Hey guys, I have a problem. I use on Gear screen protector from one of my previous phone One X (nilkin). I cut small square for the gear but after one hour I find out that the screen protector is no there .
So, I was thinking that the screen protector is maybe old and does not work, so yesterday I damaged my second original Samsung Galaxy Note3 screen protector and everything looks okay. But today the screen saver is not there anymore
Any solution? These screensaver should be really good, on my phone always work very well. I am really dissapointed because screen protector from Samsung was not cheap.
I also had the same problem, first I cut one from my old S2, shifted past a few hours. So I order two from a german suplier on ebay specific to the gear, and the same problem past few hours.
The problem is in the glass of the Gear being curved.
Sent from my SM-N9005 using XDA Premium 4 mobile app
I use:
http://www.liquid-kristall.com/en/home/1-0.html
may not be as effective as a plastic one, but it's invisible and it's working so far. Use ot on my note 3 as well.
Sent from my SM-N9005 using XDA Premium HD app
Allure40 said:
I also had the same problem, first I cut one from my old S2, shifted past a few hours. So I order two from a german suplier on ebay specific to the gear, and the same problem past few hours.
The problem is in the glass of the Gear being curved.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So are you without screen protector like me?
For now yes, but I think I will give a try to liquid-kristal, tks for sharing Thelestat . Should give some extra protection, with the advantage of being completely invisible.
I've heard some reports of gear's whith Glass scratched on the wrist. Must be due to some clothes we wear.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Dry screen protectors will fall off. It s meant for straight flush glass only. I just cut out any wet screen Protector and it works well for the glass and metal. Xtremeguard has 80% off their website.
Sent from my SM-P600 using Tapatalk
I purchased screen savers for my Gear from a company selling on Amazon.de. I have had no end of problems trying to convince this company that though the quality of the screen saver is great the point is it will not remain on the Gear, as people above have already mentioned, the body and glass are curved. What happens is the stiffness of the saver results in both ends of the saver sticking up, getting caught on clothes and coming away.
The only solution I can think of is for a manufacturer to produce a thinner protector that will bend to shape and remain stuck to the screen?
The company I purchased from requested photos and goodness knows what. I just filled a claim with Amazon.de and got my money back. I am not going to do the R&D for the company! I bought three of them as in general screen savers can, on times, be a devil to fit.
The glass will and does scratch so take care.
Kind regards.
A good screen protector thread: http://forum.xda-developers.com/showthread.php?p=46707863
Screen Protectors?
Sent from my SM-N900T using xda app-developers app
thelestat said:
I use:
http://www.liquid-kristall.com/en/home/1-0.html
may not be as effective as a plastic one, but it's invisible and it's working so far. Use ot on my note 3 as well.
Sent from my SM-N9005 using XDA Premium HD app
Click to expand...
Click to collapse
Did you apply to the gear camera and the metal frame as well?
I did apply to the camera, did not think to do the metal frame.
If your cutting it out of another type, I found you need to round the edges. the corners that lift up, if the are sharp, will get caught on everything
thelestat said:
I did apply to the camera, did not think to do the metal frame.
Click to expand...
Click to collapse
Any difference to the pictures? as in blurr or smoky? Cos the lens is plastic...not sure if it makes a difference.
I figured i'll be using the Liquid Kristall for the gear.
Since after applying you can't see a layer on the screen....makes one wonder if there is actually any protection on the screen
Related
I just received my iSmooth protectors today, the packaging is really nice and I love the cloth. I am going to install them in a bit and report back. I noticed in the package a little info card and if you post a review of the protector on Amazon and provide all the proof of review and your Amazon order number they send you another set for free with free shipping. I don't recall anyone mentioning this previously so I thought I would share the information. If you e mail them the Amazon order number, Details of the offer can be found here www.iSmooth.com/freepromo you will receive the same item you purchased or you can choose another similar product in their range. Pretty sweet deal, imo, that's 6 protectors and 2 cloths for just under $11
Sent from my SGH-T889 using xda premium
I think I mentioned it before in another post, they include Thank You card with this info. Indeed a very sweet deal, and they just want your honest opinion/review to receive a second set. But as you know, if you don't like the product you will not request for a second set anyway. Btw, did you receive original screen protectors with green cover film or the new ones with a clear cover film?
vectron said:
I think I mentioned it before in another post, they include Thank You card with this info. Indeed a very sweet deal, and they just want your honest opinion/review to receive a second set. But as you know, if you don't like the product you will not request for a second set anyway. Btw, did you receive original screen protectors with green cover film or the new ones with a clear cover film?
