[Q] How do I disable startup ring? - One (M7) Q&A, Help & Troubleshooting

Rooted
1. I renamed, deleted, made it silent .... /system/resource/HtC_Sense5_Boot.mp3
and it gets replaced with original upon reboot.
2. I changed the default.xml line that calls out that file
and it also gets replaced on bootup
what next ?

bocadave said:
Rooted
1. I renamed, deleted, made it silent .... /system/resource/HtC_Sense5_Boot.mp3
and it gets replaced with original upon reboot.
2. I changed the default.xml line that calls out that file
and it also gets replaced on bootup
what next ?
Click to expand...
Click to collapse
If it helps, if your phone is in silent before the reboot, it wont start the boot sound.
hope this gives you some direction to work on

You need to flash the module that disables the system protection (can be found in the One Android Development forum)
Sent from my HTC One using XDA Premium 4

Related

[MOD] Silent Battery Full Notification CWM3 Compatible

*Updated 2/6/11 to be flashable with CWM3 or less*
So, after many nights of being awakened by that annoying battery full audio notification I figured I'd do something about it. Here is a flashable zip that replaces the .ogg file that the system uses with a blank one. Will work on any ROM/File System.
Flash through CWM (v3.x or less):
leatherneck6017 said:
So, after many nights of being awakened by that annoying battery full audio notification I figured I'd do something about it. Here is a flashable zip that replaces the .ogg file that the system uses with a blank one. Will work on any ROM/File System.
Flash through CWM (v2.5.1.2 or less):
Click to expand...
Click to collapse
I did something similar to this in my newest version of my ROM, I took the original sound files and made the extension FILENAME.ogg.bak
This removes the sound but if you want it back you can just remove the ".bak" portion of the file name.
schizopunk said:
I did something similar to this in my newest version of my ROM, I took the original sound files and made the extension FILENAME.ogg.bak
This removes the sound but if you want it back you can just remove the ".bak" portion of the file name.
Click to expand...
Click to collapse
I had originally wanted to make a flashable zip that did just that (and also one to change it back)! But I wasn't able to figure out how to tell 'update-script' to do that .
leatherneck6017 said:
I had originally wanted to make a flashable zip that did just that (and also one to change it back)! But I wasn't able to figure out how to tell 'update-script' to do that .
Click to expand...
Click to collapse
I can help you out if you want, PM me.
leatherneck6017 said:
So, after many nights of being awakened by that annoying battery full audio notification I figured I'd do something about it. Here is a flashable zip that replaces the .ogg file that the system uses with a blank one. Will work on any ROM/File System.
Flash through CWM (v2.5.1.2 or less):
Click to expand...
Click to collapse
Worked like a charm! Now I can charge AND sleep!
Updated
Updated so it's CWM3 compatible.
What is the name of the sound file that makes the battery full notification sound? I'm too sleepy at night to determine which sound just woke me up.
Thanks.
edit: Is it TW_Battery_caution.ogg? I've renamed it with a .bak extension and charging my phone now.
Qukel said:
Is it TW_Battery_caution.ogg? I've renamed it with a .bak extension and charging my phone now.
Click to expand...
Click to collapse
Yep, that's the one.
Thanks this is great. Can also the blue light and notification be disabled cuz I'm getting disconnected every time when tether or usb tether I forgot which one when notification comes on.
Sent from my SPH-D700 using XDA App
Installing Silent BatteryFull Notification CWM3
I am a newbie to all of this, but am sick of being awake all night long with the battery notification waking me up and not being able to go back to sleep.
I found your post and attached file.
I have a droid X - global - motorola.
1. Will this work on this phone?
2. Are there any risks of damaging the rest of the operating system?
3. If no - how do I install this on the phone?
Any help to get me back to sleep would be appreciated.
Thank you
No this will not work on your phone. This is a MOD for the SAMSUNG EPIC 4G and ONLY the SAMSUNG EPIC 4G
EB13 OR DK28?
if DK28 i'd like to request an EB13 please
why does the file have to be replaced
why cant it just be removed using some sorta file explorer on the phone?
further more WTF is the reason for this sound other then to wake people up and/or piss them off? - as far as I know all phones stop charging when they get full so you wont over charge the phone

