hello to all. I have a root z1 without completely original but my problem is that most will not turn on if I connect it to the PC remains the led light turned red.
I tried flashtool Please install and when I connect the phone and tells me that in fastboot mode and you turn on the blue LED on the phone.
How can I fix?
I also tried a hard reset but nothing ADouble.
Thank you all
Leave it on charge for a few hours, then press volume DOWN to get into flashmode
You are pressing volume UP which goes to fastboot mode
gregbradley said:
Leave it on charge for a few hours, then press volume DOWN to get into flashmode
You are pressing volume UP which goes to fastboot mode
Click to expand...
Click to collapse
I've already tried and enters mode fastmode but how do I flash kernel and rom if you do not even enter into recovery. I do not even root ...
DiabloBasic said:
I've already tried and enters mode fastmode but how do I flash kernel and rom if you do not even enter into recovery. I do not even root ...
Click to expand...
Click to collapse
You cant.
Use pccompanion to force a repair on your phone.
Download pccompanion from sony website
gregbradley said:
You cant.
Use pccompanion to force a repair on your phone.
Download pccompanion from sony website
Click to expand...
Click to collapse
I installed pc companion but I do not detect my phone. but on flashtool you ...
on flashtool you flash a stock ftf.
press volume down to enter flashmode and flash it.
Related
could I have lost this after a failed attempt at getting into flashmode? And how to get it back? PCC or flashtool doesn't see the phone. USB charge works in MSC mode but still PCC and flashtool cannot see the phone. I've hit the little red button but no change. So I can't see away of flashing or updating via PCC until this is resolved.
nimekuwa said:
could I have lost this after a failed attempt at getting into flashmode? And how to get it back? PCC or flashtool doesn't see the phone. USB charge works in MSC mode but still PCC and flashtool cannot see the phone. I've hit the little red button but no change. So I can't see away of flashing or updating via PCC until this is resolved.
Click to expand...
Click to collapse
Try going into flashmode this way.
Hold volume down button, attach usb cable, keep volume down button pressed and then press and hold the power button until something happens (LED blink or vibrate) then let go of all buttons.
I had to do that on my Xperia T because getting into flashmode the normal way didn't work
gregbradley said:
Try going into flashmode this way.
Hold volume down button, attach usb cable, keep volume down button pressed and then press and hold the power button until something happens (LED blink or vibrate) then let go of all buttons.
I had to do that on my Xperia T because getting into flashmode the normal way didn't work
Click to expand...
Click to collapse
Thanks for the suggestion but it didn't appear to make any difference but something I realised is that I might have been holding the volume - fir too long. Also the green LED indicating flashmode doesn't stay on just flashes briefly. Still I was able to get PCC to see the flashmode and 'repair' it but it has made no difference. In USB mode MTP the battery is not charging hen connected to a PC and is when connected in MSC mode. I realise it is not hugely important but it would be nice to have it working the way it as two days ago PCC doesn't recognise the phone nor Media Go; maybe it is pc driver issue though I have uninstalled and reinstalled the pcc software.
Install flashtool and run the drivers.exe from the driver folder in the instalation folder of flashtool. Choose flashmode and fastboot drivers
Sent from my C6903 using xda premium
gregbradley said:
Install flashtool and run the drivers.exe from the driver folder in the instalation folder of flashtool. Choose flashmode and fastboot drivers
Sent from my C6903 using xda premium
Click to expand...
Click to collapse
Thanks, tried this and it didn't make any difference. I have same software installed at work and all works no problem so the setup on my home laptop is obviously not quite right so will do a complete wipe as best I can of software and try again.
Well I explain you my problem.
Since I installed last saturday the last 4.3 ROM thanks to Doomlord, I noticed my phone doesn´t charge while in power off, it just doesn´t respond to the cable charger, I tried with several cables, wall chargers, via PC,... with no result, also looking for a solution I also noticed it doesn´t also respond to comands with volume buttons so it can not boot to flashmode and fastboot using the normal way.
booting to flashmode or Flashmode is not an issue as I found a way of doing it actually a couple of them, I will explain them just in case somebody is in a similar problem than me...
Via software Using flashtool (flash/fastboot) the aplication can force the phone to boot in fastboot via adb, using PCcompanion, (flash/repair) when it checks the phone after downlodaing the firmware it forces the phone to reboot in flashmode (in my case it doesn´t it just powers off and gets stucked but just pressing the power button it does, once booted in flashmode you can open flashtool and flash the desired ROM)
Via Hardware As I said it doesn´t respond when I plug in the cable but with the cable connected to the computer and pressing volume UP/down and power until it vibrates it will boot to flashmode or fastboot.
Now lets go back to my main problem...
I have being doing several things in order to solve it with no luck...
1º flash .278 kernel with recovery thanks to sj8023ld
2º Downgrade to .145 Xperiment custom ROM
3º Downgrade to .141 oficial using flashtool (result bootloader allowed: no" when it was unlocked before)
4º Flash again .141 with flashtool (bootloader again unlocked)
5º relock bootloader and flash with PCcompanion (flash/repair)
6ºFlash .145 oficial using Flashtool
7º Unlock bootloader, Root (easyrooting toolkit Doomlord) and CWM V9 by davidmarco.
