluetooth adapter and re-installed also. In services.msc, all three Bluetooth related services are set to automatic start. Literally spent at least 3 hours in the morning today to troubleshoot the Bluetooth issue in my laptop, no luck
Click to expand...
Click to collapse
Seems like an issue unrelated to Quick Share, but to exclude it completely try these possible solutions:
- try to pair the PC with another phone
- if the driver is not Intel AXxxxx try installing the DriverCheckBypass.reg file
- the unsuccessful pairing is the one that asks when you try sending a file with QS, right? If yes, try to pair it manually in Windows bluetooth settings
- which version did you try? The latest one or the older one? If you are trying the first then try the latter and viceversa.

unable to boot in recovery

Hi, can anyone please point me to the correct method for booting in recovery? All the volume up/down+power key combinations do not work for me.
Thanks.

gbmolina said:
Hi, can anyone please point me to the correct method for booting in recovery? All the volume up/down+power key combinations do not work for me.
Thanks.
Click to expand...
Click to collapse
Hi how are things.
do you have root?
Magisk?
if you have magisk, from there you can start.

No root, obviously, otherwise there is a ton of apps for booting in recovery.

gbmolina said:
No root, obviously, otherwise there is a ton of apps for booting in recovery.
Click to expand...
Click to collapse
I understand that the equipment must be turned off.
1.connect usb cable to pc.
2.connect cable to s20 fe.
(wait for the battery percentage to appear.
3. press volume + and power at the same time (it will turn off after 2 seconds, keep pressing, until the s20 logo appears
4. done.

Thank you, worked like a charm. This is new, I mean, the connection to the PC. Thanks again.

gbmolina said:
Thank you, worked like a charm. This is new, I mean, the connection to the PC. Thanks again.
Click to expand...
Click to collapse
If you want to be root at some point.
Magiks application has the option to reboot in recovery mode.
excellent day .

Hi guys, I have the exact same problem (no root, Android 13 update from 1st of March) and your solution doesn't work. It doesn't want to go into recovery or download mode whatever combinations I try. Do you have any advices?

yabol708 said:
Hi guys, I have the exact same problem (no root, Android 13 update from 1st of March) and your solution doesn't work. It doesn't want to go into recovery or download mode whatever combinations I try. Do you have any advices?
Click to expand...
Click to collapse
if your team is business, it will not work.
There are variants that are blocked by companies.
If that's your case, you can't this way.
Several teams have already passed with that detail.

mezacorleehone said:
if your team is business, it will not work.
There are variants that are blocked by companies.
If that's your case, you can't this way.
Several teams have already passed with that detail.
Click to expand...
Click to collapse
No, it is and it was a personnal one. Unless you mean blocked by mobile operator.

yabol708 said:
No, it is and it was a personnal one. Unless you mean blocked by mobile operator.
Click to expand...
Click to collapse
There are teams that your work gives you. (companies, corporations, etc.)
They send to ask for the equipment with Samsung, they block the access to recovery and download.
In my repair shop, Samsung equipment arrives with that block.
In your case, you say that it is not business, I don't know what causes your problem.

yabol708 said:
No, it is and it was a personnal one. Unless you mean blocked by mobile operator.
Click to expand...
Click to collapse
keep trying
I put the cable into the PC, halfway plug the cable into the phone while it's turned off. then I start holding volume up plus power for recovery and then push the cable all the way into the phone immediately after.

Ok. Thank you both for the help. I'll try this method as well.

Found out why the recovery mode didn't want to turn on. The cable was just for charging :/ Plugged in another one and it worked like a charm. Thanks for all the help guys.

I just joined. I can not see where I start a new thread to ask a question.
Can someone direct me?
BTW - My problem is I installed Fire Toolbox, It ran once and now only open a gray box on the sceen and freezes. Rebooted , uninstalled - reinstalled, tried diff versions...?