Related
Hi All,
I'm newbie to the HP Touchpad, all i've done so far is update it to the latest webOS. How do i go about dual booting? I want to leave webOS untouched and have the option to boot into Andriod. There are so many different instructions and videos, can someone point me to a good up to date guide i can follow for dual booting? Also, which is the best version on Andriod for the HP Touchpad at the moment?
Regards
Phil
There's no simple one-click installation available, so start reading the thread under Development:
[GUIDE] Written CM9 Install Instructions
Read, download, re-read... and follow instructions closely and you will be there (i.e. getting CM9 (Android 4) install as the default boot option, but leaving WebOS untouched and to be picked instead).
Works fine, but with stated Android 4 restrictions.
/Decc
I say stick to CM7 and webOS, CM9 although looking GREAT is still buggy but that is my personal opinion. Both will install just the same way, all you have to do is replace the CM7 file with CM9.
The guide is here: http://forum.xda-developers.com/showthread.php?t=1305891
Definitely read everything through a few times to feel secure about what you are doing.
Stick with cm 7 3.5 it's a good stable build cm 9 is still in its early stages
And if you do decide to do it just read all the steps and re read them and take your time and you should have no problems
Deccard said:
There's no simple one-click installation available, so start reading the thread under Development:
[GUIDE] Written CM9 Install Instructions
Read, download, re-read... and follow instructions closely and you will be there (i.e. getting CM9 (Android 4) install as the default boot option, but leaving WebOS untouched and to be picked instead).
Works fine, but with stated Android 4 restrictions.
/Decc
Click to expand...
Click to collapse
is that guide still up to date? would like to dual boot and install android, leaving webOS untouched.
Cobra281 said:
is that guide still up to date? would like to dual boot and install android, leaving webOS untouched.
Click to expand...
Click to collapse
Here is good up to date http://rootzwiki.com/topic/31548-ho...-with-sound-camera-microphone-updated-121312/
This covers CM7/9/10 with links and video tutorial.
I upgraded my p1000 from cm10.2 to cm11 few weeks ago but the latest cm11 seems to be a bit laggish on my device and I'd like to go back to cm10.2, first of all... is it possible? If so, which is the proper way to do it?
mrfree2ita said:
I upgraded my p1000 from cm10.2 to cm11 few weeks ago but the latest cm11 seems to be a bit laggish on my device and I'd like to go back to cm10.2, first of all... is it possible? If so, which is the proper way to do it?
Click to expand...
Click to collapse
I'd recommend you try OmniROM Its what I'm using on my "P1" and although it has its share of problems. Wired Headsets don't seem to be working. Its no more worse then CM10 was, and on that note why CM10.2 which like CM10.1 was broken beyond use? The only decent CM10 was CM10 from 2013 - 02 - 03. Which AFAIK was the last fully working CM10 Mod for the P1000. As the 10.1 and .2 had the Camera Bugs.
In any case Omni is pretty well supported with near nightly, or at the lest every other night updates. As long as you don't get crazy with it with Live Wallpapers, like my Old man was trying to run on it. (He too has a P1000), its pretty damned responsive. But. Again you ONLY have 512MB of RAM on the P1000. In some rear cases even less then this!
In my Fathers case the same sh-- that was causing his CM11 to lag like heck, was the same crap that was making the fresh install of his CM10 (version as dated above!), lag just as bad. So you might want to first clean up such resource hungry Apps as you have first.
But, on the Latest OmniROM for the P1 (Int't GSM version), as of 06.08.14 (Which is still the the most current at the time I wrote this), just running the Google Now Launcher, and a few widgets. The Tablet doesn't feel any considerably slower then it did back in CM10, and the Google Now Launcher is a KEEPER! I can't imagine wanting to roll back to CM10.
P.s. Did you remember to reset your Firmware + wiping the Cache Partition, and Dalvik Cache? This could also partially explain your problems. If you, had not done this.
P.p.s. Download your ROM, and appropriate GAPPs Package, then reboot your P1000 by pressing both the Volume Up, and Power Button till you see the Galaxy Tab / Samsung Bootloader Screen. Then release the Power Button, while continuint to hold the Volume Up till you fully enter the Recovery Mode.
Once in the Recovery Mode do the following Factory Reset, then Wipe Cache Partition and the Dalvik Cache (Advanced Settings). Then install your CM10.x ROM from where you stored it i.e. the /Download Folder? And when thats though. Your GAPPs Package as well. After which you then boot into your new ROM. Which might take a few moments longer, on the first boot as the Database(s)? have to built from scratch again.
Mmmhh I think I'll follow your suggestion and I'll try OmniROM. Have you used the CWM recovery or the TWRP suggested on their official wiki to flash the omnirom?
mrfree2ita said:
Mmmhh I think I'll follow your suggestion and I'll try OmniROM. Have you used the CWM recovery or the TWRP suggested on their official wiki to flash the omnirom?
