Database Develop

Cannot recognize one or more recipients or the address is not valid

The above error drives me nuts!
I got that popup error everytime I send SMS.
If I click YES, the message will be sent anyway.
I tried all sort of combination of number in the Outlook Contact:
+31624000222
Or 624000222
Or 0624000222
+31 = the country code.
Anyone know why I got that error?
How to fix that?
Thanks

Anyone does not get this problem?

have you tried using 011 (011624000222) instead of the + ? i had to do that when i was living in germany and using t-mobile on my wizard that had wm6 on it.. just a thought ...though adding the 0 in front of the dialed number (0624000222) seemed to work too

Yes, I did that. And it did not work.
Anyway, I gave up and hard reset the device.
I installed everything again and now it is ok, no error popup like that anymore.

gogol said:
The above error drives me nuts!
I got that popup error everytime I send SMS.
If I click YES, the message will be sent anyway.
I tried all sort of combination of number in the Outlook Contact:
+31624000222
Or 624000222
Or 0624000222
+31 = the country code.
Anyone know why I got that error?
How to fix that?
Thanks
Click to expand...
Click to collapse
After few troubleshoots & hard resets, i finally got the solution:
go to messaging/menu/options/address tab
(in, contacts, get email addresses from) : choose [all e-mail fields].
it will solve ur problem.

i;m having the same prob. the phone can't recognize the country code or something ... when the country code is added to the number the local caller name is not displayed. and if the country code is removed from the number then in SMS the sender name is not displayed as most operators send the numbers with country code in the message headers ... damn !

checking the get address from all fields does work.
i forgot that I had unchecked that the other day..lol

Hi,
I tried doing whats described above but in my case, the phone already had the option "selected all fields" selected. I tried deselecting and selecting it again but in vain...
Any other suggestions??
tx
P.S: I have a samsung omnia

thanks - found this and it appears to work for me. Message was bugging me.

TyTN II => some Questions / Problems

Hi @all
Yesterday I bought the TyTN II. I'm very pleased about it, but I have now some Questions.
-When I receive SMS, is it possible to see somewhere when it has been sent?
-When I get the delivery report of a sent SMS, I only see the number of the recipent and not the name which is stored in the phone. Furthermore would it be possible to determine, when the SMS has been delivered?
-In the Today-Screen is only one calendar entry shown at once unfortunately. Is there a possibility to show more than one entry within the HTC Home Screen?
Thank you very much in advance for your help.
Best regards
JCD.SAG

JCD.SAG said:
Hi @all
Yesterday I bought the TyTN II. I'm very pleased about it, but I have now some Questions.
-When I receive SMS, is it possible to see somewhere when it has been sent?
-When I get the delivery report of a sent SMS, I only see the number of the recipent and not the name which is stored in the phone. Furthermore would it be possible to determine, when the SMS has been delivered?
-In the Today-Screen is only one calendar entry shown at once unfortunately. Is there a possibility to show more than one entry within the HTC Home Screen?
Thank you very much in advance for your help.
Best regards
JCD.SAG
Click to expand...
Click to collapse
1. To view when it has been sent, just open the message and its at the top. By default, the message is slightly scrolled down but if you scroll up, you will see the To: and Sent Date.
2. The name on delivery reports is a known "issue" or annoyance. Previously, I did use a program that was written by someone here but for the life of me, cannot remember what it was called. This worked perfectly with the number being matched with contacts list.
3. Calendar, not sure at the moment... will find out if I can/have time

Heres the delivery thing, not tried it on the Kaiser yet but might do later on
http://www.saman-cz.com/ppc/index.html

akash_84 said:
Heres the delivery thing, not tried it on the Kaiser yet but might do later on
http://www.saman-cz.com/ppc/index.html
Click to expand...
Click to collapse
Can someone verify it works on the TyTN II.

