tasker - Samsung Galaxy Gear

Hi all
there's a way to use tasker with galaxy gear?

Search?
_____
Sent from my GT-i9505 using xda premium

cinmic said:
Hi all
there's a way to use tasker with galaxy gear?
Click to expand...
Click to collapse
Currently no. If someone can remove the Google Play Licensing Validation, then we could push Tasker. There's an apk called "Lucky Patcher" that removes those sort of validations from apps (probably not legal in the slightest). However, Tasker is one of few that are considerably hard to emulate a paid purchase, causing Lucky Patcher to have no effect. So, no, not currently, but I'm working on removing that restriction and testing.

CWeaver34 said:
Currently no. If someone can remove the Google Play Licensing Validation, then we could push Tasker. There's an apk called "Lucky Patcher" that removes those sort of validations from apps (probably not legal in the slightest). However, Tasker is one of few that are considerably hard to emulate a paid purchase, causing Lucky Patcher to have no effect. So, no, not currently, but I'm working on removing that restriction and testing.
Click to expand...
Click to collapse
Thank's,
there's a way to use it like a bluetooth microphone to use it with autovoice ?

cinmic said:
Thank's,
there's a way to use it like a bluetooth microphone to use it with autovoice ?
Click to expand...
Click to collapse
You're phone, by default, should detect your watch as a media headset or something similar. So, you should be able to use your watch in AutoVoice/Tasker on your phone as a microphone

CWeaver34 said:
You're phone, by default, should detect your watch as a media headset or something similar. So, you should be able to use your watch in AutoVoice/Tasker on your phone as a microphone
Click to expand...
Click to collapse
But I need an app on the watch that start the auotovoice recognize on the phone, for example if I tap twice the power button on the watch it open the microphone and pass my voice to autovoice on the phone.

cinmic said:
But I need an app on the watch that start the auotovoice recognize on the phone, for example if I tap twice the power button on the watch it open the microphone and pass my voice to autovoice on the phone.
Click to expand...
Click to collapse
Were all waiting for this, SDK hasn't been released yet from my knowledge.
Going to have to be patient like everyone else.

Related

Tasker (And AutoRemote)

Anyone sideload these 2 apps yet? Especially now that Autoremote allows direct communication via BlueTooth...
nikkobenson said:
Anyone sideload these 2 apps yet? Especially now that Autoremote allows direct communication via BlueTooth...
Click to expand...
Click to collapse
Way ahead of you, except tasker won't install. Failure [INSTALL_FAILED_MISSING_SHARED_LIBRARY]
I got Locale installed but it seems to crash when I try to add conditions.
Llama seem to work, it seems I can at least change volumes based on times of days, its a start. Not sure what profiles I would need with a watch but Llama might be the best bet right now
dipole said:
Way ahead of you, except tasker won't install. Failure [INSTALL_FAILED_MISSING_SHARED_LIBRARY]
I got Locale installed but it seems to crash when I try to add conditions.
Click to expand...
Click to collapse
Damn.
autoremote
nikkobenson said:
Damn.
Click to expand...
Click to collapse
Okay I am wondering how to connect other devices? I know wrong place to
ask but am asking anyway?
I have not had problems installing autoapps just can't get other devices to connect or see it on search of nearby devices?

