[Q] about the S-OFF 1.55 - One (M7) Q&A, Help & Troubleshooting

Hello
I have HTC ONE M7 with ViperOne 4.0.0 and i have TWRP and S-ON.
i want to S-OFF My device but i heard that if i got :
OS - 3.63.709.3
at the bootloader screen i can't s-off my device.
this is true?
I've also heard that if i have a costume ROM or Recovery (Or both) I can't either...
Need answers

tonty1 said:
Hello
I have HTC ONE M7 with ViperOne 4.0.0 and i have TWRP and S-ON.
i want to S-OFF My device but i heard that if i got :
OS - 3.63.709.3
at the bootloader screen i can't s-off my device.
this is true?
I've also heard that if i have a costume ROM or Recovery (Or both) I can't either...
Need answers
Click to expand...
Click to collapse
custom rom and recovery are fine you also need Root
let us know if it works

clsA said:
custom rom and recovery are fine you also need Root
let us know if it works
Click to expand...
Click to collapse
But what about the OS Version?
i've read that only this versions can do it:
1.29.707.4
2.24.111.3
2.24.111.5
2.24.161.1
2.24.401.1
2.24.401.8
2.24.401.9
2.24.708.4
2.24.709.1
2.24.771.3
3.17.502.3
3.18.709.2
3.23.666.1

Someone please?

tonty1 said:
Someone please?
Click to expand...
Click to collapse
x.xx.709.x is in your list it should work

My recommendation is to install rumrunner using 32 bit ubuntu. Not 64. No worries about drivers.. you don't have to install ubuntu, just put it on a disk or usb, boot into it and select try instead of install. After days of tryng different methods, computers and versions of windows, ubuntu worked the first time . Rumrunner has a version for ubuntu and instructions on their site
Sent from my HTC One using xda app-developers app

can we post outside links? >.> i hope we can here try this http://rumrunner.us/downloads-2/

clsA said:
x.xx.709.x is in your list it should work
Click to expand...
Click to collapse
For sure? if it wont , the phone can brick or something?

im on 3.63 and i was able to S-OFF my phone.

So..
I tried to do that and its says after the dots:
ERROR: run rumrunner again and READ (no adb connection to device. Debugging on
Drivers?)
Press ENTER to exit
Drivers installed.
There is ADB Connection.
Debugging on.

1) are you on windows or linux
2) if your on windows make sure you reboot to fastboot first and connect cable so it can install the second driver
3) also watch the phone when its running at one point you have to allow the computer to connect in a higher mode or it will fail and still might but after you allow/accept this mode it should be good to go

I was able to set S-OFF on my ATT HTC One. I would suggest to make sure the drivers you have is the latest.
1. Android SDK - http://developer.android.com/sdk/index.html
2. Search the xda forums for latest compatible driver for your PC. Here's a thread with a collection of windows drivers - http://forum.xda-developers.com/showthread.php?t=2089508
3. Make sure to see your phone appear in Device Manager when connected (if using Windows OS).
4. You can also use the following command after the Android SDK "platform-tools" is installed & phone connected: adb devices
Hope this help.

Related

Blackrose Problem

Can anyone help me with this?
HTC Unlocked Bootloader
S-ON
Hboot 2.00.0000
Help is much appreciated.
You need to be S-OFF
Incredible2011 said:
Can anyone help me with this?
HTC Unlocked Bootloader
S-ON
Hboot 2.00.0000
Help is much appreciated.
Click to expand...
Click to collapse
Try Nik's new rom, I'm downloading now, According to nik post and users experience, this rom works on any hboot with any condition
Sent from my Incredible S using Tapatalk 2
somehow, the code will look into your device root folder /data/local/tmp/ and trying to create new folder and copy the hb file into it and flash it through the bootloader. the reason why the .exe is fail due to the blackrose can't access to the folder to paste the file and you see the cmd stuck and force exits.
i get mine done by:
1. 4ext touch recovery
2. IceColdSandwich 7.2.0 FAREWELL edition
make sure you get this done before you use the blackrose:
1. android SDK + platform tools and htc sync (drivers only) installed on your computer
2. your phone needs to be switched on normally.
3. connected via USB and in charge only mode with usb debugging switched on
if still not working, flash other rom and try again.
hope the developer will solve this problem for everyone.
Incredible2011 said:
Can anyone help me with this?
HTC Unlocked Bootloader
S-ON
Hboot 2.00.0000
Help is much appreciated.
Click to expand...
Click to collapse
This is development forum. Please move it to general.

