Hi everyone,
Recently I tried to follow a post from xda dev on putting a new kernel on my HTC Desire C.
Although I followed all the steps I am now unable to get past the boot screen wit the htc logo.
I have tried a number of solutions to make it work but nothing so far, backup recovery failed, changing to another kernel failed.
I think that at this point it might be bricked, and all that I can see is the logo and a disclaimer message.
Does anyone has any idea if I could fix it, and what do I need to do?
Kind regards,
Florin
Edit: thanks to aashay960 for telling me how to fix this.
The solution was to reinstall kernel and rom (since I made a mess of it initially)
Current config : CyanogenMod 10 + N.O.P.E Kernel 875Mhz
sir_florin90 said:
Hi everyone,
Recently I tried to follow a post from xda dev on putting a new kernel on my HTC Desire C.
Although I followed all the steps I am now unable to get past the boot screen wit the htc logo.
I have tried a number of solutions to make it work but nothing so far, backup recovery failed, changing to another kernel failed.
I think that at this point it might be bricked, and all that I can see is the logo and a disclaimer message.
Does anyone has any idea if I could fix it, and what do I need to do?
Kind regards,
Florin
Click to expand...
Click to collapse
Its not bricked. Tell me which kernel you are trying, with which rom? And try flashing a lower frequency kernel.
aashay960 said:
Its not bricked. Tell me which kernel you are trying, with which rom? And try flashing a lower frequency kernel.
Click to expand...
Click to collapse
I tried the Prometheus Kernel for sense linked in your signature with the stock. I got to the HTC logo screen and it got stuck there. It might be that the method I used was wrong.
Would it be possible to use the ones you do? Cyanogem mode and the N.O.P.E Kernel?
Can I install them only with recovery? And is there and "xda approved" method of installing kernels and custom roms?
Thanks,
Florin
Flash a lower frequency Prometheus Sense Kernel from fastboot.
You cannot use nope for sense roms. Nope is for Jellybean roms only.
As of now we have two ways to flash a kernel on this device. One is fastboot, which I personally use. Second is the auto Boot.img flasher that you will find if you search..
For now, tell me what frequency you tried. And try a lower one.
aashay960 said:
Flash a lower frequency Prometheus Sense Kernel from fastboot.
You cannot use nope for sense roms. Nope is for Jellybean roms only.
As of now we have two ways to flash a kernel on this device. One is fastboot, which I personally use. Second is the auto Boot.img flasher that you will find if you search..
For now, tell me what frequency you tried. And try a lower one.
Click to expand...
Click to collapse
Hi, I forgot to mention in the previous one that I initially used the 816 one, and then switched to the lower one 767.
Is it worth it to try a "clean install" as in a new configuration with a new kernel and rom?
No a wipe is not necessary.
Just make sure you do
Fastboot erase cache
Fastboot flash boot boot.img
Try an even lower one.
Now that your bootloader is unlocked. Why not try a custom rom?
aashay960 said:
No a wipe is not necessary.
Just make sure you do
Fastboot erase cache
Fastboot flash boot boot.img
Try an even lower one.
Now that your bootloader is unlocked. Why not try a custom rom?
Click to expand...
Click to collapse
What rom do you have in mind? I was thinking about cyanogen
sir_florin90 said:
What rom do you have in mind? I was thinking about cyanogen
Click to expand...
Click to collapse
Yeah that seems to be the most popular rom around. Been using it for a long time..
You can look at other options too. You can't really go wrong with any...
Just make sure to flash nope kernel with a jb rom.
aashay960 said:
Yeah that seems to be the most popular rom around. Been using it for a long time..
You can look at other options too. You can't really go wrong with any...
Just make sure to flash nope kernel with a jb rom.
Click to expand...
Click to collapse
I have noticed: CyanogenMod 10 + N.O.P.E Kernel 875Mhz.
Is this for you desire C?
Yes that is..
aashay960 said:
Yes that is..
Click to expand...
