[Q] Installing an hboot - One (M7) Q&A, Help & Troubleshooting

As with many people on here I am having problems with 8.1 & HTC one fasboot for the usb 2.
I want to put on the 1.55 hboot to hopefully cure my problems but I am not sure how to go about it?
Do I need to relock my bootloader or not?
What else do I need to do?
Ta

@home said:
As with many people on here I am having problems with 8.1 & HTC one fasboot for the usb 2.
I want to put on the 1.55 hboot to hopefully cure my problems but I am not sure how to go about it?
Do I need to relock my bootloader or not?
What else do I need to do?
Ta
Click to expand...
Click to collapse
The safest way is to flash a supported RUU for your phone, while s-on. If there are no RUUs, then you can go s-off and flash any RUU you want. Otherwise, you can search for HBOOTs or firmwares. Be very careful while flashing and never go back s-on while on a custom firmware/hboot.

n1234d said:
The safest way is to flash a supported RUU for your phone, while s-on. If there are no RUUs, then you can go s-off and flash any RUU you want. Otherwise, you can search for HBOOTs or firmwares. Be very careful while flashing and never go back s-on while on a custom firmware/hboot.
Click to expand...
Click to collapse
I'm s-on & trying to get s-off but I need to update theHboot hence my post...It's like a never ending circle this

@home said:
I'm s-on & trying to get s-off but I need to update theHboot hence my post...It's like a never ending circle this
Click to expand...
Click to collapse
What version are you on now? For s-off, it can be done on all current versions of hboot. Tell me what you want to do, and why, and I'll help you out
Sent from my iPod touch using Tapatalk

n1234d said:
What version are you on now? For s-off, it can be done on all current versions of hboot. Tell me what you want to do, and why, and I'll help you out
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
OK - Thanks
I'm on Hboot 1.54 & I am trying to get s-off. I have tried rummrunner s-off on an xp machine but it fails. I tried with ahrd & ahrd fully stock with bootloader locked & it just failed everytime....
When I plug my htc one in to my 8.1 I device not recognised I'm using the usb 2, so I tried all the above with Windows 7 but all still failed so i want to update the hboot & I wanted to know if I needed to relock the b-loader or not.
Ta

@home said:
OK - Thanks
I'm on Hboot 1.54 & I am trying to get s-off. I have tried rummrunner s-off on an xp machine but it fails. I tried with ahrd & ahrd fully stock with bootloader locked & it just failed everytime....
When I plug my htc one in to my 8.1 I device not recognised I'm using the usb 2, so I tried all the above with Windows 7 but all still failed so i want to update the hboot & I wanted to know if I needed to relock the b-loader or not.
Ta
Click to expand...
Click to collapse
What CID are you? Do you have a nandroid? If yes, then restore the nandroid, and try getting s-off on a windows 7/8 machine with USB 2.0 ports and adb/fastboot drivers already installed, and htc sync removed. You need to be bootloader unlocked, so locking your bootloader was a step backwards.
Do this
1. On a windows 7/8(not 8.1) machine, install htc sync (the latest available) and reboot, then uninstall htc sync, but leave htc driver installer as it is. Then connect your phone (usb 2.0 port) while usb debugging is enabled, let it install the driver. Then reboot to bootloader, make sure it shows fastboot USB, and let it install the driver.
2. Unlock your bootloader, flash a custom recovery
3. Restore your nandroid/search for a guru reset rom here www.htc1guru.com
4. Go to rumrunner.us and follow all the instructions there.
Done
Ps, if I helped you, press the thanks button
Sent from my iPod touch using Tapatalk

n1234d said:
What CID are you? Do you have a nandroid? If yes, then restore the nandroid, and try getting s-off on a windows 7/8 machine with USB 2.0 ports and adb/fastboot drivers already installed, and htc sync removed. You need to be bootloader unlocked, so locking your bootloader was a step backwards.
Do this
1. On a windows 7/8(not 8.1) machine, install htc sync (the latest available) and reboot, then uninstall htc sync, but leave htc driver installer as it is. Then connect your phone (usb 2.0 port) while usb debugging is enabled, let it install the driver. Then reboot to bootloader, make sure it shows fastboot USB, and let it install the driver.
2. Unlock your bootloader, flash a custom recovery
3. Restore your nandroid/search for a guru reset rom here www.htc1guru.com
4. Go to rumrunner.us and follow all the instructions there.
Done
Ps, if I helped you, press the thanks button
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
OK Thanks.
I will give it a go but it'll be the weekend.
Thanks