akash_84 said:
1. To view when it has been sent, just open the message and its at the top. By default, the message is slightly scrolled down but if you scroll up, you will see the To: and Sent Date.
2. The name on delivery reports is a known "issue" or annoyance. Previously, I did use a program that was written by someone here but for the life of me, cannot remember what it was called. This worked perfectly with the number being matched with contacts list.
3. Calendar, not sure at the moment... will find out if I can/have time
Click to expand...
Click to collapse
Thank you very much for your replies. It's my fault I didn't scroll up in the SMS, now I see the sent-date Thank you for the hint
I could solve the problem regarding the calendar entries display on the today screen. I installed the very good tool Calender+
http://www.mohairsofa.com/Default.aspx/document/10
and now you can choose how many entries / how many days should be displayed.
Thank you for the link for the SMS Delivery Fix Tool. I downloaded and installed it, but seems that it doesn't function... I sent a E-Mail to the developer of the tool.
Best regards

CorruptedSanity said:
Can someone verify it works on the TyTN II.
Click to expand...
Click to collapse
Just tried it on my Orange TyTn II - sent one sms, worked fine...

see attached
MT Software TodayAgenda, completely configurable.
Greetz

JCD.SAG said:
Thank you very much for your replies. It's my fault I didn't scroll up in the SMS, now I see the sent-date Thank you for the hint
I could solve the problem regarding the calendar entries display on the today screen. I installed the very good tool Calender+
http://www.mohairsofa.com/Default.aspx/document/10
and now you can choose how many entries / how many days should be displayed.
Thank you for the link for the SMS Delivery Fix Tool. I downloaded and installed it, but seems that it doesn't function... I sent a E-Mail to the developer of the tool.
Best regards
Click to expand...
Click to collapse
h3mp says it works! Did you install it differently? What error are you getting?

Hi @all
Thank you for your very helpful replies. In the meanwhile the SMS Delivery Fix thing is now fully functional. The only thing I miss is the display of the time when the SMS arrived.
The Calendar+ app works really fine.
Another strange problem occured in connection with the TomTom. After installing and downloading and installing the included map everything works fine. But then I connect the TyTN II to the PC and the TomTom Home application. The app was searching for updates for the installed TomTom Navigator. It brings up the message that a update is available, it was the "phone database - connect2internet" update. And now that's the strange and very annoying part: After installing the update, the phone doesn't play ANY kind of ringtone on an incoming call and the ringtones are very low.
Neither removing the TomTom app nor doing a soft reset solved the problem. After a masterreset everything was fine again. I installed then all apps needed again and did a backup with Sprite Backup. After this I installed the TomTom Navigator again with the update... same problem! No ringtones on incoming calls. I did then a restore and all was ok again.
Very strange right? Do have any informations/advices about that problem?
Thank you again very much in advance
Best regards
JCD.SAG

Sim fix works great!!

CorruptedSanity said:
Sim fix works great!!
Click to expand...
Click to collapse
What's that?
Best regards
JCD.SAG

When you send an sms and recieve a delivery notification the message says
Message successfuly sent to +9715081233450 instead of message successfully sent to Ahmad AlDhaheri.
The above link fixes it so it says the name (in first last or vice versa), number and even extension (m for mobile, o for office and so on).
Oh I just saw your full post above, apparently you do know what it does. Well now anyone curious also knows.

Bump for a great peice of software.

incorrect time in message center

when i receive a txt message it always shows incorrect time. ex: i receive a txt at 11:45pm and in msg center it shows that i received it at: 7:45pm!! How do i fix this???

fourqui said:
when i receive a txt message it always shows incorrect time. ex: i receive a txt at 11:45pm and in msg center it shows that i received it at: 7:45pm!! How do i fix this???
Click to expand...
Click to collapse
I had this problem with my previous TD1, you can download a cab with microsoft that will fix this issue. the can i used was, "WMDST2008-1".
I remember it stuffing up all of my appts and time with sms..etc...

Tried it and its not working. anybody else has a solution??

OK i found the problem and temporary solution. It seems like the phone is set to GMT so if i set it to my timezone which is GMT-5 the time of my received msg is incorrect. so i set the time to GMT and manually change the time and then it works. But there must be a better solution to fix that problem like a CAB fix or something. If anybody has a fix please share it.

i got the same problem
hey i got the same problem on my TD2
say for example when i send a sms for myself on 12:08 , it will be delivered at 12:00
always 8 mins before the real time .. although that the mobile clock works fine
and i'm using a cooked rom Energy.TOPAZ.29008.Sense2.5.Cookie.2.0.GTX.Mar.08
any help ?

