Related
Hello, I can download the hard spl just fine, but when I go to extract it windows won't let me. I have windows xp sp3. Ive goolged the problem but I can not find a solution that works, So please, pretty please, can some one help me with this problem?
what kind of an error message are you getting when you say "windows doesnt let you"? are you able to extract other zip files normally? perhaps your download was corrupted and u need to redl the file
The error says " This file is potentially unsafe file type.exe" and then it proceeds to tell me that I shouldn't open the file if its receved from email attachement or an untrusted source. And then it asks if I want to open it any way. So I click yes and i get this message " Winzip was unable to extract (file name here). exe, terminating operation.
The download is good. From what I have read online when googled is that windows thinks its a virus and won't let me extract the file. I've tried some work arounds like emailing it to myself but that doesn't work. It won't even let me open the attachment because it's being flaged as a virus.
I'm wondering if some one can send me the file the unziped. You know, unpacked. That should work from there im hopeing. but anywho, I'm at a loss as is what to do about this. I'm just dieing to try this new rom out but I can't flash my bloody fone. Got any ideas?
Edit.... Yes I can extract and unzip other files normally, sorry forgot to mention that.
Is there any reason not to temporarily dissable your AV software, extract the stuff you need and then reenable it?
this is a known issue where anti viruses report the hardspl as a falsely positive nothing to worry about.. read the flashing guide im sure its somewhere in there. disable ur antivirus and continue, reread the guide; ensure ur battery is charged at least 50% or more. dont forget to reenable ur antivrius later
Please post in the existing thread.
P.S. the answer is already there.
Thanks
Dave
Okay, I'll keep it short and simple.
1. Got the phone and activated it. Running froyo
2. Rooted and installed CWM with the .bat one click file (I think it's the program MT wrote. It wasn't revotoolkit which I know is thecubed).
3. Realized I want to use gingervolt, so I need to update. I use the .bat file to un-root and go back to stock.
4. Try to manually push the OTA download through settings>about phone. Updates the phone to VS910ZV6 which is froyo 2.2.2
5. Try to update again (need gingerbread, which is VS910ZV7) and it keeps telling me "No new Software Update Available"
What gives? I'm thinking it may have something to do with the root? I also tried doing the manual update, you know the one floating around the internet using a .tot and LGNSP or whatever the acronym is, but Megaupload and Multiupload don't have the files anymore. Right now I'm downloading TheCubed's stock shipping rom and see if I can install it and get the update to go through.
Is there any fix that someone might know of? I ask because I've read several topics where people say they went down to stock shipping rom but they still couldn't update to gingerbread...then the topics just stop. Obviously they found their answer, so I'm hoping someone will share. I NEED TEH GINGERBREAD.
Thanks for all the help!
I had the same problem,
I was able to directly push GB using this method
http://forum.xda-developers.com/showthread.php?t=1337386
use the VS910ZV7.tot, that's the latest stock.
I found that post and I would LOVE to do it, but all the files are gone. Click a link, all of them say "file is no longer available".
file serve .tot links gone
Juggernuts said:
I found that post and I would LOVE to do it, but all the files are gone. Click a link, all of them say "file is no longer available".
Click to expand...
Click to collapse
I have the same problem all the .tot files on file serve are no longer there please please give a different link or if you already have the file can you email it to me at [email protected] thank you in advance.
Ok here's what I've done so far---
Followed the instructions to set it back to the stock rom-
http://forum.xda-developers.com/showthread.php?t=1129117
Now My build version is VS910ZV4 and my software version is VS910ZV6
O_O
Can it change the build version without changing the software?????
Tried to update, no avail. Nothing happens, I just get the "no software available" crap. Shouldn't it atleast try to update the build version? and is there a reason why it changed my build version to V4 but not my software?
Read the last few pages of the thread. I posted a link for the V7 Gingerbread .tot file that is linked to my dropbox account. I also posted a link somewhere around here for the LGPNST. I'll try to find the links.
