Database Develop

[Q] How To for the Galaxy Note GT-N7000

Hello,
I am new to the XDAdevelopers forum and don't have much knowledge of rooting or installing customs roms to Android phones.
I currently own the Galaxy Note GT-N7000 and just looking around some videos I would love to have some customs rom installed on my phone, such as the new Jelly Bean roms that are out now.
I would love to know on how to root my Galaxy Note if there is a Noob Tutorial for rooting the galaxy note and maybe a Noob Tutorial on how to install Jelly Bean rom that is currently out (any suggestion on which rom would be great)
As I said I am a noob and don't have much knowledge on how to mod your android phones and any help would be greatly appreciated
FYI: Looked around the forums for the while, I couldn't find anything simple enough, I bet there is somewhere in the forum, not sure if I was looking correctly >.<

Here is a guide to root your phone
http://forum.xda-developers.com/showthread.php?t=1329360
After you root your phone,flash a safe kernel like hydracore or speedmod kernel and then flash any jb rom
Jellycore and paranoid android are two jb roms that i feel the best

rajsekhar.300 said:
Here is a guide to root your phone
http://forum.xda-developers.com/showthread.php?t=1329360
After you root your phone,flash a safe kernel like hydracore or speedmod kernel and then flash any jb rom
Jellycore and paranoid android are two jb roms that i feel the best
Click to expand...
Click to collapse
Thanks for replying do you have any links to the Kernals and JB roms ? and if there is any tutorial for them too
Thanks again for your time.

Hydracore
forum.xda-developers.com/showthread.php?t=1749863
Jellycore rom
forum.xda-developers.com/showthread.php?t=1872921

rajsekhar.300 said:
Hydracore
forum.xda-developers.com/showthread.php?t=1749863
Jellycore rom
forum.xda-developers.com/showthread.php?t=1872921
Click to expand...
Click to collapse
Does my version of Android Matter for these upgrades ?
I have
Android Version: 4.0.3
Baseband Version: N7000XXLPT

Georific said:
Does my version of Android Matter for these upgrades ?
I have
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Click to expand...
Click to collapse
No problem with your version, they works for all 4.0.X roms. here is complete guide for flashing.

jeetu1981 said:
No problem with your version, they works for all 4.0.X roms. here is complete guide for flashing.
Click to expand...
Click to collapse
Thank you so god damn much for the HELP! this is exactly what I needed one problem though it says I need MobileOdenPro :/ I really can't purchase apps of the market is that a problem ? for the Kernel

No.After you flash the kernel,you can install jb rom through cwm

Georific said:
Thank you so god damn much for the HELP! this is exactly what I needed one problem though it says I need MobileOdenPro :/ I really can't purchase apps of the market is that a problem ? for the Kernel
Click to expand...
Click to collapse
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.

jeetu1981 said:
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
Click to expand...
Click to collapse
Do I need any add any other roms to my phone before I put a Jelly Bean rom onto my phone ?

Georific said:
Do I need any add any other roms to my phone before I put a Jelly Bean rom onto my phone ?
Click to expand...
Click to collapse
As long as you are on any safe kernel you can flash any JB rom, no matter if you are on any TW ICS, GB or CM9/10 roms. I am on CM10 right now and flashed it directly on stock LRQ ICS with Speedmod kernel.

jeetu1981 said:
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
Click to expand...
Click to collapse
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?

Georific said:
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Click to expand...
Click to collapse
yes, it needs some files to be downloaded manually, mobile odin pro downloads them automatically. Why don't you use K-tools, its free and very easy to use. i flashed Speedmod last time using k-tools only.

Georific said:
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Click to expand...
Click to collapse
You can find those additional files in the same link
Scroll down few posts and you can find it

jeetu1981 said:
yes, it needs some files to be downloaded manually, mobile odin pro downloads them automatically. Why don't you use K-tools, its free and very easy to use. i flashed Speedmod last time using k-tools only.
Click to expand...
Click to collapse
I got it to work for Odin I added the Kernal Hydra do I just press Flash Firmware ? Please REply ASAP

rajsekhar.300 said:
You can find those additional files in the same link
Scroll down few posts and you can find it
Click to expand...
Click to collapse
I managed to get Odin working I added the kernel Hydra do i just go to the bottom and click Flash Firmware ?

Georific said:
I managed to get Odin working I added the kernel Hydra do i just go to the bottom and click Flash Firmware ?
Click to expand...
Click to collapse
Yes, select kernel (.tar or zimage format) in kernel field and then hit flash firmware. make sure to check if the kernel is flashed after restart before doing any wipes and all

bad or good...
jeetu1981 said:
Yes, select kernel (.tar or zimage format) in kernel field and then hit flash firmware. make sure to check if the kernel is flashed after restart before doing any wipes and all
Click to expand...
Click to collapse
I followed every step on the link you gave me on how to get jellybeanitwas sucessful when installed it bootup but its been in the boot upscreen for a while it just says cyanogen mod. Like 20 min boot up or more is this bad.... help!!!!