[MOD/HOW-TO] Remove hard key vibes via android.policy.jar

I thought I'd offer my solution to disabling the hard key vibrations on the Atrix since other people might find this useful. This method differs from the other solutions in that it doesn't tamper with your Silent Mode vibrations (like StreakVibrations does) and it's code based, so it shouldn't tamper with any themes you have installed (like the framework-res.apk method). It is firmware dependent though since it's a code modification.
You'll need an android.policy.jar modified for your firmware.
What I'm doing is I'm modifying the method called performHapticFeedbackLw, and telling it to skip triggering the vibrate pattern for all effects (there are 5) except for keyboard taps. Long press vibe, virtual key vibe, safe mode disabled vibe, and safe mode enabled vibe will no longer trigger... Incidentally, does anyone know what safe mode on this phone refers to?
To use the file, you need to be on Bell, Telstra, GingerBlur, Gladiatrix or stock ATT 1.8.3 firmware, and be deodexed. Can you copy the file to your phone without being deodexed? I don't know. I'm a programmer, but an Android newbie so just to be safe it's best if you're deodexed.
Before you try anything, obviously make sure you are backed up. At least copy your existing android.policy.jar so that you can restore it if necessary.
All you need to do is either:
a) Run the novibes.bat script packaged in the zip. There are a couple prerequisites:
1. Make sure to set your USB connection to "None" on your phone.
2. On your phone, go to Settings > Applications > Development and make sure USB debugging is turned on.
3. Plug your phone into your PC and let it install any necessary drivers.
4. Then you can run novibes.bat.
or
b) Follow the steps outlined below to do it manually:
1. Replace /system/framework/android.policy.jar with the one that I've attached.
2. Make sure the permissions of the file are set to rw-r--r-- (thanks for reminding me, Meloy and for correcting, natboy!). The easiest way is to use Root Explorer, long press the file, choose permissions, and set owner: read/write, group:read, others:read. Otherwise, use Terminal and type "chmod 644 /system/framework/android.policy.jar" without the quotations.
3. Reboot.
For those not on stock Bell, I'd be willing to modify your android.policy.jar and post it here if you provide somewhere for me to download it, and specify what firmware it comes from. It's quite quick to do once you're set up so I don't mind. Alternatively, make the change yourself:
1. Download baksmali and smali (both .jars and scripts, total 4 files).
2. Copy /system/framework/ from your phone to your computer.
3. Copy all the files from step 1 to the framework directory from step 2 on your computer.
4. Unzip android.policy.jar and copy its classes.dex file to the framework directory on your computer.
5. From the command line, navigate to the framework directory and run "./baksmali classes.dex". It will create a directory named "out".
6. Open "out/com/android/internal/policy/impl/PhoneWindowManager.smali" in a text editor.
7. Search for a method called "performHapticFeedbackLw". Go to near the bottom of that method, and you will see the Dalvik bytecode representation of a switch statement:
Code:
.sparse-switch
0x0 -> :sswitch_27 #This is for long press vibe
0x1 -> :sswitch_35 #This is for virtual key vibe
0x3 -> :sswitch_38 #This is for keyboard tap vibe
0x2710 -> :sswitch_3b #This is for safemode disabled vibe
0x2711 -> :sswitch_3e #This is for safemode enabled vibe
.end sparse-switch
8. Here's an example of how you might want it to change. Basically you want to replace the original goto labels with one that causes the method to step out without triggering a vibe, and that notifies the calling method there was no vibe by returning false. The label to use is called ":cond_1d":
Code:
.sparse-switch
0x0 -> :cond_1d #This is for long press vibe
0x1 -> :cond_1d #This is for virtual key vibe
0x3 -> :sswitch_38 #This is for keyboard tap vibe
0x2710 -> :cond_1d #This is for safemode disabled vibe
0x2711 -> :cond_1d #This is for safemode enabled vibe
.end sparse-switch
9. From the command line in the framework directory, run "./smali -o classes.dex out". You now have a new classes.dex that has your modification.
10. Zip up the classes.dex with the META-INF directory from your original android.policy.jar. Rename the zip to android.policy.jar.