Click to collapse
Thanks man, the phone is back alive. I was feeling so bad when I realised it might be bricked. Thanks again :d
Pls delete.
wilberfish said:
Pls delete.
Click to expand...
Click to collapse
Why would you ask a thread to be deleted without the consent of the OP
Sorry. My bad, I was referring to my post.
I seem to be having connection problems with the xda app resulting in posts when I thank people and only getting notification of successful posts when I am reading another thread!
Sorry for the confusion I caused.
wilberfish said:
Sorry. My bad, I was referring to my post.
I seem to be having connection problems with the xda app resulting in posts when I thank people and only getting notification of successful posts when I am reading another thread!
Sorry for the confusion I caused.
Click to expand...
Click to collapse
Oh its ok, I didnt get what you said. Some tips if you want someone to disregard your post just put a "Deleted." or "[Deleted]" tag.
OK. Thanks.
Related
A search found me nothing sooo... Can i just push a new kernel? From an already custom kernel. Right now i have intersectravens and my battery life is horrible. I wanna flash to a better kernel but not sure which. Help?
-Thanks
Yes, make sure you replace the proper wifi driver that matches the new kernal so you don't break wifi.
http://forum.xda-developers.com/showthread.php?t=633238
I use this kernel. Do a nandroid first just to be safe and flash the kernel of your choice.
I was thinking about this one 800 OC
http://forum.xda-developers.com/showthread.php?t=654416
Could i just simply do the install steps?
Yes.
Pushing of the bcm4329.ko is necessary as WiFi support would be broken otherwise. If you don't do it, WiFi will not work.
can someone tell me how to change a kernel to a different one? Some require to load up fastboot and type commands. I dont know how to do that. the one I have I just flashed in recovery
Buck Shot said:
can someone tell me how to change a kernel to a different one? Some require to load up fastboot and type commands. I dont know how to do that. the one I have I just flashed in recovery
Click to expand...
Click to collapse
Yup - read the first post in a thread on a kernel you'd like to flash. Easy!
Buck Shot said:
can someone tell me how to change a kernel to a different one? Some require to load up fastboot and type commands. I dont know how to do that. the one I have I just flashed in recovery
Click to expand...
Click to collapse
How did you unlock your phone without fastboot?
Hi Guys,
Yesterday I tried to flash CM7 latest nightly build on my Incredible S, but got stuck on boot animation.
I was on NIK project X v4, I assume that that zip is missing something that's why I didn't boot.
Can anyone help me with the same??
mohitgalaxy3 said:
Hi Guys,
Yesterday I tried to flash CM7 latest nightly build on my Incredible S, but got stuck on boot animation.
I was on NIK project X v4, I assume that that zip is missing something that's why I didn't boot.
Can anyone help me with the same??
Click to expand...
Click to collapse
Have not had that issue
Nonverbose said:
Have not had that issue
Click to expand...
Click to collapse
I have flashed CM7 lastest nightly and I didn't boot it up and at the same time I have flashed the gbgapps zip as well.
Can that be a problem or not ??
Figured it out my self, flashing the google app without booting cause the boot loop.
Thread closed
Nonverbose said:
Have not had that issue
Click to expand...
Click to collapse
Ok one more thing, you are using CM7, so can you guide me to some MODS, themes some good stuff?
mohitgalaxy3 said:
Ok one more thing, you are using CM7, so can you guide me to some MODS, themes some good stuff?
Click to expand...
Click to collapse
I use ics theme https://play.google.com/store/apps/details?id=com.sonny.theme.ics
Also GO launcher
Nonverbose said:
I use ics theme https://play.google.com/store/apps/details?id=com.sonny.theme.ics
Also GO launcher
Click to expand...
Click to collapse
Wifi is not working for me, please help what should I do, should I replace wpa_supplicant file.
Go backup must have restored access points that could be a problem??
If yes can you please upload your wpa_supplicant file, you will find it in data\misc\wifi..
mohitgalaxy3 said:
Wifi is not working for me, please help what should I do, should I replace wpa_supplicant file.