Georific said:
I followed every step on the link you gave me on how to get jellybeanitwas sucessful when installed it bootup but its been in the boot upscreen for a while it just says cyanogen mod. Like 20 min boot up or more is this bad.... help!!!!
Click to expand...
Click to collapse
boot in cwm recovery and do a full wipe, this should solve the problem or else reflash the JB rom.

its works
jeetu1981 said:
boot in cwm recovery and do a full wipe, this should solve the problem or else reflash the JB rom.
Click to expand...
Click to collapse
The full wipe worked thanks so much man appreciate it for everything

[Q] Video lag and freeze

Hello .. i have a problem ..
My mobile on JB 4.1.2 official but playing videos hang and freeze the device why is that with dual-core processor
*1* I use MXPlayer and tried MoboPlayer too .. both hang !!
*2* when I bought it at first run it updated itself to JB 4.1.2 and after done ... some crash at Gapps .. I Deleted cache and updated them and now all fine...
anything wrong with me !!
Thanks in advance.​

It's a problem depending on the firmware that you use
For example, while this doesn't happen on lpd, on lqg is annoying
Even though I'm not a super fan of cocore, I have to agree that, when you install cocore, independent of the firmware you're using this lag will stop
Or go to cm10.1...

So if its firmware error .. CoCore need time to understand it .. I'm new here with S advance and its devs. so I have to wait for other solution

ZaXpired said:
So if its firmware error .. CoCore need time to understand it .. I'm new here with S advance and its devs. so I have to wait for other solution
Click to expand...
Click to collapse
Cocafe's kernel fixes this problem completely
But can have reboots
But, the last nightly is awesome!

Shiningb said:
Cocafe's kernel fixes this problem completely
But can have reboots
But, the last nightly is awesome!
Click to expand...
Click to collapse
So if i installed custom rom will fix this problem ?​

ZaXpired said:
So if i installed custom rom will fix this problem ?​
Click to expand...
Click to collapse
Yeah, you can install custom rom too
You can also stay on the same firmware, root, then follow the install procedures (install universal kernel flasher on playstore and etc)

Shiningb said:
Yeah, you can install custom rom too
You can also stay on the same firmware, root, then follow the install procedures (install universal kernel flasher on playstore and etc)
Click to expand...
Click to collapse
I tried to read CoCore topic but i did not understand anything ​

so you must read it once again
Sent from GT-P1000 using Tapatalk4

ZaXpired said:
I tried to read CoCore topic but i did not understand anything ​
Click to expand...
Click to collapse
Try to read it again dude
Install universal kernel flasher from play store
Download any of the cocore kernel (if you're I9070p then its cocore ep) (recommended latest nightly v7.6)
Extract the md5 file and flash it using universal kernel flasher

Root your Phone install universal kernelflash. Download cocore v7.x zipfile.Unzip it to a dir. Load the md5 file from the zip into kernelflasher, and flash then reboot
Sent from my GT-I9070 using xda app-developers app

Thanks Guys for replies

How to install Recovery (CWM / TWRP) ??

Doesn't find any source.
Thanks

williamlaw said:
Doesn't find any source.
Thanks
Click to expand...
Click to collapse
JB or GB? This is temporary CWM for JB http://forum.xda-developers.com/showthread.php?t=1987313. If you want permanent CWM,you must flash CoCore kernel.

phyowaiummg said:
JB or GB? This is temporary CWM for JB http://forum.xda-developers.com/showthread.php?t=1987313. If you want permanent CWM,you must flash CoCore kernel.
Click to expand...
Click to collapse
CWM / TWRP will be flashed after flashed CoCo Kernel ??

'Cocore' ..and YES!

williamlaw said:
CWM / TWRP will be flashed after flashed CoCo Kernel ??
Click to expand...
Click to collapse
Yes,CoCore kernel has built in CWM or TWRP. Only for JB.
Sent from my GT-I9070 using xda premium

phyowaiummg said:
Yes,CoCore kernel has built in CWM or TWRP. Only for JB.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Thanks man !