Click to expand...
Click to collapse
The way I described it before was for CWM. OmniROM uses TWRP. The ideas the same, in fact its a bit simpler on TWRP, in as far as it simplifies the wipe progress. Just One TIP download and install SuperSU, and run it. Once your rooted, go into your System Settings and click on the SuperSu Setting, (near the bottom), and it should ask you if you want to use a backup script, to keep root! You should run this if you want to... Need to keep Root for say AdAway. As OmniRom does NOT ship out with Root... WHY?! I can't say.
Other then that the only other annoying things I dislike about this ROM is that I have to keep uninstalling the Apollo Player. as well as reinstalling the Xposed Installer reset the "ro.config.low_ram" from true, to false, to re-enable transparencies, as well as other Lock Screen Widgets. After each update. Which again averages about every other day. I use something called ROM Toolbox Lite to do this, as trying to do this manually I always seem to gimp my install to a point of bootlooping.
But, other then these little niggles I actually like this ROM! for the most part.
And we should discourage question thread in development forum.
Sent from my GT-N7100 using XDA Free mobile app
Q&A for [ROMS][SGH-T679]Mass CM Thread
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
I noticed that the kernels are linked separately from the ROMs. Am I supposed to download and flash the kernels separately? I've flashed about half a dozen ROMs, but I've never flashed a kernel before. From what I've read, though, it sounds like following the same procedure. How about GApps? Do I need to download and flash those, too? And, if so, which pack should I use?
fajrero said:
I noticed that the kernels are linked separately from the ROMs. Am I supposed to download and flash the kernels separately? I've flashed about half a dozen ROMs, but I've never flashed a kernel before. From what I've read, though, it sounds like following the same procedure. How about GApps? Do I need to download and flash those, too? And, if so, which pack should I use?
Click to expand...
Click to collapse
Roms come with a kernel the kernel linked is just special some have overclock under volt etc etc.
Explains the kernel options.
If you do flash them do it after rom.
Gapps you dont technicly have to but yes. (for a standard setup flash gapps)And there should be a gapps linked at the start of rom. If not there will be soon.
Can't import contacts from SIM
Thanks! That clears up a lot.
I installed CM, and it looks very cool and smooth. But when I tried to import contacts from my SIM card, it said "No contacts". I thought maybe it was because I hadn't installed GApps, so I downloaded the "small" GApps package linked from the CM wiki and installed it from CWM. Still no contacts on the SIM card. Next, I thought that maybe my contacts actually weren't on my SIM for some reason. So, I booted back into CWM recovery and restored my previous system. Then, from the phone app, I went to Import/Export > Manage SIM card contacts. Sure enough, all of my contacts were there.
It seems like CM isn't reading my SIM. Any idea what's causing this?
Edit: Never mind. I found out that newer versions of Android don't allow you to store contacts locally. Somehow, the contacts got silently added without me having to import them, though. That's odd, because I don't remember allowing Google to store them in the cloud, and the SIM card appears blank... Oh, well, I installed MyLocalAccount, so I'll see if I can store the contacts locally that way.
@cars1189 running 10/18 build with 10/19(PAgapps micro) and 9/9k^k UV vhm kernel and have had no issues! Thanks for the great work, this runs solid and smooth!
I recently installed 10.2 and am loving it so far. One thing I ran into though was that the cLock widget was showing lots of wakelocks, so I disabled it and battery life has been great. Haven't run into any other issues (other than the screen staying on when off and charging), so this one is a keeper for me.
Didn't see this problem with 10.1, so curious if this is a known issue or not with the cLock widget? Also, are there any other planned updates coming for 10.2?
Thanks.
@RobbyG2112 I noticed it too when I was on 10.2 how ever I only ran it for a week maybe b4 going to cm11 I will say not sure if cars will update 10.2 but if you haven't tried cm11 its super stable and gets updated monthly!!
Thanks for confirming canodroid15, I wasn't sure what the lock screen would show when I disabled the widget but it put the default digital clock and date in it's place so it works out ok. I had disabled the weather and alarm widgets also so wasn't sure why having only the clock widget would cause wakelocks.
I'll probably get around to installing CM11 next, I'm a little slow on upgrading. I had been using CM10 for a long time and finally got tired of seeing the green preview pictures every time I used the camera so decided to go to CM10.1/10.2 recently.
Sure man, about the wakelocks you can try to catch it in a log. Enjoy 10.2 bro!!
kernel for cm11 (SGH-T679)
I recently installed @cars1189's CM11 10-4-14 build for the SGH-T679, with kernel 3.4.104-cyanogenmod-gda4bf58. It took a few tries, but it finally succeeded.