Pairing Gear bluetooth with iPhone / iPod

Anyone tried this? My goal is basically to make the Gear compatible with iOS devices.
It works from a high level - it says they're connected (and doesn't disconnect), but I haven't deployed any apps yet that communicate properly with an iPhone.
The BLE APIs are 4.3 (API 18) and the Gear is 4.2 (API 17), so I don't think I can use the BLE apis directly.
Anyways, I'll poke at this slowly between other projects and share what I have. Hopefully I can inspire others to do likewise.
Cheers
52352329 10801
blazespinnaker said:
Anyone tried this? My goal is basically to make the Gear compatible with iOS devices.
It works from a high level - it says they're connected (and doesn't disconnect), but I haven't deployed any apps yet that communicate properly with an iPhone.
The BLE APIs are 4.3 (API 18) and the Gear is 4.2 (API 17), so I don't think I can use the BLE apis directly.
Anyways, I'll poke at this slowly between other projects and share what I have. Hopefully I can inspire others to do likewise.
Cheers
Click to expand...
Click to collapse
Yes, I just make a call from Gear with iPhone4S, now only call/answer/dial function worked.
I install the Bluetooth auto connect apk and manual connected with iPhone4S, I think need develop a new Gear manager for iOS.
Wow ... Hope to work with iOS. :good:
happyzdy said:
Yes, I just make a call from Gear with iPhone4S, now only call/answer/dial function worked.
I install the Bluetooth auto connect apk and manual connected with iPhone4S, I think need develop a new Gear manager for iOS.
Click to expand...
Click to collapse
What do you mean by manually connected? how?
photonicgeek said:
What do you mean by manually connected? how?
Click to expand...
Click to collapse
I was able to pair with iPod. I'm working on Android anything pairing right now, however.
blazespinnaker said:
I was able to pair with iPod. I'm working on Android anything pairing right now, however.
Click to expand...
Click to collapse
what did you do to get them connected? I have been trying but it always wants to reset...
photonicgeek said:
what did you do to get them connected? I have been trying but it always wants to reset...
Click to expand...
Click to collapse
Well, I think you can pair it during the initial reset phase (it will pair, but fail to connect), and then pair with your samsung s3.
photonicgeek said:
what did you do to get them connected? I have been trying but it always wants to reset...
Click to expand...
Click to collapse
1. Install "Bluetooth Auto Connect" app, you can find in in Google Play.
2. Disconnect Phone's bluetooth.
3. Goto Gear's settings -> bluetooth-> enable search
4. Open Bluetooth auto connect, enter devices menu
5. Search and pair in your iOS device.
happyzdy said:
1. Install "Bluetooth Auto Connect" app, you can find in in Google Play.
2. Disconnect Phone's bluetooth.
3. Goto Gear's settings -> bluetooth-> enable search
4. Open Bluetooth auto connect, enter devices menu
5. Search and pair in your iOS device.
Click to expand...
Click to collapse
Unfortunately, all it keeps doing is showing the reset dialogue.
photonicgeek said:
Unfortunately, all it keeps doing is showing the reset dialogue.
Click to expand...
Click to collapse
unselect samsung device
happyzdy said:
unselect samsung device
Click to expand...
Click to collapse
That's the issue... My iPhone doesn't even appear.
happyzdy said:
unselect samsung device
Click to expand...
Click to collapse
You can reset the device, pair with iPhone, and then pair again with your Samsung.
You'll still be paired after the reset.
happyzdy said:
Yes, I just make a call from Gear with iPhone4S, now only call/answer/dial function worked.
I install the Bluetooth auto connect apk and manual connected with iPhone4S, I think need develop a new Gear manager for iOS.
Click to expand...
Click to collapse
And can u show me by a video, please?
photonicgeek said:
That's the issue... My iPhone doesn't even appear.
Click to expand...
Click to collapse
Yeah, it'd be nice to reset without going to the Samsung devices.
I've been playing around with the various services/and activities via the am start command:
Code:
am start com.android.bluetooth/.common.BluetoothPairingDialog
am start com.android.bluetooth/.common.BluetoothConnectActivity
am start com.android.bluetooth/.common.BluetoothSyncingActivity
am startservice com.android.bluetooth/.common.BluetoothAutoConnectService
Bit of a chore, but I got these using smali / dex2jar / JD Gui
Code:
adb pull /system/app/Bluetooth.odex
adb pull /system/framework/ framework (grab all the frameworks for baksmali)
./baksmali -a 15 -x Bluetooth.odex -d framework -o Bluetoot
./smali Bluetoot
d2j-dex2jar.sh out.dex
And then run JD Gui on them to figure out what's going on. I'm not sure, but there is a VendorSpecificCommand in the odex which might be what's causing the reset. If there was a way to avoid that, it might help. Hard to say.
Another idea might be to use bluez or something and do a command line pairing.

