Database Develop

[ROM] P500 Optimus G -Updated-

Presenting the the Optimus G. Despite its name, it's for the P500 Optimus One
It has the following specs
Rom based on EU V10C
Deodexed
ZipAligned
Rooted
mik_os 1.1 kernel with lagfix
jit on
hw acceleration off
Launcher Pro
Circular battery and some other fix to the theme
Added Reboot and Recovery to the powermenu
Hostfile updated to remove adds
No App2sd
This is a lite rom, install what you need from the market. If you want to OC, download the setcpu and install/run
Download
http://www.multiupload.com/5E2TKZVIVL
Install
First of all you need a recovery installed on you phone, check this thread
Reboot into recovery using Vol down + home + powerbutton
Partition the sdcard with 0% swap 0% ext and 100% Fat32 (optional)
Wipe all
Flash the Optimus G rom
First boot will take some time.

chlyug said:
No App2sd
No need for a ext part on the sd card
wipe before flashing
first boot will take some time, but you all know this by now
Click to expand...
Click to collapse
No app2sd? why?
No need for a ext part on the sd card
could you explain more?
Also is it for OO or V,T,S? (Optimus G ?)
? ? ? ? ?

taha198 said:
No app2sd? why?
No need for a ext part on the sd card
could you explain more?
Also is it for OO or V,T,S? (Optimus G ?)
? ? ? ? ?
Click to expand...
Click to collapse
I have beliefs its for optimous t and s .... most roms work well with both devices and G is just the name of the build ithink
Sent from my LG-P500 using XDA App

Well its for the P500 Optimus One, should have selected a differnt name

taha198 said:
No app2sd? why?
No need for a ext part on the sd card
could you explain more?
Also is it for OO or V,T,S? (Optimus G ?)
? ? ? ? ?
Click to expand...
Click to collapse
I went for no app2sd to provide a rom for those that have a slow sd-card or have dismount problems or just dont have that many apps on the phone.
If you want a version with app2sd just say so and ill cook one.
And as there isent any apps2sd you can partition the sdcard 100% fat32 so all space is avalible for mp3 pics or whatever you want on it.
The rom is for the P500 Optimus One.

thanks for clariying the doubts.
Will give it a try.

Someone have tested this ROM? how it works?

[KERNEL] 4 Apr r4: MoDaCo Custom Kernel for the LG 2X - Stock Edition (2.6.32.9)

This topic is for my MoDaCo Custom Kernel for the LG Optimus 2x - Stock Edition
Features include...
Based on the LG source
[*]Kernel version 2.6.32.9
Includes EXT4 support (with optional EXT4 conversion on install)
Includes CIFS and TUN modules
Two downloads area available, one for users who wish to stay on EXT3 and one for users who would like their device converted to EXT4 on install (without data loss).
r4 DOWNLOAD - EXT4 version (ROMraid Load Balancing) - MD5: 55470db6a9cb5a88716210de5afbfbb1
r4 DOWNLOAD - EXT3 version (ROMraid Load Balancing) - MD5: ae9d85a37bb6fe439f12066d20345df8
Installation should be carried out via ClockworkMod, please do a backup first! This kernel should be compatible with all stock and custom ROMs.
Enjoy!
P
PS I will be posting the full sources on my GitHub in due course.

keep up the great work paul

Does this change alot?

Redshark976 said:
Does this change alot?
Click to expand...
Click to collapse
Fastest kernel I used!
3400 quadrant, without overclock! Very snappy

Hi,
I'm coming from MCR fr17 Fear Kill edition 10.. it is using the 2.6.32.8 kernel.
My questions are as per below (Sorry I'm new to android devices and trying my best to learn):
a) When flashing a new kernel, I just put it in my SD card and flash it in recovery correct? Or do I need to perform a wipe before doing so? Need to clear any cache etc?
b) For those that have tested this kernel, care to upload the stable voltage for 1000 mhz, 1200mhz and 1300mhz?
c) What if I undervolted it so much that it isnt a stable voltage? Will my phone be a brick?
Thanks to all that take the time to guide a noob like me.