[Q] only fastboot

can anyone help?
I have a htc incredible s (vivo) does not work, to turn it just goes into fastboot mode, I can not get into recovery and is s-on
vivo xa ship s-on rh
hboot 1.16.0000
radio 3805.09.03.27.m
emmc-boot
Have you ever tried to run some RUU?
nlooooo said:
Have you ever tried to run some RUU?
Click to expand...
Click to collapse
I thought about doing that, but in the repository that is here in the forum there are many and I do not know which to use or install it from the pc
If you want the latest version of ICS justgo to htcdev, kernel source code section, configure filter by device (choose Incredible S) and download any of three latest.
nlooooo said:
If you want the latest version of ICS justgo to htcdev, kernel source code section, configure filter by device (choose Incredible S) and download any of three latest.
Click to expand...
Click to collapse
and how must be installed?
It's an exe file, just install HTC sync on your PC, connect phone in fastboot mode to it, wait for drivers to install and run exe file.
nlooooo said:
It's an exe file, just install HTC sync on your PC, connect phone in fastboot mode to it, wait for drivers to install and run exe file.
Click to expand...
Click to collapse
thx, letme try these
Since you're from Mexico I think that LATAM version is suitable for you. However, all three RUU packs on htcdev contain the same RUU.

[Q] Installing an hboot

As with many people on here I am having problems with 8.1 & HTC one fasboot for the usb 2.
I want to put on the 1.55 hboot to hopefully cure my problems but I am not sure how to go about it?
Do I need to relock my bootloader or not?
What else do I need to do?
Ta
@home said:
As with many people on here I am having problems with 8.1 & HTC one fasboot for the usb 2.
I want to put on the 1.55 hboot to hopefully cure my problems but I am not sure how to go about it?
Do I need to relock my bootloader or not?
What else do I need to do?
Ta
Click to expand...
Click to collapse
The safest way is to flash a supported RUU for your phone, while s-on. If there are no RUUs, then you can go s-off and flash any RUU you want. Otherwise, you can search for HBOOTs or firmwares. Be very careful while flashing and never go back s-on while on a custom firmware/hboot.
n1234d said:
The safest way is to flash a supported RUU for your phone, while s-on. If there are no RUUs, then you can go s-off and flash any RUU you want. Otherwise, you can search for HBOOTs or firmwares. Be very careful while flashing and never go back s-on while on a custom firmware/hboot.
Click to expand...
Click to collapse
I'm s-on & trying to get s-off but I need to update theHboot hence my post...It's like a never ending circle this
@home said:
I'm s-on & trying to get s-off but I need to update theHboot hence my post...It's like a never ending circle this
Click to expand...
Click to collapse
What version are you on now? For s-off, it can be done on all current versions of hboot. Tell me what you want to do, and why, and I'll help you out
Sent from my iPod touch using Tapatalk
n1234d said:
What version are you on now? For s-off, it can be done on all current versions of hboot. Tell me what you want to do, and why, and I'll help you out
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
OK - Thanks
I'm on Hboot 1.54 & I am trying to get s-off. I have tried rummrunner s-off on an xp machine but it fails. I tried with ahrd & ahrd fully stock with bootloader locked & it just failed everytime....
When I plug my htc one in to my 8.1 I device not recognised I'm using the usb 2, so I tried all the above with Windows 7 but all still failed so i want to update the hboot & I wanted to know if I needed to relock the b-loader or not.
Ta
@home said:
OK - Thanks
I'm on Hboot 1.54 & I am trying to get s-off. I have tried rummrunner s-off on an xp machine but it fails. I tried with ahrd & ahrd fully stock with bootloader locked & it just failed everytime....
When I plug my htc one in to my 8.1 I device not recognised I'm using the usb 2, so I tried all the above with Windows 7 but all still failed so i want to update the hboot & I wanted to know if I needed to relock the b-loader or not.
Ta
Click to expand...
Click to collapse
What CID are you? Do you have a nandroid? If yes, then restore the nandroid, and try getting s-off on a windows 7/8 machine with USB 2.0 ports and adb/fastboot drivers already installed, and htc sync removed. You need to be bootloader unlocked, so locking your bootloader was a step backwards.
Do this
1. On a windows 7/8(not 8.1) machine, install htc sync (the latest available) and reboot, then uninstall htc sync, but leave htc driver installer as it is. Then connect your phone (usb 2.0 port) while usb debugging is enabled, let it install the driver. Then reboot to bootloader, make sure it shows fastboot USB, and let it install the driver.
2. Unlock your bootloader, flash a custom recovery
3. Restore your nandroid/search for a guru reset rom here www.htc1guru.com
4. Go to rumrunner.us and follow all the instructions there.
Done
Ps, if I helped you, press the thanks button
Sent from my iPod touch using Tapatalk
n1234d said:
What CID are you? Do you have a nandroid? If yes, then restore the nandroid, and try getting s-off on a windows 7/8 machine with USB 2.0 ports and adb/fastboot drivers already installed, and htc sync removed. You need to be bootloader unlocked, so locking your bootloader was a step backwards.
Do this
1. On a windows 7/8(not 8.1) machine, install htc sync (the latest available) and reboot, then uninstall htc sync, but leave htc driver installer as it is. Then connect your phone (usb 2.0 port) while usb debugging is enabled, let it install the driver. Then reboot to bootloader, make sure it shows fastboot USB, and let it install the driver.
2. Unlock your bootloader, flash a custom recovery
3. Restore your nandroid/search for a guru reset rom here www.htc1guru.com
4. Go to rumrunner.us and follow all the instructions there.
Done
Ps, if I helped you, press the thanks button
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
OK Thanks.
I will give it a go but it'll be the weekend.
Thanks