Related

Help, Back to stock for repair, cracking me up aarghhhhhh

Hi guys i knew the ins and out of my galaxy S3, but need help with my htc one
I know this is a big ask but having a real bad time trying to get this sorted, but need to get back to stock for new digitizer replacement.
i am running ARHD 11 with unlocked bootloader S-off, latest firmware. and twrp on my UK HTC_001
Is there a full guide to get me back to stock, as i have trawled through the forum and have about 10 tabs with various information but its getting to confusing as to what to do first with out bricking my phone.
i tried to do my stock nandroid backup first but that gave me no touchscreen function, not sure if that's because i have updated to the latest firmware, so had to flash ARHD back to get touchscreen function agian.
i then relocked the bootloader and that wiped my phone so had no system to boot into just cwm recovery. Tried to sideload rom but that didn't work adb error closed.
then i fastboot flash twrp, and then usb otg flashed arhd 11 from usb stick, working agian.
this is doing my head in, been at this for 3 days and getting nowhere
in what order do i go about this to get to full stock without bricking
need to be S-on
locked bootloader
revone locked not relocked
stock uk HTC_001 unbranded rom
unroot.
Big thanks in advance guys if you can help.
You should be able to install a 401 RUU and then
./revone -l
fastboot oem writesecureflag 3
thanks benpope, need a bit more of a guide dude,
not sure what RUU i need, my phone is uk unbranded htc_001
do i fastboot the RUU rom?
revone-l , is to turn relocked to locked i guess
thanks
Sent from my iPad using Tapatalk HD
I would gain S-off and unlock bootloader again then flash this RUU in fastboot
http://bugsylawson.com/files/file/1...13323127-1031113105-release-310878-signedexe/
RUU (ROM Update Utility)
Connect your device to the PC
Open/run the RUU and follow on screen instructions.
Set up your phone once it reboots then check for software update and you should get the 1.29.401.12 update.
When you have installed the update you can use revone to set S-on and lock your bootloader.
./revone -l
fastboot oem writesecureflag 3
This is what I did and it worked for me.
jake460 said:
Hi guys i knew the ins and out of my galaxy S3, but need help with my htc one
I know this is a big ask but having a real bad time trying to get this sorted, but need to get back to stock for new digitizer replacement.
i am running ARHD 11 with unlocked bootloader S-off, latest firmware. and twrp on my UK HTC_001
Is there a full guide to get me back to stock, as i have trawled through the forum and have about 10 tabs with various information but its getting to confusing as to what to do first with out bricking my phone.
i tried to do my stock nandroid backup first but that gave me no touchscreen function, not sure if that's because i have updated to the latest firmware, so had to flash ARHD back to get touchscreen function agian.
i then relocked the bootloader and that wiped my phone so had no system to boot into just cwm recovery. Tried to sideload rom but that didn't work adb error closed.
then i fastboot flash twrp, and then usb otg flashed arhd 11 from usb stick, working agian.
this is doing my head in, been at this for 3 days and getting nowhere
anks in advance guys if you can help.
Click to expand...
Click to collapse
If i were you i would write superCID from here http://forum.xda-developers.com/showthread.php?t=2317536. leave S-Off as it is and only lock the bootloader and then just flash the latest WWE RUU and you`re done. Unless you have a problem with your phone and need to turn it in for repair.
Cheers guys will give it a go in the morning, on nightshift at the mo
Sent from my HTC One using xda app-developers app
Getting stuck at RUU error 170 usb cable connection, must be a driver error.
Sent from my HTC One using xda app-developers app
Adb updated, htc drivers, HTC sync, pdanet installed but still getting RUU ERROR 170 usb cable not connected when trying to run Ruu Rom. Adb devices dosent see my device, it did 2 days ago.
No driver installs when I plug phone into pc in bootloader mode, pdanet used to pop up too, but dosent any more, reinstalled them all but still the same, even used cccleaner to fix registries.
Any advice on this one thanks.
Sent from my HTC One using xda app-developers app
jake460 said:
Adb updated, htc drivers, HTC sync, pdanet installed but still getting RUU ERROR 170 usb cable not connected when trying to run Ruu Rom. Adb devices dosent see my device, it did 2 days ago.
No driver installs when I plug phone into pc in bootloader mode, pdanet used to pop up too, but dosent any more, reinstalled them all but still the same, even used cccleaner to fix registries.
Any advice on this one thanks.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I have a zip you can flash which will fully hard brick your phone with no chance of HTC recovery if you need it, will probably result in a new phone and not just a new touchscreen.
MacHackz said:
I have a zip you can flash which will fully hard brick your phone with no chance of HTC recovery if you need it, will probably result in a new phone and not just a new touchscreen.
Click to expand...
Click to collapse
PM sent
Sent from my HTC One using xda app-developers app
Please send me that zip...I need to return my phone to htc
Sent from my HTC One using xda app-developers app
need latest WWE RUU exe, is it 1.29
anyone have a link, done search, but not sure which is latest.
cant run 1.28 RUU as gives me bootloader error which i think is due to upgrading to custom firmware.
thanks.
jake460 said:
need latest WWE RUU exe, is it 1.29
anyone have a link, done search, but not sure which is latest.
cant run 1.28 RUU as gives me bootloader error which i think is due to upgrading to custom firmware.
thanks.
Click to expand...
Click to collapse
If you have S-off you will not get the bootloader error.
Was s-off but trying to get to stock, long story but updated firmware few weeks back, now locked bootloader to do Ruu but some how got s-off and can't get s-on due to updated firmware or need updated revone
Sent from my HTC One using xda app-developers app
So is there a RUU WWE htc_001 1.29 that has the latest firmware that matches the custom firmware i updated to from mike86 firmware page.
Thanks
Sent from my HTC One using xda app-developers app
MacHackz said:
I have a zip you can flash which will fully hard brick your phone with no chance of HTC recovery if you need it, will probably result in a new phone and not just a new touchscreen.
Click to expand...
Click to collapse
Man, that's dark.
Is this confirmed? Has anybody flashed this, then sent their phone for warranty repair?
My phone, as far as I could tell was hard bricked (AOSP), but HTC was able to pull up my bootloader to tell me they were gonna need $200 to replace my main board.
It has been confirmed as it was initially flashed accidentally by someone. However, I won't be sharing the link as I feel it isn't morally right to do it