Tasker with gear

Hi friends,i want buy samsung gear, but i dont know if Tasker (app) work with gear.
Thanks for your help.
Sent from my iPad using Tapatalk - now Free
Paid apps do not work (because of licencing issues - no play store/internet connection). We need a plugin to interact with phone side of things or dedicated gear app to apply to the watch itself
Brendo said:
Paid apps do not work (because of licencing issues - no play store/internet connection). We need a plugin to interact with phone side of things or dedicated gear app to apply to the watch itself
Click to expand...
Click to collapse
Couldn't one just backup the paid app with something like jrummy app manager, then side load the paid apk with wonders have??
Sent from my SM-N900V using Tapatalk
I've tried, but sideloading doesn't get around license checks
And the beta failed to install: http://tasker.dinglisch.net/beta.html
We need a galaxy gear tasker plugin !
fOmey said:
We need a galaxy gear tasker plugin !
Click to expand...
Click to collapse
First we need to figure out how to write apps that can talk between phone and watch. Then it wouldn't be hard to make a simple menu/button based app to trigger events
I've tried to port out "paid app", but no show after. :crying:
big_pongo said:
I've tried to port out "paid app", but no show after. :crying:
Click to expand...
Click to collapse
Pretty sure you'd need to get rid of the license check part...
I'm actually wanting to be able to use message counts from tasker on watch and commands from watch to tasker. Has to be both ways. Something like Glance for Pebble
I would like to use something that allows me to take action to tasker installed in my Smartphone. with the Sony smartwatch 1 it was possible to
Inviato dal mio GT-N7100 utilizzando Tapatalk
You can send notifications from tasker to your watch using Gear Getter:
http://forum.xda-developers.com/showthread.php?t=2524207
Brendo said:
You can send notifications from tasker to your watch using Gear Getter:
http://forum.xda-developers.com/showthread.php?t=2524207
Click to expand...
Click to collapse
Brendo if you can contact João Dias for The Fix autoremote app, if he fix The comunication bluetooth is possibile send message to phone and excute tasker action.
gear notification is a Good features but i want command My home with gear!
vingar said:
Brendo if you can contact João Dias for The Fix autoremote app, if he fix The comunication bluetooth is possibile send message to phone and excute tasker action.
gear notification is a Good features but i want command My home with gear!
Click to expand...
Click to collapse
Yep, just updating you with status. We'll see what next null rom brings featurewise as it should have native Bluetooth internet
All we need is an app that will send an intent to Tasker over Bluetooth like pebble tasker or pebble glance. It's the Bluetooth communication holding us up. (plus I for one have no idea how to code for android let alone use intents)
What I have found is that some paid apps will work. As an example Busybox Pro, works without a hitch. Same pull/install process as any other apk, until you run across an app that phones home for activation or validation. In the case of Flit keyboard as an example when I contacted them directly about the inability to activate they sent me a pre-activated apk. So it might be worth a shot to email the dev and explain what you are trying to do and they may be cool with figuring out a work around if it means selling more of their apps to the people in the community.
Brendo i have an idea, is possible run autovoice recognize from phone and speak with gear?
vingar said:
Brendo i have an idea, is possible run autovoice recognize from phone and speak with gear?
Click to expand...
Click to collapse
Those apps don't even open
However, watch is just a Bluetooth headset, so if we could get it working as such, may be possible?
_____
Sent from my GT-i9505 using xda premium
Brendo said:
Those apps don't even open
However, watch is just a Bluetooth headset, so if we could get it working as such, may be possible?
_____
Sent from my GT-i9505 using xda premium
Click to expand...
Click to collapse
you understand me! I dont want to install tasker or autoremote. I just want it as start as a Bluetooth headset!
vingar said:
you understand me! I dont want to install tasker or autoremote. I just want it as start as a Bluetooth headset!
Click to expand...
Click to collapse
Yes,I understand. I don't think anyone had worked out how to trigger an event equivalent to Bluetooth headset button though
_____
Sent from my GT-i9505 using xda premium
Brendo said:
Yes,I understand. I don't think anyone had worked out how to trigger an event equivalent to Bluetooth headset button though
_____
Sent from my GT-i9505 using xda premium
Click to expand...
Click to collapse
No headset button! autovoice app by joao dias work continuous without button!
can you verify if work?
install autovoice, create task with plugin autovoice recognize with headset and run.
check if work... if work today i buy gear
vingar said:
No headset button! autovoice app by joao dias work continuous without button!
can you verify if work?
install autovoice, create task with plugin autovoice recognize with headset and run.
check if work... if work today i buy gear
Click to expand...
Click to collapse
I've already got it. I'll give it a try later
_____
Sent from my GT-i9505 using xda premium
I tried everything I could think of, but doesn't look like auto continuous applies to Bluetooth. Couldn't even get it to work with my car bluetooth