V7 Gingerbread .tot file:
http://db.tt/EA5OuXTu
LGPNST:
http://dl.dropbox.com/u/54918541/LGPNST (LG Revolution).zip
Downloading the .tot now. Crossing my fingers that someone finds the LGNSP file!
Juggernuts said:
Downloading the .tot now. Crossing my fingers that someone finds the LGNSP file!
Click to expand...
Click to collapse
I posted the link just below the .tot file link.
Sent from my Dread Ginger Revo using Tapatalk.
spc_hicks09 said:
I posted the link just below the .tot file link.
Sent from my Dread Ginger Revo using Tapatalk.
Click to expand...
Click to collapse
Oh hell...Did you edit that or am I just an idiot? O_O Either way thanks!!!
I'll let everyone know how it goes.
1. Get the LGNPST Package with the GenericModels and Components Plug-In.
http://www.multiupload.com/UT7I7O2MNZ
2. Get the driver for the phone and install it
http://www.multiupload.com/QELZ4SJ5U4
3. Get the Stock Rom TOT file and extract it.
POSTED ABOVE
4. Get the DLL file specifically for the Revolution
http://www.multiupload.com/0AJEFUHVID
5. Extract the "LGNPST Store & Lab"
I have everything but number 4. What do I do about the DLL, is this something I need?
Juggernuts said:
1. Get the LGNPST Package with the GenericModels and Components Plug-In.
http://www.multiupload.com/UT7I7O2MNZ
2. Get the driver for the phone and install it
http://www.multiupload.com/QELZ4SJ5U4
3. Get the Stock Rom TOT file and extract it.
POSTED ABOVE
4. Get the DLL file specifically for the Revolution
http://www.multiupload.com/0AJEFUHVID
5. Extract the "LGNPST Store & Lab"
I have everything but number 4. What do I do about the DLL, is this something I need?
Click to expand...
Click to collapse
Yeah that DLL is a must have. I have it at home and would be able to upload it but not for a couple hours cuz I'm at work. You can try Google but I can't promise that you'll find it.
Sent from my Dread Ginger Revo using Tapatalk.
Thanks so much you've been a lifesaver...If you upload that, I'll do anything. I'd even help start dev'ing again
Thanks!!
EDIT: I found this, will it work, or is that only for v4?
http://forum.xda-developers.com/showpost.php?p=14850289&postcount=19
May have to upload it anyways...When I try to open it with 7zip I get "main package name is missing" -_-
Juggernuts said:
May have to upload it anyways...When I try to open it with 7zip I get "main package name is missing" -_-
Click to expand...
Click to collapse
Not a problem, expect it uploaded in about 1 hour.
that dropbox link for the .tot file isnt working it keeps sending firefox into foce close any ideas the other one works fine the lgnps file
luke614567 said:
that dropbox link for the .tot file isnt working it keeps sending firefox into foce close any ideas the other one works fine the lgnps file
Click to expand...
Click to collapse
It may just be an issue with Firefox. Juggernuts was able to download it without issue.
spc_hicks09 said:
It may just be an issue with Firefox. Juggernuts was able to download it without issue.
Click to expand...
Click to collapse
ok so i got started with internet explorer quick question how big is the .tot file??? and then is the dll specific or is it universal with v7?
Three things:
1. I was able to open up that .dll with 7zip. if you right click and try to open with 7zip it wont work. Open 7zip and navigate to the zip, then extract it.
2. You'll have to download the .tot (and possibly the .dll) under IE. The .tot file is 637 megs.
3. The .DLL seems to be universal. Once you open it with 7zip it's the exact same size of the link he gave. I'm 53% into the upgrade so I'll let you know if everything went ok.
EDIT: added a third
Everything worked. Installing Gingervolt 1.3!!!!
luke614567 said:
ok so i got started with internet explorer quick question how big is the .tot file??? and then is the dll specific or is it universal with v7?
