Hi friends ... i am not a senior member, i am lil bit above the noobs.
OVERCLOCKING CAN BE INJURIOUS TO CPU
I am not a creator of this method of overclocking or underclocking. This method of overclocking is called MILESTONE OVERCLOCKING.( http://code.google.com/p/opptimizer/ )- AS given in the link that link is broken or file is broken. Dont download it from there. I downloaded the file way back when the link was working good.
There is one problem in overclocking CPU of i9100g, its mentioned below.
If any of u want me to delete this thread that i m just overfilling the forums then most welcome.
Please post ur any information u know about overclocking i9100g. Till now not even a single kernel is available to do overclocking.
As we all know that i9100g is hard capped at 1008mhz .I think, its only superatmos kernel which is now capped at 1200mhz.
METHOD:
It works on superatmos kernel 3.0+stock rom; superatmos + super rom ; Super rom.
1. Flash the given file as given below through CWM.
2. Go to terminal emulator and type
su
cat /proc/overclock/*
3. U will get all the information about ur GPU and CPU. (SEE THE SCREEN SHOT)
If u read it carefully u will notice that in i9100g there are 5 frequency tables
300, 600, 800, 1008, 1200. But u will get only 4 options "mpu_opps" i.e 300, 600, 800 and 1008mhz. It means we can overclock any given mpu_option but not 1200mhz. I have overclocked 1008mhz to 1100mhz with sucess but we cant do it to 1200mhz. So its of no use. If any senior member can do alterations in their roms or kernels and provide us 5 mpu_opps instead of 4 mpu_opps then we can overclock 1200mhz freq also.
IF u want to try then u can edit the init.d script file( GO TO SYSTEM/ETC/INIT.D/00.OPTIMIZE). Method is already mentioned in the init.d script file
(Milestone overclock apllication is also available on MARKET but its not working on i9100g)
4. BUT U CAN OVERCLOCK GPU LIKE A CHARM. (100% sucess)
AGAIN OVERCLOCKING CAN BE INJURIOUS TO GPU
As u have already flashed the given file though cwm and no need to edit script file under "system/etc/init.d" folder.
Now the method is :
- Make script files in "scripter" of romtoolbox applicaton. (Advantage is that u can easily overclock / underclock /or set to default any time)
-I have given the screen shots . Do it just like the way it is mentioned in the screenshots and save them.
GPU WILL GOT RESET TO DEFAULT VALUE WHENEVER U RESTART UR PHONE. I THINK ITS POSITIVE POINT.
I HAVE TESTED IT ON XWKJ2 stock and XXLB1 customed rom
Please mention any other method if u know. If any other method comes into play then we will delete this method.
Thanks for ur patience of reading this long thread
ALL CREDIT GOES TO MILESTONE
I do seen someone post guide for overclock i9100g in chinese forum. He only manage to oc cpu but cannot oc the gpu. The link is here.http://bbs.gfan.com/android-3892668-1-1.html
hendavi said:
I do seen someone post guide for overclock i9100g in chinese forum. He only manage to oc cpu but cannot oc the gpu. The link is here.http://bbs.gfan.com/android-3892668-1-1.html
Click to expand...
Click to collapse
Its the same method. Actually he has overclocked 800 mhz to 1008mhz and 1008mhz to 1228mhz which may be more harmfull and unstable. We are also duscussing the same thing. We want additional option «mpu_opps 1200« which is missing in our roms or kernel. In cpu status if u notice carefully we have mpu_opps till 1008 only.
Hi I'd like to clarify something.
I've used CF autoroot to get root access, which means I have stock ROM on. I've read elsewhere that in order to undervolt, you need to have a kernel that supports it. The stock ROM/kernel doesn't support undervolting right?
So if I want to undervolt, I must have a different kernel?
yes
Perseus Kernel allows you to undervolt
perseus like stock kernel !
What settings do i have to configure inorder to make cpu scaling less ( sampling and more specifically cpu freq changing )
.. and make it behave more like stock kernel ? ... i only need undervolt! and rest same as samsung defaults !
It seems the Interactive governor is not included in the stock kernel. Does anyone know if the kernel supports it and how do I install it? Thanks!