Now I am again in 4.3 leaked with root and .278 kernel
After doing all this I couldn´t find a solution, Do you know guys if I can do anything else?
Thanks a lot for your help in advance
All i can get u flashed a rom
u cant accses flashmod nor fastboot
is this is right ?
If so i think u have a problem smiler to mine
let me know
iSpammer said:
All i can get u flashed a rom
u cant accses flashmod nor fastboot
is this is right ?
If so i think u have a problem smiler to mine
let me know
Click to expand...
Click to collapse
How did you solve your problem?
Thanks
onomico said:
How did you solve your problem?
Thanks
Click to expand...
Click to collapse
mine didnt got soloved but i know the software to use to solove it i just want to know
if ur xv dosnt get in fastboot neither on flashmode ? Is ur xv get detected on ur pc under the name qhsusb_dload ? If so tell me so we may can help each other
iSpammer said:
mine didnt got soloved but i know the software to use to solove it i just want to know
if ur xv dosnt get in fastboot neither on flashmode ? Is ur xv get detected on ur pc under the name qhsusb_dload ? If so tell me so we may can help each other
Click to expand...
Click to collapse
No, sorry, when powered on it is recognized as normal and on power off it is not detected at all
I have problems in my stock fw with charging while powered off. Does not at all, quite the inconvenience. However if you hold the power button my charge light comes on until my phone has enough juice to power up (well it doesn't have enough juice ever, but I quickly put into airplane mode till it charges a but more...)
Sent from my LT30a
Hi, i have a big probleme with my phone Xperia z c6603 lollipop 5.0.2 :i had installed the program * xzrecovery* for lunching the xposed frimware then the *xzrecovery* reboot my phone...it keeps restarting in sony logo........i try to hold the Volume Up +Volume Down buttons+ power bouttons but no result .....i can't connect my phone with Pc via USB cable because i have hardware problem....
...... after an hour of restarts, my battery is completely drained....when i connect with a wall charger automatically turn on and keeps restarting in sony logo the problem is turn on automatically and don"t be charged ?????????????
whene i press and hold power & volume up for few seconds, the xperia vibrate for 3 times and turn off then keeps restarting
im very tired with this problem please help meeeee.....
sorry my english is very bad.....
moad islam said:
Hi, i have a big probleme with my phone Xperia z c6603 lollipop 5.0.2 :i had installed the program * xzrecovery* for lunching the xposed frimware then the *xzrecovery* reboot my phone...it keeps restarting in sony logo........i try to hold the Volume Up +Volume Down buttons+ power bouttons but no result .....i can't connect my phone with Pc via USB cable because i have hardware problem....
...... after an hour of restarts, my battery is completely drained....when i connect with a wall charger automatically turn on and keeps restarting in sony logo the problem is turn on automatically and don"t be charged ?????????????
whene i press and hold power & volume up for few seconds, the xperia vibrate for 3 times and turn off then keeps restarting
im very tired with this problem please help meeeee.....
sorry my english is very bad.....
Click to expand...
Click to collapse
Your phone is bricked bro. You have to do some steps to resolve this.
1. Download flashtool & stock ftf file of sony c6603.
2. Install the flashtool on your computer and install the drivers which you can find in flashtool folder in c:/ partition of your computer. Note- disable signature verification before installation of drivers.
3. Now turn off your phoneandd open the flashtool and select flash via flashmode and select ftf file. Note- place ftf file in firmware folder of flashtool present in partition c:/.
4. Now click flash and wait for some time it will trll you to connect the phone.
5. Now press your vol down button constantly and connect to pc via usb. It may or may not show green led but you can check the flashtool showing device connected in flashmode.
6. Wait for 5-10 minutes it will say dettach your device and congrats you have your phone back.
Ess Arr said:
Your phone is bricked bro. You have to do some steps to resolve this.
1. Download flashtool & stock ftf file of sony c6603.
2. Install the flashtool on your computer and install the drivers which you can find in flashtool folder in c:/ partition of your computer. Note- disable signature verification before installation of drivers.
3. Now turn off your phoneandd open the flashtool and select flash via flashmode and select ftf file. Note- place ftf file in firmware folder of flashtool present in partition c:/.
4. Now click flash and wait for some time it will trll you to connect the phone.
5. Now press your vol down button constantly and connect to pc via usb. It may or may not show green led but you can check the flashtool showing device connected in flashmode.
6. Wait for 5-10 minutes it will say dettach your device and congrats you have your phone back.
Click to expand...
Click to collapse
thank u Ess Arr for help...
my battery is completely drained...and i tried to charge my Xperia for 4 hours it does't be charged.....
so whene i use flashtool to fix it will i find problem....
Hello updated now the phone has a red flashing light and when i click the volume up and power button the phone vibrates for 3 time and then nothing happens and i tried charging it and it just keeps rebooting and ending up not charging at all. How do i fix this?
Hi
Hi,download and install c6906 stock (ftf) rom via flashtool on your phone
baku_boy_97 said:
Hi,download and install c6906 stock (ftf) rom via flashtool on your phone
Click to expand...
