[Q] Will not go past lock screen on any rom - Sprint HTC One (M7)

I have a Spint HTC one that was recently rooted. I am familiar with rooting samsungs and was very interested in the HTC ONE. Long story short, every bit of data was erased from my phone thanks to a "tech", I waited 2 weeks to get an OTG USB cable so I could get a ROM onto my phone that way, Well yesterday I got the OMJ rom to work just fine, but playing with it I felt I wanted more, so I went in and downloaded ViperRom. Went through the steps, choosing what I do and do not want on my phone. Well I finally made it to the lockscreen, once I unlocked phone it went to white screen with green HTC logo. I went back into twrp, cleared EVERYTHING so I could just start fresh like I did with OMJ. Still the same out come. I tried beanstalk, pacman, stock with goodies 5.5 v2. I have tried loading 6 or 7 different roms ALL with the same problem, lock screen, unlock, white screen with green htc logo. Then it just reboots itself. What am I doing wrong???

So now I have found viperboys stock deodex rom, I usb otg that rom onto phone, rebooted system. Unlocked the phone and the activation screen popped up! As I was putting in my password for my wifi, the keyboard dissapeared. Would not come back up. I contined through the set up and when I got to the main screen it was blank except for the drop down bar. I pulled that down, was able to get into settings, and when i exited settings to the main page, everything was there, stock. Then almost instantly I got a pop up saying "process system has stopped responding" Wait or Ok. I waited, 10 seconds later phone reboots itself. It turned back on, went through the whole set up again and boom, process system has stopped working. This time I clicked ok, instantly rebooted...am I screwed?

spowers0409 said:
So now I have found viperboys stock deodex rom, I usb otg that rom onto phone, rebooted system. Unlocked the phone and the activation screen popped up! As I was putting in my password for my wifi, the keyboard dissapeared. Would not come back up. I contined through the set up and when I got to the main screen it was blank except for the drop down bar. I pulled that down, was able to get into settings, and when i exited settings to the main page, everything was there, stock. Then almost instantly I got a pop up saying "process system has stopped responding" Wait or Ok. I waited, 10 seconds later phone reboots itself. It turned back on, went through the whole set up again and boom, process system has stopped working. This time I clicked ok, instantly rebooted...am I screwed?
Click to expand...
Click to collapse
Did you make a back up of your successful OMJ ROM? You need to get back to a successful running point and then RUU back to stock.
This may help: http://forum.xda-developers.com/showthread.php?t=2503646
Check here too: http://forum.xda-developers.com/showthread.php?t=2277892
Bigdaddy619 is the absolute best at figuring out tough situations like this; I'm not sure if he's cool with PMs, but if you look him up he will help if he can.

BMP7777 said:
Did you make a back up of your successful OMJ ROM? You need to get back to a successful running point and then RUU back to stock.
This may help: http://forum.xda-developers.com/showthread.php?t=2503646
Check here too: http://forum.xda-developers.com/showthread.php?t=2277892
Bigdaddy619 is the absolute best at figuring out tough situations like this; I'm not sure if he's cool with PMs, but if you look him up he will help if he can.
Click to expand...
Click to collapse
PM away not a problem

Related

Possibly a dead Kaiser, suggestions? (or purchase!)

