Hi and sorry if i'm wrong here, but i am not able to write in the dev directory, yet.
I unlocked and rooted my phone but now i am not able to update to the new OTA 39002 version.
Is there a way for a temporary unroot or something like this? Because i want to keep my root!
Thank you for help.
baxxter106 said:
Hi and sorry if i'm wrong here, but i am not able to write in the dev directory, yet.
I unlocked and rooted my phone but now i am not able to update to the new OTA 39002 version.
Is there a way for a temporary unroot or something like this? Because i want to keep my root!
Thank you for help.
Click to expand...
Click to collapse
With something like this:
https://play.google.com/store/apps/details?id=org.projectvoodoo.otarootkeeper&hl=fr
But root should not prevent for an OTA update
Le_Poilu said:
But root should not prevent for an OTA update
Click to expand...
Click to collapse
Thanks for fast answer.
I thought the same, but when it is starting up to update in the middle it shows the "dead" android with the red "!" , you know.
after that the phone boots normaly and it says "not successfull"...
i already tried some times...
I will try the rootkeeper, thanks for that again.
baxxter106 said:
Thanks for fast answer.
I thought the same, but when it is starting up to update in the middle it shows the "dead" android with the red "!" , you know.
after that the phone boots normaly and it says "not successfull"...
i already tried some times...
I will try the rootkeeper, thanks for that again.
Click to expand...
Click to collapse
Have you change some file (like to disable camera sound ) ?
I've the same issue with OTA, and I revert all changes I've made in the past, and it work.
If you rooted your Device by changing the Kernel, you have to flash the Boot signed of the Base FW (32 i guess).
The update compares the Base Rom and the Root Exploit set you an secured Kernel, that doesn't match with the System > Problem solved.
The Root won't deny the Update. You can temp. unroot with the ported Rootkeeper (thanks to Mattlgroff) and restore the Root after the Update.
But the Boot.img must fit!
I think i did not change something. Except the kernel that came wih the rooting by mattlgroffs tool.
So i need to change the kernel with a recovery kernel via adb?
Could somebody tell me the comands? (With cwm on a SGS was it a bit easier )
Sent from my XT890 using xda app-developers app
Yes, you have to use fastboot for it (it's in the Folder of the root exploit)
Download your current FW, unpack it and copy the Boot_signed into the Root folder. Then open the cmd window, navigate to the Root Folder by cd command.
Flash the image by
Fastboot flash boot boot_signed.
Alternate you can rename it to razr_i_boot.img and overwrite the secured Kernel in the Exploit. Than just root again and it will flash the right secured Kernel.
Thank you. I will try that today. Btw. where can i find mattlgroffs root keeper? The version in the play store does...nothing?
Sent from my XT890 using xda app-developers app
http://forum.xda-developers.com/showthread.php?p=34248515
hey guys i just gotta a new software update on my htc one and i just realized that you cannot update your device if rooted because each time i try and install the new update it just boots into recovery which im not sure if thats suppose to happen or not. Anyways i tried this app called voodoo ota rootkeeper but each time i push protect root it just restarts my phone instead of giving me the option to temporarily un-root. Is there any other way how i can update my phone Thanks.
i am kinda confused what you are trying to achieve, you are rooted on a stock rom, but you want to update the ota, is that correct? my guess is that you have changed some system or other files (or changed kernel, or put a custom recovery) if anything of the previous is true, you'd have to go back to complete stock and then install the ota... or just get a custom rom there are 4.2 out there you know.
When you unlock the bootloader, some HTC apps are automatically deleted. If you're trying to install an official OTA, it will check for those apps and abort the install if they're not there. The only way to install it will be to get those apps back, or restore from an NAND backup that has them.
Or, alternatively, use one of the custom ROMs from either these forums or the HTC One International forums. They're way better anyway, and are running on Android 4.2.2.
yeah all i wanna do is upgrade to 4.2 so i gusse the best thing to do is just install a custom rom then and sorry sorta new to all this stuff
If all you want is 4.2 then you would need to flash either trickdroid or arhd latest version, I don't think 4.2 is even officially released yet as an ota anyway
Sent from my HTC One using xda app-developers app
alright thanks. but what is OTA exactly I just downloaded this app (voodoo OTA rootkeeper) from the google play store which was suppose to let me temporarily un-root my phone so i could update to the new software
Hey Everyone,
- I'm running Stock NB4, Rooted with kingo.