Go backup must have restored access points that could be a problem??
If yes can you please upload your wpa_supplicant file, you will find it in data\misc\wifi..
Click to expand...
Click to collapse
Sounds like you're s-on and either didn't flash your boot.img in fastboot or, more likely didn't push your wifi module (/system/lib/modules/bcm4329.ko)
Nonverbose said:
Sounds like you're s-on and either didn't flash your boot.img in fastboot or, more likely didn't push your wifi module (/system/lib/modules/bcm4329.ko)
Click to expand...
Click to collapse
I have S-OFF, black rose.
No I haven't flash boot.img in fastboot.
Tell me what exactly i need to do make it working please.
Should I flash/push the wifi module from any other sense 4 rom, will that do the trick??
mohitgalaxy3 said:
I have S-OFF, black rose.
No I haven't flash boot.img in fastboot.
Tell me what exactly i need to do make it working please.
Should I flash/push the wifi module from any other sense 4 rom, will that do the trick??
Click to expand...
Click to collapse
If you're s-off you shouldn't be having that issue. Did you clear cache and dalvik when you flashed cm7?
Edit: what version radio are you on?
Nonverbose said:
If you're s-off you shouldn't be having that issue. Did you clear cache and dalvik when you flashed cm7?
Edit: what version radio are you on?
Click to expand...
Click to collapse
I have flashed the ARDH wipe script bfr flashing CM7 and I am on 11_M. the ics one radio.
mohitgalaxy3 said:
I have flashed the ARDH wipe script bfr flashing CM7 and I am on 11_M. the ics one radio.
Click to expand...
Click to collapse
Try rolling back to revolutionary hboot and a GB radio (the one in my sig is good) and see if that makes a difference. Remember to clear the cache after you have flashed them.
This might help getting back to revolutionary http://forum.xda-developers.com/showpost.php?p=26909973&postcount=13
Nonverbose said:
Try rolling back to revolutionary hboot and a GB radio (the one in my sig is good) and see if that makes a difference. Remember to clear the cache after you have flashed them.
This might help getting back to revolutionary http://forum.xda-developers.com/showpost.php?p=26909973&postcount=13
Click to expand...
Click to collapse
really for just wifi, I have to do that much???
mohitgalaxy3 said:
really for just wifi, I have to do that much???
Click to expand...
Click to collapse
2 things? No you don't have to do it, and as I don't have the issue I cant even say that it will work. There's always other options...
Good day,
I know…I know… it’s September, I’m probably the last one who decide to try ICS on my Bell Raider/Vivid…
And I’m S-OFF (JuopunutBear), WCX, HBOOT- 1.85.2121….and I only get Boot Loop after every ROM I try….
I wipe everything, Data/ Case, Dalvik…everything before each install…
I flash the kernel for each rom before and after with fastboot….
I have tried also other Kernels ….
HTC Logo,.. and after that the animation of the respective ROM….turn OFF and starts over again…
So far I have tried :
-Blitz_2.35.0a
-Dark Raider_v1.5.5.
-HOlICS_1.3_official_en_release
-OTA_HOLIDAY_ICS_35_S_BM_3.38.666.2-1.65.666.3_release_255932wpop8vtj8tts3ou3-1
-Pegasus_2.5.0a
-RaidCity v1.3.0 Plus FinalX ICS Sense 3.6 based on SKT 3.42 for HTC Holiday by ChunD.K – XDA
-Stock HK ICS Sense 3.6 - deodexed rooted zipaligned
-Stock_ATT_ICS
Boot Loop every time…..
If it’s S-OFF (JuopunutBear), WCX, HBOOT- 1.85.2121 can I try RELOCK, and try an RUU Rom ?
Is that even an option ?
Any Advice is really appreciated.:crying:
If you can still get into the recovery then I wouldn't think you would need to run the ruu , but if you can only get into hboot then try to reflash a different recovery if that don't then if that won't work run the ruu to get ya back to a working phone and start over , in order to run the ruu you will need to relock the bootloader , I suggest using the toolkit it makes life much easier.