[Q] Can i convert my Htc one with Vodafone Cid to Stock and receive ota updates?

Can i convert my Htc one with Vodafone Cid to Stock and receive ota updates?
shaktihtcone said:
Can i convert my Htc one with Vodafone Cid to Stock and receive ota updates?
Click to expand...
Click to collapse
Both cid # and mid # MUST match the main-ver you want to flash. CID and MID require s-off to be modified.
i.e if you have a x.xx.161.x main-ver, you need corresponding MID PN0710000 and one of compatible CID like VODAP001 or VODAP102, etc... (Vodafone)
i.e if you have a x.xx.401.x main-ver, you need corresponding MID PN0710000 and one of compatible CID like HTC__001 or HTC__101, HTC__203 etc... (stock international)
If you have a CID that doesn't match your main-ver, your phone will not find any OTA update
If you have proper CID but wrong MID, your phone will find and download OTA, but will fail the update process.
f you want to convert using a RUU, both CID and MID must match otherwise the ruu will not flash.
copy/paste the output of this command
Code:
fastboot getvar all
minus emei and sn and it will be much easier to tell you what options you have.
shaktihtcone said:
Can i convert my Htc one with Vodafone Cid to Stock and receive ota updates?
Click to expand...
Click to collapse
the correct answer to your question is YES
(i couldnt resist)
Thanks for replying, and my cid is voda001, could u pls let me know the whole procedure of how to do that and where can i get the required softwares.
Thanks in advance:fingers-crossed:
And i'm totally new to this, so just wanna know after the whole procedure is completed will there be any problems?
And does it need rooting?
If u could give the detailed procedure it would be of gr8 help.
shaktihtcone said:
Thanks for replying, and my cid is voda001, could u pls let me know the whole procedure of how to do that and where can i get the required softwares.
Thanks in advance:fingers-crossed:
Click to expand...
Click to collapse
you want to convert to stock international? Stock GPE? Stock dev edition? what is your hboot version?
alray said:
you want to convert to stock international? Stock GPE? Stock dev edition? what is your hboot version?
Click to expand...
Click to collapse
Stock International, so that i could receive kitkat which has already been delivered to international unlocked phones.
And my hboot version is 1.55.0000
shaktihtcone said:
Stock International, so that i could receive kitkat which has already been delivered to international unlocked phones.
And my hboot version is 1.55.0000
Click to expand...
Click to collapse
Fisrt of all, do you have ADB and Fastboot installed on your computer and HTC one drivers working properly?
alray said:
Fisrt of all, do you have ADB and Fastboot installed on your computer and HTC one drivers working properly?
Click to expand...
Click to collapse
Sorry, but i don't have either of them installed as i don't know how to use them
And i Do have HTC Sync manager installed, so i guess HTC drivers are working properly.
shaktihtcone said:
Sorry, but i don't have either of them installed as i don't know how to use them
Click to expand...
Click to collapse
Np, just want to go step by step, that is why im asking you
shaktihtcone said:
And i Do have HTC Sync manager installed, so i guess HTC drivers are working properly.
Click to expand...
Click to collapse
Yes it should
So go to this thread and install adb/fastboot.
turn on usb debugging mode on your phone ''settings ---> developer option ---> check the usb debug box'' if developer option menu is messing from you settings menu do this: settings ---> about phone ---> tap the build number rapidly until you are prompted you unlocked developers option.
connect phone to pc via usb while phone is normally booted in Android (better to use port behind the pc instead of usb port in front. also i will recommend you not to use a windows 8.1 computer.
quote me when this step is done. (use reply below my post so i can see you replied)
alray said:
Np, just want to go step by step, that is why im asking you
Yes it should
So go to this thread and install adb/fastboot.
turn on usb debugging mode on your phone ''settings ---> developer option ---> check the usb debug box'' if developer option menu is messing from you settings menu do this: settings ---> about phone ---> tap the build number rapidly until you are prompted you unlocked developers option.
connect phone to pc via usb while phone is normally booted in Android (better to use port behind the pc instead of usb port in front. also i will recommend you not to use a windows 8.1 computer.
quote me when this step is done. (use reply below my post so i can see you replied)
Click to expand...
Click to collapse
Done and also i have windows 8.1 installed. Will there be any prob? Or can i continue?
shaktihtcone said:
Done and also i have windows 8.1 installed. Will there be any prob? Or can i continue?
Click to expand...
Click to collapse
