maybe like a glass screen protector but for the camera, or even possibly a plastic one but it might not be as "transparent" when taking pictures.
anyone seen anything or am i going tohave to build my own?
johnzm said:
maybe like a glass screen protector but for the camera, or even possibly a plastic one but it might not be as "transparent" when taking pictures.
anyone seen anything or am i going tohave to build my own?
Click to expand...
Click to collapse
Don't bother. Pictures will look terrible. Just take care of your phone.
i just noticed another thread on the S4 forums someone said
"Stick a piece of clear scotch tape. "
seems interesting and easy to replace/recut. i might try that first and see how image quality compares
from the posts ive seen so far, it is only luck that prevents scratches on the "sapphire" lens. as you can see in the general chat, people who have cases, people who dont put anything else in their pocket, get the same scratches as people who dont seem to care. and this is a phone i want to use for more than a year?
some of these people are 3 months in and unable to use their camera.
Brava, if you dont use your camera thats fine, but if you do, i would suggest you look at your camera lens and watch it deteriorate without any protection
johnzm said:
from the posts ive seen so far, it is only luck that prevents scratches on the "sapphire" lens. as you can see in the general chat, people who have cases, people who dont put anything else in their pocket, get the same scratches as people who dont seem to care. and this is a phone i want to use for more than a year?
some of these people are 3 months in and unable to use their camera.
Brava, if you dont use your camera thats fine, but if you do, i would suggest you look at your camera lens and watch it deteriorate without any protection
Click to expand...
Click to collapse
camera just fine for all my previous phone no scratch nothing shiny as new, had note went to bench and everything not a single scratches, o yeh i take a lot of pictures about 5GB of photos that taken by my note
This phone has a sapphire lens, which is a very hard material, I don't think its needed.
SoCGHOST said:
This phone has a sapphire lens, which is a very hard material, I don't think its needed.
Click to expand...
Click to collapse
Ehh, that's what I thought. Think again http://forum.xda-developers.com/showthread.php?t=2475976
I think if you don't have a case it could be a problem.
It is a hard lens, but there will be minor, very light scratches on it, most likely it won't affect your pictures, but I was thinking this same thing tho, maybe a tiny piece of ghost armor over the camera.
Sent from my LG-D800 using Tapatalk
johnzm said:
from the posts ive seen so far, it is only luck that prevents scratches on the "sapphire" lens. as you can see in the general chat, people who have cases, people who dont put anything else in their pocket, get the same scratches as people who dont seem to care. and this is a phone i want to use for more than a year?
some of these people are 3 months in and unable to use their camera.
Brava, if you dont use your camera thats fine, but if you do, i would suggest you look at your camera lens and watch it deteriorate without any protection
Click to expand...
Click to collapse
People that are having this serious a problem should be contacting Lg about warranty work. Sapphire shouldn't scratch up that easy, that fast under normal use. I have watches that use sapphire and the only thing not scratched to hell is the sapphire.
Yeah... I might contact LG, but I've already had Verizon replace my phone (the original one in that thread) due to the scratches... New one began doing it as well, after the first time or two I wiped it off with the underside of my shirt. I ended up using a part of my left over zeiss pure crystal screen protector and custom cut out a small piece and put it on my camera lens... Works pretty good. Oh, it doesn't scratch nearly as easily as the lens did... I've had it on for a couple of weeks now and hardly any scratching. Check out the attached photo... May hinder photo quality some, but it's not much.
in_dmand said:
Yeah... I might contact LG, but I've already had Verizon replace my phone (the original one in that thread) due to the scratches... New one began doing it as well, after the first time or two I wiped it off with the underside of my shirt. I ended up using a part of my left over zeiss pure crystal screen protector and custom cut out a small piece and put it on my camera lens... Works pretty good. Oh, it doesn't scratch nearly as easily as the lens did... I've had it on for a couple of weeks now and hardly any scratching. Check out the attached photo... May hinder photo quality some, but it's not much.
Click to expand...
Click to collapse
It's my guess that majority of the scratches are caused by fingers, when there is a dust or debris on the lens, user mistakenly puts his/her finger on the lens trying to use the controls. I am also planning to use invisible tape on camera lens, when it is pressed against glass, it usually turns invisible, I think that might work. I can just remove and toss it when I need to use the camera, and when I am home I can just apply it again.
When I first saw LG G2 on it's release day in the store, I seriously thought those rear buttons were sliding camera cover, I thought to myself, what a great idea to protect the lens, then I realized they were buttons when I handled the phone and I could not find any buttons on the side (I initially thought there were touch sensitive sliding rocker/buttons on the side)
I took the old screen protector that was part of the packaging and cut a piece to cover the camera lens. :silly:
I haven't compared pictures, but I haven't noticed loss of quality or adverse effects for the auto-focus.
hydeah said:
When I first saw LG G2 on it's release day in the store, I seriously thought those rear buttons were sliding camera cover, I thought to myself, what a great idea to protect the lens, then I realized they were buttons when I handled the phone and I could not find any buttons on the side (I initially thought there were touch sensitive sliding rocker/buttons on the side)
Click to expand...