11. Copy the new file to your phone and reboot.
12. At this point you should be done.
Will this be possible on the AT&T atrix? I currently use the streak vibe method but I'd like this much better.
Sent from my MB860 using XDA App
n1ckr0th said:
Will this be possible on the AT&T atrix? I currently use the streak vibe method but I'd like this much better.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1079873&page=3
Check out that thread over in general. The info for how to edit framework.res is there, but there is a flashable .zip that will disable the vibrations in either stock/rooted 1.83 or Gingerblur 3.5 for you.
bearsfan172 said:
http://forum.xda-developers.com/showthread.php?t=1079873&page=3
Check out that thread over in general. The info for how to edit framework.res is there, but there is a flashable .zip that will disable the vibrations in either stock/rooted 1.83 or Gingerblur 3.5 for you.
Click to expand...
Click to collapse
thank you, but i wonder if this specific method is possible on the atrix as to retain themes and such.
interesting that its in general, development may be a better home for it.
n1ckr0th said:
thank you, but i wonder if this specific method is possible on the atrix as to retain themes and such.
interesting that its in general, development may be a better home for it.
Click to expand...
Click to collapse
Yes, this would work perfectly fine on ATT. You can either follow the instructions I provided, or if you like you can post /system/framework/android.policy.jar from your phone somewhere and pm me the link so I can download it and I'll do it for you. Also mention what firmware you're on. I just don't want to download hundreds of MB of firmwares which is why I didn't set one up for all the ATT firmwares.
That other method requires editing a file that is guaranteed to change with any theme you install. That means anytime you change themes you'll need to edit that .apk yourself, or wait for someone to bring the change over. android.policy.jar is unlikely to change for themes.
Ok, I've posted a version for ATT 1.8.3 that was given to me by n1ckr0th.
n1ckr0th, let me know whether it works fine or not. There should be no problem, it looked just like the other 2 versions I modified.
Incidentally, he's using GingerBlur 3.5 so anyone on stock be careful (ie. copy your original file to somewhere else on your phone). It shouldn't matter at all because from what I see, there aren't any resources to modify in android.policy.jar so GingerBlur's should be the same as stock. At any rate, it won't brick your phone if you put the wrong one on. I put Telstra's on my phone by accident and it just messed up the the graphics on screen (maybe because the addresses were all wrong for my phone). You can still use adb, or sshdroid to copy and replace with your original android.policy.jar.
please delete
meloy said:
Don't use this on AT&T 1.83!
After the replace and reboot my phone was really laggy and some applications doesn't start anymore (camera, contacs for example). After i have replaced it with the original file i have still the same problem.
My phone config:
- SBF 1.83
- rooted (GingerBreak 1.20)
- sideloading enabled (GladEnabler)
- GladiAtrix 3 b0.2 ROM
- LauncherPRO
- GingerBread Theme only
Click to expand...
Click to collapse
What? That can't be right, if you still have the same problem after copying the original file, that means that you must have done something wrong. It's a single file change, provided you returned the file to the original, it will be back to the way it was. How did you copy the file? And also, are you deodexed? As mentioned in the original post, you have to be deodexed, because I don't know the results of using it on a non-deodexed system. Your posted config makes it sound like you might not be.
Sorry, my mistake. It is deodexed, I have just forgot to set the permissions to rw-r-r, you should maybe mention this in your start post. It's all working fine now. Thanks for the good work.
By the way, your mod (android.policy.att_1.8.3.zip) has added an "reboot" function to my phone, it is working well too.
meloy said:
Sorry, my mistake. It is deodexed, I have just forgot to set the permissions to rw-r-r, you should maybe mention this in your start post. It's all working fine now. Thanks for the good work.
By the way, your mod (android.policy.att_1.8.3.zip) has added an "reboot" function to my phone, it is working well too.
Click to expand...
Click to collapse