So, I plugged my Kaiser (Tilt) into my computer the other day to charge it, and the next morning when I unplugged it, I noticed it was locked up. No biggie, I soft-reset it, and it came directly back to the bootloader (right before the bootloader shows is a white screen, that says "Loading image... No image found!", that flashes for a fraction of a second.
If I plug it into my computer at this point, Windows says the USB device has malfunctioned and it doesn't recognize it. I can't flash it ("connection error"), and it wouldn't hard reset.
Then it kinda came back to life, kinda. Suddenly it'll boot into WM. Windows still doesn't recognize it, but I used JumpSPL to get it into a bootloader, and tried to install a HardSPL on it so I could flash a new ROM (to this point it's been stock-only because it belongs to the company I work for). The HardSPL flash failed partway through, and then it was stuck in bootloader for real. At that point I tried flashing a stock ROM, and it kept failing at different points, never getting more than about halfway through.
Does anyone have any suggestions? Or, do you want to buy it? At this point it's mine (company doesn't want it back), so I'm willing to experiment freely with it. Right up until my Touch Pro 2 comes in and I lose interest
*** UPDATE ***
So after writing this, just for kicks, I decided to give re-flashing the original ROM one more shot (it's been off and untouched now for several days at this point) and the flash succeeded. We'll see where it goes from here
Good luck with your phone.. I hope all goes well.. If you find out what the problem was/is, let me know
Hey godefroi, im new to all of this, just bought a messed up tilt from my friend, and i want to know if you could givve me the link for the insturctions to refalsh my tilt
Just hit up AT&T's site (which redirects you to HTC's site) and download the ROM. The file you want is "_ATT Tilt_RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe", which was the latest update for the phone.
Seems it's not fixed. After playing around with it for a couple days, it's back into bootloader and stuck there. Taking out the battery and leaving it for a few hours brings it back for a while, but it seems there's no permanant fix. Next step will be flashing HardSPL and a custom ROM. I'll update when that happens.
awww dang, that sucks. thank you for tellin me. hopin your tilt comes out ok
Did you ever get this resolved?
Hey man did you ever get this fixed? I cant find anything on it.
I can get to a boot loader screen and it shows USB and when I plug it into my computer I hear the sound that it's recognized but my active sync wont connect.
This is what I posted earlier and a moderator killed the post because I didn't spend hours hunting for a solution first before posting. I don't think one exists but if there is I would be glad to know it. I have flashed this phone and my older HTC Wizard dozens of times with no issues so Im not a "noob"
Earlier today I was taking a picture and the screen kind of stuck so I has to soft reboot it.
It didn't come back up. I was left at the rainbow bootloader screen.
I tried holding the camera button down and rebooting but it didn't change anything.
I tried several different combo's of holding keys down and rebooting and it always came back to that bootloader screen.
So the next thing I did was to format my cd card and downloaded KaisDiagTest1.zip and then coppied the KAISDIAG.NBH image file from the zip on to the root of the sd card.
That worked fine and I was left at a screen saying SPL 1.00.OliNex.
Next thing I did is were I think I screwed up. I flashed it with _ATT Tilt_RUU_Kaiser_CINGULAR_WWE_1.62.502.0_radio_sign _22.45.88.07_1.27.14.09R2_Ship.exe which is the ROM from the HTC site and I think I was only supose to use a custom ROM and now after it finished flashing the ROM it rebooted and is stuck showing loading ... on the screen.
It goes past the boot loader and is stuck at loading...
Please advise if there is anything I can do.
Cheers,
Chris
godefroi said:
So, I plugged my Kaiser (Tilt) into my computer the other day to charge it, and the next morning when I unplugged it, I noticed it was locked up. No biggie, I soft-reset it, and it came directly back to the bootloader (right before the bootloader shows is a white screen, that says "Loading image... No image found!", that flashes for a fraction of a second.