Click to collapse
My old Sony Ericsson had a sliding camera cover, that thing was awesome. You never have to worry about finger prints or scratching the camera.
Not to mention it also worked as a shortcut for the camera app like the volume down button on the G2.
yyz123 said:
I took the old screen protector that was part of the packaging and cut a piece to cover the camera lens. :silly:
I haven't compared pictures, but I haven't noticed loss of quality or adverse effects for the auto-focus.
My old Sony Ericsson had a sliding camera cover, that thing was awesome. You never have to worry about finger prints or scratching the camera.
Not to mention it also worked as a shortcut for the camera app like the volume down button on the G2.
Click to expand...
Click to collapse
Brilliant idea, sir. :good: I should have kept it clean when I took it off instead of just tossing it away. I still have two more screen protectors, and a set from an old phone, I think I am going to do that! Just cut it in the shape of the lens, odd shape but it should be OK. Maybe I can find 1:1 pdf of the back of the G2 and use that as template. Hey, maybe we should start selling them, I am sure people will buy a screen protector bundle that comes with a small piece for the camera over the ones that don't!
And I totally miss those old days when things were more functional. I can see some manufacturer (mostly Apple does this) recycle this idea and pass it as the "next great innovation"
hydeah said:
Brilliant idea, sir. :good: I should have kept it clean when I took it off instead of just tossing it away. I still have two more screen protectors, and a set from an old phone, I think I am going to do that! Just cut it in the shape of the lens, odd shape but it should be OK. Maybe I can find 1:1 pdf of the back of the G2 and use that as template. Hey, maybe we should start selling them, I am sure people will buy a screen protector bundle that comes with a small piece for the camera over the ones that don't!
And I totally miss those old days when things were more functional. I can see some manufacturer (mostly Apple does this) recycle this idea and pass it as the "next great innovation"
Click to expand...
Click to collapse
Haha, maybe. I don't know why more companies don't make protectors for the camera lenses on phones. It's probably even more important to protect them since they'll affect quality of pictures whereas a scratch (on a relative scratch proof gorilla glass) screen is more of an aesthetic annoyance.
I do miss the "mechanical feel" of the slider for my camera. It was fun just to play around and use the camera in that regards. I remember my criteria in selecting a cellphone was that it should be a flip phone. Might seem cheesy to some people nowadays but the feeling is much different maybe like how some people prefer physical keyboards on phones. Objects around us are becoming increasingly numb-feeling. I guess that's one of the reasons I really enjoy my mechanical watch. Might not have the accuracy of an atomic watch but it's pleasing to look at.
yyz123 said:
Haha, maybe. I don't know why more companies don't make protectors for the camera lenses on phones. It's probably even more important to protect them since they'll affect quality of pictures whereas a scratch (on a relative scratch proof gorilla glass) screen is more of an aesthetic annoyance.
I do miss the "mechanical feel" of the slider for my camera. It was fun just to play around and use the camera in that regards. I remember my criteria in selecting a cellphone was that it should be a flip phone. Might seem cheesy to some people nowadays but the feeling is much different maybe like how some people prefer physical keyboards on phones. Objects around us are becoming increasingly numb-feeling. I guess that's one of the reasons I really enjoy my mechanical watch. Might not have the accuracy of an atomic watch but it's pleasing to look at.
Click to expand...
Click to collapse
Rip the brand name and different colors/shades on pretty much all phones nowadays, most people can't tell one from another anymore, except Blackberry Q10. Not much originality anymore, I loved the idea of buttons on the back, and I went for it, now I find myself knocking on my wife's older LG phone, just like I found myself swiping up on all other phones when I used Z10 for 2 weeks. Originality is slowly dying not because it is a bad idea but because of all the people out there expecting things to be certain way, and to think that cellphones took this form just in last 5-6 years, I say we all got used to this way to quickly. Think about the criticism G2 received even before it was released "no way, buttons on the back, LG has lost its mind", then "Wow, I find it very easy to use and more ergonomic than trying to reach for the buttons on one sides"
hydeah said:
Rip the brand name and different colors/shades on pretty much all phones nowadays, most people can't tell one from another anymore, except Blackberry Q10. Not much originality anymore, I loved the idea of buttons on the back, and I went for it, now I find myself knocking on my wife's older LG phone, just like I found myself swiping up on all other phones when I used Z10 for 2 weeks. Originality is slowly dying not because it is a bad idea but because of all the people out there expecting things to be certain way, and to think that cellphones took this form just in last 5-6 years, I say we all got used to this way to quickly. Think about the criticism G2 received even before it was released "no way, buttons on the back, LG has lost its mind", then "Wow, I find it very easy to use and more ergonomic than trying to reach for the buttons on one sides"
Click to expand...
Click to collapse
Yea, it's crazy how phones (smart phones anyways) basically "standardized" over the past 5 years.
When I saw the rear buttons on the G2 before it was released, I knew it would be a great location. Bought the phone without even running by a demo and it was exactly as I expected.