Can we simulate a bluetooth button press?

Google Now can send and receive audio through our Gear. AutoVoice for Tasker can receive voice commands from our Gear as well! This opens up many possibilities! Both programs can be activated with the standard bluetooth button on your everyday headset.. is it possible to simulate this button on our gear? I am thinking our media control program works by simulating hard headset button presses. A program would be fine, but a widget would be ideal! TIA!
Another question. Is a bluetooth headset limited to these 6 button functions? Play/pause, skip, back, volume +/-, and the standard button mentioned above? If not, we can take Tasker automation from gear even further!
Sent from my SM-N900V using xda app-developers app
i hope for this
..
I've looked into some apps on play store, but nothing seems to work. Can't find any other examples where a headset is actually running android in order to utilise button in this way
brendo now rooted gear and install all, try if Utter or Klets work
This is all I need for a perfect gear !
I have searched ALL day to figure this out, although no luck sadly.
Best way of doing this would have to be using a plugin for tasker, just like atooma uses.
EDIT: We need to figure out how exactly the gear communicates with the phone, if we can manually send a request from the gear to the phone. We could setup a intent listener on tasker and it could execute tasks.
Maybe someone should speak with the dev's of gear getter ? Or ATN ? Figure out how they communicate with the gear ?
Got Google Voice to work from Gear
With Google search 3.1 all you have to do is say "Okay Google". This works for me.
To Launch Google Search from Gear
1) Set Up to recieve Google Notification
2) Open a Google Notification
3) Press Show On Device. This will launch Google Voice Search
4) Say "Okay Google".
Make sure you have "Record Audio through Bluetooth headset if available" checked in Google Voice. Only issue is that if Phone locks. Maybe someone can find a way to get a shortcut for "Show On Device".
TheismanMeetLT said:
With Google search 3.1 all you have to do is say "Okay Google". This works for me.
To Launch Google Search from Gear
1) Set Up to recieve Google Notification
2) Open a Google Notification
3) Press Show On Device. This will launch Google Voice Search
4) Say "Okay Google".
Make sure you have "Record Audio through Bluetooth headset if available" checked in Google Voice. Only issue is that if Phone locks. Maybe someone can find a way to get a shortcut for "Show On Device".
Click to expand...
Click to collapse
This may be our best option right now.. Thanks for voicing this! I hope to see a Tasker plugin soon.. Thanks everyone for the feedback!
Sent from my SM-N900V using xda app-developers app
I have a solution...
See thread null Rom!
Wonderful!
Sent from my iPad using Tapatalk - now Free
I'm reviving this thread because I've been searching for this exact thing, and I can't believe it's so difficult - has anyone found a solution? I can't find vingar's "null rom" thread he refers to above as a solution. Any info is very welcome.
snickersnee said:
I'm reviving this thread because I've been searching for this exact thing, and I can't believe it's so difficult - has anyone found a solution? I can't find vingar's "null rom" thread he refers to above as a solution. Any info is very welcome.
Click to expand...
Click to collapse
I too find it difficult to swallow that a solution has not been found. I am a little late to the "gear party" (only having mine for a few weeks now) and have been searching for a solution to this.
I believe Vingar's solutions is here: http://forum.xda-developers.com/showthread.php?p=47519892#post47519892
I have found a few apps that may help with this but none that directly address what I am looking for....namely a widget on the home screen of my gear that simply sends the correct keycode to my phone via BT.
Artimis said:
I have found a few apps that may help with this but none that directly address what I am looking for....namely a widget on the home screen of my gear that simply sends the correct keycode to my phone via BT.
Click to expand...
Click to collapse
That's it exactly. I have no programming talents, but this seems like such a simple - and powerful - solution, not least because it would allow Google Now voice inputs. And the watch is already a BT device, an also an android device. Frankly it's absurd that this wasn't included stock.