[Q] about the S-OFF 1.55

Hello
I have HTC ONE M7 with ViperOne 4.0.0 and i have TWRP and S-ON.
i want to S-OFF My device but i heard that if i got :
OS - 3.63.709.3
at the bootloader screen i can't s-off my device.
this is true?
I've also heard that if i have a costume ROM or Recovery (Or both) I can't either...
Need answers
tonty1 said:
Hello
I have HTC ONE M7 with ViperOne 4.0.0 and i have TWRP and S-ON.
i want to S-OFF My device but i heard that if i got :
OS - 3.63.709.3
at the bootloader screen i can't s-off my device.
this is true?
I've also heard that if i have a costume ROM or Recovery (Or both) I can't either...
Need answers
Click to expand...
Click to collapse
custom rom and recovery are fine you also need Root
let us know if it works
clsA said:
custom rom and recovery are fine you also need Root
let us know if it works
Click to expand...
Click to collapse
But what about the OS Version?
i've read that only this versions can do it:
1.29.707.4
2.24.111.3
2.24.111.5
2.24.161.1
2.24.401.1
2.24.401.8
2.24.401.9
2.24.708.4
2.24.709.1
2.24.771.3
3.17.502.3
3.18.709.2
3.23.666.1
Someone please?
tonty1 said:
Someone please?
Click to expand...
Click to collapse
x.xx.709.x is in your list it should work
My recommendation is to install rumrunner using 32 bit ubuntu. Not 64. No worries about drivers.. you don't have to install ubuntu, just put it on a disk or usb, boot into it and select try instead of install. After days of tryng different methods, computers and versions of windows, ubuntu worked the first time . Rumrunner has a version for ubuntu and instructions on their site
Sent from my HTC One using xda app-developers app
can we post outside links? >.> i hope we can here try this http://rumrunner.us/downloads-2/
clsA said:
x.xx.709.x is in your list it should work
Click to expand...
Click to collapse
For sure? if it wont , the phone can brick or something?
im on 3.63 and i was able to S-OFF my phone.
So..
I tried to do that and its says after the dots:
ERROR: run rumrunner again and READ (no adb connection to device. Debugging on
Drivers?)
Press ENTER to exit
Drivers installed.
There is ADB Connection.
Debugging on.
1) are you on windows or linux
2) if your on windows make sure you reboot to fastboot first and connect cable so it can install the second driver
3) also watch the phone when its running at one point you have to allow the computer to connect in a higher mode or it will fail and still might but after you allow/accept this mode it should be good to go
I was able to set S-OFF on my ATT HTC One. I would suggest to make sure the drivers you have is the latest.
1. Android SDK - http://developer.android.com/sdk/index.html
2. Search the xda forums for latest compatible driver for your PC. Here's a thread with a collection of windows drivers - http://forum.xda-developers.com/showthread.php?t=2089508
3. Make sure to see your phone appear in Device Manager when connected (if using Windows OS).
4. You can also use the following command after the Android SDK "platform-tools" is installed & phone connected: adb devices
Hope this help.