---------- Post added at 10:04 AM ---------- Previous post was at 10:02 AM ----------
Just seen you knew to relock sorry I just miss read .
No...
Don't RUU
Flash faux's kernel on the stock rom and try to boot...
Then flash what you want
Sent from my HTC Holiday using Tapatalk 2
If you dont have the official ics installed first, you cant install custom versions of ics.. http://forum.xda-developers.com/showthread.php?t=1612685 this should help if you were still on GB when you tried flashing those roms
use the unbricker in the development forum
XxSHaDoWxSLaYeRxX said:
use the unbricker in the development forum
Click to expand...
Click to collapse
Thats for devices returning to s-on and he isnt bricked, just bootlooping because it sounds like he is on gingerbread when he says "I’m probably the last one who decide to try ICS on my Bell Raider/Vivid…"
Note: This will fix only devices which were bricked by turning S ON. And bricks caused by a damaged hboot via interrupted OTA update/RUU flash on a S-ON device. Any devices bricked with other ways are currently *not* supported. We are working on it
Click to expand...
Click to collapse
:crying:
jenkem110 said:
Thats for devices returning to s-on and he isnt bricked, just bootlooping because it sounds like he is on gingerbread when he says "I’m probably the last one who decide to try ICS on my Bell Raider/Vivid…"
Click to expand...
Click to collapse
I’m not bricked,
I have an NAND backup, and I’m able to perform an NAND Restore.
I ‘m just frustrated over Boot Loop after each Rom update…
I appreciate any advice…
:crying:
reexon said:
:crying:
I’m not bricked,
I have an NAND backup, and I’m able to perform an NAND Restore.
I ‘m just frustrated over Boot Loop after each Rom update…
I appreciate any advice…
:crying:
Click to expand...
Click to collapse
Did you look at my first post here?
jenkem110 said:
Did you look at my first post here?
Click to expand...
Click to collapse
I’m Doing it right now….
Thanks and I will keep you posted if works…
jenkem110 said:
Thats for devices returning to s-on and he isnt bricked, just bootlooping because it sounds like he is on gingerbread when he says "I’m probably the last one who decide to try ICS on my Bell Raider/Vivid…"
Click to expand...
Click to collapse
Nice catch by the way, just wanted to trow props
Op. Just let us know what happens and if ya need any more help there's many here that are smart and willing to help out.
Boot Loop
jenkem110 said:
Did you look at my first post here?
Click to expand...
Click to collapse
Yes I just did all those steps…no issue….still I’m in BOOT LOOP after each ROM install…
I have tried so far two roms :
RaidCity v1.3.0 Plus FinalX ICS Sense 3.6 based on SKT 3.42 for HTC Holiday by ChunD.K – XDA
DarkRaider_v1.5.5
Still Boot Loop : Htc Logo….Dark Raider or Android logo ( ROM specific animation )…..screen black…REBOOT….
I did Wipe before ROM install…every time….
Any other ideas ?
Did the ics update go successful ? Via ruu install ?
Bigtjmc said:
Did the ics update go successful ? Via ruu install ?
Click to expand...
Click to collapse
Yes,
I installed first : -RUU_Holiday_Cingular_US_1.63.502.4_Radio_1.11.1020.03_30.77.551061.02L_release_221238_signeds
After that :
htc_vivid_att_RUU_3.26.502.56_US – and this one freezed on me while I was talking ?!?!....
I could not set up the APN ( for Fido Canada)….
Now I’m installing RUU_HOLIDAY_ICS_35_S_Rogers_WWE_3.43.631.2_Radio_3.05.4740.21_34.30.701040.22_release_264282_signed….
I will keep you posted....
K I will stick around for a bit and wait on ya
Bigtjmc said:
K I will stick around for a bit and wait on ya
Click to expand...