kelvin_tan said:
Hi,
I'm coming from MCR fr17 Fear Kill edition 10.. it is using the 2.6.32.8 kernel.
My questions are as per below (Sorry I'm new to android devices and trying my best to learn):
a) When flashing a new kernel, I just put it in my SD card and flash it in recovery correct? Or do I need to perform a wipe before doing so? Need to clear any cache etc?
b) For those that have tested this kernel, care to upload the stable voltage for 1000 mhz, 1200mhz and 1300mhz?
c) What if I undervolted it so much that it isnt a stable voltage? Will my phone be a brick?
Thanks to all that take the time to guide a noob like me.
Click to expand...
Click to collapse
In Pimp my CPU, use the stress test to see if its stable. Use the settings without saving it so you dont boot with those settings. But just to make sure, make a backup of the rom if absolute everything f*cks up.
Sent from my LG-P990 using Tapatalk

Currently I cant even run a CPU Stress Test. When I do, the application will be forced closed.
Do take note that I havent flashed in this new kernel yet.. Using 2.6.32.8 atm

I flashed this Kernel with Stock ROM, but I found that my existing Pimp my CPU not work anymore. Please suggest use with version is fine, Thanks.

Same, this kernel doesn't support PimpCPU I believe. Nevertheless, it's the most stable kernel that I've tried so far...

What advantages are their of converting to ext4? Looking for a good kernel current running modaco fr17 will this be ok?
Sent from my LG-P990 using XDA Premium App

Please delete...

salisbury_steak said:
Same, this kernel doesn't support PimpCPU I believe. Nevertheless, it's the most stable kernel that I've tried so far...
Click to expand...
Click to collapse
it's not a OC kernel so its normal that PimpMyCpu not work...

ilos said:
it's not a OC kernel so its normal that PimpMyCpu not work...
Click to expand...
Click to collapse
I'm actually not looking for an OC, I was looking for a UV.

Sorry if it is a noobish question but wat advantage does this bring over stock kernel?
Sent from my LG-P990 using Tapatalk

This kernel provides ext4 support. And a small fix I believe. So the advantage is a general speed improvement with phone usage.
Guys, my O2X just got updated (via LG PC Suite) to v10d. I already rooted it, but can anyone confirm if this kernel still works with it?

salisbury_steak said:
This kernel provides ext4 support. And a small fix I believe. So the advantage is a general speed improvement with phone usage.
Guys, my O2X just got updated (via LG PC Suite) to v10d. I already rooted it, but can anyone confirm if this kernel still works with it?
Click to expand...
Click to collapse
doesn't seem to be compatible with v10d (Philippines)...

Thanks for the confirmation pare! :-D

salisbury_steak said:
Thanks for the confirmation pare! :-D
Click to expand...
Click to collapse
no problem. i hope we get an updated version of this kernel...

is this working for MoDaCo FR19 Fear Edition 12.2 ROM? because i get stuck at the lg logo.. or maybe can someone list down the exact steps to flash this kernel..

[Q] What tweaks should i use to make my phone responsive and snappy ?

Hi every one , iam running Ginger bread XWJVZ 2.3.6 and a custom ROM ( Hybrid Rom latest version XWJVXZ ) and semaphore jvz 2.1.1
I think the rom has Thunderbolt already built in , iam asking u guys what else can i tweak to make my phone faster ??? i have ROM toolbox and semaphore tweaker
thx

enigma575 said:
Hi every one , iam running Ginger bread XWJVZ 2.3.6 and a custom ROM ( Hybrid Rom latest version XWJVXZ ) and semaphore jvz 2.1.1
I think the rom has Thunderbolt already built in , iam asking u guys what else can i tweak to make my phone faster ??? i have ROM toolbox and semaphore tweaker
thx
Click to expand...
Click to collapse
CM 7.1....

zolah said:
CM 7.1....
Click to expand...
Click to collapse
as far as i know , CM is not as stable as Samsung based roms
any suggestions on sammy based tweaks ?