Guys is it possible to enable the Simple GPU governor on the stock kernel and configure it?
tried on trickster mod but it doesn't apply/tick nor does it let me configre it even with th paid version.
regards
This is my custom kernel for Dior(Redmi note 4G single SIM).Will work on all CM/AOSP based roms
Use "Kernel Aduitor" app from Play Store to change kernel parameters
To install,Download attached file and flash using recovery.No need to wipe anything!
Features/Changelog
V1.7
Compile with UBERTC GCC 4.9
Add Alucard Hotplug as default
Remove DEBUG_KERNEL and loads of debug and HID drivers.User RAM now 1876 MB
Remove unneded panel drivers
Note: If u want to sacrifice battery for performance,disable hotplug using Kernel Aduitor app
V1.5
Fix touch edge bug for some touchscreens
Compile with GCC 4.9
Remove GPU OC for now
Faux's Sound Control
Savoca's KCAL support for post processing control [v2]
Replace Qcom's MPDecision with Faux123's IntelliPlug hotplug(default)
Add new IO Schedulers: Sio,Sio+,Tripndroid,Zen
New CPU Governors: Smartmax,Darkness,Intellimm,Yankactive,Wheatley,SmartAssH3,Nightmare,Intellidemand,Asswax,Adaptive,Abyssplug,Abyssplygv2,Alucard,Lionheart
Even more RAM unlocked
ARM_UNWIND disabled
Use Ext4 for Ext2/3
V1.0
GPU OC to 480 Mhz
CPU OC upto 1693 Mhz
Removed some debug/bloat from kernel
More RAM available to user
Sources
https://github.com/sakindia123/android_kernel_xiaomi_dior
Thanks to Faheem Kamal,Wang Hao Yang and audahadi for device bringup
is this kernel will cause heating issue:what:
Is this kernel worth it or will it make the device more oven like cause I can barely play some games.. Like FTS2015..
TheAqib
Send from my RedMi Note4G
Awesome work Sarthak! Thanks a lot for your efforts.
Sent from my HM NOTE 1LTE using Tapatalk
Will you update this kernel?
Edit: ive seen your github. I hope the hotplugs are not messed up lol. Ive seen people make kernels with 2 hotplugs active lol. Will it still support cm12.1?
OldYellowBricks said:
Will you update this kernel?
Edit: ive seen your github. I hope the hotplugs are not messed up lol. Ive seen people make kernels with 2 hotplugs active lol. Will it still support cm12.1?
Click to expand...
Click to collapse
New update today or tomorrow.
I wont mess up the hotplugs :good:
V1.5 released.Edge touch fix included.See changelog in post#1
Did anybody test this kernel with latest MIUI 7?
Sent from my HM NOTE 1LTE using Tapatalk
Hi! Great kernel, but seems to be missing the "call touches while screen off problem" which is already fixed in faheem's kernel: https://github.com/faheemkamal/android_kernel_xiaomi_dior .
v1.7 released!
Just for CM/AOSP Roms?
Will this work on mokee 6.0?
Any plan to port from the current kernel source from 3.4 to lets say 3.10.x?
Hi! I'm on cm12.1, can I install this kernel? What are the instructions to install it? Will I lose my data? I have xposed installed.
pls update the camera drivers
in blisspop rom the camera goes fully black and then comes back multiple times when coming from sunlight to my home..
also will it work in 6.0 based roms ???
network problem
network reset while cellular data on.luckly i have install kernel auditor before flash this.change misc setting westwood to highspeed.n its seem okay for now.need to investigate more.i search kernel that can boost my gaming performance,but i too scared to try kernel auditor tweek.can u suggest to me.anyway thanks for this kernel.
@sakindia123 any plans to update the kernel..?
I tried on cm 11 ..its stable(some kind of spanish development) cpu Hotplugs were disabled by default .. .. But there was same lagg as it was before this kernel... And yes wifi stopped working too ...so yeah !!
Main error i found after installing this was my screen and home+back+menu buttons didnt work at all..
I'll try to see if it solves the touchscreen error, thanks!