Click to expand...
Click to collapse
Green. Damn I will shoot them an e mail for the newer version.
Sent from my SGH-T889 using xda premium
Does it cover most of the screen?
Sent from my SGH-T889 using xda app-developers app
jacky37 said:
Does it cover most of the screen?
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
It's too far from the bottom and not very wide but yeah it covers the usable portion of the screen. I will shoot them an email about the newer version.
Sent from my SGH-T889 using xda premium
Looks like a great deal
Sent from my SCH-I605 using Tapatalk 2
Rhiannon224 said:
It's too far from the bottom and not very wide but yeah it covers the usable portion of the screen. I will shoot them an email about the newer version.
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
How do u know if u have the newer version?
Sent from the TermiNOTEr 2!
There's another thread, a review of the protector and there's pictures. You can see the cut, it's a plainly visual difference in size. Older ones have a green tint on the removable film that you peel off. Newer ones aren't green.
Sent from my SGH-T889 using xda premium
I applied the newer thicker cut and I like these even better. The adhesive is very good on the new ones. You wont be disappointed
Sent From My Galaxy Note 2
Nellyinda803 said:
I applied the newer thicker cut and I like these even better. The adhesive is very good on the new ones. You wont be disappointed
Sent From My Galaxy Note 2
Click to expand...
Click to collapse
Thanks, I already got a reply from Paul and he's sending out a new set. I love the feel and clarity of the protector, I don't like the cut on this one, too much screen exposed. I finally got the tackiness rubbed off and it feels really nice. I pulled off the jlg protector off my mom's phone, the rainbow was really annoying her. Slapped an iSmooth on it, she's happy now.
Sent from my SGH-T889 using xda premium
You gonna love new version. It's on par with Spigen stuff! The width will be similar to green tint ones, but the cutouts around home button and top of the phone are better. It sticks perfectly, crystal clear, no marks from s-pen, no rainbow effects, and very easy to wipe. Not sure if it was just my sample, I did notice some accumulation of fingerprints, but it's so easy to wipe. No different than Spigen oleophobic. The most important, it feels very smooth, not plasticky at all. This clear version is going to be their new screen protector moving forward in a week or so, as told by Paul.
Any chance u could pn me pauls email I just got the old revision of the screen protectors in the mail and I tried with the ismooth support email but got no response
Sent from my SGH-T889 using xda premium
Anyone want to sell me the 2nd set they got for free?
Buy 1 and get 1 set free. Not only are you protecting your device, you are helping put an end to screen saver slavery. Its really an epidemic... thank goodness people are taking action. Thank you.
Sent a long time ago in a galaxy far, far away... nah, nah, nah nah nah naaah nah, nah nah nah naaah nah, nah nah nah naahhhh.
vectron said:
You gonna love new version. It's on par with Spigen stuff! The width will be similar to green tint ones, but the cutouts around home button and top of the phone are better. It sticks perfectly, crystal clear, no marks from s-pen, no rainbow effects, and very easy to wipe. Not sure if it was just my sample, I did notice some accumulation of fingerprints, but it's so easy to wipe. No different than Spigen oleophobic. The most important, it feels very smooth, not plasticky at all. This clear version is going to be their new screen protector moving forward in a week or so, as told by Paul.
Click to expand...