Stock odexed jvt, Semaphore kernel 2.1.1 bm, use smartassv2 governor and sio scheduler, remove all Samsung bloatware, use ext4, wipe cache and dalvik, set low memory to 64 mb
Sent using TCP/IP

Try tornado rom - you will never look back...

i heard about that, were can u download it? evrywhere ive looked for that some other stuff comes up, usually its foreign so dont understand it

GalaxySN00B:0 said:
i heard about that, were can u download it? evrywhere ive looked for that some other stuff comes up, usually its foreign so dont understand it
Click to expand...
Click to collapse
http://damiangto.emc2production.org/index.php?sid=efe259a88b31669283caeda4d6ac7d04
Click to expand...
Click to collapse
here ..Go try it out

gsw5700 said:
Stock odexed jvt, Semaphore kernel 2.1.1 bm, use smartassv2 governor and sio scheduler, remove all Samsung bloatware, use ext4, wipe cache and dalvik, set low memory to 64 mb
Sent using TCP/IP
Click to expand...
Click to collapse
ok i have set the governor to smartassv2 , i think i don't have samsung's bloatware already ( the stock apps that comes with rom )
iam already on ext4 ,wiped cash and dalvik
how can i set low memory to 64 ????????
also can you explain to me what is a governor ? and what will the smartassv2 do ? thx

enigma575 said:
ok i have set the governor to smartassv2 , i think i don't have samsung's bloatware already ( the stock apps that comes with rom )
iam already on ext4 ,wiped cash and dalvik
how can i set low memory to 64 ????????
also can you explain to me what is a governor ? and what will the smartassv2 do ? thx
Click to expand...
Click to collapse
use the semaphore app to set low memory value to 64 mb, more free memory means less lag when you run something. you get another 15mb or so witb bm kernel. The govenor basically controls how fast or slow the cpu runs and reacts to demand. Smartassv2 is responsive, especially with sio i/o scheduler. use semaphore app to set readahead to say 512mb, you might also like the more sensitive screen.
Sent using TCP/IP

gsw5700 said:
use the semaphore app to set low memory value to 64 mb, more free memory means less lag when you run something. you get another 15mb or so witb bm kernel. The govenor basically controls how fast or slow the cpu runs and reacts to demand. Smartassv2 is responsive, especially with sio i/o scheduler. use semaphore app to set readahead to say 512mb, you might also like the more sensitive screen.
Sent using TCP/IP
Click to expand...
Click to collapse
thanks so much , i hit the thank button
i have one more problem , which is the icon of WIFI and signal , they are always grey , when i apply a custom skin for the signal , it only shows up when i turn wifi on , when i turn wifi off , the signal returns to the grey color again , any fix ?

gsw5700 said:
use the semaphore app to set low memory value to 64 mb, more free memory means less lag when you run something. you get another 15mb or so witb bm kernel. The govenor basically controls how fast or slow the cpu runs and reacts to demand. Smartassv2 is responsive, especially with sio i/o scheduler. use semaphore app to set readahead to say 512mb, you might also like the more sensitive screen.
Sent using TCP/IP
Click to expand...
Click to collapse
I thought that with the "bm" kernal you lose HD recording.

You do lose hd recording, but you can still get great videos. If you do need full hd recording, flash non bm semaphor, after recording, flash bm back. Its very easy with sgs flasher
Sent using TCP/IP

pk1025 said:
I thought that with the "bm" kernal you lose HD recording.
Click to expand...
Click to collapse
you do lose hd recording indeed
iam now on cm 7.1 though

http://forum.xda-developers.com/showthread.php?t=1296927

[Q] what are the best configs?