Click to collapse
the phone is not turning on completely and i cant access fastboot or flashmode.
last night the phone decided to work again but then this morning after charging it to 100% the phone is stuck on a green light now and nothing else happenes tried all the volumepressing and reset button nothing helps
Shut down your phone and now Press volume down button and Connect your phone on your computer and now your phone connected in flashmode then flash any stock c6906 ftf rom via flashtool and your problem will fixed now
But before you must install flashmode and other drivers from c: flashtool /drivers (look like this)
baku_boy_97 said:
Shut down your phone and now Press volume down button and Connect your phone on your computer and now your phone connected in flashmode then flash any stock c6906 ftf rom via flashtool and your problem will fixed now
But before you must install flashmode and other drivers from c: flashtool /drivers (look like this)
Click to expand...
Click to collapse
I fixed my issue thanks for the help
Thanks you too
I used FlashTool to flash Sony Z3+ E6553 and now phone cannot power on at all. When I plug in to PC, PC can detect but flashtool cannot flash anymore. The phone was working fine, only has phone lock. Please help revise the phone. Thanks.
citifone said:
I used FlashTool to flash Sony Z3+ E6553 and now phone cannot power on at all. When I plug in to PC, PC can detect but flashtool cannot flash anymore. The phone was working fine, only has phone lock. Please help revise the phone. Thanks.
Click to expand...
Click to collapse
Are you sure that your battery is charged?
Try this: press and hold power and volume up button for 10 seconds and see does the phone vibrate.If vibrate flash again via flashtool.,he should works.
Allek84 said:
Are you sure that your battery is charged?
Try this: press and hold power and volume up button for 10 seconds and see does the phone vibrate.If vibrate flash again via flashtool.,he should works.
Click to expand...
Click to collapse
Battery was fully charged and I've tried that but phone does not response at all to flashtool. When plug in to PC, in device manager under USB controllers, it sees it as SOMC Flash Drive. I think the phone boot is dead.
citifone said:
Battery was fully charged and I've tried that but phone does not response at all to flashtool. When plug in to PC, in device manager under USB controllers, it sees it as SOMC Flash Drive. I think the phone boot is dead.
Click to expand...
Click to collapse
Listen,start flashtool again and hit flash and when pop up windows show press and hold volume down button and connect phone to cable.It should to install so called s1 boot driver(SEMC flash device)Do like I said and see what happends when you connect phone to cable.
If pc install any driver start flashtool again and try to flash again.
Before everything,try to press and hold power and volume up buttoins for more time,about 15 seconds and see did he vibrate.
Allek84 said:
Listen,start flashtool again and hit flash and when pop up windows show press and hold volume down button and connect phone to cable.It should to install so called s1 boot driver(SEMC flash device)Do like I said and see what happends when you connect phone to cable.
If pc install any driver start flashtool again and try to flash again.
Before everything,try to press and hold power and volume up buttoins for more time,about 15 seconds and see did he vibrate.
Click to expand...
Click to collapse
Thanks for your help...The phone was flashed successfully with flash tool with flash file E6553_28.0.A.4.8. After flash done, phone was dead, cannot power on anymore. Now when I tried to flash it again, volume down, insert USB the flashtool show as: Device detected with USB debugging off. It doesn't go to flash mode anymore. I took the back cover off, remove battery connector flex cable and connect it back and try flashing many times but flashtool will not detect phone in flash mode..PC can detect phone because it makes connecting sound on PC but detects as what mode I don't know. In device manager, it doesn't show any device in com port but it shows SOMC Flash Device in USB controllers. I tried to press volume up + power but nothing happened. Once again thanks for your help.
somc flash device means dead boot....its no solution yet for it,sorry
this guy or website promise to repair this dead boot problem via test point look here:
ht_tp://www.vungoc-mobile.com/index.php/unlock/932-repair-boot-unbrick-sony-e6553-xperia-z3
or here
http://www.vungoc-mobile.com/index.php/unlock/932-repair-boot-unbrick-sony-e6553-xperia-z3
citifone said:
Thanks for your help...The phone was flashed successfully with flash tool with flash file E6553_28.0.A.4.8. After flash done, phone was dead, cannot power on anymore. Now when I tried to flash it again, volume down, insert USB the flashtool show as: Device detected with USB debugging off. It doesn't go to flash mode anymore. I took the back cover off, remove battery connector flex cable and connect it back and try flashing many times but flashtool will not detect phone in flash mode..PC can detect phone because it makes connecting sound on PC but detects as what mode I don't know. In device manager, it doesn't show any device in com port but it shows SOMC Flash Device in USB controllers. I tried to press volume up + power but nothing happened. Once again thanks for your help.
Click to expand...
Click to collapse
As I understood, you tried to downgrade. Am I right? I heard that sometimes downgrading causes hard brick. I don't know how to fix it but only option is bringing service.
sone xperia z3+ (E6553) flash after dead
sone xperia z3+ (E6553) flash after dead
sony xperia z3+ e6553 model
flash with this model e6653
it does not start after with it
please help me sir