Click to collapse
Are you saying the green tint ones with the ismooth backing and case labeled new version are the old makes?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
greeneon said:
Any chance u could pn me pauls email I just got the old revision of the screen protectors in the mail and I tried with the ismooth support email but got no response
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
I was using whatever support email is at http://ismooth.com/support/
I just know the guy's name is Paul since he replied back to me. Sorry guys, I probably confused a crap out of everybody with my references to "old" versus "new". I just go by how I understood it originally and what others posted in the forum (I think some of those screen protector posts were removed in favor of a new sticky thread?). Just never mind that whole new vs old stuff. I would say order it, and if everything works great and you are happy - then you are done! They give you lifetime guarantee and you will get 2nd set for free with instructions they provide inside of the shipping package. Also keep in mind, everybody has their own opinion and preference. Some like wet install, others dry. Some want tempered glass, others something else. The tricky part with screen protectors, those are not like cases where its easy to try one versus the other, and then you return whatever you like, or keep a few to change it for different occasions, etc. So, if you find one screen protector you like and happy with it - stop driving yourself crazy (i'm speaking from a personal experience) lol!!! Again, just my opinion, so take it with a grain of salt lol!!!
I just got mine are these new cut?
Sent from the TermiNOTEr 2!
borijess said:
I just got mine are these new cut?
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
I just tried these and they are coming up on the left side of the phone.
Sent from the TermiNOTEr 2!
borijess said:
I just tried these and they are coming up on the left side of the phone.
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
You mean coming off the left side of the phone? In general, not just iSmooth, if glass is not clean and/or oily from fingerprints on one side then it might have issues with sticking. Have you tried another screen protector from the pack and do you see the same problem? Make sure you wipe your screen really good. I actually buy one of those eye glass little spray bottles - its amazing how it cleans the screen and even screen protector (it works on both glass and plastic).
From the picture you posted, it looks like the original cut. Paul mentioned only something like 5% of original screens were affected by an issue of not sticking edge. If you remember, Note 2 has a glass that slopes down toward the Home button. That is where the troublesome edge could happen. If you see the second protector doing the same thing, even after you clean the screen, contract them and ask for a replacement new batch.
.... note to myself: check with iSmooth if they are hiring tech support lol!!!
vectron said:
You mean coming off the left side of the phone? In general, not just iSmooth, if glass is not clean and/or oily from fingerprints on one side then it might have issues with sticking. Have you tried another screen protector from the pack and do you see the same problem? Make sure you wipe your screen really good. I actually buy one of those eye glass little spray bottles - its amazing how it cleans the screen and even screen protector (it works on both glass and plastic).
From the picture you posted, it looks like the original cut. Paul mentioned only something like 5% of original screens were affected by an issue of not sticking edge. If you remember, Note 2 has a glass that slopes down toward the Home button. That is where the troublesome edge could happen. If you see the second protector doing the same thing, even after you clean the screen, contract them and ask for a replacement new batch.
.... note to myself: check with iSmooth if they are hiring tech support lol!!!
Click to expand...
Click to collapse
Emailed already they responded with they are going to send me new ones. I went through all three protectors. Same with all three not sticking on left side.
Sent from the TermiNOTEr 2!
Wanted to share, for those who choose to go with a screen protector:
http://www.xtremeguard.com/Samsung-...tors-p/nexus-10-screen-protector.htm?CartID=1
Coupon code: 75OFF
Free shipping (may be US only)
Expiration: Unknown at the moment
The whole site is 75% off, so if you need something your phone, check it out.
Amazon reviews--yeah, the 3 pack may be cheaper in the long run--but if you're looking for just one protector, this may be the way to go. Plus this is direct from XTremeguard, so warranty may be better.
Smeech99 said:
Wanted to share, for those who choose to go with a screen protector:
http://www.xtremeguard.com/Samsung-...tors-p/nexus-10-screen-protector.htm?CartID=1
Coupon code: 75OFF
Free shipping (may be US only)
Expiration: Unknown at the moment
The whole site is 75% off, so if you need something your phone, check it out.
Amazon reviews--yeah, the 3 pack may be cheaper in the long run--but if you're looking for just one protector, this may be the way to go. Plus this is direct from XTremeguard, so warranty may be better.
Click to expand...
Click to collapse
Thanks a lot!!!!! just got one buddy
Thank you, just got one myself.
Sent from my Nexus 10 using XDA Premium HD app
Purchased.. Thanks for sharing. Free international shipping to Malaysia..