You'll probably encounter problem later in the process with win 8.1. Win 8.1 require hboot 1.55 for fastboot to work. During the process you will need to downgrade hboot to 1.44 to flash the international RUU. And your phone will not be recognized by computer when using fastboot and you will be stuck there. So better to find a windows 7 computer or maybe you could dual boot win 7 on the same comp.
now you should be able to continue with next step even with win 8.1
so start Minimal ADB and Fastboot, a command prompt should open. with phone connected to pc and usb debugging enabled, check that drivers are working properly with this command:
Code:
adb devices
should output this:
Code:
List of devices attached
HT(yourserial#) device
alray said:
You'll probably encounter problem later in the process with win 8.1. Win 8.1 require hboot 1.55 for fastboot to work. During the process you will need to downgrade hboot to 1.44 to flash the international RUU. And your phone will not be recognized by computer when using fastboot and you will be stuck there. So better to find a windows 7 computer or maybe you could dual boot win 7 on the same comp.
now you should be able to continue with next step even with win 8.1
so start Minimal ADB and Fastboot, a command prompt should open. with phone connected to pc and usb debugging enabled, check that drivers are working properly with this command:
Code:
adb devices
should output this:
Code:
List of devices attached
HT(yourserial#) device
Click to expand...
Click to collapse
Hope this is what u were asking earlier.
shaktihtcone said:
Hope this is what u were asking earlier.
Click to expand...
Click to collapse
so now you have to
unlock your bootloader
install a custom recovery + root
gain s-off using rumrunner
note that unlocking bootloader may void your warranty as advised by htc on htcdev.com
alray said:
so now you have to
unlock your bootloader
install a custom recovery + root
gain s-off using rumrunner
Click to expand...
Click to collapse
So does this procedure requires rooting?
And if it does how can a rooted device receive updates from HTC?
And once the whole procedure is complete will my HTC One be still rooted?
And i could get a window 7 pc tomorrow , so will continue the remaining procedure tomorrow.
If u could pls give the detailed procedure, i would perform it tomorrow and will let u know .
Thank u so much for helping out.
shaktihtcone said:
So does this procedure requires rooting?
Click to expand...
Click to collapse
Yes you need root to s-off. You need s-off to change cid and downgrade hboot. you need to change cid and downgrade hboot to flash international ruu.
shaktihtcone said:
And if it does how can a rooted device receive updates from HTC?
Click to expand...
Click to collapse
When you will flash the international RUU.exe, your device will go back to 100% stock (stock recovery, stock OS, stock hboot) means no root anymore like if your device was brand new.
shaktihtcone said:
And once the whole procedure is complete will my HTC One be still rooted?
Click to expand...
Click to collapse
no the ruu.exe will remove root. You can always re-root if you need root after all that procedure and after downloaded the latest OTA
shaktihtcone said:
And i could get a window 7 pc tomorrow , so will continue the remaining procedure tomorrow.
If u could pls give the detailed procedure, i would perform it tomorrow and will let u know .
Click to expand...
Click to collapse
after you gained S-OFF:
Change your CID
Code:
fastboot oem writecid HTC__001
fastboot reboot-bootloader
note there is 2 lower cases H T C _ _ 0 0 1
confirm cid has changed
Code:
fastboot oem readcid
and then follow this guide to downgrade hboot, removed tempered flag from hboot, lock bootloader and flash the ruu.exe. Use this RUU.exe for international
shaktihtcone said:
Thank u so much for helping out.
Click to expand...
Click to collapse
Just hit the thanks button if I helped
edit: And don't go back to S-ON the ruu will not turn S-On, it can manually be done but stay S-OFF!
just a quick note, after "fastboot oem writecid HTC__001"
do a "fastboot reboot-bootloader" and continue with @alray
(sorry if i bugged in)
nkk71 said:
just a quick note, after "fastboot oem writecid HTC__001"
do a "fastboot reboot-bootloader" and continue with @alray
(sorry if i bugged in)
Click to expand...
Click to collapse
your help is always welcome
shaktihtcone said:
Thank u so much for helping out.
Click to expand...
Click to collapse
on @alray's behalf: you're welcome, and if you want to thank him because his posts are useful you can hit the THANKS button on his posts
shaktihtcone said:
So does this procedure requires rooting?
And if it does how can a rooted device receive updates from HTC?
And once the whole procedure is complete will my HTC One be still rooted?
And i could get a window 7 pc tomorrow , so will continue the remaining procedure tomorrow.
If u could pls give the detailed procedure, i would perform it tomorrow and will let u know .
Thank u so much for helping out.
Click to expand...
Click to collapse
for s-off which procedure should i follow as mine is uk vodafone model?
verizon one or international one? or any other?