If I plug it into my computer at this point, Windows says the USB device has malfunctioned and it doesn't recognize it. I can't flash it ("connection error"), and it wouldn't hard reset.
Then it kinda came back to life, kinda. Suddenly it'll boot into WM. Windows still doesn't recognize it, but I used JumpSPL to get it into a bootloader, and tried to install a HardSPL on it so I could flash a new ROM (to this point it's been stock-only because it belongs to the company I work for). The HardSPL flash failed partway through, and then it was stuck in bootloader for real. At that point I tried flashing a stock ROM, and it kept failing at different points, never getting more than about halfway through.
Does anyone have any suggestions? Or, do you want to buy it? At this point it's mine (company doesn't want it back), so I'm willing to experiment freely with it. Right up until my Touch Pro 2 comes in and I lose interest
*** UPDATE ***
So after writing this, just for kicks, I decided to give re-flashing the original ROM one more shot (it's been off and untouched now for several days at this point) and the flash succeeded. We'll see where it goes from here
Click to expand...
Click to collapse
I never did. Every once in a while I can get it reflashed, but inevitably it stops working. Just like yours, I'll sfot reset it and it'll be stuck in bootloader.
Best bet is when it gets stuck on the bootloader or on the "white screen" as to put it. Do the following:
1) Unplug battery, memory car and simcard. Reinsert battery ONLY after 3 seconds (cards stay out!)
2) Hold BOTH softkeys down at the same time
3) Whilst holding softkeys, turn the unit on
4) You will be prompted to press "SEND" to reset all user data (you will lose everything on the internal storage. Press the Dial (green button) to reset.
5) When it's finished, you will be prompted to press "SEND" to reboot. Press send and it will boot into WM but might take slightly longer.
6) Realign your pointer and tada. It's up and running.
n.b. This often happens when the radio version of your phone isn't correct. If you notice, when you get stuck in the "white screen" the "gsm signal sight" is frashing green!
I've got to warn you again, this procedure WILL delete all of your internal user storage, hence why I recommend taking out all of the cards before proceeding.
heyadrian said:
Best bet is when it gets stuck on the bootloader or on the "white screen" as to put it. Do the following:
1) Unplug battery, memory car and simcard. Reinsert battery ONLY after 3 seconds (cards stay out!)
2) Hold BOTH softkeys down at the same time
3) Whilst holding softkeys, turn the unit on
4) You will be prompted to press "SEND" to reset all user data (you will lose everything on the internal storage. Press the Dial (green button) to reset.
Click to expand...
Click to collapse
Nope. Stuck in bootloader is stuck in bootloader. Like, stuck. No, really, it's stuck. Hard-resetting doesn't get it out.
heyadrian said:
n.b. This often happens when the radio version of your phone isn't correct. If you notice, when you get stuck in the "white screen" the "gsm signal sight" is frashing green!
Click to expand...
Click to collapse
There's no white screen, just bootloader rainbow. Also, there's no chance that I flashed the wrong radio, because this phone has never been flashed with anything but the official ROM. It's never even had a HardSPL flashed on it.
hmmm...now that you mention it has never had a hardSPL, maybe that could be the next step?
i understand that some people may want to keep a "stock" configuration in case waranty needs to be claimed or for any other valid reasons...but if the phone is out of waranty, theres little to lose.
only reason i'm suggesting it is because cmonex has a hardSPL that aims to fix EXACTLY this problem, among others (if i understand your problem and cmonex's fix correctly):
http://forum.xda-developers.com/showthread.php?t=420683
also, this thread links to a page in the wiki about your problem (or something along the same lines):
http://forum.xda-developers.com/showthread.php?t=423486
finally, a collection of hardSPL versions can be found in this "roll up" thread:
http://forum.xda-developers.com/showthread.php?t=498320
i guess you may have already gone through the above mentioned links but if not, they may open up more avenues for troubleshooting or even a permanent resolution.