Click to collapse
Thanks for waiting for me…
Yes I can install via RUU….I’m running:
RUU_HOLIDAY_ICS_35_S_Rogers_WWE_3.43.631.2_Radio_3.05.4740.21_34.30.701040.22_release_264282_signed…
I need my phone at work this week…so I guess I will stick with this ROM for now…
Thanks again
Cool deal.
Maybe get that tool kit to lock and unlock incase it happens next time ,
and maybe try a different recovery just to see if it will flash better for ya seems like these phones vary a little what may work best for some may not for others I've found .
Ok I very recently had the exact same phone to work on for a friend and had the same thing happen to me. I got it figured out too so here's what I did..and what I'd been missing all along.
Unlock ur bootloader at htcdev.com and if you haven't yet s-off'd your phone head over to unlimited.io and follow the guide for the raider.
Next install a custom recovery, and then the rom:
Use the dark raider installer for this. I use wcxrecovery but any should work..cwm, twrp..I've tried them all..
Install the rom, full wipe, choose your preferred setup, and when you get to kernel choices, install the stock one. It's an unsecured boot image, which I learned is necessary to flash before u can flash other kernels...it should be that simple. Then you let the phone boot once, wait for it to load, reboot to recovery and reflash your Rom of choice. I just reflashed dark raider and used the default kernel and set max CPU all the way up..lol..much faster. I like the desensed version the best so far.
Let me know if u get it.. flash that stock kernel first. Then reboot load up and flash a custom rom entirely. Make sure you're s-off tho. It really makes it simpler to flash roms.
Sent from my HTC PH39100 using xda premium
---------- Post added at 11:40 PM ---------- Previous post was at 11:37 PM ----------
Also..try and download the Bell ics ruu, if u can't find it I have it.. maybe I could be nice and put it up somewhere for you and anyone else in need. I had a hard time downloading it..stupid file hosting sites and their speed caps...
Sent from my HTC PH39100 using xda premium
I have unlocked the bootloader, I’m S-OFF, I have tried WCX and CWM….
Every time I have Wiped Everything…..I have installed the specific ROM kernel….Before and After …with fastboot….
Every time – Boot Loop…..
I have tried Dark Raider, with Stock kernel…The same BOOT LOOP…..:crying:
reexon said:
I have unlocked the bootloader, I’m S-OFF, I have tried WCX and CWM….
Every time I have Wiped Everything…..I have installed the specific ROM kernel….Before and After …with fastboot….
Every time – Boot Loop…..
I have tried Dark Raider, with Stock kernel…The same BOOT LOOP…..:crying:
Click to expand...
Click to collapse
Wipe
Flash Rom
Flash kernel (via recovery)
Reboot
If that doesn't work * PM ME *
My advice would.be to restore it to stock and try to sell it for a newer phone or atleast one with more of a developer backing. I rarely see any kind of action here Rom-wise.
Sent from my HTC PH39100 using xda app-developers app
I Flashed Explos!on rom from the stock shipped rom, and then it basically ruined my phone! it turned it off and then it only boots into recovery, and now i cant flash any other rom apart from Einsteins untouched rom which has sense which i hate! i try flashing other roms but after 10 minutes i still on htc screen with red writing! someone help me flash the Explos!on rom right now! I Hate Sense!
Unlocked bootloader with htc dev
S-ON
HBOOT 1.31
HELP ME PLEASE!!
penguin449 said:
I Flashed Explos!on rom from the stock shipped rom, and then it basically ruined my phone! it turned it off and then it only boots into recovery, and now i cant flash any other rom apart from Einsteins untouched rom which has sense which i hate! i try flashing other roms but after 10 minutes i still on htc screen with red writing! someone help me flash the Explos!on rom right now! I Hate Sense!
Unlocked bootloader with htc dev
S-ON
HBOOT 1.31
HELP ME PLEASE!!
Click to expand...