hi there.
(i have a 16gb sdcard)
i am just asking what are the best configurations for our galaxy ace
the best performance kernels roms scripts and tweaks
and the best battery savers kernels roms scripts and tweaks
i know how to flash
i have clockworkmod recovery and kernel CF-Root-S5830-v3.7-b84 and 2.3.6 stock rom
i also use link2sd, titanium backup , root explorer
i know that's kind of noob stuff to say. but just for sharing
kernel :
2.6.35.7-perf-CL807529
[email protected] #1
oh, and i cant make Adrenaline™ CPU Control to work
terminal says not found when i write clock
by the way, i am Portuguese

mariosoares said:
hi there.
(i have a 16gb sdcard)
i am just asking what are the best configurations for our galaxy ace
the best performance kernels roms scripts and tweaks
and the best battery savers kernels roms scripts and tweaks
i know how to flash
i have clockworkmod recovery and kernel CF-Root-S5830-v3.7-b84 and 2.3.6 stock rom
i also use link2sd, titanium backup , root explorer
i know that's kind of noob stuff to say. but just for sharing
kernel :
2.6.35.7-perf-CL807529
[email protected] #1
oh, and i cant make Adrenaline™ CPU Control to work
terminal says not found when i write clock
by the way, i am Portuguese
Click to expand...
Click to collapse
try CM7.2-RC3-APOCALYPSE [17.06.12] [FireKernel OC] best custom CM rom available for SGA.

there's no more replies about this?
i need more opinions and post's
to help me figure out this situation

So....scripts:
Adrenilline engine, Slaidy boost
ROMS
Bugless:SGS II V9
FAST: Apocolapce
Stockish: Stocklite v7.1
Kernal:
Depends on you
Settings:
CPU freqauncy: 480-806 MHz
Govenor: SmartAzz v2, performance, battery booster
And maby add a swap partition but it could kill your SD

Hi there,
I'm new to xda-developers but not completely new to android. I have also created my own ROM, which is pretty amazing trust me, but apparently I am not allowed to share it with others unless I get quite a lot of thanks and stuff so if this helps you please press the thank button.
OK, here we go:
ROM => (CM7.2 vo-1) =>http://forum.xda-developers.com/showthread.php?t=1360889&highlight=cyanogenmod+7+2+rc1+by+vo-1
the kernel on this ROM is perfect so you don't need to change the kernel.
Script => (Adrenaline™ Engine) =>http://forum.xda-developers.com/showthread.php?t=1579710&highlight=adrenaline+engine
this script will do, you don't need to fill your phone with scripts and stuff ok
Note!! => CM7.2 (cyanogenmod 7.2) is obviously not in need of any app or script to control the CPU, to do so simply go to settings>cyanogenmod settings>performance>cpu and there you could do whatever you want. also cynogenmod is apparently asked by google to not include their apps in the rom so you will have to flash them your self to do so simply click on this link to download them >>>I'm a link<<< and then flash the zip through clockwork mod ...
Also you may decrease the force closes by making a swap partition on your sd since you have a 16gb one. this also helps to smooth out some games and you will be able to do more multi tasking. to do this reboot into clockwork mod... (note if you partition your sd you will loose all data so copy all the things you have there to your pc and another thing partitioning your sd could decrease the sd lifetime) then choose advance next choose partition sd card now it will ask you to set the size choose 256mb and 256mb again thats more than enough for me but its always up to you mate.
once you have done all that and everything is up and running download root explorer or any app that allows you to access root directory. since cyanogenmod comes with this ****ing ADWlauncher (no offence to the devs) you defiantly gonna have to change it. this holo launcher thingy is the best home launcher ever so here is the link http://forum.xda-developers.com/showthread.php?t=1636478 download the latest stable version. now use your root file manager to move the apk file to this location /system/app then change the permissions to rw-r--r-- ok? now delete Adwlauncher.apk and adwlauncher.odex go it ? note!! install another launcher like launcher pro before you do just in case anything goes wrong. reboot now. cool.
there are many things you could do mate but I don't even know if you will use or read all of that so this is it for now if you run into any problem or want more stuff and tweaks let me know ill be more than happy to help
and good luck

hmm, i'm using team 16 gb class 10 and a2sd.. my config is 2gb for sd-ext and 100mb for swap with swappines 60%..
my rom is lewa without any script, i don't like placebo script..
best kernel for battery : firekernel
everything runs great for me

[EzyICS Kernel v1][6800] For Stock XXLQ1 Overclock / Undervolt + Optimisations etc.