[CLOSED] M7 not recognized in fastboot mode

Hello,
Currently I am running a converted GPE M7 and wanted to revert to stock ROM. But right after I changed my CiD from GOOGL001 to 11111111 the phone stopped getting recognized in fastboot mode (it gets recognized when booted normally). Can anyone help me solve this issue?
I have tried numerous guides on how to solve this, no luck. Tried reinstalling drivers, HTC sync drivers (removed sync), manually, nothing, phone shows a yellow exclamation mark in device manager. Using a USB2 port btw.
I am running win8.1 x64. Before it worked flawlessly. Now nothing... So can anyone help me with solving this and getting back stck ROM?
Phone is s-off, unlocked, rooted btw
Thanks all
1Scotty1 said:
Hello,
Currently I am running a converted GPE M7 and wanted to revert to stock ROM. But right after I changed my CiD from GOOGL001 to 11111111 the phone stopped getting recognized in fastboot mode (it gets recognized when booted normally). Can anyone help me solve this issue?
I have tried numerous guides on how to solve this, no luck. Tried reinstalling drivers, HTC sync drivers (removed sync), manually, nothing, phone shows a yellow exclamation mark in device manager. Using a USB2 port btw.
I am running win8.1 x64. Before it worked flawlessly. Now nothing... So can anyone help me with solving this and getting back stck ROM?
Phone is s-off, unlocked, rooted btw
Thanks all
Click to expand...
Click to collapse
what is the bootloader version?
alray said:
what is the bootloader version?
Click to expand...
Click to collapse
If you mean hboot, it is 1.44
1Scotty1 said:
If you mean hboot, it is 1.44
Click to expand...
Click to collapse
hboot 1.44 isn't compatible with windows 8.1 hence why fastboot doesn't work but everything else is fine (detected when booted but not detected when in bootloader)
Use win 7 or try this walkaround
alray said:
hboot 1.44 isn't compatible with windows 8.1 hence why fastboot doesn't work but everything else is fine (detected when booted but not detected when in bootloader)
Use win 7 or try this walkaround
Click to expand...
Click to collapse
I feel so stupid right now.... I thought I had 1.54... Will try it, thanks
alray said:
hboot 1.44 isn't compatible with windows 8.1 hence why fastboot doesn't work but everything else is fine (detected when booted but not detected when in bootloader)
Use win 7 or try this walkaround
Click to expand...
Click to collapse
I tried the workaround, didnt work and all PCs at home run WIN8.1... what do you suggest?
1Scotty1 said:
I tried the workaround, didnt work and all PCs at home run WIN8.1... what do you suggest?
Click to expand...
Click to collapse
You can use Ubuntu on your computer without installing it, go to ubuntu website, download the iso and burn it on a disc. Boot your computer from the disc, select "try ubuntu". Once booted in ubuntu install android tools and flash your ruu.zip.
alray said:
You can use Ubuntu on your computer without installing it, go to ubuntu website, download the iso and burn it on a disc. Boot your computer from the disc, select "try ubuntu". Once booted in ubuntu install android tools and flash your ruu.zip.
Click to expand...