However, there's a slight issue in that I can't access my SIM card contacts. When I try to import from the dialer, it says "no contacts." I've searched around these threads and on the internet, and it seems that it is an issue with the kernel. Would it be possible for someone to recommend or point me to a compatible kernel that would fix that issue for me? Thank you so much for your help!
@valmeras I really don't think it has anything to do with the stock cm kernel but if your on 10/4/14 you can flash 9/9k^k kernels safely on that build about sim contacts idk I use my Google account to sync my contacts hope this helps good luck!
Edit: look for the rom & kernel dates/links in OP.
@canodroid15 - thanks for the response and suggestion. I'll give that kernel a try in the next few days. Not sure this is the solution, but hopefully that works. I've also seen some reference to SIM Tool Kit (STK), but I wasn't able to figure out if it that was the issue.
I would definitely use Google for syncing the contacts once I get this fixed, but for now, that's not possible because my phone is not able to read the SIM properly. I've tried saving a contact to the SIM, but I get an error like "unable to write, SIM is full" but I know for sure that's not the case. Alternatively, I might try to revive my old dumb phone and try to retrieve the contacts that way, then hopefully export that in some way.
@valmeras no prob man, if you have contacts on your sim and u put the sim in the dumb phone and export to storage u could then send a vcard via Bluetooth to the exhibit go into contacts and import from storage then Google sync good luck let me kno if u get it
So I flashed the kernel, but that didn't fix my issue. I do have some more free RAM now though
My old phone doesn't support exporting multiple contacts/vcards via bluetooth, but fortunately, Motorola has a contact exporter utility that exported everything into a CSV file to my laptop via USB. I had to install the drivers for the old phone to be recognised first. I was skeptical it would work given it was a new all-in-one driver thingie and my Motorola was quite old, but somehow it did! The whole process took several hours, but my contacts are now synced!
Sensors/rotation problem
Thanks for posting these ROMs! I just upgraded from Peach Sunrise and I'm really impressed with how well CM11 runs on this phone.
I want to report a problem I had and my solution for the next guy's benefit. With the latest 12-9-14 CM11 ROM, my sensors and compass didn't work correctly. The biggest symptom was auto-rotation did not work at all. Downgrading to the 9-9-14 ROM fixed everything. I didn't try any other ROMs, so they might work too.
Question about getting Google apps running on a SGH-T679
I installed CM 10.2 (cm-10.2-20140627-UNOFFICIAL-ancora_tmo) and it worked fine. I tried a couple different gapps downloads (doing a reinstall of CM10.2 between tries although I may have done that step incorrectly). But no matter what 4.3 gapps build I tried, Google Play Services would crash.
My main goal is to get to 4.3 or higher, so CM 10.2 or CM 11 would be great. (I'm open to other ROMs too. The only reason I'm choosing CM is because those are the only ROMs indicated as still maintained here: http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G )
My question is whether anyone has either CM version running on a T679 and which gapps did you use? I nearly bricked my phone and would like to know that someone else has gapps running okay before I try again.
Thanks!
EDIT: I followed the 2 following threads to install CM 11 with the PA pico gapp package and added a few other Google apps manually from the Play store. I also made sure to reboot several times to make sure everything got fully initialized.
http://forum.xda-developers.com/showthread.php?t=2542793
http://forum.xda-developers.com/showthread.php?t=2397942
masteff said:
Question about getting Google apps running on a SGH-T679
I installed CM 10.2 (cm-10.2-20140627-UNOFFICIAL-ancora_tmo) and it worked fine. I tried a couple different gapps downloads (doing a reinstall of CM10.2 between tries although I may have done that step incorrectly). But no matter what 4.3 gapps build I tried, Google Play Services would crash.
My main goal is to get to 4.3 or higher, so CM 10.2 or CM 11 would be great. (I'm open to other ROMs too. The only reason I'm choosing CM is because those are the only ROMs indicated as still maintained here: http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G )
My question is whether anyone has either CM version running on a T679 and which gapps did you use? I nearly bricked my phone and would like to know that someone else has gapps running okay before I try again.
Thanks!
EDIT: I followed the 2 following threads to install CM 11 with the PA pico gapp package and added a few other Google apps manually from the Play store. I also made sure to reboot several times to make sure everything got fully initialized.
http://forum.xda-developers.com/showthread.php?t=2542793
http://forum.xda-developers.com/showthread.php?t=2397942
Click to expand...