Help! stuck at boot and touchscreen not working!

Any help would be greatly appreciated.
I have a launch day Nexus One running CM5.0.5.3, the OC/UV kernel, and the EPE54B radio.
It has all been running great until today. I took it out of my pocket and it was warm (not hot) to the touch. I noticed the screen was blank but the buttons along the bottom were illuminated. I tried resetting it (power+volume down+trackball) and that didn't do anything, so I pulled the battery. When I rebooted it, it seemed to take a longer than usual time at the initial boot screen, and then went to the animated screen. It stayed on the animated screen for quite a while and then froze. It's stuck on the X mid-formation.
I then booted into the bootloader (which reacts like normal) and went into recovery. I re-flashed CM5.0.5.3, no effect. I wiped cache and system and re-flashed. Nothing. I did it again, and it finally booted up but I could only select things with the scrollball. The volume rocker worked fine, but the touchscreen is completely non responsive.
If I let it sit at the boot screen for a while it will go black eventually and time out.
I'm at a loss. I'm in the process of downloading a stock ROM and am going to flash it next. Anyone have any suggestions? My bootloader is (obviously) unlocked, so I'm worried about warranty work
Update: Just got it to boot (with the stock ROM) and I've got a warning screen saying:
Sorry!
Process system is not
responding.
[Force close] [Wait]
Any ideas?
Reflash CM 5.0.5.3 and then post back
Ok, re-downloading now.
Just flash in recovery?
Flashed in recovery (after wiping)
The phone stays on the stationary initial boot screen (four bars) for about a minute and a half and then goes to the animated cyan X. It stays there booting for probably two minutes before stopping mid-animation. If you let it sit there for a while the screen will time-out, which you can bring back with the power button. Sometimes when you hit the volume rocker you can hear the beep beep but nothing shows on the screen.
What the hell is wrong with my phone?
After an obscenely long time I got it to boot up.
Touchscreen is not responding, trackball is not responding, I have a question mark on the battery indicator, and no service.
I can't unlock the screen because of the non-functioning touchscreen. Live wallpaper is running great, it makes the sound when USB debugging is connected, it just won't react to any input.
I can, however, establish an ADB connection. It shows up on the device list and a remount succeeded.
Would reflashing the radio be of any benefit?
Dang the touch screen is unresponsive? I'm not an expert, but i'll try to give you some ideas.
I had some trouble once and I used settings-privacy then erased everything from within the OS. Then I reported to the screen just before going into recover and hit clear storage. Then went into recovery and wiped everything that I could. After that, flash the Rom that you want.
I've done a full wipe to no avail.
I'd bite the bullet and call htc, don't mention that you have rooted, it may be a hardware thing.
Scaaaary!! But hey, it happens. I would also try wiping for EXT on the SD card if you have been using apps2sd.....May not hurt, mights well try everything.....
Wiped everything, reflashed radio, flashed to stock. Nothing. This is exactly what I was worried about when I unlocked it.
Oh, well.
liam.lah said:
I'd bite the bullet and call htc, don't mention that you have rooted, it may be a hardware thing.
Click to expand...
Click to collapse
Yeah, I'll do that tomorrow. I guess I'll flash everything back to shipping and hope they don't notice.
mortzz said:
Wiped everything, reflashed radio, flashed to stock. Nothing. This is exactly what I was worried about when I unlocked it.
Oh, well.
Yeah, I'll do that tomorrow. I guess I'll flash everything back to shipping and hope they don't notice.
Click to expand...
Click to collapse
Many people have posted that they got a replacement even with an unlocked bootloader. One guy I heard said they charged him $55.
Either way, you can probably get a replacement.