EzyICS Kernel v1
for 6800 For Stock XXLQ1 (Austrian) Roms
FEATURES - Version 1 (31/07/12)
1) Built from GT-P6800_ICS_Opensource_Update1.zip
(Thanks Samsung for broken config settings. / Took me ages to figure out some kernel issues!!!)
2) Various compiler optimizations (neon etc.) ( Debug stuff remains for now but will be taken after some more mods are added )
So should get smoother / more optimised in time
3)Mali state tracking disabled
4) Removed MMC_CAP_ERASE (BrickBug)
5) /etc/init.d/S* script support
Add your various tweak / ramscripts from custom roms etc. here
6) Added Pegasusq Governor - (recommend as it deals better with multi-cpu devices like our tabs but may require some tweaking)
7) Overclocking Support upto - 1600 mhz
(ICS changes how frequency control is implemented so not as easily overclockable as honeycomb.)
Fixed CPU Boot Up frequencies to default values / not overclocked settings
8) Undervolting Support:
Some of my settings - (ALL DEVICES will be different)
I have only tried undervolting at these frequencies so far 200 / 500 / 16000 hz (As these are the most used)
So far running pretty stable on:
1600 mhz -------------------> 1300mv
1400 mhz -------------------> 1250mv
1200 mhz -------------------> 1175mv
1000 mhz -------------------> 1075mv
800 mhz ---------------------> 1000mv
500 mhz ---------------------> 875mv
200 mhz ---------------------> 875mv
Use SetCpu to change voltages or cpu overclocks.
9) Slightly undervolted GPU voltages
(As ICS is not as overclockable as honeycomb - needed to reduce heat)
Reduced by 50mv for default GPU levels
10) Bootanimation support
place in /system/media
11) in built CIFS support
Changed Max_BUFFER Size to max 130084
Thanks to Pinkowl for first supporting this.
In cifs options put:
rsize=130048
12) NFS share mounting.
13) UDF & ISO support - i.e native bluray disk support.
Other optimizations & stuff - to be added.
Believe me this stuff takes a whole lot of time to do & test - with high risk etc.
Please support my works and further development on 7.7 tabs by purchasing my apps (only 1 for now on google play. Latest version adds MTP/UMS switching for 7.7 tabs)
https://play.google.com/store/apps/details?id=hokikoki.ezymountcontrol&hl=en
Installation:
**Important***
Make sure backup your device first in CWM.
As this is a kernel only - it does not flash over your data/apps/system etc you should be able to simply restore boot.img from advanced restore settings in CWM if things go wrong. I have done this myself.
I am still using my previous cwm (honeycomb based kernel) and it is working fine for me. So should any other honeycomb based kernel cwm recoveries should be ok too)
1) You can either simply flash zImage using heimdall:
(THIS WILL INCREASE YOUR BINARY DOWNLOAD COUNT OR WHATEVER ITS CALLED)
sudo heimdall flash --kernel zImage
(zImage is in cwm flashable zip file)
or
2) Flash in the CWM
p6800_EzyICSKernel.zip
No need to wipe data cache
( I need someone to confirm that CWM flashing works, as I use heimdall)
Usual disclaimer - flash at your own risk.
(Souces code changes added below)
Cheers,
List of Reported Issues - to be addressed in next version hopefully.
Although there is no reason to wipe data / cache etc when using this kernel or restoring stock kernel.
1) Wiping from within Android ICS may cause boot loops.
If you insist of wiping within Android ICS - please go back to stock kernel- first restore (stock kernel) boot.img from andvanced restore / in cwm. then do a wipe
Alternatively - just wipe in data/cache in CWM and you should be fine.
ezynow

Yeah!