[Q] Can i convert my Htc one with Vodafone Cid to Stock and receive ota updates?

Can i convert my Htc one with Vodafone Cid to Stock and receive ota updates?
shaktihtcone said:
Can i convert my Htc one with Vodafone Cid to Stock and receive ota updates?
Click to expand...
Click to collapse
Both cid # and mid # MUST match the main-ver you want to flash. CID and MID require s-off to be modified.
i.e if you have a x.xx.161.x main-ver, you need corresponding MID PN0710000 and one of compatible CID like VODAP001 or VODAP102, etc... (Vodafone)
i.e if you have a x.xx.401.x main-ver, you need corresponding MID PN0710000 and one of compatible CID like HTC__001 or HTC__101, HTC__203 etc... (stock international)
If you have a CID that doesn't match your main-ver, your phone will not find any OTA update
If you have proper CID but wrong MID, your phone will find and download OTA, but will fail the update process.
f you want to convert using a RUU, both CID and MID must match otherwise the ruu will not flash.
copy/paste the output of this command
Code:
fastboot getvar all
minus emei and sn and it will be much easier to tell you what options you have.
shaktihtcone said:
Can i convert my Htc one with Vodafone Cid to Stock and receive ota updates?
Click to expand...
Click to collapse
the correct answer to your question is YES
(i couldnt resist)
Thanks for replying, and my cid is voda001, could u pls let me know the whole procedure of how to do that and where can i get the required softwares.
Thanks in advance:fingers-crossed:
And i'm totally new to this, so just wanna know after the whole procedure is completed will there be any problems?
And does it need rooting?
If u could give the detailed procedure it would be of gr8 help.
shaktihtcone said:
Thanks for replying, and my cid is voda001, could u pls let me know the whole procedure of how to do that and where can i get the required softwares.
Thanks in advance:fingers-crossed:
Click to expand...
Click to collapse
you want to convert to stock international? Stock GPE? Stock dev edition? what is your hboot version?
alray said:
you want to convert to stock international? Stock GPE? Stock dev edition? what is your hboot version?
Click to expand...
Click to collapse
Stock International, so that i could receive kitkat which has already been delivered to international unlocked phones.
And my hboot version is 1.55.0000
shaktihtcone said:
Stock International, so that i could receive kitkat which has already been delivered to international unlocked phones.
And my hboot version is 1.55.0000
Click to expand...
Click to collapse
Fisrt of all, do you have ADB and Fastboot installed on your computer and HTC one drivers working properly?
alray said:
Fisrt of all, do you have ADB and Fastboot installed on your computer and HTC one drivers working properly?
Click to expand...
Click to collapse
Sorry, but i don't have either of them installed as i don't know how to use them
And i Do have HTC Sync manager installed, so i guess HTC drivers are working properly.
shaktihtcone said:
Sorry, but i don't have either of them installed as i don't know how to use them
Click to expand...
Click to collapse
Np, just want to go step by step, that is why im asking you
shaktihtcone said:
And i Do have HTC Sync manager installed, so i guess HTC drivers are working properly.
Click to expand...
Click to collapse
Yes it should
So go to this thread and install adb/fastboot.
turn on usb debugging mode on your phone ''settings ---> developer option ---> check the usb debug box'' if developer option menu is messing from you settings menu do this: settings ---> about phone ---> tap the build number rapidly until you are prompted you unlocked developers option.
connect phone to pc via usb while phone is normally booted in Android (better to use port behind the pc instead of usb port in front. also i will recommend you not to use a windows 8.1 computer.
quote me when this step is done. (use reply below my post so i can see you replied)
alray said:
Np, just want to go step by step, that is why im asking you
Yes it should
So go to this thread and install adb/fastboot.
turn on usb debugging mode on your phone ''settings ---> developer option ---> check the usb debug box'' if developer option menu is messing from you settings menu do this: settings ---> about phone ---> tap the build number rapidly until you are prompted you unlocked developers option.
connect phone to pc via usb while phone is normally booted in Android (better to use port behind the pc instead of usb port in front. also i will recommend you not to use a windows 8.1 computer.
quote me when this step is done. (use reply below my post so i can see you replied)
Click to expand...
Click to collapse
Done and also i have windows 8.1 installed. Will there be any prob? Or can i continue?
shaktihtcone said:
Done and also i have windows 8.1 installed. Will there be any prob? Or can i continue?
Click to expand...
Click to collapse