Afer i rooted i deleted the Knox fils using Titanium... (i know i know, should of just froze it)
I'm trying to do the Sideload process using adb to run the update/fix for the OTA, and it's failing, one of the files mentioned in the CMD window happens to pertain to the knox file i deleted...
So i'm thinking maybe that's why i can't run this update from ADB, b/c those files need to be there.. Agreed? yes or no?
Anyways.. if anyone wants to be amazing... Could you dump all the files in here? (if you go to Titanium, and just search for the word "Knox" those are the files i speak of.
computermilk said:
Hey Everyone,
- I'm running Stock NB4, Rooted with kingo.
Afer i rooted i deleted the Knox fils using Titanium... (i know i know, should of just froze it)
I'm trying to do the Sideload process using adb to run the update/fix for the OTA, and it's failing, one of the files mentioned in the CMD window happens to pertain to the knox file i deleted...
So i'm thinking maybe that's why i can't run this update from ADB, b/c those files need to be there.. Agreed? yes or no?
Anyways.. if anyone wants to be amazing... Could you dump all the files in here? (if you go to Titanium, and just search for the word "Knox" those are the files i speak of.
Click to expand...
Click to collapse
all knox NB4 files
[Q] Having trouble figuring out rooting & recovery works on Moto X coming from Nexus
I'm no noob, I've been rooting for a while, but I can't figure out how to root this damn thing . On a Nexus, I just unlocked, flashed TWRP, then flashed superuser from TWRP, and I was done. How does it work on this phone? Can I just flash TWRP and then from TWRP flash a root zip? I'd rather not use any toolkits and such (which seem to be all the rage on this forum). Running Pure edition btw. On latest Lollipop OTA.
mateopase said:
I'm no noob, I've been rooting for a while, but I can't figure out how to root this damn thing . On a Nexus, I just unlocked, flashed TWRP, then flashed superuser from TWRP, and I was done. How does it work on this phone? Can I just flash TWRP and then from TWRP flash a root zip? I'd rather not use any toolkits and such (which seem to be all the rage on this forum). Running Pure edition btw. On latest Lollipop OTA.
Click to expand...
Click to collapse
Yes its pretty much the same, the forums are abit immature at the moment there aernt any proper guides, i just did things the Nexus way
unlock your bootloader first through motorola, following the instructions (make sure there are no spaces in the unlock key): https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
flash twrp, then install the superSU zip from adb sideload or from your internal storage if it was already downloaded
youre done
also, you could flash the stock logo image to remove the warning boot image, http://forum.xda-developers.com/moto-x-2014/development/warning-message-unlocked-bootloader-t2871478 to make things look nicer
IINexusII said:
Yes its pretty much the same, the forums are abit immature at the moment there aernt any proper guides, i just did things the Nexus way
unlock your bootloader first through motorola, following the instructions (make sure there are no spaces in the unlock key): https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
flash twrp, then install the superSU zip from adb sideload or from your internal storage if it was already downloaded
youre done
also, you could flash the stock logo image to remove the warning boot image, http://forum.xda-developers.com/moto-x-2014/development/warning-message-unlocked-bootloader-t2871478 to make things look nicer
Click to expand...
Click to collapse
Awesome, thanks. Looks like that's what I'll end up doing. I really messed up my phone though when trying to get back to stock. Hopefully my stock image request will be approved soon and I'll be able to go through the process again.
One more question, if I kinda messed up restoring everything to 4.4.4, but I can boot the phone properly, will updating to 5.0 via an OTA update fix any mistakes I made along the way?
mateopase said:
One more question, if I kinda messed up restoring everything to 4.4.4, but I can boot the phone properly, will updating to 5.0 via an OTA update fix any mistakes I made along the way?