everything is Force Closing since yesterday

hey guys, I don't know what's going on with my S7 but yesterday was working fine and out of nowhere everything started to FC! From twitter to "Google Services Framwork", Gmail, browser, tweetdeck, calendar, voice, I can't pretty much use it anymore, I haven't done any new app installations so i don't know what's wrong! is it just me, or anyone else having this problem??
Any help will be much appreciated!
Thanks
That has happened to me 4 or 5 times. It's like half of the device gets erased but the apps are there. Everything force closes. I end up having to erase the device and re-install everything. Reboot into recovery if you can't figure it out and format the system and data. For some reason when i do that, i keep root. Not entirely sure how that happens, but one less step for me. I think root is power and one of the volume buttons.
djdanska said:
That has happened to me 4 or 5 times. It's like half of the device gets erased but the apps are there. Everything force closes. I end up having to erase the device and re-install everything. Reboot into recovery if you can't figure it out and format the system and data. For some reason when i do that, i keep root. Not entirely sure how that happens, but one less step for me. I think root is power and one of the volume buttons.
Click to expand...
Click to collapse
ha! i remember I already did that. After the Update we had, and I exchanged mine for a new one I decided to stay with no root (i don't know why! lol) so I guess I'll reset everything and go back to root I figured at the end I was gonna do that, but I was trying to see if it was just me or there was a fix
thanks man!
ok, so since yesterday I've been trying to factory reset the DS, and when it boots back on, everything stays the same!
I'm a little confused now, if I take a picture and I turn the tablet off, when I turn it back on, the picture disappears. Same thing happens if I move widgets, delete or create new ones on the screen, they go back to as the configuration was on friday night! GV not working, and the last message that shows there, same thing, shows the last one on friday. I don't know what can I do.... should I call dell??
duck tape and dynomite
stupid thing started crashing yesterday FC this and FC that ....cant restore it as i no longer have write access to the internal sd card
1) tried nv flash
2) tried restoring from clockwork
3) tried pushing files through adb
4) tried fastboot ....
if i didnt just dump money into this thing id blow it up ......
any help would be appreciated.......any tips to fix it or kill it completely so i can get another one
actually deleted all of the files on internal sd card and uninstalled every program on the device looked completly stock ....rebooted it and it went back to how it was yesterday ......theres gotta be a reason why other are having the same problem that started on the same day .....maybe dell pushed an OTA update and screwed us ......just a thought cause mine was fine till i went 4g yesterday so my sis could post facebook pics ....not sure but hope we can figure this out
Samething happened to me
Hi, did you ever find a solution? my streak 7 was ran out of battery, before it shut off, the screen started flickering and then it turned off. after it came back on, it looked like it was fine, everything looked normal, but then everything started force closing, haven't found a solution
jz83 said:
Hi, did you ever find a solution? my streak 7 was ran out of battery, before it shut off, the screen started flickering and then it turned off. after it came back on, it looked like it was fine, everything looked normal, but then everything started force closing, haven't found a solution
Click to expand...
Click to collapse
I'm running stock, and I discovered the hard way that you can't let the S7 battery run all the way down. The S7 will not power itself down in time. I had the same issue, and the only way around it was to do a complete factory reset, using the menu button from the main screen. I think the reset is in the "About" section, but I don't have my S7 with me now.
Being used to WM6, which powers the device down at 5%, I was not expecting the device to do this, but there it is.
dell streak 7
im not sure if I am the only one with this issue you but becareful with the streak 7 mine well both of mine wont charge properly and the newest one wont charge at all. i have to send it back to dell for them to fix it. Im not sure what cause this but my only advie is to never use a different charger for it only dell chargers. Im guessing that it messes up the battery callibration and then it gets really hot when charging

Not booting (into anything)

