Hey,
just got my Z1 yesterday, everything runs fine. Expect I cant fit the Micro Sim Card into the Slot -,-. WTF. I tried it several times and it's always stuck and i cant close the cover of the Micro Sim Card Slot. I got a delicate dissecting forceps with which I can pull it out again, but seriously, if it doesnt work im going to get the Samsung S4 Active.
EDIT: OFC Im using the MicroSim "Adapter" which is integrated in the MicroSIM slot!
Never had such problems with any phone yet...
Any advice/ experience?
Thx in advance,
TCIG
Are you trying to put it in the sd card slot?
The sim card slot is on the opposite side to the charger slot.
I also found it has to go in just one way and it goes in easily. If you have to force it, turn it round or turn it over
Its all there in the instruction booklet you got with the phone
gregbradley said:
Are you trying to put it in the sd card slot?
The sim card slot is on the opposite side to the charger slot.
I also found it has to go in just one way and it goes in easily. If you have to force it, turn it round or turn it over
Its all there in the instruction booklet you got with the phone
Click to expand...
Click to collapse
Thx for ur answer. Im not trying to put it in te sd card slot. Micro Sim Slot it right upper the Power Button. Unfortunately the instruction booklet doesnt help me, because im following the instructions just like displayed.
Thx Anyway, maybe its just problem of the phone as it doesnt slides in easily...
Heading for an S4 active, because I think it fits my hands better, still its more fragile...
Okkk, the fool speaks again: I rly got it to put it in the wrong way! The thick end of the SIM card adapter should be head to the top of the phone. I always put it in to the bottom of the phone -,-.
Thank u gregbradly, u rly helped me .
So typical for me...
Related
Issue: when i try to insert my mini SD into my 8125, it doesn't "lock" or secure the card in place. it just kinda jumps up and down as i continuously try to press it down.
Reslove....?: anyone know how i can remedy this promblem. i assume it's some mechanism/spring locking issue, but i'm unsure. there is a place here in town that will do the repair for, surprise surprise, $60. am i gettin' cheated or should i just fork over the money? THANKS!!!!
I have a fix for you, it's not pretty, but it's simple. just wrap a piece of electrical tape once around the top about 2/3 of the card and it should stay in their fine. I had to do this to a loose card I had and worked great for keeping it in there. Just make sure you don't wrap any of the important parts of it and you should be ok.
Yup!
did the same,but I inserted a small folding made of tissue paper on the upper side of the Sdcard after inserting into it's slot,it made the sdcard to stay in the slot firmly and firmly connected to the connectors,did did the job and remained like this and working for almost six months.Only precaution here is to be sure that the connectors don't get covered and make good and firm connection,
Bonus!
THANKS for the quick reply guys! i really appreciate it. i'll give your advice a go and see what happens.
Well, i took the advice and i must say its not too bad of a rig, if ya just wanna get the job done. i usded a single strip of electrical tape and put it once around the mini sd card. it seems to be "goin no where" for the time being. whats nice is that i have a micro sd w/ with mini and regular sd adapters. so when the micro is in plugged into the tapped mini in my phone, all i need to do is simply remove the micro from the top of the "trapped" mini sd and place it in my regular sd adapter and then into my laptop sd slot. it seems like a happy medium for now. we'll see how it goes.
Hello
I've got one of this Kaiser since a few days ago.
But I dont know if my micro-sd card slot is broken or not: I had just introduced my micro-SD card into the slot (with the pins downside) and it didn't make the usual "click". The problem comes now, because I'm not able to extract it from the slot.
¿Anyone with the same problem? ¿Anyone who can help me to extract it?
Thank you in advance!!
You have to work it hard and pop it's cherry.... they are always tight the first few times you insert the card. I had to use tweezers to remove it the first few times. Each time you use it it gets better...
Yeah...push it in with your fingernail to release it, then use your nail to pull it out with the lip across the top.
Good day folks
Have anyone encountered a sim card error or an internal storage error (low disk space) on your HD7s ?
And what solutions did you find or attempt?
I think I found one solution for this issue. But would like to see first if anyone beside me got this problem.
Regards,
Xeno
I also encountered sim card error. But no space error.