Click to collapse
Ok, I will do the LiveUSB with Ubuntu a try it like that, many thanks
1Scotty1 said:
Ok, I will do the LiveUSB with Ubuntu a try it like that, many thanks
Click to expand...
Click to collapse
can you post the output of "fastboot getvar all" (remove imei and s/n)
what ruu are you planning to use?
alray said:
can you post the output of "fastboot getvar all" (remove imei and s/n)
what ruu are you planning to use?
Click to expand...
Click to collapse
will post the output, once I get Ubuntu upa dn running, as I cant get any fastboot commands to work now
I want to use the stock RUU, I want to return my phone to stock, but of course the RUU must be compatible with my CiD and MiD, I believe
1Scotty1 said:
will post the output, once I get Ubuntu upa dn running, as I cant get any fastboot commands to work now
I want to use the stock RUU, I want to return my phone to stock, but of course the RUU must be compatible with my CiD and MiD, I believe
Click to expand...
Click to collapse
and what was your stock CID / MID?
alray said:
and what was your stock CID / MID?
Click to expand...
Click to collapse
If I remember correctly, it was HTC__032 and PN0710000
@alray - I was trying it in ubuntu (14.04 version), but couldnt get very far... I couldnt install adb and fastboot
In the terminal I used these commands one by one:
sudo add-apt-repository ppa:nilarimogard/webupd8
sudo apt-get update
sudo apt-get install android-tools-adb android-tools-fastboot
And after the last one it said - unable to locate package android-tools-adb etc.
After that, I am lost...
EDIT: I also tried Ubuntu 12.04 but there was no option to "Try without installing"
@alray - Ignore my previous post, I FINALLY made it work. The problem with the 12.04 version was, that I downloaded the wrong one, I downloaded the "alternate" version, not the "desktop" version, now it is working flawlessly and ADB+Fastboot are running, phone is detected in fastboot, so today I will be flashing back to stock
Many Thanks for your help and guidance
1Scotty1 said:
@alray - Ignore my previous post, I FINALLY made it work. The problem with the 12.04 version was, that I downloaded the wrong one, I downloaded the "alternate" version, not the "desktop" version, now it is working flawlessly and ADB+Fastboot are running, phone is detected in fastboot, so today I will be flashing back to stock
Many Thanks for your help and guidance
Click to expand...
Click to collapse
Don't forget that since you are using Ubuntu, you will have to use an older ruu.zip because newer ruu (7.xx.xxx.x) will only flash using htc_fastboot.exe which is Windows only. No problem flashing older RUU using the standard fastboot from ubuntu e.g. 1.28.401.7 or 4.19.401.9
alray said:
Don't forget that since you are using Ubuntu, you will have to use an older ruu.zip because newer ruu (7.xx.xxx.x) will only flash using htc_fastboot.exe which is Windows only. No problem flashing older RUU using the standard fastboot from ubuntu e.g. 1.28.401.7 or 4.19.401.9
Click to expand...
Click to collapse
I have the 1.28.401.7 and I am going to do it right now, wish me luck
@alray - done, succesfully reverted to stock HTC Thanks again

Categories

Resources