You'll probably encounter problem later in the process with win 8.1. Win 8.1 require hboot 1.55 for fastboot to work. During the process you will need to downgrade hboot to 1.44 to flash the international RUU. And your phone will not be recognized by computer when using fastboot and you will be stuck there. So better to find a windows 7 computer or maybe you could dual boot win 7 on the same comp.
now you should be able to continue with next step even with win 8.1
so start Minimal ADB and Fastboot, a command prompt should open. with phone connected to pc and usb debugging enabled, check that drivers are working properly with this command:
Code:
adb devices
should output this:
Code:
List of devices attached
HT(yourserial#) device
alray said:
You'll probably encounter problem later in the process with win 8.1. Win 8.1 require hboot 1.55 for fastboot to work. During the process you will need to downgrade hboot to 1.44 to flash the international RUU. And your phone will not be recognized by computer when using fastboot and you will be stuck there. So better to find a windows 7 computer or maybe you could dual boot win 7 on the same comp.
now you should be able to continue with next step even with win 8.1
so start Minimal ADB and Fastboot, a command prompt should open. with phone connected to pc and usb debugging enabled, check that drivers are working properly with this command:
Code:
adb devices
should output this:
Code:
List of devices attached
HT(yourserial#) device
Click to expand...
Click to collapse
Hope this is what u were asking earlier.
shaktihtcone said:
Hope this is what u were asking earlier.
Click to expand...
Click to collapse
so now you have to
unlock your bootloader
install a custom recovery + root
gain s-off using rumrunner
note that unlocking bootloader may void your warranty as advised by htc on htcdev.com
alray said:
so now you have to
unlock your bootloader
install a custom recovery + root
gain s-off using rumrunner
Click to expand...
Click to collapse
So does this procedure requires rooting?
And if it does how can a rooted device receive updates from HTC?
And once the whole procedure is complete will my HTC One be still rooted?
And i could get a window 7 pc tomorrow , so will continue the remaining procedure tomorrow.
If u could pls give the detailed procedure, i would perform it tomorrow and will let u know .
Thank u so much for helping out.
shaktihtcone said:
So does this procedure requires rooting?
Click to expand...
Click to collapse
Yes you need root to s-off. You need s-off to change cid and downgrade hboot. you need to change cid and downgrade hboot to flash international ruu.
shaktihtcone said:
And if it does how can a rooted device receive updates from HTC?
Click to expand...
Click to collapse
When you will flash the international RUU.exe, your device will go back to 100% stock (stock recovery, stock OS, stock hboot) means no root anymore like if your device was brand new.
shaktihtcone said:
And once the whole procedure is complete will my HTC One be still rooted?
Click to expand...
Click to collapse
no the ruu.exe will remove root. You can always re-root if you need root after all that procedure and after downloaded the latest OTA
shaktihtcone said:
And i could get a window 7 pc tomorrow , so will continue the remaining procedure tomorrow.
If u could pls give the detailed procedure, i would perform it tomorrow and will let u know .
Click to expand...
Click to collapse
after you gained S-OFF:
Change your CID
Code:
fastboot oem writecid HTC__001
fastboot reboot-bootloader
note there is 2 lower cases H T C _ _ 0 0 1
confirm cid has changed
Code:
fastboot oem readcid
and then follow this guide to downgrade hboot, removed tempered flag from hboot, lock bootloader and flash the ruu.exe. Use this RUU.exe for international
shaktihtcone said:
Thank u so much for helping out.
Click to expand...
Click to collapse
Just hit the thanks button if I helped
edit: And don't go back to S-ON the ruu will not turn S-On, it can manually be done but stay S-OFF!
just a quick note, after "fastboot oem writecid HTC__001"
do a "fastboot reboot-bootloader" and continue with @alray
(sorry if i bugged in)
nkk71 said:
just a quick note, after "fastboot oem writecid HTC__001"
do a "fastboot reboot-bootloader" and continue with @alray
(sorry if i bugged in)
Click to expand...
Click to collapse
your help is always welcome
shaktihtcone said:
Thank u so much for helping out.
Click to expand...
Click to collapse
on @alray's behalf: you're welcome, and if you want to thank him because his posts are useful you can hit the THANKS button on his posts
shaktihtcone said:
So does this procedure requires rooting?
And if it does how can a rooted device receive updates from HTC?
And once the whole procedure is complete will my HTC One be still rooted?
And i could get a window 7 pc tomorrow , so will continue the remaining procedure tomorrow.
If u could pls give the detailed procedure, i would perform it tomorrow and will let u know .
Thank u so much for helping out.
Click to expand...
Click to collapse
for s-off which procedure should i follow as mine is uk vodafone model?
verizon one or international one? or any other?