The button placement works well even though many people thought otherwise.
I am confused are these scratches coming from shipment or just crap in peoples pocket
Related
I'd like to say Thank You to everyone in this forum and providing such a great site for us. I am very admire all yours talent that I wish I have, but I don't. I did I a little mod to my Tilt camera lens and it came out good and I'd like to share it with you all. This mod require no drilling to original lens and look oem.
1. A piece of Micro Slice Glass. 20 cents
(used for microscope, you can get it from science store)
http://www.flickr.com/photos/[email protected]/2914039158/
2. Knife sharpening stone, fine gain.
3. Glass cutting tool $6
http://www.flickr.com/photos/[email protected]/2914039484/
4. Qtip
5. Double side tape
Instruction:Sorry I don't know how to attach pictures into my post. Have to link it to Flickr. Hope you don't mind.
-To remove the lens, use a Qtip & push the lens out from the back side of the cover, use your figure nail to lift the lens out from the chrome frame.
http://www.flickr.com/photos/[email protected]/2913195413/in/photostream/
http://www.flickr.com/photos/[email protected]/2914041602/in/photostream/
-Use the lens to mark the size onto the Micro Slice Glass and cutting it with the glass cutting tools, you may need to try a few time to have a straight cut. http://www.flickr.com/photos/[email protected]/2914039158/
http://www.flickr.com/photos/[email protected]/2914039484/
-Now you have the piece cut out, here the fun part. use a sharpening stone and work near the sink cause you need to wet the stone during the sanding.
while sanding the new lens, use the original lens to check the shape. I made my a bit bigger then the original so it can be fit in tight without using any glue. Double side tape used just for insurance purposes.
http://www.flickr.com/photos/[email protected]/2914080332/
-Here the final product.
http://www.flickr.com/photos/[email protected]/2914250782/
-That's it folks, this is the best and the cheapest and the oem look camera lens mod ever. Here some shots I took before and after. Let me know what you think. Pictures are in order, original lens->Moded Lens->no cover.
1.http://www.flickr.com/photos/[email protected]/2914040902/
2.http://www.flickr.com/photos/[email protected]/2913194597/
3.http://www.flickr.com/photos/[email protected]/2914040044/
I will take some picture tomorrow for you to see. Time to sleep.
Those before and after pictures just show what a Mickey Mouse lens cover HTC has provided us with. How about a petition for a new back cover with a glass lens cover?
Top mod, gonna do this one.
BS...
Thanks for the heads up. Amazing how something so simple can improve the clarity of the camera so much.
What is a qtip?
Rob
rfarnell said:
Thanks for the heads up. Amazing how something so simple can improve the clarity of the camera so much.
What is a qtip?
Rob
Click to expand...
Click to collapse
The generic name would be a cotton swab.
Without cover is still better, and having done the mod many months ago, the dust problem is overblown.
Surur
Srart-up?
rfarnell said:
Thanks for the heads up. Amazing how something so simple can improve the clarity of the camera so much.
What is a qtip?
Rob
Click to expand...
Click to collapse
I don't know how many kaisers are out in the market but a manufacturer in the far-east (due to cost) can make such back cover with integrated fixed lens in the cost of ~$0.10 (go for worst case 1$) each and I'm sure most of us are willing to pay... lets say $15 each ? so here is a win-win opportunity waiting for an entrepreneur.
I did a similar yet cheaper fix.
Pop out the stock lens.
Cut some plastic (used the package some RAM for my pc came in)
Use the double sided tape and place it there. It's not that noticable but the picture quality improves a great amount.
Great mod, just took my back cover off and the picture is much better. I'm going to try just removing the cover altogether.
Lol, this is so much nicer than my ghetto fix! I had just popped out the plastic lens cover (and succeeded in breaking the little chrome-painted piece in the process, of course) and put a little piece of extra screen protector over the actual lens to protect it from the dust and what not.
Gotta' try this!
my lil camera lens cracked so i removed it and it has been off for over a month. i dont really have issues with debris getting under the battery cover. besides, its not hard to remove the back and clean it with my shirt and put it back on
nice, I will have to try this
You really can notice the difference. I just quickly take the back cover off, take a photo and then put it back on. I really notice the difference now. Thanks heaps!!!!
Thanks for the info... from now on, when I want to take a picture, I'll remove the back cover
I was thinking of doing this mod but using glass designed for optics instead of standard glass. A quick web search found http://www.astraproducts.com/i_ptsheet.asp. Are there any photography experts out there who know if this type of glass work any better than standard glass?
Also, if someone (possibly myself) were to bulk purchase pieces of optical glass "pre-machined" to fit as a replacement to the tilt, would there be much interest in purchasing these? I suppose it would all depend on cost and I have no idea what the cost would be, but maybe worth looking into.
This is just my opinion, but I see no point in going through the trouble of modding a phone that was never really meant to be used primarily as a camera.
I think this makes even less sense when you take in to account the fact that it performs really bad in certain conditions.
mata_mosca said:
This is just my opinion, but I see no point in going through the trouble of modding a phone that was never really meant to be used primarily as a camera.