Click to collapse
Hey man! I hope you got it figured out! The only Gapps I use are PA Gapps! There are others but PA is the most complete package & has many options "IMO". You need to use a package that will fit your phone I use the micro package, or the nano. You need to use a package that matches your ROMs version, if your on 4.4.x then use 4.4.x Gapps. If on 4.3 use 4.3 Gapps. PA Gapps has a 4.3 package but its hard to find if you don't know where to look. 4.3 package can be found in the devs (Tkruzze) files on android file host, same place as the 4.4.x Gapps! Sorry if you didn't get answered b4 this I haven't been on this thread for weeks it seems! Hope this helps
So I've been trying out the CM11 OS2SD ROM (the last one in December), but I need to switch back as the bugs are just too much. I need my phone to work and stay charged, which is not happening on this ROM. And since it looks like CM12 is being worked on now that it's not likely the bugs in CM11 OS2SD will get fixed any time soon.
So first the problem. My USB socket on the phone is a little iffy, so I know that is where most of the problem is coming in. However, on the CM11 OS2SD ROM I'm using right now (the one dated 12/25) it frequently says it is plugged in, but is not charging. I've actually seen times where the battery monitor I'm using shows it has discharged the battery as much as 20% before I caught it, yet the status bar battery icon shows it as full and plugged in. On the older ROMs it didn't do this, so something isn't right with how the ROM handles the charging circuits in the phone. Plus, I've had frequent periods of "cpu hogging" (massive CPU load that doesn't seem to come from any one source and that doesn't seem to show up in OS Monitor) that can end up in a crash-reboot of the phone.
So as a result, I want to switch back to an older version of the CM11 ROM. I was using one of the November builds for quite a while, only having to put up with an occasional crash-reboot (the current ROM seems to do this at least every other day, the older one could go a whole week and maybe have it happen only once). What is the process to undo what was done to the phone for the OS2SD build to be loaded?
can't install
I have a problem after installing it via cwm and rebooting, the ensender shows me a screen where I order a factory reset but when I was I do not ensiende the phone
CM 12 Android is upgrading every boot
Ever since I flashed Cyanogenmod 12 every time I reboot it says "android is upgrading optimizing app 1 of 1" and it takes about 8 minutes. There are no odex files in data/app so that cant be the problem. Someone please help. The first time I flashed CM 12 I wiped data and factory reseted but since i seen this happen I flashed Cm 12 again but this time I formatted System, Data, Boot, and SDcard 0 but it still seems to happen. Also, recently my phone has been shutting off by itself every time I turn off the screen. And I know this isn't a hardware problem because the phone never turns off while music is playing with the screen off. It didn't start happening with CM 12. It was already happening with CM11 but it only started happening about a week ago. Im really thankful for cars1189 working on the rom and anyone else who worked on it. You guys are great. Hopefully you can help me out.
After having the HP Touchpad sitting on the shelf for one year, I decided to install a newer KitKat ROM to get rid of blacked out mail content and web pages that appeared after the initial move 2013 to KitKat 4.4
First I tried to figure out my current setup, because of what I learned a repartioning would be needed to support the current ROMS with there media/data structure that had been introduced with the newer builds.
I run CyanogenMod 11-20131118-UNOFFICIAL-tenderloin build-no. cm_tenderloin-userdebug 4.4 KRT16M 05dd1588ec test-keys with a 2.6.35 kernel on with moboot 038 and CWM 5026
SD-Card info shows 25,42 GB internal storage 1,48G
Back then I used tailor or a similiar tool to resize
A good info about the newer tools I found was lilyputing:
http://liliputing.com/2014/06/use-touchpad-toolbox-install-android-erase-webos-hp-touchpad.html
Wasn't sure about how to proceed while no updates showed up using the built-in updtae check function and of course Roland's Tutorials had been the first place I went heading to as well:
http://rootzwiki.com/topic/179730-r...-with-jcsullins-tptoolbox-the-super-easy-way/
Now I am stuck with getting TP Toolbox to work. Novacom still installed on the windows 7 box, but not connecting to the touchpad.
I booted into WebOs recovery using the moboot selector, but...
Leaving the WebOS recovery was done then by pressing the home and power buttons simultaneously for about 20secs until the tablet rebooted.
I guess I have to move on, leaving WebOS because support ends January 2015 and even connecting to google mail is getting complicated under WebOS.
The current ROM is not working well, so I need an update. Any suggestions?
BTW: I thought to move on to JCSullins ROM, because the 20141231 build had good feedback regarding stability and number of bugs, especially energy consumption. Anyway it doesn't show up any more on the list of downloadable ROMS since yesterday.
[email protected] said:
After having the HP Touchpad sitting on the shelf for one year, I decided to install a newer KitKat ROM to get rid of blacked out mail content and web pages that appeared after the initial move 2013 to KitKat 4.4
First I tried to figure out my current setup, because of what I learned a repartioning would be needed to support the current ROMS with there media/data structure that had been introduced with the newer builds.