[Q] HTC One stuck in bootloader with relocked bootloader, s-on and custom recovery

​my htc one is stuck in the bootloader with the tampered banner on it, RELOCKED bootloader and also s-on. I have a viper one ROM on it an a twrp custom recovery.. now funny story I guarantee you will laugh. I knew the htc oem update was coming soon so I could get lollipop but I was rooted and couldn't do it. So I was trying to get s-off on my device but I missed a step on some gadget hacks tutorial and locked the bootloader (thats the funny part) then I tried unlocking it again but it didn't work. I tried going into recovery but it just rebooted back to the bootloader. I tried everything in the bootloader options and nothing worked.
​my Hboot is version 1.57 and my OS is 6. 10.531.9
​I tried flashing a recovery again and I cant do it it says "error cannot load--" and the same with the Unlock_code.bin it just wasn't working? what am I doing wrong and how can i fix it. please its urgent
​if you have any answers you can comment here and also e-mail me at [email protected] (I would usually say text me :crying: ) once again please help I don't know what to do next.
kage_outram said:
​my htc one is stuck in the bootloader with the tampered banner on it, RELOCKED bootloader and also s-on. I have a viper one ROM on it an a twrp custom recovery.. now funny story I guarantee you will laugh.
I knew the htc oem update was coming soon so I could get lollipop but I was rooted and couldn't do it. So I was trying to get s-off on my device but I missed a step on some gadget hacks tutorial and locked the bootloader (thats the funny part) then I tried unlocking it again but it didn't work. I tried going into recovery but it just rebooted back to the bootloader. I tried everything in the bootloader options and nothing worked.
​my Hboot is version 1.57 and my OS is 6. 10.531.9
​I tried flashing a recovery again and I cant do it it says "error cannot load--" and the same with the Unlock_code.bin it just wasn't working? what am I doing wrong and how can i fix it. please its urgent
​if you have any answers you can comment here and also e-mail me at [email protected] (I would usually say text me :crying: ) once again please help I don't know what to do next.
Click to expand...
Click to collapse
Since, you are S-ON with a locked bootloader run this RUU 6.10.531.10. It will put you back at stock, then you can try to unlock you bootloader. To get S-OFF you will need to use Sunshine with your hboot 1.57.
majmoz said:
Since, you are S-ON with a locked bootloader run this RUU 6.10.531.10. It will put you back at stock, then you can try to unlock you bootloader. To get S-OFF you will need to use Sunshine with your hboot 1.57.
Click to expand...
Click to collapse
What commands do I put in to add the RUU
kage_outram said:
What commands do I put in to add the RUU
Click to expand...
Click to collapse
Download the RUU to your Windows computer
Connect the phone to the computer via USB
Boot into Bootloader/FASTBOOT USB on your phone
Double-click the RUU on your computer
majmoz said:
Download the RUU to your Windows computer
Connect the phone to the computer via USB
Boot into Bootloader/FASTBOOT USB on your phone
Double-click the RUU on your computer
Click to expand...
Click to collapse
what should happen next