Sent from my Nexus 10 using xda app-developers app
What's the general feeling on screen protectors? I've had bad experiences myself using screen protectors for other devices with bubbles and peeling etc. etc. Do most people put these screen guards on their tablets?
Thanks ordered a Nexus 10 screen protector along with a spare Nexus 4 back protector. :victory:
FunkmasterC said:
What's the general feeling on screen protectors? I've had bad experiences myself using screen protectors for other devices with bubbles and peeling etc. etc. Do most people put these screen guards on their tablets?
Click to expand...
Click to collapse
I used to have problem applying dry protectors as you mentioned until I found some excellant advise which made all the difference:
1) Apply the protector in the bathroom after streaming up the room. This removes floating lint from the air.
2) Suggestions for flawless protector application:
a) "the best way to apply without anything left under is to align the screen protector secure it with painters tape over the outside , clean the screen really good, fold the protector back, and before removing the backside film, put painters tape all across covering the screen, and then pull the edges of tape and the back film while pressing the screen protector and sliding down as you pull the tape/back film together towards you until you apply the protector fully and squeegee the bubbles out, you will end up with a flawless screen, because the tape will pull all particles from screen."
b) http://forum.xda-developers.com/showpost.php?p=36632751&postcount=41
c) "I like the masking tape idea for perfect positioning the protector BEFORE even starting to remove the sticky backing. Not so sure about the additional use of tape "put painters tape all across covering" as I think the bathroom stream idea is better."
d) How to apply any screen protector on a iPad 3 like a boss - Very good, watch before applying!!!
https://www.youtube.com/watch?v=zULF22JfjME
I hope these suggestions help.
I'm very happy with my Skinomi, but at 3.75 shipped, hard to pass up as a spare.
Thank you!
Sent from my Nexus 10 using Tapatalk HD
this screen protector is bull**** ); order 2set but unable apply they didn't cut the back piece it whole piece sad
Sent from my Nexus 10 using Tapatalk HD
I just got my 4 in the mail. 1 for the GF's iPad2, two for my son's nexus 7 (yeah, he's a kid...figured we could use the insurance) and one for my N10, as a backup. I already have a Skinomi on it.
The iPad2 and N7 were perfect.
I didn't really look at the N10 for mine, not needed yet.
When you say back piece, do you mean the two holes needed for the FFC and light sensor?
Nope what I mean was they send me the back piece without it been cut.... I should be receiving the piece same as the picture show right?
Sent from my GT-I9300 using Tapatalk 2
angelbesideu said:
Nope what I mean was they send me the back piece without it been cut.... I should be receiving the piece same as the picture show right?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Don't know, I only bought the screen protector, it looks fine.
Sent from my Nexus 10 using Tapatalk HD
dajogejr said:
Don't know, I only bought the screen protector, it looks fine.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
How is the screen protector? I mean do you feel comfortable using the screen with it or is it not worth it... and also, does the image change much with or without the protector? Might be buying one, cheap but if it's useless i won't mind buying it.
lKBZl said:
How is the screen protector? I mean do you feel comfortable using the screen with it or is it not worth it... and also, does the image change much with or without the protector? Might be buying one, cheap but if it's useless i won't mind buying it.
Click to expand...
Click to collapse
Bought it as a spare for my N10. I already have a Skinomi on it.
Bought and installed one on my son's Nexus 7 and my GF's ipad2. They're fine, use lots of spray/soap/water and take your time.
I think the only reason you can get it on normal shipping is because they get very low business rates, even though i still don't think they do it at a very good win for them! It does bring in a lot of business though but doing it internationally would just not be worth the money for them! :highfive:
Who is using them? R they necessary?
Sent from my SM-N900V using xda app-developers app
I'm thinking of getting one
Sent from my SM-N900W8 using Tapatalk
I ordered one from Amazon for 6 bucks.
Sent from my SGH-M919 using Tapatalk 4
You can put a screen protector on your watch face? Interesting...
Sent from my SM-N900V using Tapatalk
I did.
I cut one and adjusted to the size.
Sent from my SM-N9005 using Tapatalk now Free
I did as a precaution. Skinomi off amazon for $2. Cant even tell its there, but gives me a little peace of mind. After getting a scratch on my Motoactv without realizing it, id rather play it safe.