Click to expand...
Click to collapse
Not necessarily. The ota contains only changed files (not all files) and therefore if something is wrong with a file that wasn't changed (including anything in /data) then it will still be broken after the update.
crpalmer said:
Not necessarily. The ota contains only changed files (not all files) and therefore if something is wrong with a file that wasn't changed (including anything in /data) then it will still be broken after the update.
Click to expand...
Click to collapse
Alright. Do you know of any way to return to stock without going through Motorola's waiting game. It's been a few hours now and I still haven't been approved for the download.
mateopase said:
Alright. Do you know of any way to return to stock without going through Motorola's waiting game. It's been a few hours now and I still haven't been approved for the download.
Click to expand...
Click to collapse
Honestly, I haven't looked at what options are available for images to flash.
When I asked for firmware, I believe that I asked on a Friday evening and received access on the following Monday morning. So maybe you'll get access in another 15-16 hours? That is your safest bet if your phone is working well enough to last you until then.
**You can begin the following process from 4.4.x Build/ROM or higher but you must already have Root Access**
**Required** FlashFire - Play BETA - PREVIEW
**Caution!** The following process is only for the I537 AT&T S4 "Active" variant. Use on any other device may result in a hardbrick!
Download:
- I537_OC7_Stock_Rooted_ROM
- I537_OC7_Stock_Rooted_Deodexed_ROM
Pevious Builds:
- I537_OC6_Stock_Rooted_ROM
- I537_OC6_Stock_DeOdexed_ROM
Set your screen timeout setting to 10 mins before beginning!
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Select "Flash Zip or OTA" and locate and select the ROM. Leave "Auto-mount" unchecked under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and set "Reboot" setting to "Download."
6. Press the lightning bolt then "Ok" to begin the flash.
7. Once the flash is complete and the device reboots into "Download" mode, flash the I537_OC7_Bootloader using Odin's PDA/AP slot.
The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition. Once complete your device will reboot and pause on the AT&T splash screen for 1 - 2 minutes (15 - 20mins for DeOdexed version) before completely rebooting. Done!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Known Issues:
- None!
Optional - Enable Native Tethering:
- I537_OC7_TetherAddOn
- I537_OC6_TetherAddOn (Flash using FF's "Flash zip or ota" option.
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. The process will update your Modem, Non-hlos, System, Kernel, and Stock Recovery.
3. No need to wipe prior to flashing! The ROM will automatically perform a factory data reset.
4. To learn more about FlashFire's capabilities on locked bootloader devices see here: http://forum.xda-developers.com/showpost.php?p=60070810&postcount=2
Credits:
@thisisapoorusernamechoice - for capturing the ota update and for his system dump.
@Chainfire
muniz_ri said:
**You can begin the following process from any Build/ROM but you must already have Root Access**
**Attention** The following process is only for the I537 AT&T S4 "Active" variant. Use on any other device may result in a hardbrick!
Instructions:
Click to expand...
Click to collapse
First of all, thank you thank you thank you so much for this. Yeah I grabbed you the OTA's but thanks to you (and of course Chainfire & his FlashFire) we can go from KK to LP with root. And on day one of the OTA. Awesome. :good: So down to business, and I hope I'm not getting ahead of myself or barking up the wrong tree, but hear me out on this one. @Joe-Tech was generous enough to port his regular S4 Google Play Edition (Pure Nexus) 4.4.4 Rom over to our phone. Could we repeat that for this OC6 build, using say, this rom as a base (or another if that turns out to be incompatible for whatever reason)? I doubt I have the expertise to pull that off but if it would help I'd get to work on another masterpatch and speaker phone fix
thisisapoorusernamechoice said:
First of all, thank you thank you thank you so much for this. Yeah I grabbed you the OTA's but thanks to you (and of course Chainfire & his FlashFire) we can go from KK to LP with root. And on day one of the OTA. Awesome. :good: So down to business, and I hope I'm not getting ahead of myself or barking up the wrong tree, but hear me out on this one. @Joe-Tech was generous enough to port his regular S4 Google Play Edition (Pure Nexus) 4.4.4 Rom over to our phone. Could we repeat that for this OC6 build, using say, this rom as a base (or another if that turns out to be incompatible for whatever reason)? I doubt I have the expertise to pull that off but if it would help I'd get to work on another masterpatch and speaker phone fix
Click to expand...
Click to collapse
I have an LP 5.0.1 base, ported using that ROM that you mentioned, but we all know safestrap is not compatible yet with 5.x and FlashFire can only flash TW base rom from my experience, and it still on beta phase, so let just cross fingers, i know something coming soon
Joe-Tech said:
I have an LP 5.0.1 base, ported using that ROM that you mentioned, but we all know safestrap is not compatible yet with 5.x and FlashFire can only flash TW base rom from my experience, and it still on beta phase, so let just cross fingers, i know something coming soon
Click to expand...
Click to collapse
You're the man. Thanks for this info. I'm going to make a masterpatch, hopefully it'll be needed soon. Obviously I'll be happy to test anything if and whenever something like this does happen. If I can do anything at all to help that along just let me know. I was not aware FF could only flash TW base roms, shoot
Still loving your 4.4.4, I'm torn on taking the update if it means going back to touchwiz with no current AOSP option
thisisapoorusernamechoice said:
You're the man. Thanks for this info. I'm going to make a masterpatch, hopefully it'll be needed soon. Obviously I'll be happy to test anything if and whenever something like this does happen. If I can do anything at all to help that along just let me know. I was not aware FF could only flash TW base roms, shoot
Still loving your 4.4.4, I'm torn on taking the update if it means going back to touchwiz with no current AOSP option
Click to expand...
Click to collapse
Only way im thinking to boot the new LP ROM, is to use @muniz_ri method so we can upgrade and keep root. So now we going to be on the OC6 kernel and baseband, since the gpe can boot without flashing the kernel. Then we can flash the GPE 5.x ROM, either with safestrap or FlashFire, and we can also use Odin to flash the stock kernel/partitions. But too bad none of them worked for me after the upgrade, FF will sit there for ever try to get root permission.
Joe-Tech said:
But too bad none of them worked for me after the upgrade, FF will sit there for ever try to get root permission.
Click to expand...
Click to collapse
Were other rooted apps able to get root permission?
thisisapoorusernamechoice said:
Were other rooted apps able to get root permission?
Click to expand...
Click to collapse
Nope I even tried root checker, the su app is there on the app drawer, i was able to updated from the play store, but still wasn't working though.
delete
Sent from my SAMSUNG-SGH-I537 using XDA Free mobile app
Joe-Tech said:
Nope I even tried root checker, the su app is there on the app drawer, i was able to updated from the play store, but still wasn't working though.
Click to expand...
Click to collapse
Just had a thought, probably nothing. When doing the kitkat to lollipop update to keep root with flashfire, would it help anything to convert flashfire to a system app before doing the update? Sorry if this is a stupid question
thisisapoorusernamechoice said:
Just had a thought, probably nothing. When doing the kitkat to lollipop update to keep root with flashfire, would it help anything to convert flashfire to a system app before doing the update? Sorry if this is a stupid question
Click to expand...
Click to collapse
I don't think it will make any difference.
@muniz_ri: This is great, thanks for all your work on this. As I understand it, this method will update you to OC6 with root if the original firmware was already rooted. So my question is then, if a user has already taken the OC6 update and would like to root afterwards is it currently impossible? Is the only way to root OC6 to downgrade back to NE3, root, and then follow your instructions to update to OC6 with root?
I'm guessing a root vulnerability hasn't been found for the Samsung 5.0 firmware yet, but I just wanted to check.
Also, I posted this in the other thread, but has anybody actually downgraded from OC6 to NE3 successfully? I don't want to give people wrong information.
Okay, I need some help here. I'm not quite understanding this:
1. Extract the I537_OC6_Stock_Rooted_Firmware.tar from the .rar and place it and the I537_OC6_Stock_Partitions.zip onto your device (use either internal or ext-sdcard).