My phones battery died over the weekend, I got it charged back up, the phone was acting real sluggish so I restarted it, came back a few hours later and noticed it was still on the white HTC screen, I watched it for a few minutes and noticed it would sit on this screen for about a minute, then go dark, then back to the HTC screen and we go round and round.
I tried hboot, all the options do this. Fastboot, recovery even factory restore all trigger this infinite loop...
What has happened? How can I fix this?
Note that it was a stock phone, no mods, no custom ROMs or anything else. It was OTA updated to ICS about a week ago, and has been fine since then.
echodreamz said:
My phones battery died over the weekend, I got it charged back up, the phone was acting real sluggish so I restarted it, came back a few hours later and noticed it was still on the white HTC screen, I watched it for a few minutes and noticed it would sit on this screen for about a minute, then go dark, then back to the HTC screen and we go round and round.
I tried hboot, all the options do this. Fastboot, recovery even factory restore all trigger this infinite loop...
What has happened? How can I fix this?
Note that it was a stock phone, no mods, no custom ROMs or anything else. It was OTA updated to ICS about a week ago, and has been fine since then.
Click to expand...
Click to collapse
So can you get to the bootloader and send fastboot commands?
Sorry I am not a modder or anything like that, do you mean select the "fastboot" option?
I tried running fastboot reboot from my PC while it was plugged in and my phone was in the hboot area, and it just says "waiting for device" and never does anything.
If I select "fastboot" from the hboot menu the phone restarts, a bar goes up the side of the HTC screen then about 30 or so seconds later it goes black and repeats process.
Ah, yes I can. I figured it out, plug into USB, select fastboot, then it goes to USB. I was able to reboot the phone.
EDIT: Tried running the update from HTC's website, took it about 5 - 10 minutes or so. It completed without issues, however the phone is still doing this infinite rebooting cycle...
You mean the RUU? And for ICS? That is supposed to be the ultimate method to unbrick and return to stock. Sounds like the OTA messed something up. When you say go dark you mean the screen goes of then it comes back to the HTC screen? This is probably obvious but have you tried a battery pull? Taking out aim card anything is worth a shot.
Sent from my HTC PH39100 using xda premium
Yes the RUU update from HTC's website. The phone started this morning without issues. Then after a restart it starts the whole cycle over again.

Phone starts with moving halo and "wissen"... "Is it wiping my phone?"

Phone starts with moving halo and "wissen"... "Is it wiping my phone?"
Just now I took my Nexus 6 out of my pocket because it was very warm.
The screen was all black with in the middle a big Halo moving with the disturbing message "wissen" beneath it.
"wissen" is Dutch for wiping, deleting or removing...
Turning the phone off is possible by holding down the power button for 6 seconds, but then it turns on again after 3 seconds showing that same screen again.
After some fiddling I was able to find a method to turn it off.
I can start the phone by holding down the power button and the volume button (down) which will start the recovery program.
There I can turn it off.
Although I have unlocked the phone and ran modded firmwares I switched to standard factory Nexus 2 years ago and haven't had a rooted phone for all that time.
Recently I installed the 7.1 OTA updated.
I'm afraid this is something like a remote wipe.
It also doesn't ask me to give my PIN which is normal for it to do.
What is happening?
Some more info: Yesterday I bought the "AIO All-in-one Toolbox " after using the free one for 3 weeks. Could that be involved?
It may be formatting and encrypting your data partition.
Yes, but why?
It just went into my pocket this morning....
I came one step further.
As I was still able to get it into fastboot loader I exited with "volume up"
Then it went into an almost normal boot. This didn't require the pin it normally needed.
The device went into a full factory reset.
I thought I would be up and running fast, but after entering my new gmail account/password I got the message that I needed to wait another 24 hours because I did a password reset.
I did this password reset of my Google account out of safety. Now I'm being punished for this....
Luckily I have a spare Motorola G3 with its own SIM, so I can at least use my phone.
I can't even use my Nexus as a phone nor can I go to settings. Maybe if use another Google-account.
Did some more research...
The last Exchange sync was while cycling to work.
Didn't use the phone then nor later.
Because my Google-account is locked I can't do anything with my Phone (not even phone), so I decided to flash an alternate rom on it.
I flashed lineagos and also rooted the device again.
Although I did root my Nexus 6 in the beginning this is the first custom ROM I have on it. I still need to install gapps.
Now I can start using my Titaniumbackup again that I bought several years ago.
I still have no idea how it could have gone into wiping. I put the phone in my pocket while it was screenlocked. The device needs a pincode to unlock.....
I am still unable to use Google Apps. I can run the app, but it doesn't let me install apps.
On the stock rom I was just stuck (stuck rom, haha)..... at the installation screen unable to even make a phone call....
Does someone have any idea???
frater said:
...
Does someone have any idea???
Click to expand...
Click to collapse
My idea is that you have the N6 unprotected in your pocket. Moving or cycling caused activation of a factory reset.

Categories

Resources