Sent from my SM-N900V using XDA Premium 4 mobile app
Got Mine
I just ordered mine from Amazon. I wear my watch on the inside of my wrist, but have gotten 1 minor scratch, so for $6.00, a little peace of mind. I used to get them for all my phones, but since I keep it in my shirt pocket, it doesn't get as much abuse as my watches do.
firasusman said:
I did.
I cut one and adjusted to the size.
Sent from my SM-N9005 using Tapatalk now Free
Click to expand...
Click to collapse
I like your style. I did the same.
Sent from my SM-N900V using xda app-developers app
Mine arrived through the post today. I cant believe I am going to put a screen saver on a watch
No idea what its going to look like but I cannot imagine its going to improve its aesthetics? I will fit one tomorrow and find out.
chino0131 said:
I did as a precaution. Skinomi off amazon for $2. Cant even tell its there, but gives me a little peace of mind. After getting a scratch on my Motoactv without realizing it, id rather play it safe.
Sent from my SM-N900V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Aren't those wet applications? There's a thread that talks about fog buildup in the lens due to moisture: http://forum.xda-developers.com/showthread.php?t=2477441
Sent from my SGH-T889 using xda app-developers app
I just ordered one of these that include body protection http://www.ebay.com.au/itm/Skinomi-...t=US_Cell_Phone_PDA_Cases&hash=item1e812e366a
, I dont know how durable the watch is yet.
I've been using a screen protector for my gear since the day I got it. Cut out of a large piece that I had for my iPad. What I noticed is that the ones I have seem to have issues with the fact the watch face is slightly curved.
It still works, but might come off after a while. I used a wet application type one as well (best skins ever) and it worked really nicely. You just gotta be careful when the charger cradle is connected to it as there seems to be some pressure exerted and causing the film to bubble upwards sometimes, and eventually causing it to become really ugly.
My thoughts are the best screen protector for the watch would be those sticky type that has some adhesive on it, something like those I used back in my Palm Pilot days.
Bjs051084 said:
I just ordered one of these that include body protection http://www.ebay.com.au/itm/Skinomi-...t=US_Cell_Phone_PDA_Cases&hash=item1e812e366a
, I dont know how durable the watch is yet.
Click to expand...
Click to collapse
Thanks for the information. Can you keep us updated after you have fitted the kit and let us know how it goes?
Many thanks.
namura said:
I've been using a screen protector for my gear since the day I got it. Cut out of a large piece that I had for my iPad. What I noticed is that the ones I have seem to have issues with the fact the watch face is slightly curved.
It still works, but might come off after a while. I used a wet application type one as well (best skins ever) and it worked really nicely. You just gotta be careful when the charger cradle is connected to it as there seems to be some pressure exerted and causing the film to bubble upwards sometimes, and eventually causing it to become really ugly.
My thoughts are the best screen protector for the watch would be those sticky type that has some adhesive on it, something like those I used back in my Palm Pilot days.
Click to expand...
Click to collapse
Can i ask, did the wet application cause any issues with your watch? I saw the full protection version that Skinomi is selling. I think it looks ok, but I also know the watch has issues with moisture.
Sent from my SM-N900T using xda app-developers app
Just fitted my screen saver. Bought from Amazon. Kwmobile. Very good quality, in fact superb but the watch face is curved so is the crystal so the screen saver sticks up at both ends.
Absolute waste of money. I went and bought three of them as I know from years of experience with these things how much they vary in quality and ease of application. I am now stuck with three screen savers that are no good to man nor beast!
Back to the drawing board on this one.
In terms of mobile phones though if Kwmobile make screen protectors for mobiles I would use them, they just dropped a brick with Gear.
Ho-hum.
Bjs051084 said:
I just ordered one of these that include body protection http://www.ebay.com.au/itm/Skinomi-...t=US_Cell_Phone_PDA_Cases&hash=item1e812e366a
, I dont know how durable the watch is yet.
Click to expand...
Click to collapse
That looks nice let us know how it goes please
http://swappa.com/listing/ZZV485/view
note 2 for sale
cherylbaker said:
That looks nice let us know how it goes please
http://swappa.com/listing/ZZV485/view
note 2 for sale
Click to expand...