I run CyanogenMod 11-20131118-UNOFFICIAL-tenderloin build-no. cm_tenderloin-userdebug 4.4 KRT16M 05dd1588ec test-keys with a 2.6.35 kernel on with moboot 038 and CWM 5026
SD-Card info shows 25,42 GB internal storage 1,48G
Back then I used tailor or a similiar tool to resize
A good info about the newer tools I found was lilyputing:
http://liliputing.com/2014/06/use-touchpad-toolbox-install-android-erase-webos-hp-touchpad.html
Wasn't sure about how to proceed while no updates showed up using the built-in updtae check function and of course Roland's Tutorials had been the first place I went heading to as well:
http://rootzwiki.com/topic/179730-r...-with-jcsullins-tptoolbox-the-super-easy-way/
Now I am stuck with getting TP Toolbox to work. Novacom still installed on the windows 7 box, but not connecting to the touchpad.
I booted into WebOs recovery using the moboot selector, but...
Leaving the WebOS recovery was done then by pressing the home and power buttons simultaneously for about 20secs until the tablet rebooted.
I guess I have to move on, leaving WebOS because support ends January 2015 and even connecting to google mail is getting complicated under WebOS.
The current ROM is not working well, so I need an update. Any suggestions?
BTW: I thought to move on to JCSullins ROM, because the 20141231 build had good feedback regarding stability and number of bugs, especially energy consumption. Anyway it doesn't show up any more on the list of downloadable ROMS since yesterday.
Click to expand...
Click to collapse
Maybe ask in proper thread and not development. http://forum.xda-developers.com/showthread.php?t=1431949
Assuming at some time soon a mod will lock this or move it...but until then...
Might want to check out the Evervolv 5 (Lollipop) ROM. It's the latest version of Android, and for the most part works well on the Touchpad. Otherwise, jcusllins, milaq and a few others have sustainable builds that are worth using if you want to stay on Kit Kat.
Been using Evervolv 5 for everything but work e-mail due to missing encryption, but otherwise I have no real issues with the builds.
--McBean
Could solve the install task. The novacom service had to be enabled first.
I'm wondering why some guides claim to use ACMEuninstaller to uninstall Android first. Tptoolbox will wipe cache and data anyway, right?
[email protected] said:
Could solve the install task. The novacom service had to be enabled first.
I'm wondering why some guides claim to use ACMEuninstaller to uninstall Android first. Tptoolbox will wipe cache and data anyway, right?
Click to expand...
Click to collapse
Thats the only way we had until tp toolbox was released with that capability.
Ah, I see.
Novacom provides similar functions like ADB more (or) less.
TPTOOLBOX needs to be pushed first. After initial setup the recovery mods do the job to install other ROMs, right?
I got Philz CWRM on the tablet. Is TWRP preferable?
With the jcsullins from november I cant get bluetooth to work and battery drain is high. Especially compared to WebOS which let me have the tablet in sleep mode for a week or so.
Now battery is going down in half a day. I think I give the A6 flush from TPTOOLBOX a try as soon as the december ROM from jcsullins is back online again to solve the bluetooth issue.
Hello .... I'm finding whatever OS I'm trying becoming unstable to use . So, I'm asking if there is any OS that is actually stable enough to use . I don't care whether it's an old version or what . I'm not using the tablet for games, just something I can browser the internet with . TIA
The one that has given me the fewest issues is https://forum.xda-developers.com/showthread.php?t=2712680 [ROM] [4.4.4] [CyanogenMod 11 by Jcsullins] [DM] [06/12/15]
everything works extremely well except the DSP manager when adjusting audio settings for the built in speakers where changes beyond the defaults do not have any effect on the audio.
Sadly many of the links are dead for things like gapps.
The ROM I use is cm-11-20151116-SNAPSHOT-jcsullins-tenderloin.zip
The gapps I use is: gapps-444-base-20160802-1-signed.zip
If needed, I can upload the gapps that I use though I am unsure if the forum has any rules surrounding it if I were to upload them to something like dropbox.
I try the others from time to time (easier for me since I really only use BSplayer and chrome in order to watch videos in a hover window while surfing the web (occasionally using my Bluetooth speakers or headphones).
Anyway, the main reason why I keep coming back to it, is the memory management. For many newer ROMs, you have issues such as the google calendar widget not working,or chrome not working properly, or when it is working, frequeny memory issues, especially if you want to upload an image to a site where it switches to the gallery app. by the time you select an image, it would fail to attach it because it will complain that the previous action could not be completed due to low memory.
With android 4.4, I do not have that issue. I don't know why it keeps happening for me since there are times when there will be over 100MB of free RAM, and chrome will still fail to do things with that error message.
