Related
Hi guyz
I just bought a TyTn II device. I don't know whats gone wrong with it that it is giving me annoying sound when its awake but surprisingly when i turn off the screen the sound goes off. its very annoying just like some bee is there behind..
I wonder if i using some wrong radio 1.65.24.36 with PDACORNER v16ultimate, Hard SPL 3.29[as per the recommendation of cook]. I tried to change the radio but to no avail. it seems its more than that.
i dont know if there is some hardware problem or what. but its really making my experience painful. Kindly suggest your remedies.
come on guyz, hardware techies suggest me what needs to be done, I am really worried with the entire thing. I wish to know if it has been faced by someone or if there is any remedy out there?
sakshamkatyal said:
Hi guyz
I just bought a TyTn II device. I don't know whats gone wrong with it that it is giving me annoying sound when its awake but surprisingly when i turn off the screen the sound goes off. its very annoying just like some bee is there behind..
I wonder if i using some wrong radio 1.65.24.36 with PDACORNER v16ultimate, Hard SPL 3.29[as per the recommendation of cook]. I tried to change the radio but to no avail. it seems its more than that.
i dont know if there is some hardware problem or what. but its really making my experience painful. Kindly suggest your remedies.
Click to expand...
Click to collapse
Here are some simple questions..........
Did this happen right after installing this rom? Did you have the rom on there a while before it started? did you install any other software between installing the rom and when the buzzing noise started?
Have you tried hardresetting ? ( complete wipe and reinstall of current OS )
Have you tried other spl's? ( as the spl controls things on a hardware level?)
Honestly, to me as a hardware tech, it sounds as though its hardware related. I had a backlight inverter on my laptop cause an odd buzzing sound, but ... maybe its not that...
poor I tried to port hard spl 3.56 but to no avail.
I wish if someone else can help me out. This is really getting very difficult for me to listen to calls with this buzz sound in the back. Kindly help me someone. someone said its a problem of moisture but I am not sure if it is. Bro kindly suggest me if it is the case.
Not much any of us can do at this point -- it sounds like a hardware problem.
Send it in for service.
anybody had this problem. Poor the service company is closed for few days.
I hope someone can help me out with his experience. I wonder if the moisture thing is correct.
How about you answer some of those questions. That guy is trying to help you.
ChumleyEX said:
How about you answer some of those questions. That guy is trying to help you.
Click to expand...
Click to collapse
Or he could continue his whining, and get nothing accomplished.
tbrown5175 said:
Or he could continue his whining, and get nothing accomplished.
Click to expand...
Click to collapse
That certainly is an option.
tbrown5175 said:
Or he could continue his whining, and get nothing accomplished.
Click to expand...
Click to collapse
He obviously cannot speak English and is posting through google translate, but still some details would be helpful.
I think the Humming (Bee like noise) is to do with the way the backlight works, try turning the brightness all the way up! It mihgt eliminate it. Mine has always made that noise but since it got replaced (broken usb port) it does not make it as loud much to my relief!
Find some reason to get it replaced
pyraxiate said:
Here are some simple questions..........
Did this happen right after installing this rom? Did you have the rom on there a while before it started? did you install any other software between installing the rom and when the buzzing noise started?
Ans:not specifically as I do Rom flashing every other day & there was no problem after that ever.
Have you tried hardresetting ? ( complete wipe and reinstall of current OS )
Ans:Yes I tried doing that but to no avail.
Have you tried other spl's? ( as the spl controls things on a hardware level?)
Ans: yes i did as i mentioned my last post. but didn't work either.
Honestly, to me as a hardware tech, it sounds as though its hardware related. I had a backlight inverter on my laptop cause an odd buzzing sound, but ... maybe its not that...
Click to expand...
Click to collapse
Thanks mate for your concern.
but do you have any personal experience? or someone in your friend circle had this? i never seen anyone with this annoying problem. some mechanic said its a usual problem of the chip of every flip style phones.
@others
I am afraid if I gave you an impression of being non-english speaker. Kindly stay to the point. I am more concerned about solving my problem rather than showing my english language skills.
Hope some solutions from my friends are on their way.
--edited---
hey chumaleyex,
Brother I am please to see you taking so much interest in this thread but would you care to suggest me something constructive. I am very well proficient with software thing but zero about hardware so felt like asking. But it seems you are more interested in something else but not the issue which I want to get addressed. Kindly give your valuable views so I could see the problems eradicated. The service center of HTC in my city is close for 1week so have to do something with my friends help on xda only.
hope someone I see who had faced this problem or someone in the mechanical field. Thanks allover.
Hello guys, i really need your help!
My phone is so strange now, i have been using Ultimate-X.V9 -21054, but in last days, my phone has gone to white screen some times when i press to screen up sometimes everything is fine, but others not and my phone sometimes dont respond to my touch, and sometimes is a bit slow
Now i have flashed to RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40.02_1.65.17.56_Ship, during the upgrade my phone stay on tree colors, but on computer appeared the status bar! and everythime i turn on my phone now is like 90% is allways white :O i have open my phone, and reconected all again, but the problem still there! im using 3.34 hard spl!
Please someone help meee... i really love my tytn2 is there any way to put this fine? its hard spl problem?
Please help me
Please help meee My phone now is more slow than normal :/
That happened to me a while back, I took it apart several times and checked connections etc. but that did not fix it. I ended up buying a new LCD off of ebay which fixed it perfectly. So, I would suggest doing that (I bought one for 15USD used).
But this to me seems to be a problem on the main board, because the phone sometimes gets really slows And sometimes that white problem appears and others not, like 90% when i need to use my phone
Flash Stock ROM?
Did you flash if back to a OEM ROM? Did it work OK if you left it on the OEM ROM? I have used "Kaiser_HTC_ASIA_HK_WWE_3.34.721.2" as a OEM to upgrade from on many phones that I had upgrade issues with.
i think RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40. 02_1.65.17.56_Ship is an OEM rom isnt? :x
P4k1t0 said:
Hello guys, i really need your help!
My phone is so strange now, i have been using Ultimate-X.V9 -21054, but in last days, my phone has gone to white screen some times when i press to screen up sometimes everything is fine, but others not and my phone sometimes dont respond to my touch, and sometimes is a bit slow
Now i have flashed to RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40.02_1.65.17.56_Ship, during the upgrade my phone stay on tree colors, but on computer appeared the status bar! and everythime i turn on my phone now is like 90% is allways white :O i have open my phone, and reconected all again, but the problem still there! im using 3.34 hard spl!
Please someone help meee... i really love my tytn2 is there any way to put this fine? its hard spl problem?
Please help me
Click to expand...
Click to collapse
did you ask in the proper thread before starting a new one?
msd24200 said:
did you ask in the proper thread before starting a new one?
Click to expand...
Click to collapse
Lolol? and what is the proper thread? --' dont you see this is any rooms i have tried?
P4k1t0 said:
Lolol? and what is the proper thread? --' dont you see this is any rooms i have tried?
Click to expand...
Click to collapse
noticed when searching all your post that you went straight to starting a new thread for this instead of asking in on of the flashing threads. http://forum.xda-developers.com/showthread.php?t=533976
Dude, and in what that link will help in my problem? if search on it, you will find the solution to my problem? the answer is NO, maybe you should read a bit better!
P4k1t0 said:
Dude, and in what that link will help in my problem? if search on it, you will find the solution to my problem? the answer is NO, maybe you should read a bit better!
Click to expand...
Click to collapse
dude the answer is yes go ask in the flashing for newbs thread, or one of the other great links in the thread i posted. maybe you should read better the rules about starting new threads because you are having a flash related problem that needs to be asked in a thread already setup to deal with flash related matters instead of starting a new thread.
have you tried pushing the hard buttons to get into bootloader? do you think MTTY may help your current problem?
msd24200 said:
dude the answer is yes go ask in the flashing for newbs thread, or one of the other great links in the thread i posted. maybe you should read better the rules about starting new threads because you are having a flash related problem that needs to be asked in a thread already setup to deal with flash related matters instead of starting a new thread.
have you tried pushing the hard buttons to get into bootloader? do you think MTTY may help your current problem?
Click to expand...
Click to collapse
Dude i can enter on bootloader yes, can i use my phone yes! but the problem is that sometimes (i mean, like all the time) the screen stay white when i turn it on, and the phone stays slow!!!!
jsgjm said:
Did you flash if back to a OEM ROM? Did it work OK if you left it on the OEM ROM? I have used "Kaiser_HTC_ASIA_HK_WWE_3.34.721.2" as a OEM to upgrade from on many phones that I had upgrade issues with.
Click to expand...
Click to collapse
i have tried that rom too, but nothing the problem is here
It sounds like your Screen is on the way out. I would replace it.
No lets play nice. Or Ill break out the fish heads lol
zelendel said:
It sounds like your Screen is on the way out. I would replace it.
No lets play nice. Or Ill break out the fish heads lol
Click to expand...
Click to collapse
Well, if is about the screen, i can say im safe :x
But one thing on my mind, the white screen i could say to change the screen to one new, but the problem is the kaiser stay a bit slow, and sometimes it dont respond to what i want!
With that stay thinking that the problem is about the mainboard or something like that :s but i hope the problem is the screen, i will buy a new on ebay
The ribbon cable for the digitizer (touch screen) attaches to the LCD, and then both signals feed through the same cable into the D-pad board, so its possible that there is a bad connection somewhere in the LCD/Digitizer assembly that causes it to not sense your inputs, even when the LCD itself is working. Mine just failed completely to a white screen and did not come back. It could be something besides the LCD..try flashing a new HardSPL and/or a different ROM, but if I had to bet, I would bet on the LCD.
zelendel said:
No lets play nice. Or Ill break out the fish heads lol
Click to expand...
Click to collapse
Thankyou made me chuckle
P4k1t0, I know you're frustrated that you phone doesnt work, but do not get uppity at the other forum posters. If you sound off against msd24200 and a mod sees it, its likely to lock your topic.
i had the same situation two weeks back after i flash with my own cooked rom.
what i did is flash the stock rom through SD/storage card and everything is fine.
you already try this method ? you can search on how to flash from SD/storage card
to flash by sd card? ok ok i will try it right now to see
Two nights ago I was watching a video through the YouTube app when suddenly the screen froze up. When it stayed unresponsive for 5 minutes or so, I shut it off by holding the power button down, which seemed to have worked as intended. After that it's become absolutely unresponsive. It will not boot up or turn on whatsoever, nor will the LED light up when plugged into a wall to charge.
The phone was running CM7 and had CWM as recovery, but I'm absolutely stumped as to why it fails to boot up. Has my phone decided to spontaneously brick itself? Is it potentially a hardware fault? Any suggestions would be appreciated. I'll be taking it to a repair center tomorrow, since I've really no choice as of right now.
Yea not really much else you can do besides taking it in for repairs. Maybe remove battery for an hour, although from the sounds of it, it won't do anything.
Nonverbose said:
Yea not really much else you can do besides taking it in for repairs. Maybe remove battery for an hour, although from the sounds of it, it won't do anything.
Click to expand...
Click to collapse
Doesn't seem to work. However an interesting observation, when plugged into the PC, it's detected as QHSUSB_DLOAD. Is it possible my phone's entered some sort of low-level mode? And if that's the case, is there any way to reverse this? I say I held the power button down and it shut off but I may have hit the volume keys in my panic.
So yes, I remain hopeful there's some miracle that will let me get out of this mess.
vr90 said:
Doesn't seem to work. However an interesting observation, when plugged into the PC, it's detected as QHSUSB_DLOAD. Is it possible my phone's entered some sort of low-level mode? And if that's the case, is there any way to reverse this? I say I held the power button down and it shut off but I may have hit the volume keys in my panic.
So yes, I remain hopeful there's some miracle that will let me get out of this mess.
Click to expand...
Click to collapse
This interests me too, I'll be researching all the info I can find, although the first search on qhsusb_dload has come up with a lot of questions and no answers as yet.
Many threads have blamed partitioning the sdcard in cwm recovery as the cause of this.
Did you manage to get any drivers for this qhsusb_dload mode?
Edit: these might be useful. http://www.x-drivers.com/catalog/flash/mobile_phones/companies/qualcomm/models/qpst/12051.html http://forum.xda-developers.com/showpost.php?p=14909282&postcount=19
Progress.
Nonverbose said:
Did you manage to get any drivers for this qhsusb_dload mode?
Click to expand...
Click to collapse
Yeah, I've tried out the QPST software and drivers and believe it or not, an answer to my fears. My phone has entered Download Mode with seemingly no way to exit it. I can't find any posts about this in regards to the Incredible S. I guess nobody's been careless or unlucky enough to get it to this state. See the attached picture. Also I can't help but note all the question about ENTERING download mode as opposed to EXITING download mode. Is it so simple that my brain simply can't comprehend the answer?
unfortunately, its not a simple answer. Probably the best thread concerning this issue is in the sensation forum http://forum.xda-developers.com/showthread.php?t=1468791
Nonverbose said:
unfortunately, its not a simple answer. Probably the best thread concerning this issue is in the sensation forum http://forum.xda-developers.com/showthread.php?t=1468791
Click to expand...
Click to collapse
A dead-end unfortunately. It seems more like a preventative measure than anything. I can't enter diag mode on account of phone being stuck in download mode. I'd like to believe it's hardware related. Anyway, I believe it's time I called the repair centre. I appreciate the help you've given me.
EDIT: Seems like Fonebiz refuses to repair my phone, warranty or no, as it's an overseas model, (even though it's physically the exact same phone, down to the model S710e) short of sending it overseas. Unbelievable. I think I'll go cry in a corner now.
EDIT2: Gave it to a local shop to send for repair. I'll let them figure it out. If anybody has any information on proper use of the Qualcomm Software Download tool, by all means link to me.
Hi all, please help. I changed the motherboard to a new motherboard, the phone does not turn on
And when it is connected to the computer charges the battery and then after a few seconds the screen turns off
And the buttons do not work
What To Do??
UP
I Take A Shoot Of My Problem
http://www.youtube.com/watch?v=_I27OoBY52w&feature=youtu.be
Blurain950 said:
UP
I Take A Shoot Of My Problem
http://www.youtube.com/watch?v=_I27OoBY52w&feature=youtu.be
Click to expand...
Click to collapse
UP
Change the topic from "[Q] Help Me I Have Problem" to something better. Imagine if all topics have this text, you couldn't fine anything...
dcop7 said:
Change the topic from "[Q] Help Me I Have Problem" to something better. Imagine if all topics have this text, you couldn't fine anything...
Click to expand...
Click to collapse
Thanks for the advice
but you know what I need to do to fix my problem??
Hi, so I was just texting with my phone using switkey and the vibration suddenly stopped. No vibration, so I thought it was a normal issue and the vibration would come back after a reboot. The same thing happened to me once, and it was fixed through that. But this time, nothing...It doesn't even vibrate when it boots, recovery mode, nothing. I'm running on Insert Coin and I have had no problem. And I haven't dropped the phone dangerously, I even have an otterbox to ensure its safety. But why did it stop vibrating?Is it a hardware issue? A software issue? Please help. I need the phone fixed by tomorrow, this is really important. I'm selling it to a friend and I need it fixed fast. Please help me.
*#*#3424#*#* dial this no run test for vibration
yatindroid said:
*#*#3424#*#* dial this no run test for vibration
Click to expand...
Click to collapse
I did that and the vibration didn't work.
Ali7000 said:
I did that and the vibration didn't work.
Click to expand...
Click to collapse
should check hardware then
Ali7000 said:
Hi, so I was just texting with my phone using switkey and the vibration suddenly stopped. No vibration, so I thought it was a normal issue and the vibration would come back after a reboot. The same thing happened to me once, and it was fixed through that. But this time, nothing...It doesn't even vibrate when it boots, recovery mode, nothing. I'm running on Insert Coin and I have had no problem. And I haven't dropped the phone dangerously, I even have an otterbox to ensure its safety. But why did it stop vibrating?Is it a hardware issue? A software issue? Please help. I need the phone fixed by tomorrow, this is really important. I'm selling it to a friend and I need it fixed fast. Please help me.
Click to expand...
Click to collapse
If it does not vibrate on boot, it's a hardware fault, sorry.
I had the same, it was repaired in warranty.
If u still have warranty, use it.
Thanks guys, even though I had the vibration issue I still managed to sell it for a good price. I bought the phone off Craigslist so no warranty, and it was rooted so yeah. Thanks anyways guys. I appreciate the help. And especially the first dude who replied. That test mode is gonna prove really useful when buying a phone off Craigslist.