Click to collapse
I am having difficulty myself finding a rom that actually works with this phone. So far, I have had to settle with Untouched ROM, and I have flashed an overclocked RAM kernel. Had some force closes for a while, but grabbed a tweaker and lowered the RAM speed, so I'm good now. My advice is to stick with what is stable first, and then add apks and tweaks and other customizations to bring it to where you would like it.
First, can you state your recovery, is it stock or custom (like ClockworkMod).
This Explos!on ROM... are you sure this is compatible with the Desire C?
I would suggest Nameless Rom [LINK] but since you hate Sense so much :crying: I would consider CyanogenMod [Link], google it for more info.
I would flash CWM if you don't have it yet if I were you, g'luck mate :good:
Majellico said:
First, can you state your recovery, is it stock or custom (like ClockworkMod).
This Explos!on ROM... are you sure this is compatible with the Desire C?
I would suggest Nameless Rom [LINK] but since you hate Sense so much :crying: I would consider CyanogenMod [Link], google it for more info.
I would flash CWM if you don't have it yet if I were you, g'luck mate :good:
Click to expand...
Click to collapse
Im using cwm recovery yes, but i cant even find an oc kernel or whatever it, everytime i flash a new boot.img i just bootloop..
Ok, to clarify.
It does not matter if you use nameless rom and hate sense, you can remove sense using nikhils customiser
There is no cyanogenmod for our phone yet
you dont seem to really get ROMing, Majellico, explosion rom was built for desire c and works with no other phone
because every rom has to be built for a phone specifically.
Now for flashing explosion (though i recommend nameless)
First, you do a full system wipe in the recovery
then you delete cache and dalvik cache
choose "apply zip from sdcard"
choose the rom .zip-file
it should now flash.
now for flashing the boot.img,
boot into bootloader, choose fastboot and connect your usb cable
go to the folder where you have extracted boot.img of your choice (you will have to see if the 767OC or 806OC work, if it doesnt just repeat these steps with the other bootimg.)
hold shift and right-click, choose "open commandprompt here" or something like that (my pc is configured in dutch i dont know what that options called in english)
type: "fastboot flash boot boot.img", without the quotation marks
now reboot your phone
Phenziox said:
Ok, to clarify.
It does not matter if you use nameless rom and hate sense, you can remove sense using nikhils customiser
There is no cyanogenmod for our phone yet
you dont seem to really get ROMing, Majellico, explosion rom was built for desire c and works with no other phone
because every rom has to be built for a phone specifically.
Now for flashing explosion (though i recommend nameless)
First, you do a full system wipe in the recovery
then you delete cache and dalvik cache
choose "apply zip from sdcard"
choose the rom .zip-file
it should now flash.
now for flashing the boot.img,
boot into bootloader, choose fastboot and connect your usb cable
go to the folder where you have extracted boot.img of your choice (you will have to see if the 767OC or 806OC work, if it doesnt just repeat these steps with the other bootimg.)
hold shift and right-click, choose "open commandprompt here" or something like that (my pc is configured in dutch i dont know what that options called in english)
type: "fastboot flash boot boot.img", without the quotation marks
now reboot your phone
Click to expand...
Click to collapse
First of all i understand ROMing on other phones very well, but i follow thoseexat stepsand i just get recovery bootloop again..
Phenziox said:
Ok, to clarify.
It does not matter if you use nameless rom and hate sense, you can remove sense using nikhils customiser
There is no cyanogenmod for our phone yet
you dont seem to really get ROMing, Majellico, explosion rom was built for desire c and works with no other phone
because every rom has to be built for a phone specifically.
Click to expand...
Click to collapse
Sorry for the misunderstanding for the Explosion ROM, I heard of it only in this forum and am researching it. There is actually a CyanogenMod for the Desire C (just very buggy, no WiFi so useless), thank you for that other information as well.
---------- Post added at 05:13 PM ---------- Previous post was at 05:07 PM ----------
May I ask where you got you're version of CWM?
Yeah i know about the cyanogenmod, just thought talking about that would cause our penguin friend to flash it and then start a thread : why isn't WiFi working?