Beyond that, the home screen under android 7.1.1 does not hold as many icons or widgets, even if you set the screen size to small, or adjust the dpi to 120. the home screen holds fewer icons and fewer widgets.
Overall, while it si great that newer versions of android are being supported, I feel that from a hardware standpoint then tablet has reached its limit with android 4.4
While there is also an evervolve version of android 4.4, for some reason it does not perform as well, even with more kernel features such as being able to overclock past 1.78GHz. it takes longer to boot, and some widgets do not work, along with issues with chrome.
https://forum.xda-developers.com/showpost.php?p=71176374&postcount=937
Check out the Nougat Evervolv thread. I've been using it, and it's fantastic.
Thanks for your input Razor512 .... And crazyates : Has this been updated since its first release, because when I gave it a go it was very unstable
Dude905 said:
Thanks for your input Razor512 .... And crazyates : Has this been updated since its first release, because when I gave it a go it was very unstable
Click to expand...
Click to collapse
Yes it has, but you need to download the nightly from their website. The XDA thread has an older version.
http://evervolv.com/devices/tenderloin
Ok, great news there crazyates. I installed evervolv from the YouTube guide, Do you know whether it still will work with those methods in the guide just as long I replace it with
ev_tenderloin-7.1.1-nightly-2017.03.03.zip and I believe you are using gapps-511-base-20161007-1-signed.zip , yes ? Thanks
YouTube >>> https://www.youtube.com/watch?v=ISWZ0c48gNA
Dude905 said:
Ok, great news there crazyates. I installed evervolv from the YouTube guide, Do you know whether it still will work with those methods in the guide just as long I replace it with
ev_tenderloin-7.1.1-nightly-2017.03.03.zip and I believe you are using gapps-511-base-20161007-1-signed.zip , yes ? Thanks
YouTube >>> https://www.youtube.com/watch?v=ISWZ0c48gNA
Click to expand...
Click to collapse
I'm not sure about the Youtube instructions, and I followed the written instructions on the forums.
Also, IIRC, if you're using a 7.1.1 ROM, you can't use a 5.1.1 Gapps. I would recommend downloading the newest 7.1.1 Gapps.
Here are the instructions I followed:
AlwaysLucky said:
If you end up having to start from scratch in TP Toolbox v0.42, follow these steps:
- Download a TP Toolbox Compatible ROM
- Download a TP Toolbox Compatible GApps
- Download a TP Toolbox Compatible TWRP
1. In the TP Toolbox v0.42 main menu, do a 'Complete Data Reset' to start from scratch
2. Select the 'Install Android' option from the main menu
3. Copy the 3 above files to the install folder after the TP is mounted
4. When given the option to adjust partition sizes, increase the System partition to at least 1312mb
5. Finish install, and reboot to TWRP
6. While in TWRP, flash the 9/6/16 TWRP 3.0.2.0 or the smaller 9/11/16 TWRP 3.0.2.0
7. Reboot into the new TWRP that you just flashed
8. In TWRP advanced wipe menu, wipe the System partition
9. While still in TWRP, flash the ROM from the OP along with some OpenGapps
10. Worship @jcsullins and @flintman, as they are your gods.
Click to expand...
Click to collapse
Here are the changes/differences I made/noticed:
crazyates said:
Step 3: While you're copying the older ROM/Gapps/TWRP into the "ttinstall" folder, I also copied everything you need for the new install into an "evervolv" folder. This way you can copy everything at once, and formatting a volume in TWRP doesn't destroy your install files.
Step 4: I have a 32GB TP, and don't use hardly any of it, so I increased the System to ~2GB, and the Cache to ~1GB. I figured going on the big side couldn't hurt.
Step 6: There's a newer version of Flintmans TWRP, 3.0.3.0(12/22/16).
Step 8: After you wipe the System, reformat the Data and Cache volumes as F2FS. Because your install files are on the External_SD instead of the Data, you can do this without recopying your install zips back again. I installed the system twice, once with Ext4 and once with F2FS. It feels snappier, and runs a lot better with F2FS.
Step 9: I used the Nightly build for the ROM, which is working great. Then the newest Gapps. Then I also flashed the SKZ overclock kernel at the same time.
Few other notes: Changing the Governor to LionHeart and Scheduler to Tripndroid made a noticeable difference for me. Also, because this doesn't have a lot of RAM, I gotta be careful with what I install, and how much I try to use it. Do NOT install Chrome from the app store. It will eat every bit of RAM available, and slow the whole thing down. I also use Greenify (with root permissions) to hibernate any app I can so it saves a lot of RAM that was as well. I'm using ~329MB (40%) for the system, with ~500MB (60%) available for apps.
Click to expand...