Place what where? I used WinRAR to extract the file? What is the OC6 stock partition?
mikelets456 said:
Okay, I need some help here. I'm not quite understanding this:
1. Extract the I537_OC6_Stock_Rooted_Firmware.tar from the .rar and place it and the I537_OC6_Stock_Partitions.zip onto your device (use either internal or ext-sdcard).
Place what where? I used WinRAR to extract the file? What is the OC6 stock partition?
Click to expand...
Click to collapse
Extract the tar from the rar. Leave the zip as is. Copy the tar and the zip to your phone's internal memory or external SD card, somewhere it'll be easy for you to find
Devo7v said:
@muniz_ri: This is great, thanks for all your work on this. As I understand it, this method will update you to OC6 with root if the original firmware was already rooted. So my question is then, if a user has already taken the OC6 update and would like to root afterwards is it currently impossible? Is the only way to root OC6 to downgrade back to NE3, root, and then follow your instructions to update to OC6 with root?
I'm guessing a root vulnerability hasn't been found for the Samsung 5.0 firmware yet, but I just wanted to check.
Also, I posted this in the other thread, but has anybody actually downgraded from OC6 to NE3 successfully? I don't want to give people wrong information.
Click to expand...
Click to collapse
Correct, you will need to go back to NE3 then use towelroot before starting this process. And yes, the aboot qfuse counter determines whether or not you can downgrade. I checked it and it does allow for downgrading.
mikelets456 said:
Okay, I need some help here. I'm not quite understanding this:
1. Extract the I537_OC6_Stock_Rooted_Firmware.tar from the .rar and place it and the I537_OC6_Stock_Partitions.zip onto your device (use either internal or ext-sdcard).
Place what where? I used WinRAR to extract the file? What is the OC6 stock partition?
Click to expand...
Click to collapse
If all of the above is beyond your level of understanding I strongly suggest you reconsider attempting to modify your phone.
muniz_ri said:
Correct, you will need to go back to NE3 then use towelroot before starting this process. And yes, the aboot qfuse counter determines whether or not you can downgrade. I checked it and it does allow for downgrading.
Click to expand...
Click to collapse
Great thanks, one more question: Would it be possible to use something similar to W0lfdroids method of rooting? So on stock OC6, flash the NE3 kernel (since downgrading is possible), root with Towelroot, the flash back to the OC6 kernel. Just thinking about it I'm guessing it wouldn't work because you wouldn't be able to boot 5.0 with a 4.4.2 kernel, but I figured I'd ask.
Devo7v said:
Great thanks, one more question: Would it be possible to use something similar to W0lfdroids method of rooting? So on stock OC6, flash the NE3 kernel (since downgrading is possible), root with Towelroot, the flash back to the OC6 kernel. Just thinking about it I'm guessing it wouldn't work because you wouldn't be able to boot 5.0 with a 4.4.2 kernel, but I figured I'd ask.
Click to expand...
Click to collapse
Did not bother to try since it has not worked on any 5.0 release so far.
muniz_ri said:
Did not bother to try since it has not worked on any 5.0 release so far.
Click to expand...
Click to collapse
Any chance I can implore you to try it since there will inevitably be a bunch of people already on the OC6 firmware asking how to root it and will get pissed when they find they have to wipe their phone? Or maybe you could just provide the stock OC6 kernel and I can convince @thisisapoorusernamechoice to give it a shot?
For what it's worth, just went through the process in post 1. Everything went fine, but after the Galaxy S4 boot screen, it goes black and stays. I can boot to download mode and stock recovery, so it's not a major issue, and likely something I did. I'll mess with it a bit more then Odin back to stock and start over.
bobbylx said:
For what it's worth, just went through the process in post 1. Everything went fine, but after the Galaxy S4 boot screen, it goes black and stays. I can boot to download mode and stock recovery, so it's not a major issue, and likely something I did. I'll mess with it a bit more then Odin back to stock and start over.
Click to expand...
Click to collapse
A couple questions:
What firmware were you coming from?
How long did you wait?
Did you have Xposed enabled?