Is CoCore kernel compatible with Android v4.3? I'm on v4.1.2 & planning to upgrade to Android v4.3, but need to find ways to do a Nandroid & be able to run recovery if the upgrade fail or causes a lot of FCs. TQ.

xbean said:
Is CoCore kernel compatible with Android v4.3? I'm on v4.1.2 & planning to upgrade to Android v4.3, but need to find ways to do a Nandroid & be able to run recovery if the upgrade fail or causes a lot of FCs. TQ.
Click to expand...
Click to collapse
We have CM 10.2 based ROMs with that version of Android. And those ROMs has its own kernel that has features of CoCore and ofcourse CWM recovery (except OMNI ROM that has TWRP). And those ROMs you can install without CWM/TWRP, you will have it after installation.
And if you want to go back from CM10.2+ ROM you need to flash stock or to repartition /preload partition - http://forum.xda-developers.com/showthread.php?t=2612540

Unable to Install Permanent CWM or TWRP on Galaxy S Advance I9070
Hello All.. M new on xda.. I m using Galaxy S Advance (DDULP8) I9070 Rooted..I want to update my mobile to 4.4.2 from 4.1.2. I tried hard to install permanent CWM / TWRP on my galaxy s advance. But unable to install :crying:. So provide me the easy way to install CWM / TWRP on my mobile.
I only can install Temporary CWM. Plz tell me that can i update my Galaxy S advance (ddulp8) to CM 11 thru Temporay CWM..Or plz provide me Step by step easy method to install permanent CWM / TWRP...Thnx in Advance

sandeep0229 said:
Hello All.. M new on xda.. I m using Galaxy S Advance (DDULP8) I9070 Rooted..I want to update my mobile to 4.4.2 from 4.1.2. I tried hard to install permanent CWM / TWRP on my galaxy s advance. But unable to install :crying:. So provide me the easy way to install CWM / TWRP on my mobile.
I only can install Temporary CWM. Plz tell me that can i update my Galaxy S advance (ddulp8) to CM 11 thru Temporay CWM..Or plz provide me Step by step easy method to install permanent CWM / TWRP...Thnx in Advance
Click to expand...
Click to collapse
Flash cocore kernel using frapeti's tool. And you get a permanent recovery. Then flash cm 11 and gapps for 4.4.2

method
szzlgupta said:
Flash cocore kernel using frapeti's tool. And you get a permanent recovery. Then flash cm 11 and gapps for 4.4.2
Click to expand...
Click to collapse
Plz provide the link also..m really thanksfull to you..

sandeep0229 said:
Plz provide the link also..m really thanksfull to you..
Click to expand...
Click to collapse
Universal kernel flash tool
[Kernel][Feb 16] CoCore-E 9.0
CM11 ROM from Team Canjica - WIP
GApps for CM11/KK

link
szzlgupta said:
Flash cocore kernel using frapeti's tool. And you get a permanent recovery. Then flash cm 11 and gapps for 4.4.2
Click to expand...
Click to collapse
Dear Sir,
Plz provide me the link of cocore kernel for rooted galaxy s advance 4.1.2 (ddulp8). Thnx in advance

sandeep0229 said:
Dear Sir,
Plz provide me the link of cocore kernel for rooted galaxy s advance 4.1.2 (ddulp8). Thnx in advance
Click to expand...
Click to collapse
I've just put the necessary links in the post above. Have you read it?

which one
R_a_z_v_a_n said:
Universal kernel flash tool
[Kernel][Feb 16] CoCore-E 9.0
CM11 ROM from Team Canjica - WIP
GApps for CM11/KK
Click to expand...
Click to collapse
Sir, I had open your link, but there are 3 type of version of cocore.
(CoCore-E-9.0-CWM.zip - [Click for QR Code] (8.57 MB, 593 views)
File Type: zip CoCore-E-9.0-CWM-Touch.zip - [Click for QR Code] (8.70 MB, 302 views)
File Type: zip CoCore-E-9.0-TWRP.zip - [Click for QR Code] (9.96 MB, 346 views)
which 1 i can download

sandeep0229 said:
Sir, I had open your link, but there are 3 type of version of cocore.
(CoCore-E-9.0-CWM.zip - [Click for QR Code] (8.57 MB, 593 views)
File Type: zip CoCore-E-9.0-CWM-Touch.zip - [Click for QR Code] (8.70 MB, 302 views)
File Type: zip CoCore-E-9.0-TWRP.zip - [Click for QR Code] (9.96 MB, 346 views)
which 1 i can download
Click to expand...
Click to collapse
You can download any. First is the normal cwm. Second is the cwm with touch and the third one is twrp recovery.

Bestest Custom Rom For Galaxy S Advance
szzlgupta said:
You can download any. First is the normal cwm. Second is the cwm with touch and the third one is twrp recovery.
Click to expand...
Click to collapse
@ szzlgupta & ALL :- Really Thnx 2 all of uh.. I successfully installed CWM & CM 11 on my Galaxy S Advance
Now 1 question more..Plz tell me which one is bestest rom for Galaxy S Advance m using CM11 (Maclaw) Version. Plz provide me step & Link of the bestest custom rom..Tnx in advance

sandeep0229 said:
@ szzlgupta & ALL :- Really Thnx 2 all of uh.. I successfully installed CWM & CM 11 on my Galaxy S Advance
Now 1 question more..Plz tell me which one is bestest rom for Galaxy S Advance m using CM11 (Maclaw) Version. Plz provide me step & Link of the bestest custom rom..Tnx in advance
Click to expand...
Click to collapse
Forum rules do not allow threads about best ROMs.
If you are happy with CM11, good. If not try the other ROMs and find out which is the best for you.

CM11 Hangs
rog_star said:
Forum rules do not allow threads about best ROMs.
If you are happy with CM11, good. If not try the other ROMs and find out which is the best for you.
Click to expand...
Click to collapse
Recently i had installed CM11 custom rom on my Galaxy S Advance. After installing my mobile hangs some time. Some time Gallery, youtube, music player works very slow. Now i want to revert back to stock firmware. Plz guide me how to restore my device to stock firmware. I have Last Stock firmware CWM Backup which i backup before updating to CM11 & Stock firmware zip file every thing. plz advice me which method is the best for revert back to stock firmware. Thnx in Advance

sandeep0229 said:
Recently i had installed CM11 custom rom on my Galaxy S Advance. After installing my mobile hangs some time. Some time Gallery, youtube, music player works very slow. Now i want to revert back to stock firmware. Plz guide me how to restore my device to stock firmware. I have Last Stock firmware CWM Backup which i backup before updating to CM11 & Stock firmware zip file every thing. plz advice me which method is the best for revert back to stock firmware. Thnx in Advance
Click to expand...
Click to collapse
Just flash Stock Rom with Odin. And then restore your Backup.

[Q] flashable zip file of stock rom ?

is there a way through which i can create zip file of my stock 2.3.6 rom for ace whuch i can flash through cwm
if anyone knows please help
thanks in advance

aditya rathee said:
is there a way through which i can create zip file of my stock 2.3.6 rom for ace whuch i can flash through cwm
if anyone knows please help
thanks in advance
Click to expand...
Click to collapse
It's a flashble STOCK rom just with kernel changed, journaling disabled and prerooted
It include all STOCK apps and files
http://forum.xda-developers.com/showthread.php?t=1534804

Viper The Ripper said:
It's a flashble STOCK rom just with kernel changed, journaling disabled and prerooted
It include all STOCK apps and files
http://forum.xda-developers.com/showthread.php?t=1534804
Click to expand...
Click to collapse
thanks for this sir i really needed this cos on win 8.1 odin is not recognizing my ace even with latest drivers

At Windows 8.1 your driver not install in download mode? Because same Problem. :banghead:
But my ace go only in download mode no Boot up or recovery.
Sent from my GT-I8190 using xda app-developers app

why can't take backup of my rom via cwmr?

My rom stock rom 4.1.2
Kernel is speed mod and the cwmr came along with it, while trying to take full backup to my rom and all desktop wigets, the operation fail, any help please?
The mane purpose to take the full backup is to reflash the rom whenever i do mistake al so i safe time to reinstall desktop widgets again.

subrban said:
My rom stock rom 4.1.2
Kernel is speed mod and the cwmr came along with it, while trying to take full backup to my rom and all desktop wigets, the operation fail, any help please?
The mane purpose to take the full backup is to reflash the rom whenever i do mistake al so i safe time to reinstall desktop widgets again.
Click to expand...
Click to collapse
use a recent version of CWM like Philz. Speedmod has an old CWM which doesnot support preload partition.

nokiamodeln91 said:
use a recent version of CWM like Philz. Speedmod has an old CWM which doesnot support preload partition.
Click to expand...
Click to collapse
Thanks, and i tryied to install latest cwm touch 6.0.3, but it wont to be installed !!

subrban said:
Thanks, and i tryied to install latest cwm touch 6.0.3, but it wont to be installed !!
Click to expand...
Click to collapse
Choose the one that matches your rom build number.

nokiamodeln91 said:
Choose the one that matches your rom build number.
Click to expand...
Click to collapse
there is only one version to GT-N7000 stock rom ?!

subrban said:
there is only one version to GT-N7000 stock rom ?!
Click to expand...
Click to collapse
No, there are many for many versions of the firmware. eg XXLSZ, XXLTA, DDLSC.....

nokiamodeln91 said:
No, there are many for many versions of the firmware. eg XXLSZ, XXLTA, DDLSC.....
Click to expand...
Click to collapse
if you can help me do so plese otherwise show me the web site mine is N7000XXLSO

Yo! And LSO? Is that a rom build?

nokiamodeln91 said:
Yo! And LSO? Is that a rom build?
Click to expand...
Click to collapse
Build number JZ054K.N7000JPLSB
Based version N7000XXLSO
I am using speed mod kernel and cwm along with that, if i change to philz no problem ?

No

nokiamodeln91 said:
No
Click to expand...
Click to collapse
Where is the link?

Link in Yo

nokiamodeln91 said:
Link in Yo
Click to expand...
Click to collapse
Many thanks nokiamodeln91