My carrier had some little problems during the past weeks, aparently they were working on something. I sometimes, for short periods, did not have data connection or no servic at all. Now the problems are gone and a speedtest today showed that at my home, the download speed went from an average 1 Mbit to over 5 Mbit!
However, the H symbol won't go away anymore! It used to switch to 3g when not data was transferred. I assume that this will influence battery life.
Is there anything I should be worried?
From what I recall, H is faster than 3g, as long as your in a good signal area, the H will always be visable, it will only drop down to 3g if the area your in has no H signal... and if there is no 3g it will drop to a 2g signal... simples, having the H does not meen that data is being transfered!
I am aware of the different speed levels, what I experience now is that the H symbol stays all the time, whereas it used to change to 3g when idling even in areas with very good reception...
GMH24 said:
I am aware of the different speed levels, what I experience now is that the H symbol stays all the time, whereas it used to change to 3g when idling even in areas with very good reception...
Click to expand...
Click to collapse
Wait, I don't get what you're saying. Let me clear it up:
Very good reception = H
Not so good reception = 3G
You want to see H (means HSDPA which is a a type of 3G data, but it's faster).
MrSimtang said:
Let me clear it up
Click to expand...
Click to collapse
Okay, I'll try that too!
I live in an area with very good reception and therefore the phone used to switch from 3g to H whenever data was transfered and back . Now, however, it stays on H all the time and does not switch back to 3g when no traffic occurs.
It is just a change in the pattern my phone behaves so I wanted to get some info on that...
Hi, it's your phone doing what it should by seeking the best signal.
H refers to HSDPA which is based on UMTS (3G). Consider it a 'turbo' version of 3G. It's sometimes also referred to as 3G+ because it's faster then 3G but not really 4G technology. The tower in your area most likely got upgraded to HSDPA that's why you don't see the 3G icon anymore.
Sent from my GT-I9000M using XDA App
Not correct, he mentioned that his phone was using H on demand before, so the capability was there already.
The problem is that H mode uses more battery than 3G, which is why it normally only switches to H during data transfers instead of continously being on.
Possibly your provider made a change which forces your phone to stay in H mode. On hardcores homepage (see speedmod kernel thread) he describes a method to manually deactivate H mode if you want to play with it.
Hope that helps.
Sent from my GT-I9000 using Tapatalk
seems to be the explanation... Suddenly I have ~6 Mbit, so almost unsurprisingly there had to be a catch
as for disabling H, it would be permanently so not quite an option. I guess, I'll have to live with it but nevertheless I'll call customer support..
Hspa and 3g are actually different technologies, but can be used on the same site and freq. If you have noticed that your phone is nowdays all the time showing H ( hspa ) and not in 3g like before it means that your carrier has expanded their hspa features and capacity of the network on that area. Main difference between these two tech is of course the speed and how network resources are shared between the users. In 3g you have dedicated ones, but speed limited and in hspa you are sharing the resources between other ones under that cell area. hspa is good if you are near by the cell and there is not too many users from battery consumption point of aswell from througput point of view, 3g is better if you are on the cell edge due to dedicated resources reserved only for you. Main point is, battery consumption of your phone depends mainly how you use your phone ,what kind of applications you have and how often those are connecting/contacted by the network.
Browsing in 3g sucks!
Sent from my GT-I9000 using XDA Premium App
I've flashed my phone countless of times now over the past months and one thing I was hoping for would be better signal strenght for WCDMA mode... I live in Switzerland and my provider is sunrise. Whenever I'm using WCDMA mode the signal is just horrible. Mostly 1 bar or sometimes dropping to zero. 3g and H works most of the time, but the signal is bothering me.. I've tried different modems etc.. but nothing seems to change.. Does anyone else have this problem?? what can I do about it? GSM has full bars most of the time and that's why it's so weird.
also worthy to note is that people hear an echo sometimes when they're talking to me both in GSM and WCDMA mode.
it would be great if someone knows how to solve this problem...
have you been on your providers website to check the coverage in your area ? they could be a fault on their part affecting your signal strength
Im on Vodafone UK and i have terrible 3g signal, I can only use 2g/GSM otherwise my phone doesnt recieve 1 bar of signal - bit of a bummer when you have a smart phone and unlimited internet
Finally, How was your signal before you flashed ? when the phone popped out of the box ? was it still poor then ?
I live in area with low GSM signal but I noticed that my X8 has very bad reception comparing to my old k750i.
k750i has 5/5 bars most of the time but on x8 I have 1 or 2 bars (max is 4).
The strange thing is that X8 gets 4 bars if I make or receive a call or just check my credit (ussd code) but it's only temporarely. After few mins it lose signal again.
What do You guys think: Is it normal behaviour?
Maybe you use WCDMA signal (i had it with 1 or 2) or signal is low on your place..
howardmatthew168 said:
Maybe you use WCDMA signal (i had it with 1 or 2) or signal is low on your place..
Click to expand...
Click to collapse
I checked use only 2g so it's not wcdma.
I just don't understund why I have much better signal reception in calls than in standby mode.
Sometimes it cause that I can't be reached because of low signal in standby mode.
Guys I have an odd problem.
Where I live, the signal on the HTC One switches erratically and constantly between H+, H and 3G. At every switch of course the data connection goes offline. It's driving me crazy.
Is there a way to force the phone to one of the three: 3G or H or H+?
Please see image 01.
I've tried going into *#*#4636#*#* but the choices baffle me (see image 02). I've tried a few of the available choices but it seems that 3G, H and H+ fall into the same category.
It's probably a dead end, I can't imagine what else to do ..... has anyone else had the same issue?
The 3G logo means it's on voice only, and H+/H means there's data incoming/outgoing. They're using the same radios and frequencies, it's more like an idle state when it shows 3G. 3G will still periodically go up to H+/H to check for any incoming data then goes back to sleep at 3G.
I have the same problem with my connexion. It is only stable when I have the "3G" symbol. I did not find a way to force "3G". It seems the switch to "H" is on demand...
mrechte said:
I have the same problem with my connexion. It is only stable when I have the "3G" symbol. I did not find a way to force "3G". It seems the switch to "H" is on demand...
Click to expand...
Click to collapse
It's normal behaviour, if you have a good H connection it will switch to this when there is data traffic but when there isn't it will switch between 3G and H
Anyone with Android 6.0 experience this issue?
So, when the phone enters an area with weak 3G signal, it will go to 2G (GPRS).
This is normal behavior.
Then, when the phone enters an area with strong 3G signal, it will go back to 3G.
This is also normal behavior.
Except, the restored 3G connection is weak. The icon shows with "no signal bar". It is connected to 3G though.
And it will stay like this until I recycle the connection by going to airplane mode and turn-off airplane mode.
My device is Nexus 6, international model. I installed Android 6.0 by flashing the image.
It is not rooted though and it doesn't have much apps.
And yes, I can reproduce this issue every time, as I know exactly the weak 3G area in our building.
Thanks.