Click to collapse
@crazyates Did you try Evervolv 7.1 nightlies? I'm curious to read your experience feedback because I'm on it and getting tired of always having a non-responsive tablet. I might go back to 4.4 as I'll go mad otherwise.
bobcote said:
@crazyates Did you try Evervolv 7.1 nightlies? I'm curious to read your experience feedback because I'm on it and getting tired of always having a non-responsive tablet. I might go back to 4.4 as I'll go mad otherwise.
Click to expand...
Click to collapse
I am running the 7.1.1 nightlies. I haven't had any problems, and it's running very smooth. I'll randomly update it to the newest nightly, and haven't noticed any issues.
I do remember the time I first installed Evervolv 6.0 nightly last year. I installed it, and the touchscreen didn't work. At all. Looked into it, and it was a problem with that specific nightly build, so I went and reflashed everything with the one from the day before, and it worked great.
Anyways, all that to say it's working great, but it's still a nightly, so sometimes things go wonky.
I am still running a really old ICS build, and I noticed i can't update all my apps no more... what is the best Android version to run on the TP. Bluetooth is a must, but Camera isn't. Heard good things about 4.4.4 and 7.1.1, which one would you guys say runns smoother?
wprpalmeida said:
I am still running a really old ICS build, and I noticed i can't update all my apps no more... what is the best Android version to run on the TP. Bluetooth is a must, but Camera isn't. Heard good things about 4.4.4 and 7.1.1, which one would you guys say runns smoother?
Click to expand...
Click to collapse
Can't say much for 4.4.4, but I'm using 7.1.1 and it's great!
The only argument I could see making for 4.4.4 is if it runs a bit lighter than 7.1.1. These only have 1GB of RAM, so if 4.4.4 is capable of using less RAM for the android system, that means more RAM for apps. On the flip side, 7.1.1 uses such things as zRAM and KSM for better memory management, so it may be a wash.
crazyates said:
Can't say much for 4.4.4, but I'm using 7.1.1 and it's great!
The only argument I could see making for 4.4.4 is if it runs a bit lighter than 7.1.1. These only have 1GB of RAM, so if 4.4.4 is capable of using less RAM for the android system, that means more RAM for apps. On the flip side, 7.1.1 uses such things as zRAM and KSM for better memory management, so it may be a wash.
Click to expand...
Click to collapse
yeah, this is what I want to figure out. The developments in the Android codebase were quite extensive between these two releases, and the huge influx of budget phones in some markets (like mine for example) lead me to believe memory management would have been a key point in developing versions after 4.4.4. I'll give 7.1.1 a whirl and see how it goes.
Here are the instructions I followed:
...
Here are the changes/differences I made/noticed:
Click to expand...
Click to collapse
I tried to follow your instructions, but I get error messages like:
Error: unrecognized/unsopported zip 'FLINTMAN-TWRP-touch-data_media-SELINUX-f2fs-3.0.3.0-1-23-17.zip'
Error: Incompatible GAPPS/ROM versions None/7.0
I used the latest nightly (ev_tenderloin-7.1.1-nightly-2017.03.08.zip) and tried both open_gapps-arm-7.1-pico-20170312.zip and open_gapps-arm-7.1-pico-20170312, also I tried some of the TWRP-Versions you linked. I'm using TPToolbox v42 2015-01-08). So I wonder how you can figure out which versions fit together, I can remember this nagged me last time until I found a combination that worked...
AlwaysLucky said:
If you end up having to start from scratch in TP Toolbox v0.42, follow these steps:
- Download a TP Toolbox Compatible ROM
- Download a TP Toolbox Compatible GApps
- Download a TP Toolbox Compatible TWRP
1. In the TP Toolbox v0.42 main menu, do a 'Complete Data Reset' to start from scratch
2. Select the 'Install Android' option from the main menu
3. Copy the 3 above files to the install folder after the TP is mounted
Click to expand...
Click to collapse
Flexmaen said:
I tried to follow your instructions, but I get error messages like:
Error: unrecognized/unsopported zip 'FLINTMAN-TWRP-touch-data_media-SELINUX-f2fs-3.0.3.0-1-23-17.zip'
Error: Incompatible GAPPS/ROM versions None/7.0
Click to expand...
Click to collapse
Was that error message from TP Toolbox, or from TWRP? TP Toolbox won't recognize the newer TWRP images, nor will it recognize any 7.1 ROM/Gapps, so you need to use an older version to get things started. Once the older TWRP is installed, then you can use it to update to a newer version.
All in all, I had 8 ZIP files on my HP Touchpad to get a complete 7.1.1 install, but you can do it with as few as 6:
OLD ROM: CM 12.1
OLD Gapps: 5.1
OLD TWRP: 2.8.3.0
NEW ROM: Evervolv Nightly
NEW Gapps: 7.1
NEW TWRP: 3.0.3.0 F2FS
SKZ Kernel (Optional)
SuperSU (Optional)
Thank you! I installed the latest nightly, and it works fine so far.