Restore to Stock

I have a (sprint) H/K edition M8 running 4.4.2 rooted with TWRP recovery, s-on with 1.54.654.13 & SPCS-004. I wish to return to stock to get the Lollipop update and then return to root. Im at a loss as to what to do please help any advice is appreciated.
Check out the thread in the link below. Use the RUU for the HK Lollipop update. You'll need to relock your bootloader before running the RUU. After running the RUU you'll need to unlock your bootloader and reinstall TWRP. You can then flash a ROM.
http://forum.xda-developers.com/showthread.php?t=2729173
How would i lock my bootloader without getting s-off? The only way i know of to do it is to pay for Sunshine.
AlexN18 said:
How would i lock my bootloader without getting s-off? The only way i know of to do it is to pay for Sunshine.
Click to expand...
Click to collapse
Connect your phone to your computer. Run the command fastboot oem lock. That will relock your bootloader.
My adb isnt recognizing my phone, have the stock google drivers & htc drivers installed and ive tried with my phone both powered on and in fastboot. I believe there might be a driver issue but im not really sure
AlexN18 said:
My adb isnt recognizing my phone, have the stock google drivers & htc drivers installed and ive tried with my phone both powered on and in fastboot. I believe there might be a driver issue but im not really sure
Click to expand...
Click to collapse
Try this to get the drivers sorted.
Ive already had that installed idk what could be going on
Not to hijack the thread but how do I put it back to 100% stock so I can do a warranty return? I am mostly talking about how to remove s-off. I figure I need to have it back to s-on to do the warranty return.
Sent from my HTC One m8 running ViperOne 4.3.0
Phrostbite said:
Not to hijack the thread but how do I put it back to 100% stock so I can do a warranty return? I am mostly talking about how to remove s-off. I figure I need to have it back to s-on to do the warranty return.
Sent from my HTC One m8 running ViperOne 4.3.0
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/showthread.php?t=2826343
Okay, fixed the driver issues, this is what happens when i attempt it both from standard command window & adb command window
AlexN18 said:
Okay, fixed the driver issues, this is what happens when i attempt it both from standard command window & adb command window
Click to expand...
Click to collapse
You have to make sure you install the drivers in recovery,bootloader, and OS
ADB = OS and recovery
Fastboot = hboot/fastbootusb.
The waiting for device might be that you are not in fastbootusb
bootloader says RELOCKED, attempting to run RUU...
successful update, thanks for the help guys. Is there any way to get my on screen buttons changed to the new shape and to root again?
AlexN18 said:
successful update, thanks for the help guys. Is there any way to get my on screen buttons changed to the new shape and to root again?
Click to expand...
Click to collapse
You can install TWRP and root just like you were on any other update. Android version does not matter. Just make sure you unlock the bootloader again, you can use the same unlock token from HTC dev. Then you want to install recovery
Code:
fasboot flash recovery recovery.img
After that, from fastboot, boot into recovery and then reboot system. If you use a newer TWRP it will prompt you to install superSU.

Categories

Resources