I think this makes even less sense when you take in to account the fact that it performs really bad in certain conditions.
Click to expand...
Click to collapse
My reason for the mod is because the lense on my back cover is cracked right down the middle so the camera hardly works at all. Replacement covers run $50-$60 so I'm looking for a less expensive fix. I don't really want to remove the lense entirely because of allowing dust into the case and also the actual camera lense would be exposed and liable to scratch.
My camera lens has cracked. I know it can be peeled off, but I want to try to find a replacement. Does anyone know where I could order this part to put it back on myself? Ive done quite a bit of looking on google, and havent found anything solid.
Thanks!
OEM HTC Droid Incredible Camera $22.99
Only problem is it looks like you have to buy a minimum of 3.. cheap enough that you could probably sell the other 2 on Ebay or to someone on here who wants a spare..
If you look at the other cameras they sell, they are the photo units themselves, not the lens. I would say 22 bucks is more likely the price for the camera unit. Very nice find though!
Maybe you can call them and findout if they info on that.. odd that they wouldnt have the lens when they have almost everything else..
Global Direct Parts Tel: 1-210-444-9469 e-mail: [email protected]
A coworker of mine had his lens cover "push in" to the housing and VZW replaced it for him.
Well I don't have insurance, and the lens is cracked, not just pushed in.
He didn't have insurance either...
What do you have to lose by calling VZW and asking them? A wasted 5 minutes?
they even replaced my bricked phone for free with overnight shipping......
I got the red development cover off EBay. It came with a new back plate that has red buttons and a silver camera ring.
I'm not sure if I'm going to try replacing it or not... But would have an extra lens cover if I decide not to.
If it has the lens and all still in it I will gladly paypal ya for it.
Looks like that globaldirect place added a part.. this coujld be it if you are still looking for it.
http://www.globaldirectparts.com/HTC-Droid-Incredible-Camera-Bezel-p/htc738845.htm
That looks to be the part. I'm ordering 2 and will update with what they are exactly.
can you update with what that part is exactly? i'm thinking about trying to change mine out and would be nice to know exactly what i'm getting before ordering. i e-mailed them but haven't gotten a response yet...
mainly i'm interested in knowing does it come with the glass too, or is it just the bezel?
Anyone find a camera lens cover glass part yet?
Got the lenses in finally. Sorry it took so long, I was out of town on business for a bit. The glass lenses are included with the bezels, but there is no foam bumper like the stock lens. I keep my phone in the Speck case so that really isnt an issue. The lenses are protected by a plastic film which was nice. If anyone has any questions let me know. One concern i do have is glass seems to be off center on one of the bezels i received. I am going to contact them about that.
Any updates? Mine fell off but the camera still functions well. As much as I love the phone, I'm beginning to see just how cheap it is.
it seem like my DINC camera lens are coming offing too. if i pressed little bit harder, it will popped right inside.....
I have a loose lens, as well...
Love the Dinc...hopefully the dinc2 will be a little better quality...
If you have a tiny bit of skill you can make one out of any thin piece of clear plastic. Grab an old boombox or phone or something you don't use anymore with clear plastic and then grab your file and get to work. Free fix.
http://www.youtube.com/watch?v=Wkb5Qe_-0k0
Thought I'd share this video with you guys, this is mostly for those who want to keep their phones without any case so they may be able to take the proper precautions.
And for those who don't want to watch the whole video, skip towards 3/4 of the video and you will see the Nexus 5 screen break down after just one drop on it's screen, it was still functional but it was badly damage so this is more so you all may be careful and see what could happen if you phone falls just once on its screen at chest level.
hate too see this kind of test, obviusly if I drop the phone it will be somehow damaged, even if I drop my worst enemy head will be damaged.. just wasting of time and money
That was PAINFUL to watch, i cringed :crying: , wow i was very very surprised how bad it did, whole sections of the screen dettached themselves from the phone, I seriously thought gorilla glass was stronger
pretty brutal
prob grabbing a case just because of the camera protrusion however this helps reinforce that decision
stremax said:
hate too see this kind of test, obviusly if I drop the phone it will be somehow damaged, even if I drop my worst enemy head will be damaged.. just wasting of time and money
Click to expand...
Click to collapse
this guy gets sent free phones to do these tests
Good video, but I can't stand cases.
Takes a cool looking phone and makes them look like bricks out of the 1980s.
No thanks. Keep your phones cool, don't be scared.
Chad_Petree said:
That was PAINFUL to watch, i cringed :crying: , wow i was very very surprised how bad it did, pieces from the screen went even missing , i seriously thought gorilla glass was stronger
Click to expand...
Click to collapse
Gorilla Glass is just that - glass. It doesn't take side damage or flat landing good at all. The way Apple, Samsung & co are trying to protect the glass from drop damage is using an extra rim around the front panel, something that is missing from the Nexus 5, so no surprises that the screen cracked. What surprised me is the rigid plastic that shattered way too easy, it's something really cheap sorry to say.
The N5 is a lot more fragile than the N4. The phone isn't as rugged, though.
The N5 has no aluminum rim bezel as the N4. My N4 has fell from about the same height and only the bezel got dented. It is that rugged.
BoneXDA said:
Gorilla Glass is just that - glass. It doesn't take side damage or flat landing good at all. The way Apple, Samsung & co are trying to protect the glass from drop damage is using an extra rim around the front panel, something that is missing from the Nexus 5, so no surprises that the screen cracked. What surprised me is the rigid plastic that shattered way too easy, it's something really cheap sorry to say.
Click to expand...
Click to collapse
One of the advertising points for the N5, Moto X, and I believe G2 is the side-to-side glass. The extra rim isn't missing; it is intentionally left off. I love that combined with Pie controls.
But yes, the Gorilla Glass is just glass. I agree with your point here. It is supposed to be scratch resistant, not drop-proof diamond material. People always seem amazed by these videos when the glass breaks. Guys, it is glass, it breaks when you drop it. It doesn't matter if it's a phone, a computer, a TV, or even a watch. Glass breaks when it hits something hard at a decent speed. Nothing surprising there.
I never understood the purpose of these drops tests. Wouldn't you have to drop hundreds if not thousands to arrive at a conclusion? There are tons of people who post that their screen broke on a drop but someone would come on and say they dropped there's and only got a dent.
When they do crash ratings on cars, they do very specific tests at pre-determined angles of impact, etc...
These drop videos are some random dude that drops it and the phone lands at some random angle.
Remind me not to drop this thing! I miss the days when you could drop a phone and the worst thing that happened was the battery cover popping off...
Mr. Sprinkles said:
Remind me not to drop this thing! I miss the days when you could drop a phone and the worst thing that happened was the battery cover popping off...
Click to expand...
Click to collapse
Yeah, they were like Legos. You drop the phone, it shoots one way, the battery case shoots another way, the battery itself shoots a third way. Although that was unintentional, it is interesting that they make phone cases like that now. I can't recall off the top of my head, but I remember one that was designed to break into multiple parts when it was dropped in order to minimize the impact on the phone itself. Interesting idea. Never owned one, though.
Ordering case now
Sent from my Nexus 4 using Tapatalk
I'm usually very anti case, but the red one in the Play Store looks rad so I'll probably swoop on one of those
This post has been edited.
I can't wait til sapphire is the standard on phone screens. I would easily pay extra for a screen made with it.
I agree with you are all saying, sure is just glass and it is likely to break when dropped I mean we all know that is obvious but I decided to post this as a fair warning to every owner cause I have a Samsung S1 aka Captivate and have accidentally dropped it on the screen and not even a scratch, so yeah I know it depends on the build and materials so figured people should be more careful with their N5s.
Is the back cover removable? On the drop test it seems like it is.
I'm asking because I've to choose from a real bumper and a bumper with a protection on the back.
domenicop said:
Is the back cover removable? On the drop test it seems like it is.
I'm asking because I've to choose from a real bumper and a bumper with a protection on the back.
Click to expand...
Click to collapse
Easy to remove. Just drop your phone! But it probably could be removed, if you were so inclined. I can't imagine why you'd ever want to though. Because your warranty is likely toast if you do. And it may never go on correctly again. Just keep checking Youtube, a teardown video will be up soon enough they will see how hard it is to get off.
EDIT: Nevermind here is the video. Fairly easy to get off. But it is glued at the bottom so your results may vary.
http://www.youtube.com/watch?v=m-jDvZtpEJ8
I guess it's a good thing I don't drop my phones. :good:
Thats right folks, the out edge of this that lies around the screen is very, very brittle and thin. I have never dropped the phone and it has been in my spigen leather pouch for my old nexus since I bought it, no idea how it got dented, and its only very slight without scratches but it is definitely there.. just a forewarning.
vodka7 said:
Thats right folks, the out edge of this that lies around the screen is very, very brittle and thin. I have never dropped the phone and it has been in my spigen leather pouch for my old nexus since I bought it, no idea how it got dented, and its only very slight without scratches but it is definitely there.. just a forewarning.
Click to expand...
Click to collapse
Strange. The Cruzerlite (which are thin TPU cases, cheap in my opinion) drop test stood up to NUMEROUS drops & the device survived without any sign of damage. Not a scratch or dent.
Is you device white or black? My old Nexus 10 had a defect in the black soft touch coating that looked like a dent, but it was more likely an issue in the molding or application process.
vodka7 said:
Thats right folks, the out edge of this that lies around the screen is very, very brittle and thin. I have never dropped the phone and it has been in my spigen leather pouch for my old nexus since I bought it, no idea how it got dented, and its only very slight without scratches but it is definitely there.. just a forewarning.
Click to expand...
Click to collapse
Pics?
Sent from my Nexus 5 using xda app-developers app
Endoran said:
Pics?
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Mine is the white version, but the dent is on the top right above the camera, on the black portion, right where the side casing touches the glass. I would have a very hard time photographing this because of where it is on the phone/lighting etc.. ill try when I get home though.
vodka7 said:
Thats right folks, the out edge of this that lies around the screen is very, very brittle and thin. I have never dropped the phone and it has been in my spigen leather pouch for my old nexus since I bought it, no idea how it got dented, and its only very slight without scratches but it is definitely there.. just a forewarning.
Click to expand...
Click to collapse
a picture speaks a thousand words
I have about 5 or so nicks on the sides where the glass and plastic edge meet on my naked white N5. I agree that the plastic used is pretty brittle but it's not noticeable unless you really look for it.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Get a sufficient case otherwise you can't really complain...
I have one little mark or nick as well where the plastic case meets the glass on that tiny little lip. My 2 year old got a hold of my phone and dropped it on a metal external hard drive case the day I got it and it landed right on 90 degree edge of the case... I went temporarily insane. It is very small but kind of surprised me I guess. I dropped my galaxy S3 many times and never got more than the little hairline scratches you see in glossy plastic. That soft touch coating seems to have some give to it. It was my fault. My parents gave my kids a new ipad mini and I set my phone on top of it. I was in the other room and heard him say "new tablet". I knew at that moment the mistake I had made...
I have one of those really slim cases on the way which would have prevented it. I typically don't use cases and am usually not bothered by the small marks I get on my phones but because some of those ultra thin cases are so slim now days I am going to try one out. Marking up a brand new phone is a little different than one that's a year+ old...
I too, also have a slight dent under the screen bezel part of mine. I have never dropped mine. Noticed it while it was on the table; that the reflection of the curtain was slightly bent at the one area, instead of being completely straight. Looked closely, and sure enough, there was a dent. It's not noticeable during day-to-day use, but you CAN notice it if looking at the reflection it shows.
The chrome bezel on the nexus 4 was susceptible to dents as well.
A few weeks ago the Nexus 5 flew out of my hands and landed on our concrete driveway. I feared the worst, but only a small dent in the upper left corner of the back panel and some scratching is all that happened. Lucky me, but I still hate it. Never had a single blemish on the Nexus 4.
Sent from my Nexus 5 using Tapatalk
The sides of this phone are fine, besides the fact that they collect dust like crazy. The screen, however, is not. Another guy posting on Android Central also reported having a dent, similar to mine. I actually think this dent came with my device. I noticed it a couple of weeks ago, but disregarded it, as I thought it was the screen protector that came with the phone, but I decided to remove it and check again. It IS a part of the screen
Hobbesfed said:
The sides of this phone are fine, besides the fact that they collect dust like crazy. The screen, however, is not. Another guy posting on Android Central also reported having a dent, similar to mine. I actually think this dent came with my device. I noticed it a couple of weeks ago, but disregarded it, as I thought it was the screen protector that came with the phone, but I decided to remove it and check again. It IS a part of the screen
Click to expand...
Click to collapse
Normal. That's why most early glass screen protectors were not sticking properly.
bblzd said:
Normal. That's why most early glass screen protectors were not sticking properly.
Click to expand...
Click to collapse
Normal? How is a dent on the screen normal? My Nexus 10 does not have this, my old Samsung Vibrant does not have this. Why would a dent on a Nexus 5 be normal?
Hobbesfed said:
Normal? How is a dent on the screen normal? My Nexus 10 does not have this, my old Samsung Vibrant does not have this. Why would a dent on a Nexus 5 be normal?
Click to expand...
Click to collapse
I would say it's normal because of the following reasons:
1) it doesn't effect the usage of the device in any way
2) it's barely noticeable even in the "perfect" lighting conditions
3) many have reported the exact same thing in the early tempered glass threads; the only time it has ever come up or been noticed.
So why exactly is it a problem for you? Corners were cut to make this phone at a cheap price I would think that's pretty clear. It's also not the screen itself but around it.
Dented
In my N5 have no dent and any scratch..
I love with my N5
bblzd said:
I would say it's normal because of the following reasons:
1) it doesn't effect the usage of the device in any way
2) it's barely noticeable even the "perfect" lighting conditions
3) many have reported the exact same thing in the early tempered glass threads; the only time it has ever come up or been noticed.
So why exactly is it a problem for you? Corners were cut to make this phone at a cheap price I would think that's pretty clear.
Click to expand...
Click to collapse
There's a difference between "corners being cut" to make the device cheaper and really poor quality control. I understand them using a less camera module and a lower capacity battery, and a screen that washes out when tilted, etc, but the numerous issues with the hardware is ridiculous. Dents in screen, poor GPS connectivity, Wi-Fi problems, dust under screen, loose vibration motor, rattling buttons, and so on.
There is no reason for hardware bugs like this. To lower the price, lesser powerful hardware is used, but the low price is no excuse for poor quality. Like some users said, in terms of hardware, this device is like an alpha, and the only way to receive the "perfect" device is to continuously RMA.
We paid for the device, we should not be getting so many faults and issues.
Hobbesfed said:
There's a difference between "corners being cut" to make the device cheaper and really poor quality control. I understand them using a less camera module and a lower capacity battery, and a screen that washes out when tilted, etc, but the numerous issues with the hardware is ridiculous. Dents in screen, poor GPS connectivity, Wi-Fi problems, dust under screen, loose vibration motor, rattling buttons, and so on.
There is no reason for hardware bugs like this. To lower the price, lesser powerful hardware is used, but the low price is no excuse for poor quality. Like some users said, in terms of hardware, this device is like an alpha, and the only way to receive the "perfect" device is to continuously RMA.
We paid for the device, we should not be getting so many faults and issues.
Click to expand...
Click to collapse
How is it even a defect? It's not even noticeable. No one would consider it a hardware bug except apparently you. Please explain how this effects the usage of your device in any way.
Poor quality control is EXACTLY how corners are cut. Manufacturing anything has margin of errors and the less margin of error you're willing to release the more phones are "thrown away" and the more money a released device will cost. I'd explain more but I'm sure Wikipedia or a Google search can better explain the finer points of manufacturing and quality control then I can.
You read the specs of the phone and it has everything a $700 phone has but it costs $400. How did you think that was accomplished?
bblzd said:
.
You read the specs of the phone and it has everything a $700 phone has but it costs $400. How did you think that was accomplished?
Click to expand...
Click to collapse
There is a lot of discussion about that price... but Google routinely undercuts the competition when it comes to the nexus line (looking at you, 7)
Looking at the specs of the 5, then looking at comparable phones out ing the market, the only conclusion I can come to is that Google is letting these things go at either zero margin, or (my thought) at a fairly beefy loss.... kicking back cash to LG to cover their losses.
All you need to do is look at the other phones available at the same full retail price... does the 5 seem anywhere close to those? Nope, it blows them all out of the water... laughable in most cases. Now, you can cut corners to lower prices, but you can't cut THAT much.
LeoRex said:
There is a lot of discussion about that price... but Google routinely undercuts the competition when it comes to the nexus line (looking at you, 7)
Looking at the specs of the 5, then looking at comparable phones out ing the market, the only conclusion I can come to is that Google is letting these things go at either zero margin, or (my thought) at a fairly beefy loss.... kicking back cash to LG to cover their losses.
All you need to do is look at the other phones available at the same full retail price... does the 5 seem anywhere close to those? Nope, it blows them all out of the water... laughable in most cases. Now, you can cut corners to lower prices, but you can't cut THAT much.
Click to expand...
Click to collapse
The actual cost break down might never be known. One thing is for sure though, LG is not willing to take any loss and whatever Google may have paid them "extra" they will still try and build the phone as cheap as they possibly can.
LG does not consider the Nexus as their flagship phone and will never treat it as such. It's a phone they were contracted to build and they will cut every corner they can. It's just business.
I guess the subject says it all but just to be clear. I put my brand new Z3 Compact in my back pocket, too it out 2 minutes later and had a nice crack over the screen. The durability of the Z3 Compact screen is just a joke when it breaks this fast.
I carried my old HTC One S in my back pocket for the last 2.5 year and it just has some scratches (it also survived some nasty falls).
I've contacted Sony for support and I'm curious how they will respond...
marcfonteijn said:
I guess the subject says it all but just to be clear. I put my brand new Z3 Compact in my back pocket, too it out 2 minutes later and had a nice crack over the screen. The durability of the Z3 Compact screen is just a joke when it breaks this fast.
I carried my old HTC One S in my back pocket for the last 2.5 year and it just has some scratches (it also survived some nasty falls).
I've contacted Sony for support and I'm curious how they will respond...
Click to expand...
Click to collapse
You must have buttocks made of steel.
I'm pretty sure it didn't just sponaneously crack in your back pocket, you must have sat down or something while it was in there.
By the way, keeping your phone in your back pocket is like asking for it to be stolen by pickpockets.
The biggest joke here must the be that you're angry and surprised that a phone breaks when carrying it in you're back pocket.
Skickat från min LG-V500 via Tapatalk
degraaff said:
You must have buttocks made of steel.
I'm pretty sure it didn't just sponaneously crack in your back pocket, you must have sat down or something while it was in there.
By the way, keeping your phone in your back pocket is like asking for it to be stolen by pickpockets.
Click to expand...
Click to collapse
^This...
tribemac said:
The biggest joke here must the be that you're angry and surprised that a phone breaks when carrying it in you're back pocket.
Skickat från min LG-V500 via Tapatalk
Click to expand...
Click to collapse
...and this^^^
I get the impression that the black version seems to be more sensitive.... Fingers crossed 'cause I got the white one
I suppose you didn't use a case or protection of any kind?
I hope Sony say 'Tough titties don't sit on your phone moron!'
Seriously what do people expect...
Looks like some scratches on the right side as well as a chip. Your leaving a lot out it wasn't just a "stuck it in my back pocket and it broke".
Even tho phones never used to break in back pockets, suddenly iPhone 6 and now z3c owners are saying, what do you expect.
I'd expect a phone to not be weaker than the old ones actually.
Hope you get it sorted op.
i'm sure they broke too. but no one took the time to post about it until now because they knew that it was their fault for breaking it. now all of a sudden, they are like, hey i should tell everyone about this because it makes me cool.
I carry my Z3C naked, not a single scratch yet.
qbert456 said:
Even tho phones never used to break in back pockets, suddenly iPhone 6 and now z3c owners are saying, what do you expect.
I'd expect a phone to not be weaker than the old ones actually.
Hope you get it sorted op.
Click to expand...
Click to collapse
Phones are steadily getting larger & thinner, you don't need to be a rocket scientist to figure out that sitting on your phone isn't going to do it a world of good.
In other news: camera in phones aren't as good as dedicated cameras.. (thought I'd better mention that too, as that's something else many people have difficulty grasping)
you're right, planes have got larger, thinner (skinned) and lighter too .
Best not fly anymore then as by your rationale we should expect breakage and not expect improvements as technology advances.
qbert456 said:
you're right, planes have got larger, thinner (skinned) and lighter too .
Best not fly anymore then as by your rationale we should expect breakage and not expect improvements as technology advances.
Click to expand...
Click to collapse
People too seem to have got larger and more thin skinned...
I'm not sure how to spell this out.
The laws of physics dictate, larger thinner objects are more likely to break/bend when pressure/weight is applied than smaller fatter ones.
Nothing to do with technology, people need to stop being sheep and apply a little common sense, before doing stupid things then 'blaming the technology' - take some responsibility for yourself ffs.
My Z3C was in front pocket (not very tight pants) and front screen was cracked with no reason.
dl.dropboxusercontent.com/u/2926416/IMG_0445.JPG
dl.dropboxusercontent.com/u/2926416/IMG_0434.JPG
marcfonteijn said:
I guess the subject says it all but just to be clear. I put my brand new Z3 Compact in my back pocket, too it out 2 minutes later and had a nice crack over the screen. The durability of the Z3 Compact screen is just a joke when it breaks this fast.
I carried my old HTC One S in my back pocket for the last 2.5 year and it just has some scratches (it also survived some nasty falls).
I've contacted Sony for support and I'm curious how they will respond...
Click to expand...
Click to collapse
that is basically identical the crack that i had except mine was on the back. Mine is back with Sony at the moment! mine was in my front pocket though.
Just because manufactures make the phone thinner and lighter does not mean the way people use them are any different. people still put them in pockets etc. I have kept my nexus 5 in my back pocket for ages, sat down on it etc and its not cracked. (im 6ft4 and about 17st) i get my sony and breaks in 5 days...when its in the front pocket. There are making things lighter and thinner sure but not to the point where i have to make sure i carry a phone in bubble wrap because they cant make it strong enough for everyday use. Something is wrong with the phones not with the way are they being carried!
tribemac said:
The biggest joke here must the be that you're angry and surprised that a phone breaks when carrying it in you're back pocket.
Skickat från min LG-V500 via Tapatalk
Click to expand...
Click to collapse
Quoted for truth
You really should get a phone with more durable material if you plan to pocket it. It's just common sense it is fragile..... Belt clip for me!
Glass on Back Of Xperia Z3 C may be inferior.
Inferior meaning not the Asahi Dragontrail or Gorilla Glass 3
Equivalent we HOPE is on the front.
Does Sony specify exactly what is on the front of these phones ?
And I think the specs on the back glass are more vague.
Seems like design flaw / substitution glass or maybe illogical
design flaw.
One of main reasons I want a phone this
size is to put in front pocket and carry ..
Use to play Internet Radio while I work and
browse play on when not working.
In a good case is this phone rugged enough for physically active
People ? Or too fragile .
robertkoa said:
Inferior meaning not the Asahi Dragontrail or Gorilla Glass 3
Equivalent we HOPE is on the front.
Does Sony specify exactly what is on the front of these phones ?
Seems like design flaw / substitution glass or maybe illogical
design flaw.
One of main reasons I want a phone this
size is to put in front pocket and carry ..
Use to play Internet Radio while I work and
browse play on when not working.
In a good case is this phone rugged enough for physically active
People ? Or too fragile .
Click to expand...
Click to collapse
The front glass seems good, no micro scratches so far. I'm just going to get me a Spigen Ultra Hybrid clear bumper case as soon as it comes out for the Z3C, then it'll be fine.
Right now I have this as a temporary case: http://www.mobilefun.co.uk/flexishield-sony-xperia-z3-compact-gel-case-frost-white-p49135.htm
Some people seem to think scratch resistant = shatterproof. Actually the most scratch resistant materials like diamond etc are not hard to shatter/break at all. It has nothing to do with one another.
I was going to buy the Z3c and apply a shatter resistant film on the front and back, but that only protects from knocks to the panel from resonating and breaking the glass, not from pressure from lifting your leg with the phone in your front pocket.
If anyone has a go-to brand of protective film they use to prevent breaking (not so much scratching, as I can replace the film every now and again), I want to know!