How did you managed to fix sim card error?
In order to fix this I had to unscrew the warranty sticker, so this means your warranty will be gone. (If you care about the warranty at this point anyway)
You need to follow Wolfman017 guide to upgrade the SD card, but you will need to take it up a notce.
You will need to remove the whole back of the phone, until you see the phone's board.
Once your remove the whole back, notice right above where you insert your sim card. There should be small black piece which connects the sim slot to the board.
Use your fingernails to pull it up gently. Then press it back down with your finger until it clicks properly. A bit of force but not too much.
Once done no need to assemble the whole phone yet. Just put the back cover and sim card, place back the battery and test.
Hopefully this fixes the issue.
Let me know how it goes for you. If it does take a couple of pictures of the process and post them in the thread.
Regards,
Xeno
Hello.
I have same problem. Can you make some photo of this process?
It did not help me. I'm not sure that I do everything right.
Excellent job mr Xenohart i confirm this work 100%
disassembly the phone ( you can search the video in youtube ) then only need remove the socket connector sim card board and put again. test and enjoy
Sim error
'' You need to follow Wolfman017 guide to upgrade the SD card, but you will need to take it up a notce.
You will need to remove the whole back of the phone, until you see the phone's board.
Once your remove the whole back, notice right above where you insert your sim card. There should be small black piece which connects the sim slot to the board.
Use your fingernails to pull it up gently. Then press it back down with your finger until it clicks properly. A bit of force but not too much.
Once done no need to assemble the whole phone yet. Just put the back cover and sim card, place back the battery and test. ''
Hello Xeno, i am wonder if you can show me some pictures of you doing this, because i can't understand to well, and i have this problem to ! I will like if you reply. Thanks
I'm having trouble ejecting the micro sd tray. i'm using the ejector tool and insert it in that tiny hole and nothing happens. The instructions here http://www.samsung.com/us/support/answer/ANS00045142/997422471/SM-T810NZWEXAR say to gently press the tool but I did that but it doesn't pop out. Is there a video tutorial?
I find its more than gentle that you need to eject it.
ashyx said:
I find its more than gentle that you need to eject it.
Click to expand...
Click to collapse
oh thanks I tried it again but this time a hard push and finally got it ejected! :victory: samsung needs to reword their user manual
Ruriko said:
oh thanks I tried it again but this time a hard push and finally got it ejected! :victory: samsung needs to reword their user manual
Click to expand...
Click to collapse
I will still call it gentle, but with a slight firm push, don't force it or you can damage the internal part, then you will have a problem removing the SD card.
Try not to remove it too much.
Yeah. What was wrong with the previous "press to eject" or whatever it was called?
graysooner said:
Yeah. What was wrong with the previous "press to eject" or whatever it was called?
Click to expand...
Click to collapse
Doesn't look nice and don't last that long, and you have to put up with the flimsy cover, even though it looks nicer, Samsung has gone cheap with these tray, whiles others are making the micro sd/sim trays in metal, we have plastic.
I was afraid also to press it as hard as I had to
Just to let others know, I had to press the metal tool so hard that it kinda hurt my fingertip. It did finally open, but didn't feel right having to use that kind of force on something so small and delicate. Thanks for sharing info. I agree tho, I won't be changing this card very often.
Get a 200 or 256 GB SD card and an OTG adaptor and you shouldn't have to change at all.
There are some ejector tools that are thicker than others, so the tool can cause friction when you insert it to remove the sd card. I know I had a phone that had a really small hole and the ejector tool I commonly used was too big for it.
Can anyone eject their sim tray and take a photo of the inside? Mine is straight up stuck (feels like the press-ejector lever thing is depressed but the tray is not moving).
Picture would help to see if there is anyway to get this thing out before I heat up the back glass and give it a go. (micro sd and nano sim are in there)
taphius said:
Can anyone eject their sim tray and take a photo of the inside? Mine is straight up stuck (feels like the press-ejector lever thing is depressed but the tray is not moving).
Picture would help to see if there is anyway to get this thing out before I heat up the back glass and give it a go. (micro sd and nano sim are in there)
Click to expand...
Click to collapse
The pictures are bad but i think you can find what you want. (see attachements)