Voicemail issue w/unlocked G1 on AT&T

I've had an unlocked G1 for a while now and its been going great. Calls, wifi, tethering, mms, all of it works just fine.
The only issue I'm having is with my voicemail. When I call the AT&T voicemail number, it says it needs more information from me, it then gives me the option to enter the 10 digit number to leave a message, or press pound to access my voicemail. If I try entering my number to leave a message, it says it isn't set up and cannot leave a message. If I hit pound and try to access my voicemail, it says the mailbox number does not exist.
Anybody know how to fix this issue?

mattbollenbach said:
Anybody know how to fix this issue?
Click to expand...
Click to collapse
Use YouMail. It's really nice, has it's own app and you can personalize messages for everyone in your phonebook.

borodin1 said:
Use It's really nice, has it's own app and you can personalize messages for everyone in your phonebook.
Click to expand...
Click to collapse
Thank you for the reply!
I actually had a friend who had an extra invite for Google Voice, so I got signed up for that and am using it for all of my voicemail needs.

Good to hear that your problem is solved.
Remember to edit the title of your new thread with FIXED or SOLVED so people like me don't stop by just to read that you fixed your own problem.

Error: Invalid Number when texting

From: 1 (121) 611-611
Error invalid number. Please re-send using a valid 10 digit mobile number or valid short code.
Anyone else getting this, and has anyone been able to fix it?
I found a site with people having the issue with the iPhone and ATT, among other carriers. I deleted the conversation thread, deleted the contact, rebooted the phone, re-added the contact with the area code, and it is still trying to send the message without the area code. On a new message I can just add the area code, but when the person answers I hve to delete the thread and start a new one in order to reply. Very annoying and only with one person...

No one is getting this? I know what is going on, the phone is removing the area code when said contact responds to my text messages....there has to be someone else getting this Ive tredeverytging

votum said:
From: 1 (121) 611-611
Error invalid number. Please re-send using a valid 10 digit mobile number or valid short code.
Anyone else getting this, and has anyone been able to fix it?
I found a site with people having the issue with the iPhone and ATT, among other carriers. I deleted the conversation thread, deleted the contact, rebooted the phone, re-added the contact with the area code, and it is still trying to send the message without the area code. On a new message I can just add the area code, but when the person answers I hve to delete the thread and start a new one in order to reply. Very annoying and only with one person...
Click to expand...
Click to collapse
hey im having the same problem, any fix yet? s0o0o0o0o0 annoying.

I am also having this issue. I have tried deleting msgs, contact, rebooting phone, adding contact on the sim and on the phone. I can compose the msg and click the person and it will show 1(XXX)XXX-XXXX and then when i send and go back into the msg it removes the 1(XXX). And leaves the 7 digits. I have had them send me a msg and it will show the complete number but as soon as I go back into the msg it only shows the 7 Digits. I have read that a reset fixes this but surely there is another way. It only does it to one person also.

Seems to be a bug in a particular version of the messaging app, as I had the problem on stock JG6 (?) and not on JM2. I haven't noticed the problem on JM5 (though I haven't used it long) and perhaps it's fixed in JH2? We can only hope!
Sent from my GT-I9000 using XDA App

magicdanw said:
Seems to be a bug in a particular version of the messaging app, as I had the problem on stock JG6 (?) and not on JM2. I haven't noticed the problem on JM5 (though I haven't used it long) and perhaps it's fixed in JH2? We can only hope!
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
none of my contacts have a 1 in front.
try that.

To test this from another phone I created a test contact with my own number in it. Saved it to my sim and left the 1 at front of the number. Sent that contact a text message and it came through correctly. Probably doesn't have an issue with the "1" and more likely another problem with the messaging app.
The only time I've ever received that message is when I've accidentally sent a text message to a contacts land-line instead of their cell.

Have you tried adding a + in front of the 1? So your number would be +1 (xxx) xxx-xxxx.

Yep tried it
pinoymutt said:
Have you tried adding a + in front of the 1? So your number would be +1 (xxx) xxx-xxxx.
Click to expand...
Click to collapse
Yes I actually did try adding the + sign and then 1 and the area code and number and I am still receiving the error message.