Help with Samsung Smartview autoconnect to device

Hi,
i d like to create a task so it autoenables smartview and connects to a given device.
i couldnt find the trigger todo so, is it may not possible ?
The Trigger Bluetooth is clear, but i cant figure the way to use smartview with device as task ...
for an Tipp thanks ahead
Unfortunately, I haven't had a Samsung in years, but a post in the S7 Q/A forum suggests using an app called Miracast Shortcut.
ktmom said:
Unfortunately, I haven't had a Samsung in years, but a post in the S7 Q/A forum suggests using an app called Miracast Shortcut.
Click to expand...
Click to collapse
thanks for the tip, i gave it a try, this will only open the screen share page on the phone, there is no auto connect option in the app so it wont connect to the cast device actually.
was worth a try
alturismo said:
thanks for the tip, i gave it a try, this will only open the screen share page on the phone, there is no auto connect option in the app so it wont connect to the cast device actually.
was worth a try
Click to expand...
Click to collapse
Try using the net -> bluetooth connection action
ktmom said:
Try using the net -> bluetooth connection action
Click to expand...
Click to collapse
Hi, thanks, but thats exactly what im doing in profile, using the bluetooth connect to car to open the app, but the app doesnt auto connect to the cast device (and there is no option as far as i see in the app todo so), so the point in auto connect to the device cannot be provided like this in my usecase.
thanks for the tip with BT, that is my trigger already to start the action, but the action "auto connect to a cast device" ... is not given to me.
alturismo said:
Hi, thanks, but thats exactly what im doing in profile, using the bluetooth connect to car to open the app, but the app doesnt auto connect to the cast device (and there is no option as far as i see in the app todo so), so the point in auto connect to the device cannot be provided like this in my usecase.
thanks for the tip with BT, that is my trigger already to start the action, but the action "auto connect to a cast device" ... is not given to me.
Click to expand...
Click to collapse
There is a tasker plugin by the same developer called AutoCast. Maybe it will help you.
I don't do any of this, so obviously I don't have any personal experience to offer. You might try on the tasker Google groups forum.
ktmom said:
There is a tasker plugin by the same developer called AutoCast. Maybe it will help you.
I don't do any of this, so obviously I don't have any personal experience to offer. You might try on the tasker Google groups forum.
Click to expand...
Click to collapse
was a great idea, sadly this app (beta state) only supports google devices, no miracast device, but that function would have been the winner, thanks again
Probably a part of the problem is that Google removed miracast support from "stock" android awhile ago. That dates back to the nexus 6 days.
ktmom said:
Probably a part of the problem is that Google removed miracast support from "stock" android awhile ago. That dates back to the nexus 6 days.
Click to expand...
Click to collapse
contacted the developer of the autocast plugin and he confirmed, only works with google cast devices like i (sadly) expected.
thanks anyway for the hint.
That's always working to automate the tap(s) required. You could use Tasker to open the app, AutoInput UI query to determine when it's open, then an AutoInput action to enable the device connection.
probably yes, but thats now too much read and trial and error for now, thanks.

Categories

Resources