Haha, that's good. Had me scared for a moment, I didn't want to break anyone's phone!
Thanks for the tip, I'll mention that in the original post. Oh, and what do you mean by the reboot function...? Where did you access that? I certainly didn't add it, so it might be a mod added to GingerBlur?
maledyris said:
Oh, and what do you mean by the reboot function...? Where did you access that? I certainly didn't add it, so it might be a mod added to GingerBlur?
Click to expand...
Click to collapse
When i go to the phone options i have now these selection:
- Silent Mode
- Airplane Mode
- Power off
- Reboot
Yes, i think it is a GingerBlur mod. But it doesn't bother me, it is a good feature.
meloy said:
When i go to the phone options i have now these selection:
- Silent Mode
- Airplane Mode
- Power off
- Reboot
Yes, i think it is a GingerBlur mod. But it doesn't bother me, it is a good feature.
Click to expand...
Click to collapse
Interesting, that never occurred to me. I usually go into terminal and type in reboot to reboot my phone. I think I'll add that to my phone too...
maledyris said:
Haha, that's good. Had me scared for a moment, I didn't want to break anyone's phone!
Thanks for the tip, I'll mention that in the original post. Oh, and what do you mean by the reboot function...? Where did you access that? I certainly didn't add it, so it might be a mod added to GingerBlur?
Click to expand...
Click to collapse
the reboot function is cooked into GingerBlur. for some reason my phone wouldnt boot after i replaced the file? i used root explorer and set the permissions to whats specified.
n1ckr0th said:
the reboot function is cooked into GingerBlur. for some reason my phone wouldnt boot after i replaced the file? i used root explorer and set the permissions to whats specified.
Click to expand...
Click to collapse
Hmm, how far does it get? Do you at least get to the boot animation? I notice that it may sit at the boot animation for a really long time after changing a file sometimes. Probably updating the cache or something. It's odd that it wouldn't work for you considering it's your file and it worked for meloy. How did you copy the file over?
If you try again, delete the original file, so you can be sure it's no longer there, then try the copy again.
I'm on AT&T 1.8.3. I followed instructions just as in OP (yes, including the proper setting of permissions), but I soon found a significant problem. Everytime I held down my power button in order to invoke the power options menu, instead of the menu popping up, my phone just freaked out (the screen quickly FADED to black and the phone rebooted). I did this about four times, and each time it happened exactly the same. So I brought back the original framework file, and now everything works fine.
Any ideas?
I have no problems with this mod. It works all fine.
Been waiting on this mod. Streakvibrations has me missing my notification vibes. Thank you
It gave me a red light on boot, stuck at Motorola logo for infinity. I booted into recovery and reflashed gb 3.5 to fix it. Ill try your idea of deleting it then moving the new one.
Sent from my MB860 using XDA App
EDIT: still didnt boot, had to flash again..
I'm getting the flashing red light and rebooting as well. I can't get into CWM though, going to have to flash a SBF. Only think I can think of is maybe the Dalvik cache needs to be wiped before rebooting?
Edit: I'm on an AT&T phone and used GB to deodex as well.. maybe it's not catching all the files..
lurchbyrep said:
I'm on AT&T 1.8.3. I followed instructions just as in OP (yes, including the proper setting of permissions), but I soon found a significant problem. Everytime I held down my power button in order to invoke the power options menu, instead of the menu popping up, my phone just freaked out (the screen quickly FADED to black and the phone rebooted). I did this about four times, and each time it happened exactly the same. So I brought back the original framework file, and now everything works fine.
Any ideas?
Click to expand...
Click to collapse
Are you on stock 1.83? Now that we know that android.policy.jar has some mods built into it for Gingerblur pseudo rom, the att 1.83 file I posted probably isn't ideal for stock users.
If you're on stock, maybe you could post your android.policy.jar somewhere and pm me the link to download. Then I could put together a pure stock att one when I get home.
Sent from my MB860 using XDA App