Cwm works fine. Noticeable perfomance increase.

{Diemex} said:
Cwm works fine. Noticeable perfomance increase.
Click to expand...
Click to collapse
Good to know.
This just a base kernel really (some unnecessary things left in) - should get better and smoother in time

Idem...installation ok with Recovery Custom v6.....I test my machine for The moment......all is ok....nosoftbrick!
+1 for your appli!

ezynow said:
EzyICS Kernel v1
Please support my works and further developmen
https://play.google.com/store/apps/d...zymountcontrol
Click to expand...
Click to collapse
link is not working

EzyMount....play store

https://play.google.com/store/apps/...e=google&utm_medium=organic&utm_term=ezymount
☞ From my Humans Phone | Jelly Bean using Tapatalk

i have already found him, thx.

bamserl said:
i have already found him, thx.
Click to expand...
Click to collapse
Cheers - updated now

Hello ezynow
Does this Kernel solve issue with internal memory partitions ? , I have my Tablet issue with custom ROM and I had to move DATAFS and FACTORYS Partitions in order to make Tablet work , it doesn't accept flashing by ODIN but it can work with Aroma ROM , so can this Kernel help my problem to restore lost partition are ?

amroman said:
Hello ezynow
Does this Kernel solve issue with internal memory partitions ? , I have my Tablet issue with custom ROM and I had to move DATAFS and FACTORYS Partitions in order to make Tablet work , it doesn't accept flashing by ODIN but it can work with Aroma ROM , so can this Kernel help my problem to restore lost partition are ?
Click to expand...
Click to collapse
It will not change the partition structure.
Have you tried heimdall. I would suggest try using one of the first released honeycomb firmwares as it should be a wipe one i am guessing.
Once back on hc then flash ics.
Worth a try.

So by flashing this kernel i can overclock in Setcpu to 1600mhz?

Applied this server over ICS Quckisilver 1 pre. Works perfect. Udervolted by 50 throughout the full spectrum.
Sent from my GT-P6800 using Tapatalk 2

ezynow said:
It will not change the partition structure.
Have you tried heimdall. I would suggest try using one of the first released honeycomb firmwares as it should be a wipe one i am guessing.
Once back on hc then flash ics.
Worth a try.
Click to expand...
Click to collapse
Hello
I tried many times to access device using heimdall but i receive error
Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -12
I tried Zadig as well but no luck at all , any suggestions ?

CM9 ?
I'm taking from past experience that this will not work with cm9? am I right? If yes Could you make one for cm9 for my p6800?
Verry much appreciate your work! I love OC UV-ing!!!

amroman said:
Hello
I tried many times to access device using heimdall but i receive error
Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -12
I tried Zadig as well but no luck at all , any suggestions ?
Click to expand...
Click to collapse
Are you in download mode. I use linux for heimdall so if its a driver issue you will need to specific ones for your distro. Besides having a faulty emmc you should be able to get back to working state. you will need to repartition i suspect but try flashing first.
zsolti256 said:
I'm taking from past experience that this will not work with cm9? am I right? If yes Could you make one for cm9 for my p6800?
Verry much appreciate your work! I love OC UV-ing!!!
Click to expand...
Click to collapse
Cm9 is pretty much vanilla android /linux - so different enough to be incompatible but could be done. This version is a long way off before i could do so anytime soon.

thanks for this awesome kernel.
If anyone has found a way to decrease brightness A LOT below factory thresholds, I would be delighted to know.
Thing is way to bright in a plane or in bed.

lucid said:
thanks for this awesome kernel.
If anyone has found a way to decrease brightness A LOT below factory thresholds, I would be delighted to know.
Thing is way to bright in a plane or in bed.
Click to expand...
Click to collapse
there is an app for that, called screenfilter

Great finally an ICS custom kernel!!!!
Do you think you have any chance to implement LCD undervolting? I come from the original Tab and this can increasw amazingly the battery life
Sent from my GT-P6800 using xda app-developers app