Click to collapse
No worries can do : ) Has anyone else noticed very very fine scratches on your screen? only visible in the right light and angle, I work in an office and the only thing that has come in contact with my screen is my sleeve, no buttons just material from my business shirt. So i have cut out a screen protector. I noticed the scratches after day 1 of use :S
Tweh said:
Can i ask, did the wet application cause any issues with your watch? I saw the full protection version that Skinomi is selling. I think it looks ok, but I also know the watch has issues with moisture.
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
During the time I used the wet application film on the watch, I did not notice any issue with condensation or problems. The only problem I found was the fact that the charging cradle seem to have really tight tolerances. So the film gets bubbled up every time I charge the phone. Eventually that ruined the film and I reverted back to my home made Spigen. Done properly most people won't know there's something covering the watch. I've got the Spigen covering the front face and wet application film covering all the metal parts
You can see the hair like scratches, is anyone else experiencing the same?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Ah, good idea, never even thought about using a screen protector. .. I have a bunch of unused ones for phones I don't even own anymore, will get the scissors out!
Hi, I'm contemplating buying this phone. I know it's dust-tight but does that mean the electronic internals are, or everything, including the screen? I know Super AMOLED and Super Clear LCD have no air gap so can't get dust under the touch panel but I've seen an S4 Active in the "flesh" and I saw gaps round the bezel of the phone where the glass meets the plastic (like every Samsung I've had) and I worry that dust might get in there and under the touch panel (into the actual LCD). Anyone every had a dust problem with this?
Sent from my GT-I9205 using xda app-developers app
I work at a body shop (very dusty all the time)and can confirm u will not be getting any dust! Main reason for buying I537.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Same here...I drive a truck in a very dusty environment, phone is left in a holder on dash, all day long. So far no dust under screen or under back cover. Ive had phone for 2 months now.
Thanks for your replies Just had another go on one in a phone shop. It's a beauty. I only wish it did slow motion like the S4 But it's waterproof and that's brill!
Sent from my GT-I9205 using xda app-developers app
Do not worry about dust You are safe
Water on the hand.....
DoctorProctor said:
Water on the hand.....
Click to expand...
Click to collapse
Dry your hand then.
Just got a new moto x, put it in my empty pocket for 10 minutes and already have a small hairline scratch. Anyone recommend a good screen protector that offers good protection and feels good to use?
Look up realook, they're on ebay and I think amazon. If you put it on properly you can't even tell it's a screen protector unless you study it real hard. Try putting it on in the bathroom after a hot shower, the steam doesn't allow dust to float around and get stuck under the screen protector as easily.
Sent from my ADR6425LVW using xda app-developers app
trentonmc24 said:
Look up realook, they're on ebay and I think amazon. If you put it on properly you can't even tell it's a screen protector unless you study it real hard. Try putting it on in the bathroom after a hot shower, the steam doesn't allow dust to float around and get stuck under the screen protector as easily.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Ok thanks will check them out
Checked it out, someone said that it covers up the proximity sensor?
"I am a pretty avid Realook customer, you can't beat the quality in my opinion, and I have even evangelised them to my peers.
I have purchased a Realook screen protector for all my screened gadgets. They are very durable, not grippy to the touch like the wet application competetors such as skinomi which leave a wavy ripply finish, and most imnportantly, completely invisible.
Their fit is typically highly precise as well.
However, for the Moto X there is a glaring and disappointing discrepency. Depsite the usual attention to detail from Realook, they have neglected the cut-outs for both the proximity sensor and front-facing camera of the Moto X. This may not affect the camera, but it is a deal breaker for a proximity sensor, rendering it almost inoperable. I was forced to perform my own cut-out before application and the result is less than satisfactory."
It does, which is one of the main reasons I bought it, because the cutout makes it obvious a screen protector is used. I haven't had any issues with it effecting my sensor, however I don't rely on it that heavily so I can't be 100% sure its not effecting it in some way, but it doesn't seem to be.
Sent from my ADR6425LVW using xda app-developers app
Ok thanks
Sent from my XT1060 using xda app-developers app