I got cwm using the all in one rootkit by hasoon2000
Sent from my HTC Desire C using xda app-developers app
, I'm not stupid, I'm aware of WiFi and I know how to Rom.. I've been romming and jailbreakibg since I was 11, this is the first phone I've had a problem with.
Sent from my HTC Desire C using xda app-developers app
Seems legit, you are an experienced modder and don't know how to install a 3rd party launcher?
Cheers
Sent from my HTC Desire C using xda app-developers app
hey penguin449, post with your problem here: http://forum.xda-developers.com/showthread.php?t=1947613
maybe someone will be able to help.
Thread Closed
A requested by OP
flash boot.img
penguin449 said:
I Flashed Explos!on rom from the stock shipped rom, and then it basically ruined my phone! it turned it off and then it only boots into recovery, and now i cant flash any other rom apart from Einsteins untouched rom which has sense which i hate! i try flashing other roms but after 10 minutes i still on htc screen with red writing! someone help me flash the Explos!on rom right now! I Hate Sense!
Unlocked bootloader with htc dev
S-ON
HBOOT 1.31
HELP ME PLEASE!!
Click to expand...
Click to collapse
try to flash the boot.img who's inside of the zip file, it should work
mareeck said:
try to flash the boot.img who's inside of the zip file, it should work
Click to expand...
Click to collapse
Why are you posting? The problem is resolved and the thread is "Closed".
Clearly not. Apparently, OGM was firing blanks on this one.
sorry
me4488 said:
Why are you posting? The problem is resolved and the thread is "Closed".
Click to expand...
Click to collapse
sorry i'm new on xda and i don't know all the stuffs out here....
mareeck said:
sorry i'm new on xda and i don't know all the stuffs out here....
Click to expand...
Click to collapse
Isnt this enough to tell you that its solved? Its actually common sense to be honest.
2nd July 2013, 08:02 PM
Thread Closed
A requested by OP
Click to expand...
Click to collapse
Hi guys.
I'm attempting to flash the ElementalX-m7-5.2 on my phone which is currently running ARHD 21.0 Sense 5. My base is 3.17.xxx therefore I think everything should be fine. I just wondering what my Kernel version should read after I finish flashing it. From what I can see, it kernel hasn't been successfully flashed. Are there any prerequisites that I have to fulfill before flashing a custom rom?
Cheers.
s3330987 said:
Hi guys.
I'm attempting to flash the ElementalX-m7-5.2 on my phone which is currently running ARHD 21.0 Sense 5. My base is 3.17.xxx therefore I think everything should be fine. I just wondering what my Kernel version should read after I finish flashing it. From what I can see, it kernel hasn't been successfully flashed. Are there any prerequisites that I have to fulfill before flashing a custom rom?
Cheers.
Click to expand...
Click to collapse
Why not?
What's the error? You get it in recovery when you flashed?
Or are you talking about what you can see into settings?
Guich said:
Why not?
What's the error? You get it in recovery when you flashed?
Or are you talking about what you can see into settings?
Click to expand...
Click to collapse
Well it's beyond me really. Well, I have to get into recovery to flash it, so yeah.
Flashing seems to work as there is no error. I restart it twice, just as it requires. I go into my system info to check my kernel version, but nothing seems to have changed. Note, I've attempted to flash this twice now. Maybe, I'll just have to keep trying.
s3330987 said:
Well it's beyond me really. Well, I have to get into recovery to flash it, so yeah.
Flashing seems to work as there is no error. I restart it twice, just as it requires. I go into my system info to check my kernel version, but nothing seems to have changed. Note, I've attempted to flash this twice now. Maybe, I'll just have to keep trying.
Click to expand...
Click to collapse
ElementalX is "[email protected]" under kernel. If it shows that, then you're good.
Sent from my HTC One using xda app-developers app
ilal2ielli said:
ElementalX is "[email protected]" under kernel. If it shows that, then you're good.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Ahhhhh. Super! I guess it worked then. Brilliant. :good: