Related
Hi, I have a rooted galaxy tab. I recently just installed a custom rom and after, it doesn't boot anymore? It only stucks at the boot screen. May I know what's the issue here? Is it a brick or something? Any helps appreciated. Tks!
it sounds like a soft brick, which isn't too bad at all Just switch your tab over to Download Mode and then flash another ROM that is confirmed working on your device.
A hard brick would be if your tab didn't power on in any way at all no matter what, and that would be pretty bad :/
Hi, tks for ur reply! Do u mind telling me where to download those roms? Tks once again!
Sent from my HTC Legend using XDA App
bryanqjx said:
Hi, tks for ur reply! Do u mind telling me where to download those roms? Tks once again!
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
espionage724 said:
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
Click to expand...
Click to collapse
Yah, mine is the galaxy tab 7 P1000 as well. But mine is not from the US. It's from Singapore.
Sent from my HTC Legend using XDA App
And I wanna gingerbread rom.
Sent from my HTC Legend using XDA App
espionage724 said:
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
Click to expand...
Click to collapse
Hi! I managed to get my rom on samfirmware.com and even flashed it via odin. But one thing, it managed to go the boot screen but then it doesn't move at the "samsung" glowing screen after that. Did I do anything wrong?
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
priyana said:
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
K. I also came across this roto JME pre-rooted firmware v4. Will this work as well?
Sent from my HTC Legend using XDA App
You need dbdata.rfs
bryanqjx said:
Hi! I managed to get my rom on samfirmware.com and even flashed it via odin. But one thing, it managed to go the boot screen but then it doesn't move at the "samsung" glowing screen after that. Did I do anything wrong?
Click to expand...
Click to collapse
You may have a corrupted /dbdata. If that's true, no matter how many new ROMs or firmwares you install, it won't help you.
This should take care of your problem:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121
yappoe said:
You may have a corrupted /dbdata. If that's true, no matter how many new ROMs or firmwares you install, it won't help you.
This should take care of your problem:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121
Click to expand...
Click to collapse
I tried using the dbdata before. But it still doesn't work.
Sent from my HTC Legend using XDA
I have the same problem before when i was flsshing back to the original rom. But i set my tab to download mode and flash it into a new rom then everything is settle. Btw, am using OC 4.1.0 rom running on 2.3.6! Try it.
Sent from my GT-P1000 using xda premium
priyana said:
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Hi! Tks for your advice. I just read through the restocking steps on the teamovercome.net. But I've got a question. Is it compulsory to actually install the overcome kernel and rom?
Izachii said:
I have the same problem before when i was flsshing back to the original rom. But i set my tab to download mode and flash it into a new rom then everything is settle. Btw, am using OC 4.1.0 rom running on 2.3.6! Try it.
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
Did you flash the overcome rom?
bryanqjx said:
Hi! Tks for your advice. I just read through the restocking steps on the teamovercome.net. But I've got a question. Is it compulsory to actually install the overcome kernel and rom?
Click to expand...
Click to collapse
I installed overcome kernel with many other rom before moving to redpill (because of bluetooth keyboard compatibility). It works great with most of rom 2.3.3 and 2.3.6 base. Don't hesitate to try the kernel with other rom.
Btw, did you try pushing new pit file through odin?
yappoe said:
I installed overcome kernel with many other rom before moving to redpill (because of bluetooth keyboard compatibility). It works great with most of rom 2.3.3 and 2.3.6 base. Don't hesitate to try the kernel with other rom.
Btw, did you try pushing new pit file through odin?
Click to expand...
Click to collapse
I haven't tried this process yet cause I am curious whether if its necessary to flash the kernel and the rom. But since its good, I will try it later! Tks btw.
Sent from my HTC Legend using XDA
Hello everyone,
I am new in rooting and installing custom rom in galaxy tab.
Here's my device:
gingerbread 2.3.3 build gingerbread DXJPI
kernel version: 2.6.35.7 [email protected]#2
baseband: P1000DXJPE
I would like to ask how to safely root and install custom rom?
I have this guide which I got from here but Im confused if I can use this to my tab.
http://www.teamovercome.net/p1000/?page_id=17
If that is compatible to my tab, how do I root before installing the rom or the GB-stock-safe_v5.zip and its component should root the device automatically?
thanks.
Yes, it is compatible with ur tab, mine is like yours. Come from dxjpi 2.3.3 too. If u wanna root, just install the overcome kernel with odin. After that, u have rooted ur tab. And u can install other custom rom.
Sent from my GT-P1000 using XDA
Hi Pati.
Thanks for your advised. Yes I think the reason that we have same build id is that we are in asian and i bought mine in vietnam.
so i should follow the step by step procedures on that link and everything will be alright?
im excited to root and install custom rom on my device.
caH_Pati said:
Yes, it is compatible with ur tab, mine is like yours. Come from dxjpi 2.3.3 too. If u wanna root, just install the overcome kernel with odin. After that, u have rooted ur tab. And u can install other custom rom.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Yes, just follow the guide exactly and ur tab will be fine.
Sent from my GT-P1000 using XDA
caH_Pati said:
Yes, just follow the guide exactly and ur tab will be fine.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Thanks bro.
Sent from my GT-P1000 using XDA
Hi, does re-partition automatically selected once there is a pit file? is it safe to enable re-partition?
by the way once everything is installed, can i load other roms like cm9 or aokp?
thanks.
caH_Pati said:
Yes, just follow the guide exactly and ur tab will be fine.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Hey guys, my friend has a i900 running 2.2.1 froyo. He hates how it is always freezing and wants me to root it and put CM9 on it. I swapped sim cards with him and did a nandroid on mine so i can restore after. So i have his phone
I was wondering is the process to get Cm9 running is the same as coming from gingerbread.(thats what my phone came with 2.3.4)
On mine i:
Flashed CF root with ODIN,
Booted into recovery and flashes Cm9 and an approprite kernel.
Just wondering if i can follow the same procedure as before. Help is appreciated, i dont want to mess this up.
Thanks.
Just upgrade to gingerbread using Odin...root with appropriate kernel using Odin...flash latest cm9 nightly in cwm...check out slim 4.1 as well.
http://forum.xda-developers.com/showthread.php?p=14273101
http://forum.xda-developers.com/showthread.php?p=14481782
http://forum.xda-developers.com/showthread.php?p=24673062
http://forum.xda-developers.com/showthread.php?p=15443678
http://forum.xda-developers.com/showthread.php?p=22334777
×Slim Rom×
Whats the point in going to gingerbread if i am going to ics?
All i need is recovery mode anyway.
Just wondering
Sent from my GT-I9000M using xda app-developers app
I don't believe you can go to Cm9 from froyo...you maybe right but all the info you need is in the links I provided. I'm sure you'll find you're answer in the cm9 thread.
I gave it a quick look and it doesn't mention gingerbread. But if it were me I would since it might be more difficult to dig up a kernel for froyo
×Slim Rom×
vanisleryan said:
I don't believe you can go to Cm9 from froyo...you maybe right but all the info you need is in the links I provided. I'm sure you'll find you're answer in the cm9 thread.
I gave it a quick look and it doesn't mention gingerbread. But if it were me I would since it might be more difficult to dig up a kernel for froyo
×Slim Rom×
Click to expand...
Click to collapse
I don't actually need the kernel to boot though. I just a recovery to flash the Rom. Would that work?
Sent from my GT-I9000M using xda app-developers app
AlwaysDroid said:
I don't actually need the kernel to boot though. I just a recovery to flash the Rom. Would that work?
Sent from my GT-I9000M using xda app-developers app
Click to expand...
Click to collapse
You need gb bootloader to get onto cm9, as far as I'm aware, hence the need
Sent from my GT-I9000 using xda premium
slaphead20 said:
You need gb bootloader to get onto cm9, as far as I'm aware, hence the need
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Ah that makes sense, thank you very much! So the one package file from samfirmware.com will also replace the bootloader? I hope it works, i dont want to brick this lol.
AlwaysDroid said:
Hey guys, my friend has a i900 running 2.2.1 froyo. He hates how it is always freezing and wants me to root it and put CM9 on it. I swapped sim cards with him and did a nandroid on mine so i can restore after. So i have his phone
I was wondering is the process to get Cm9 running is the same as coming from gingerbread.(thats what my phone came with 2.3.4)
On mine i:
Flashed CF root with ODIN,
Booted into recovery and flashes Cm9 and an approprite kernel.
Just wondering if i can follow the same procedure as before. Help is appreciated, i dont want to mess this up.
Thanks.
Click to expand...
Click to collapse
I see you have an i9000m and on Virgin - franchisee of Bell.
Follow these instructions
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version
Branch off to whatever ICS rom you want.
You'll definitely need to be using the cm7-kg3 modem for any ICS rom going forward. That means after every new ROM flash you'll have to flash the KG3 modem. Once you are upgrading within a ROM, you won't have to re-flash the modem each time.
If you use a firmware from the first link I gave you there are firmware. with bootloaders.
The links contain everything you need...firmware....kernel to get cwm....Cm9....and radio zip
×Slim Rom×
Thanks guys, im going for it pretty soon here. You guys are awesome.
For the first time in my life, kies just connected to a phone. I cant handle it. I think im gonna pass out in disbelieve.
Anyway... lol.
Can i just update to gingerbread kg3 from kies?
Yes, but you may have a difficult time finding a kernel with cwm for kg3.
×Slim Rom×
and now i cant get into recovery mode. Just download mode. I downloaded the stock firmware from samfirmware, and was gonna flash it with odin, but which file to i put it under? Its just a single tar ball
EDIT: For some reason i have to use power volume up AND down and home. Wierd.
I always use firmware from the link I gave you...just flash jw5 from link with 512 pit....then root with semaphore 2.7.4.tar from second link....easy.
×Slim Rom×
I will try that now. Cause im bootlooping with CF root.
After that you can flash cm9 in cwm...additionally slim 4.1...then slim common....then the Kg3 modem zip in cwm as well.
×Slim Rom×
vanisleryan said:
After that you can flash cm9 in cwm...additionally slim 4.1...then slim common....then the Kg3 modem zip in cwm as well.
×Slim Rom×
Click to expand...
Click to collapse
Thank you very much sir for all your help. He is up and running slim
Couldnt have done it without you, thanks a ton!!!
The lightning launcher is a little different... If he doesn't like it I recommend apex or nova launcher...enjoy, it's a great ROM.
×Slim Rom×
Slim 4.2
was happy that you went through the process fine. Slim 4.2 is out now
I gave it back to him and he is getting sleep of death. He was using CPU settings of 1000max 100min W/ Lulzactive governor
I have never had this so, Anyone know how to fix this?
Sent from my GT-I9000 using xda app-developers app
Hi all,
I own a Galaxy Tab P1000 bought in UK and not sim locked.
I bought it in Carphone Warehouse.
Now I wonder if I can install ICS on my Tab.
I know nothing about kernels in general so please do not come up with install this kernel, that kernel.
I have a stock 2.3.3 ROM updated via Kies and I rooted it.
I just want to keep all my features working on my Tab (camera, data, voice and so on) after the upgrade so I am not interested if some stuff is not working.
If these requirements are met I wish you could come up with an upgrade procedure for dummies with the link to all files needed.
Again I know nothing about kernels so please try to explain what I am gonna do.
Thanks in advance,
Regards,
Federico.
Well, too bad.
Samsung won't make ICS for this tab, so no L
kies update for you.
And yeah, we all will tell you to install a kernel+cwm to flash it.
And no spoon feeding either...
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread JQ1
You can continue with the rest, and you will get Overcome 4.1 and you won't regret.
From there you can then try AOKP or CM9, all requires you to have Overcome Kernel with its CWM recovery to flash.
Links are easy to find in their individual thread.
Come back here after you have overcome rom, come back here and I am willing to guide you further.
Sent from my GT-P1000 using xda app-developers app
The 2 roms you are talking about have all features working?
Sent from my GT-P1000 using xda premium
Camera, data, voice call
Yes, both cm9 and AOKP can do that.
Sent from my GT-P1000 using xda app-developers app
I am reading some information. It looks like there are stability problems with custom roms. Endless loops with one. Wifi disconnecting on the other. When I was using a sony ericsson x10 I used to install custom roms. Just all had bugs and I always went back to stock. Thing is that the tab is more complicated and I am not willing to brick it either.
Sent from my GT-P1000 using xda premium
P.S. Cwm is already installed on my tab. Just not the kernel.
Sent from my GT-P1000 using xda premium
You need cwm 5.x to be successful I think.
Btw, gtab is quite hard to brick, as long as you didn't screw up the boot loader.
Sent from my GT-P1000 using xda app-developers app
Steps should be to:
- Install GB-stock-safe-v5.zip (Odin) (I have 1.85 is that ok?)
- Install Overcome 4.0.0 Kernel (Odin) (I have 1.85 is that ok?)
- Install Overcome 4.1 ROM wipe (via CWM, should I use wipe or no wipe?)
Once I am done with that I can use CWM to install an ICS ROM if I wish.
I think I got this correctly didn't I?
Ok, I am now lost about which specific ROM to try. CM seems more stable but is there any specific release (more stable) that I should be looking for? Could anyone please link a post to a stable ICS CM release for my tab?
Hello, I have been reading for a long time now on threads all over this forum and there is simply too much for me to take in. So I thought maybe I could ask for help and one of you clever people could help me.
I would like to update the firmware on my tesco samsung tab gt-p1000 wifi and 3g to anything 4.+ oh and suitable for the uk. I'd like to still be able to make calls, use gps text and wifi general stuff. If some one in the know could suggest all the downloads I would need and point me towards a guide that suits those I would be very greatfull. p.s I think the tablet has been messed about with before as it has no serial number but I don't know.
Please don't just post ''read this thread'' I'm asking for some one how knows this information and just say ''use the modem LINK, this rom LINK, this software LINK and follow this guide LINK or similar.
From my research there are other people looking for the same build. If there is already one out there. link me up please.
I maybe looking for a complete odin build !
currently firmware is 2.2, baseband version 2.6.32.9 [email protected] #1 , FROYO.XWJJ3
There won't be an odin build of any custom rom for p1000
Sent from my GT-N7100 using xda app-developers app
tar
priyana said:
There won't be an odin build of any custom rom for p1000
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Thanks for letting me know that.
So how will I do it?
You can follow my signature to overcome method.
Your have froyo, so you must root your ROM to enable you to check if you have protected bootloader.
And if you do, then to patch it.
Gingerbread doesn't have such issue.
But all that is in overcome PDF guide.
Once you have overcome kernel, it gave you cwm recovery.
With that you flash custom ROM.
Sent from my GT-P1000 using xda app-developers app