The only thing I noticed that some apps now are blocking the device. This was also the case with the Android 4.4 Pac-Rom I used before. So it seems that some apps are using recources that aren't working well on the Touchpad at all, or that there is a general problem in several CM-versions.
For example the current version of Google Maps is so slow, you won't use it. I installend an older version (7.7.0), and this one works very fine. Also the new version of Maps lost the WiFi connection, which didn't cause any problem with the older version. So I wonder if there is some kind of incompatibility.
Another example: Fake GPS Location is much quicker than GPS-Emulator which also got stuck from time to time. Also the current Amazon App store was slooow.
Summary: Android 7.x runs fine so far, but you have to make sure that you get rid of the apps which block the device for some reason.
7.x is very slow some times.
Flexmaen said:
Thank you! I installed the latest nightly, and it works fine so far.
The only thing I noticed that some apps now are blocking the device. This was also the case with the Android 4.4 Pac-Rom I used before. So it seems that some apps are using recources that aren't working well on the Touchpad at all, or that there is a general problem in several CM-versions.
For example the current version of Google Maps is so slow, you won't use it. I installend an older version (7.7.0), and this one works very fine. Also the new version of Maps lost the WiFi connection, which didn't cause any problem with the older version. So I wonder if there is some kind of incompatibility.
Another example: Fake GPS Location is much quicker than GPS-Emulator which also got stuck from time to time. Also the current Amazon App store was slooow.
Summary: Android 7.x runs fine so far, but you have to make sure that you get rid of the apps which block the device for some reason.
Click to expand...
Click to collapse
When you say "blocking" you mean very slow? Since I uptaded from 4.4 to 7.x I've noticed that lots of apps are very slow. Some freezes for seconds and returns only when I block the device and turn on again. I dont know if its only on mine or its normal because of the old hardware. Is there any version that run real smooth? Or other system?
giolc90 said:
When you say "blocking" you mean very slow? Since I uptaded from 4.4 to 7.x I've noticed that lots of apps are very slow. Some freezes for seconds and returns only when I block the device and turn on again. I dont know if its only on mine or its normal because of the old hardware. Is there any version that run real smooth? Or other system?
Click to expand...
Click to collapse
Yes I mean very slow. Often so slow that it takes a minute until you can change to another app.
The Problem also existed on my 4.4 Pac Rom, so I guess it's rather caused by new apps who might expect some feature, like multicore, etc. Or it is some fault, that already existed in older custom roms. Not sure. However, I can recommend downgrading apps in this case, older versions often work like normal.
Flexmaen said:
Yes I mean very slow. Often so slow that it takes a minute until you can change to another app.
The Problem also existed on my 4.4 Pac Rom, so I guess it's rather caused by new apps who might expect some feature, like multicore, etc. Or it is some fault, that already existed in older custom roms. Not sure. However, I can recommend downgrading apps in this case, older versions often work like normal.
Click to expand...
Click to collapse
Perhaps using F2FS could help, if not currently using it?
crazyates said:
Was that error message from TP Toolbox, or from TWRP? TP Toolbox won't recognize the newer TWRP images, nor will it recognize any 7.1 ROM/Gapps, so you need to use an older version to get things started. Once the older TWRP is installed, then you can use it to update to a newer version.
All in all, I had 8 ZIP files on my HP Touchpad to get a complete 7.1.1 install, but you can do it with as few as 6:
OLD ROM: CM 12.1
OLD Gapps: 5.1
OLD TWRP: 2.8.3.0
NEW ROM: Evervolv Nightly
NEW Gapps: 7.1
NEW TWRP: 3.0.3.0 F2FS
SKZ Kernel (Optional)
SuperSU (Optional)
Click to expand...
Click to collapse
I guess there is a "new" method out there that can install Nougat 7.1.1 in as little as 3 zip files!!!
check it out, it comes with instructions and a new video...
I can name that tune in 3 zips!!
DoubleStuff said:
I guess there is a "new" method out there that can install Nougat 7.1.1 in as little as 3 zip files!!!
check it out, it comes with instructions and a new video...
I can name that tune in 3 zips!!
Click to expand...
Click to collapse
It doesn't work for me ... I'm having issues . First off I like to ask why he didn't use the latest Rom ? And the part with go to the PC Mounted Touchpad internal drive for the TWRP ? When I open the TWRP folder I don't see twrps file, why not ? There nothing in this folder, its empty . What I done was just placed those zip files in the TWRP folder . Afterwards once I do the final reboot to Evervolv it will just show those Evervolv lights flashing like its trying to load up but it doesn't, it just keeps continuously trying to load but it never does