[MOD] PRL Write Enabler for Sprint Galaxy S4 [MDC][MDL][MJA]

First off this work is based on Digiblur's PRL Write Enabler from the Sprint Galaxy S3 forum. I simply modified it & packaged it for our Sprint Galaxy S4 devices.
Here is the original S3 post that this was found in... http://forum.xda-developers.com/showthread.php?t=2159054
Also, post #8 below provides additional info.
I tested it by flashing with TWRP and it worked on my stock, rooted S4 with the MDC and MDL releases.
If you're on a stock rooted Rom and not using TWRP, you can just copy the HiddenMenu.apk from inside the zip file downloaded into /system/app/ and overwrite the one that's there. (You'll need a root enabled file browser to do this of course).
Thanks to Unknownforce here is a version for MJA...
http://www.androidfilehost.com/?fid=23212708291676468
Enjoy!!
This certainly will save me from having to use CDMA WS to switch like I just did yesterday. 55014 was not working well for me in my market so I switched back to 25014.
What is write enabler?
Keeps aborting for me
THEGAMEPLAY94 said:
Keeps aborting for me
Click to expand...
Click to collapse
You mean the install of the zip?
If so, you can pull the APK out of the zip and replace HiddenMenu.apk in the system folder (make a backup first). You may want to also set the permissions to rw-r-r after replacing the system app. Reboot, then you should be good to go.
@ChadH42,
I know it seems like I'm harping on you but I'm really not..
You need to update the OP on - 1. What is this? 2. What does this do? 3. Why is this in the Development Section.. ?
A good OP leads to less questions.. Development Sections aren't for information. That would be considered a Discussion Thread that belongs in General.
Let's keep the Dev section clean from the start.
My suggestion - Edit the OP on the What's/Why's?/How To's and you won't get posts like mine.
To the OP, updated your title as [WIP], and I suggest you provided additional information so that folks aren't bricking their new devices.
I will check in, if you need anything, let me know.
What this MOD does (in case the OP takes a little while to chime in)
What this MOD does is modifies our ##DATA# (select View) menu to allow for the PRL Write option to appear and function. With this menu option, the user can change their PRL on the fly from the device itself by placing a copy of the desired PRL in the root directory of Internal Storage and name it "test.prl" (no quotes), dial ##DATA# (choose View), tap Write PRL, tap the sub-menu option Write PRL ---wait--- and then the device reboots with the test.prl PRL applied upon reboot. Not every PRL works and sometimes it takes a couple of tries.
A tip for multiple PRL options is to, of course, keep a folder of the PRLs you like and keep them labeled in there. Copy the desired PRL to proper place as needed and just remember to rename the copy to "test.prl". Switch back and forth as you please. I hope this helps clear some confusion and helps some find purpose with the MOD like I have.
For a clear set of instructions that I did not want to just copy verbatim, check the link below. Also, if you are having issues with the zip not installing in CWM, just extract the APK from the ZIP (inside the system/app folder), use Root Explorer or your favorite root-access file explorer to place the APK in the APP folder, apply the proper permissions and reboot.
Ref from the GS3: http://forum.xda-developers.com/showthread.php?t=1748516
So I unzipped the file, replaced the hidden menu original apk with the new one, then set permissions, rebooted, then tried ##3282# and the view and edit options do not appear.. .. It just blanks out the items I just entered
Sent from my SPH-L720 using Tapatalk 2
jayjay7411 said:
So I unzipped the file, replaced the hidden menu original apk with the new one, then set permissions, rebooted, then tried ##3282# and the view and edit options do not appear.. .. It just blanks out the items I just entered
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
Did you clear Cache when you rebooted?
What ROM are you using?
ChadH42 said:
Did you clear Cache when you rebooted?
What ROM are you using?
Click to expand...
Click to collapse
+1...same thing is happenening to me...Im on force rom. when i type in the dialer code it just blanks out.
lilmikeyv said:
+1...same thing is happenening to me...Im on force rom. when i type in the dialer code it just blanks out.
Click to expand...
Click to collapse
I just tried this mod with the Force ROM and it did the same thing (blank options). The only thing I can think of is that it works with the odex version of the stock ROM so maybe its a problem with deodex ROMs of which Force is one.
O okay. Its currently not a necessary thing for me at the moment, just nice for when I travel to Alabama. Hopefully later on someone gets it working on deodex.
Sent from my Nexus 4 using Tapatalk 2
ChadH42 said:
I just tried this mod with the Force ROM and it did the same thing (blank options). The only thing I can think of is that it works with the odex version of the stock ROM so maybe its a problem with deodex ROMs of which Force is one.
Click to expand...
Click to collapse
I am actually running it on the Rooted Stock DeOdexed ROM. So I don't think it is an Odex/DeOdex issue...might be a Force ROM issue.
Also, moot point for Force ROM (1.0+) anyway because the PRL Write mod is already included with that.
I'm also having this problem and I'm pretty sure it was working this morning. I haven't flashed anything since then.
edit-- I tried:
1. wiping both cache's
2. killing background process "OIThiddenmenu"
neither fixed it.
I reinstalled the stock odex ROM and flashed this again and it worked.
Just an FYI, OP, I get Error Status 6 when trying to flash this via recovery, which indicates one of two things. Either the format of the file is incorrect or there is a syntax error. The syntax looks fine, but opening in basic Notepad shouldn't "look pretty" like it currently does. So it's likely it was edited with a non-Unix-compatible text editor like Notepad or MS-Word...
To make modifications to an updater-script (or just about any Android/Linux files like this) you need something like Notepad++ or gVim.
Anyways, I did a quick test with this, and it does in fact not work on my ROM as it is, but I see why it's failing, but I don't know what exactly it's trying to reference yet. (It fails with an id number instead of a name, so I'll have to de-compile some things to find it.)
I'm not sure it's a ROM issue or a MOD issue yet. (meaning it might have to be updated for each custom ROM, depending on how they are configured) But I'll track it down and update when I can.
Unknownforce said:
Just an FYI, OP, I get Error Status 6 when trying to flash this via recovery, which indicates one of two things. Either the format of the file is incorrect or there is a syntax error. The syntax looks fine, but opening in basic Notepad shouldn't "look pretty" like it currently does. So it's likely it was edited with a non-Unix-compatible text editor like Notepad or MS-Word...
To make modifications to an updater-script (or just about any Android/Linux files like this) you need something like Notepad++ or gVim.
Anyways, I did a quick test with this, and it does in fact not work on my ROM as it is, but I see why it's failing, but I don't know what exactly it's trying to reference yet. (It fails with an id number instead of a name, so I'll have to de-compile some things to find it.)
I'm not sure it's a ROM issue or a MOD issue yet. (meaning it might have to be updated for each custom ROM, depending on how they are configured) But I'll track it down and update when I can.
Click to expand...
Click to collapse
Thanks for all your help here..
I had the error status 6 problem in the beginning and thought I fixed it. You are correct that I used MS WordPad to edit the files.
ChadH42 said:
Thanks for all your help here..
I had the error status 6 problem in the beginning and thought I fixed it. You are correct that I used MS WordPad to edit the files.
Click to expand...
Click to collapse
I think TWRP can read the non Unix type characters, which is why it works on a different recovery.
I'm hoping it's a mod issue and I can just modify the mod to work universally regardless of the rom. But we'll see.
Sent from my SPH-L720 using xda app-developers app
fails in recovery for me.
says error executing updater binary in zip
in stock rooted...

[Q] Backlight of Softkeys

Hi there!
I want to disable the backlights of the softkeys, without installing an ad-filled apk.
I have installed Slimrom 4.3 from maclaw.pl and the setting to turn backlight off is invisible.
If you go with an rooted file explorer to /sys/class/leds/brightness and switch the value to 0, the backlight immediately turns off.
But if u restart the phone the value is changed everytime to 1 and the Backlight is back on.
So i thought i could write a script, that do this job for me., everytime i start my phome. The script is in the attachments.
Can anyone check if the script is okay? I dont want to brick my phone
And Do you know where the autostart folder for android devices is (like in windows), ive read something about kernel init or something.
And if i want to make a flashable zip out of this script, How to make it? because i dont want everytime i flash an update to work in the system.
Thanks for your time
Go to system settings-buttons-backlight & disable it. If that option it's not present on slim, simply download this. Don't mess with any system file cause this ain't a xperia phone:laugh:
Thanks, but my device is not listed under supported devices in this app and i dont want to keep a 3rd party app running that increases the battery drain and takes ram away. i prefer a little script at system start.
And no the option is not listed in the settings.
kinqme said:
Thanks, but my device is not listed under supported devices in this app and i dont want to keep a 3rd party app running that increases the battery drain and takes ram away. i prefer a little script at system start.
And no the option is not listed in the settings.
Click to expand...
Click to collapse
FYI, I'm using bln app & doesn't drain my bat nor ram (on cm11). Have a nice day
Okay i found that folder it is localized in /system/etc/init.d
I copied the file to there and it is workimg, on every restart the buttons keeps off.
But how to make a flashable zip with that file? is it enough to create a zip with the folder system and its contents are only th underfolder and the file?
kinqme said:
Okay i found that folder it is localized in /system/etc/init.d
I copied the file to there and it is workimg, on every restart the buttons keeps off.
But how to make a flashable zip with that file? is it enough to create a zip with the folder system and its contents are only th underfolder and the file?
Click to expand...
Click to collapse
Search on xda how to make it & if you sure it works I'll add it to my FAQ
Simple flashable fix for that http://www.mediafire.com/?dcq8si0xa1s348j
PolishVodka said:
Simple flashable fix for that http://www.mediafire.com/?dcq8si0xa1s348j
Click to expand...
Click to collapse
I asume it works on all maclaw roms (cm11) too, right!? Can I add it to my FAQ here. Of course I'll give you the proper credits on the special thanks section.
Here we go.
One zip to disable them and one to undo the patch.
thanks for your time
Can I add it to my FAQ?
Of course then other people who has the same problem can solve this problem
kinqme said:
Here we go.
One zip to disable them and one to undo the patch.
thanks for your time
Click to expand...
Click to collapse
Don't think so is good script, because when you got a notification than BLN turn on lights again and will be stay it on to second boot.
sorry my very first try.
i will look on my device, if this happens to me too
The only problem i had was with whatsapp, if u get a message there, the light keeps on till restart.
But in settings - notifications - lights in whatsapp u can turn off the notification lights and then the problem is solved. ( standard is white )
Tahnk you polishwodka
kinqme said:
Here we go.
One zip to disable them and one to undo the patch.
thanks for your time
Click to expand...
Click to collapse
Thanks

[Q] Removing AT&T boot animation

Now that we have root and are able to remove most traces of AT&T crap from this phone this is the only one left for me. Is this possible to remove yet with root access?
ROM Toolbox Pro does provide this as an option. I cannot say for sure that it will work/brick your phone. There are tutorials you can find on Google to create a qmg file and over write the existing one.
Use caution.
Let me know if you find something usable!
556AR said:
Now that we have root and are able to remove most traces of AT&T crap from this phone this is the only one left for me. Is this possible to remove yet with root access?
Click to expand...
Click to collapse
I have a tool that i wrote that will do exactly this and also enable any standard bootanimation check out this thread http://forum.xda-developers.com/showpost.php?p=53494610&postcount=1 remember it is beta and is being updated also make sure you download the patch file from the attachments its needed to make the bootanimation tweak work
I renamed the boot animation file by adding a ".bak" at the end of it. That took care of the boot animation, however, the sound remained. I disabled the boot sound with Wanam if I remember correctly. No problems so far.
Sent from my SAMSUNG-SM-G900A using XDA Premium 4 mobile app
sutehk said:
I renamed the boot animation file by adding a ".bak" at the end of it. That took care of the boot animation, however, the sound remained. I disabled the boot sound with Wanam if I remember correctly. No problems so far.
Sent from my SAMSUNG-SM-G900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Where's the animation file at?
/system/bin
The boot sound can be disabled in Wanam under the sound heading. Just double checked to be sure.
Sent from my SAMSUNG-SM-G900A using XDA Premium 4 mobile app

Categories

Resources