Click to expand...
Click to collapse
VS910.DLL:
http://dl.dropbox.com/u/54918541/VS910.dll
Zip & Xap coruption in windows 8
I can zip. I can rename to xap and I can send to my phone and it works but when I try and extract I get error this is causeing a lot of headache and is happening on more than one zip file I have tried both versions of 7zip and WinRAR with no avail. searched the internet for days on end I cant figure out why this is happening.
OK, basic bug reporting steps here:
1: summarize the problem. All I got is that it has something to do with zips, xaps, WP8, and Win8.
2: explain what you're trying to do, what the expected result is and what actually happens (the screenshot helps with, but does not replace, this step).
3: give the steps to reproduce the problem. Do it as actual steps, not a run-on sentence with no details. For example, how are you sending the file to your phone?
GoodDayToDie said:
OK, basic bug reporting steps here:
1: summarize the problem. All I got is that it has something to do with zips, xaps, WP8, and Win8.
2: explain what you're trying to do, what the expected result is and what actually happens (the screenshot helps with, but does not replace, this step).
3: give the steps to reproduce the problem. Do it as actual steps, not a run-on sentence with no details. For example, how are you sending the file to your phone?
Click to expand...
Click to collapse
Okay this really has nothing to do with my phone. other than the fact that zip's can be turned in to xap files.
lets say I have a folder with some pictures in it I right click on it and hit add to archive ok now folder is zipped.
then I try to unpack it but I cant because its corrupted.. I can not extract the file or a pic I get this error.
I Have found only one other person having this error on 7-zip forum and he says in only one post he fixed an error he was having with his zip by turning off IDM. I honestly don't see how that's related.
I have lost files due to this error.
If you copy the file off the PC, can you open the archive on another machine?
jackrabbit72380 said:
Okay this really has nothing to do with my phone. other than the fact that zip's can be turned in to xap files.
lets say I have a folder with some pictures in it I right click on it and hit add to archive ok now folder is zipped.
then I try to unpack it but I cant because its corrupted.. I can not extract the file or a pic I get this error.
I Have found only one other person having this error on 7-zip forum and he says in only one post he fixed an error he was having with his zip by turning off IDM. I honestly don't see how that's related.
I have lost files due to this error.
Click to expand...
Click to collapse
OK so.
I take a folder, 7zip it to .zip
renamed .zip to .xap
Extracted file just fine, windows 8 x64 pro.
Soooooooooooooooooooo...update your 7zip?
Not even sure why you're asking this in a phone forum, but did it work to extract the files on another machine? The fact that sending XAPs to the phone wors suggests that the problem is with the decompressor on your PC, not the compressor.
Hi All,
I'm relatively new to Android (had the Nexus 7 for about a year). My questions is this:
I have 4.2.2 currently loaded. When I orinally got the nexus 7, I used a toolkit to unlock the bootloader and root the device, so I could install SixAxis and a few other apps that required root.
What is the easiest way for me to now update to 4.3? Will the OTA update that is bound to show up on the device shortly work?
BTW This is the WiFi only Nexus 7, 16 GB and my main PC at home is a Mac.
Thanks.
Foxman2k said:
Hi All,
I'm relatively new to Android (had the Nexus 7 for about a year). My questions is this:
I have 4.2.2 currently loaded. When I orinally got the nexus 7, I used a toolkit to unlock the bootloader and root the device, so I could install SixAxis and a few other apps that required root.
What is the easiest way for me to now update to 4.3? Will the OTA update that is bound to show up on the device shortly work?
BTW This is the WiFi only Nexus 7, 16 GB and my main PC at home is a Mac.
Thanks.
Click to expand...
Click to collapse
Get it locked and unrooted to get OTA possiblt easiest way.
Otherwise flash the factory images:thumbup:
Sent using Nexus 7
basuraunak said:
Get it locked and unrooted to get OTA possiblt easiest way.
Otherwise flash the factory images:thumbup:
Sent using Nexus 7
Click to expand...
Click to collapse
Do you have a link of a guide that I could follow on how to flash the factory image?
Can I download the zip and then use the clockwork recovery i have installed to load the zip?
I don't think that having the bootloader locked or unlocked will really affect the OTA..
Am I right or am I right?
Foxman2k said:
Do you have a link of a guide that I could follow on how to flash the factory image?
Can I download the zip and then use the clockwork recovery i have installed to load the zip?
Click to expand...
Click to collapse
Just use wug's toolkit. Its over in the android development in the n7 section...
---------- Post added at 10:04 AM ---------- Previous post was at 10:00 AM ----------
drake90001 said:
I don't think that having the bootloader locked or unlocked will really affect the OTA..
Am I right or am I right?
Click to expand...
Click to collapse
I dont think having it unlocked will effect the ota (it hasnt in the past for me), but it sounded like he wanted to flash the factory image. I actually have a nandroid of it on my unlocked n7. Gonna flash the official and see if I can get the ota later...
I've taken OTAs no problem on an unlocked, rooted device with TWRP recovery. So you're fine.
Sent from my Nexus 7 using Tapatalk 4 Beta
Here you go for flashable zip :
http://forum.xda-developers.com/showthread.php?t=2376522
Sent from my Nexus 7 using xda premium
So I downloaded what I believe to be the right file, ab67ca07c4b2e03eca795ada10ff041b77fbb7bf.signed-nakasi-JWR66V-from-JDQ39.ab67ca07 (1).zip.
I then reboot my nexus 7 into clockworkmod revovery and select install zip, choose zip from sdcard, browse to the aboev file but then get an error:
It ends in (Status 7) Installation aborted.
What am I missing?
Also, just tried via adb sideload and that didn't work either.
Foxman2k said:
So I downloaded what I believe to be the right file, ab67ca07c4b2e03eca795ada10ff041b77fbb7bf.signed-nakasi-JWR66V-from-JDQ39.ab67ca07 (1).zip.
I then reboot my nexus 7 into clockworkmod revovery and select install zip, choose zip from sdcard, browse to the aboev file but then get an error:
It ends in (Status 7) Installation aborted.
What am I missing?
Click to expand...
Click to collapse
Did you install the aosp browser and rename the default browser apk and odex files or modify the buildprop file? Those must be as original to take the update. Also, you should have gotten a message about what failed when you get the Status 7 error. What else did it say?
Groid said:
Did you install the aosp browser and rename the default browser apk and odex files or modify the buildprop file? Those must be as original to take the update. Also, you should have gotten a message about what failed when you get the Status 7 error. What else did it say?
Click to expand...
Click to collapse
No to all of the above. I don't know what odex files or buildprop file would refer to, so I defintely haven't modified them.
It says:
Warning: No file_contextsVerifying current system...
assert failed: apply_patch_check("/system/bin/debuggerd", "a whole bunch of letters and numbers", "a whole bunch of letters and numbers")
E:Error in /sdcard/0/update rom/ab67ca07c4b2e03eca795ada10ff041b77fbb7bf.signed-nakasi - JWR66V - from - JDFQ39.ab67ca07 (1).zip
(Status 7)
Installation aborted.
Groid said:
Did you install the aosp browser and rename the default browser apk and odex files or modify the buildprop file? Those must be as original to take the update. Also, you should have gotten a message about what failed when you get the Status 7 error. What else did it say?
Click to expand...
Click to collapse
Foxman2k said:
No to all of the above. I don't know what odex files or buildprop file would refer to, so I defintely haven't modified them.
It says:
Warning: No file_contextsVerifying current system...
assert failed: apply_patch_check("/system/bin/debuggerd", "a whole bunch of letters and numbers", "a whole bunch of letters and numbers")
E:Error in /sdcard/0/update rom/ab67ca07c4b2e03eca795ada10ff041b77fbb7bf.signed-nakasi - JWR66V - from - JDFQ39.ab67ca07 (1).zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Does it make a difference that my current build number in "about tablet" shows as JDQ39 and not JDFQ39 as above?
The problem file is 'debuggerd' in the /system/bin folder as it says in the error message. I had the same issue previously on the last N7 update. I had to get the original file from someone since the file had been replaced by another app (possibly Stickmount) or it can be extracted from the previous update to 4.2.2. I don't know about the JDFQ39 compared to the download file showing JDQ39, but that is the same file I downloaded. The (1).zip means you had previously downloaded the file and this is an additional d/l. That shouldn't be a problem, but you can delete the (1) if you want.
I'll try flashing through CWM and let you know if mine worked. If so, I can send you the right 'debuggerd' file.
Groid said:
The problem file is 'debuggerd' in the /system/bin folder as it says in the error message. I had the same issue previously on the last N7 update. I had to get the original file from someone since the file had been replaced by another app (possibly Stickmount) or it can be extracted from the previous update to 4.2.2. I don't know about the JDFQ39 compared to the download file showing JDQ39, but that is the same file I downloaded. The (1).zip means you had previously downloaded the file and this is an additional d/l. That shouldn't be a problem, but you can delete the (1) if you want.
I'll try flashing through CWM and let you know if mine worked. If so, I can send you the right 'debuggerd' file.
Click to expand...
Click to collapse
Ok great. I do have stickmount installed...
Well, I got the debuggerd error also. I'll try the backup debuggered file I used in the last update. Otherwise, I'll have to find the debuggerd file from 4.2.2. Any help out there?
Groid said:
Well, I got the debuggerd error also. I'll try the backup debuggered file I used in the last update. Otherwise, I'll have to find the debuggerd file from 4.2.2. Any help out there?
Click to expand...
Click to collapse
Glad I'm not alone lol
Still no joy. I think someone will have to get the right debuggerd file and get it to one us on a pm or email. Also, I noticed on my update try that the file was listed as JDQ39. ... and not the JDFQ39. ... that you saw.
Groid said:
Still no joy. I think someone will have to get the right debuggerd file and get it to one us on a pm or email. Also, I noticed on my update try that the file was listed as JDQ39. ... and not the JDFQ39. ... that you saw.
Click to expand...
Click to collapse
once we get the file, how do I replace the file with the debuggerd that is currently on the nexus?
What I will do is to copy the debuggerd file to the N7 internal storage root folder from my pc. Then I will rename /system/bin/debuggerd to debuggerd.bak (or whatever extension you want to add). Then I will copy the correct debuggerd file from sdcard to /system/bin and try the update again. I started a new thread asking for someone with an unaltered 4.2.2 debuggerd file to send it to me. If I get it I'll pass it along to you.
Groid said:
What I will do is to copy the debuggerd file to the N7 internal storage root folder from my pc. Then I will rename /system/bin/debuggerd to debuggerd.bak (or whatever extension you want to add). Then I will copy the correct debuggerd file from sdcard to /system/bin and try the update again. I started a new thread asking for someone with an unaltered 4.2.2 debuggerd file to send it to me. If I get it I'll pass it along to you.
Click to expand...
Click to collapse
Are you using a tool like ES File Manager to do the moving and renaming of files etc?
Hi I tried to install a new Rom Ive had experience before in doing this so thought it would be like the countless other times ive done on Samsung.
Ive unlocked
Ive installed a recovery (did have TWRP but now using PitchBlack)
It says I dont have any download or storage in recovery
stuck in fastboot
When using MiFlash (which Ive no experience of)error message, see attached image.
Any help in next steps be much appreciated.
In the folder where rom is, create an empty folder and rename it to log.
Then try reflashing. It should work
Cheers
i dont have the rom on my phone anymore and miflash is giving that error
abhi24365 said:
In the folder where rom is, create an empty folder and rename it to log.
Then try reflashing. It should work
Cheers
Click to expand...
Click to collapse
any other ideas bud?
needs to do testpoint and flash china rom using miflash tool+authorized account
---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------
for the screenshot means your windows doesnt support the miflash tool
you need to switch to other windows 7 pc
I got the log folder done now giving this error:
checasey said:
I got the log folder done now giving this error:
Click to expand...
Click to collapse
That's not an error, it means it's done installing your drivers
oh really?!! what do I do now then?
cheers for the help
trying to install stock rom using miflash, it says cannot find file flash_all_lock.bat anyone help?
Hi, it happened yesterday, I did the following:
1- download my flash last
2-decompress my flash and create empty folder with the name of log inside what was decompressed
3-download compatible firmware in .tgz format not in .zip
4- unzip .tgz file on disk C, rename the folder to raphaeli (I don't know if necessary, I don't think so I did).
5- open miflash, install drivers.
6-find the raphaeli folder and click on refresh.
7- uncheck the box below where it says block if this is not the case.
I hope you understand me, sorry for the English use a translator
hallowinx said:
Hi, it happened yesterday, I did the following:
1- download my flash last
2-decompress my flash and create empty folder with the name of log inside what was decompressed
3-download compatible firmware in .tgz format not in .zip
4- unzip .tgz file on disk C, rename the folder to raphaeli (I don't know if necessary, I don't think so I did).
5- open miflash, install drivers.
6-find the raphaeli folder and click on refresh.
7- uncheck the box below where it says block if this is not the case.
I hope you understand me, sorry for the English use a translator
Click to expand...
Click to collapse
Ill give this a whirl thank you
hallowinx said:
Hi, it happened yesterday, I did the following:
1- download my flash last
2-decompress my flash and create empty folder with the name of log inside what was decompressed
3-download compatible firmware in .tgz format not in .zip
4- unzip .tgz file on disk C, rename the folder to raphaeli (I don't know if necessary, I don't think so I did).
5- open miflash, install drivers.
6-find the raphaeli folder and click on refresh.
7- uncheck the box below where it says block if this is not the case.
I hope you understand me, sorry for the English use a translator
Click to expand...
Click to collapse
how do you download in .tgz format?
checasey said:
how do you download in .tgz format?
Click to expand...
Click to collapse
or sorry how do you unzip a .tgz file it does not give that option?
checasey said:
or sorry how do you unzip a .tgz file it does not give that option?
Click to expand...
Click to collapse
You don't unzip the .tgz file. You flash the .tgz file using MiFlash. Before you flash the file make sure the "clean all and lock" on the bottom right corner IS NOT SELECTED. If you flash it with it selected it will lock your bootloader and you will most likely brick your phone.
I just got the .tgz file but now getting this error, anyone able to help? please im begging at this stage!!!
checasey said:
I just got the .tgz file but now getting this error, anyone able to help? please im begging at this stage!!!
Click to expand...
Click to collapse
Try extracting the tgz file into C: drive. If you see an image folder flash that folder
Bubble Tea said:
Try extracting the tgz file into C: drive. If you see an image folder flash that folder
Click to expand...
Click to collapse
Getting this error. Everything is done exactly as it should be not sure whats the problem
Can you show pictures of what's inside of the folder you're trying to flash.
Bubble Tea said:
Can you show pictures of what's inside of the folder you're trying to flash.
Click to expand...
Click to collapse
yeah sure, i attached the folder. i really appreciate the help
checasey said:
yeah sure, i attached the folder. i really appreciate the help
Click to expand...
Click to collapse
EDITED.
My bad. Failed to notice you're not showing file extensions, so didn't realise the .bat files are actually there. Ignore original post.
After seeing the error have you tried booting into the phone?
Many times users say they get an error at the end of flashing with the Mi Flash Tool, but after, they can boot into MIUI and everything is fine. Not seen this error myself, so don't know if it's the same as your seeing.