Hi Devs,
I was wondering if there is a way to modify the photowall live wallpaper and add your own pictures, I tried to look for a guide & modified app, however no luck.
Found 1 modified apk with batman pics but that didnt work.
Please let me know if anyone has been able to modify or is working on this.
Regards,
[email protected]
If at beginning of your title you put " (REQUEST) "then you might get better and faster answer.
Sent from my SGH-I897 using xda premium
Steps To Modify SGS3 Photowall Live Wallpaper
Hi All,
I had tried multiple roms and when used the Photowall Live Wallpaper, I could not point it to the photo gallery to use my own pics. The gallery would never open and I had to do with the default pics which came with the SGS3. (Not sure if anyone has faced this issue).
After playing around with the apk files I did find a way to use my own pics in the PhotoWall Live Wallpaper. I hope you would like this.
A: Uploading your pictures in the Photowall.apk file.
1. Select a maximum of 8 pictures that you wish to use in the Photowall and move them to a folder on your desktop.
2. Rename the 8 pictures as follows: g1p1.jpg / g1p2.jpg / g1p3.jpg / g1p4.jpg / g1p5.jpg / g1p6.jpg / g2p1.jpg / g2p2.jpg
3. Extract the Photowall.apk from ICS ROM onto a folder on your desktop. (I used RemICS v1.3, haven’t tried this is on any other ROM).
4. Open the apk file using winrar. (Do not extract, just open)…. Navigate to the PhotoWall.apk\res\raw folder.
5. You should be able to see the files as shown in the screenshot 1.jpg
6. Click on “Add” and navigate to the folder where you have stored the pictures (remember to rename them as mentioned in step 2).
7. Select the files and click “OK”. This will replace the original files in the Photowall.apk.
8. Once this is done, exit/close the apk file opened in winrar.
You can try installing this file directly by copying it to your phone, however that didn’t work on my phone.
B: Uploading your customized Photowall.apk file in your ROM. (Tested on RemICS v1.3).
1.Open the Rom that you wish to flash (I used RemICS UX v1.3) using winrar (do not extract)
2.Navigate to \data\app folder.
3.Click on “Add” and navigate to the folder where you have saved your customized Photowall.apk. (Make sure that the name is “Photowall.apk”).
4.This will replace the original Photowall.apk with your customized file.
5.Exit and save the zip file.
6.Use the new edited Rom and copy it to the root of your “Internal SD” card.
7.Reboot the phone to “Recovery” and flash the new Rom. (I did not lose my data & settings as I did not wipe cache partition or Data/Factory, however this may or may not work for you. To be on a safer side please backup your data and applications. I will not be responsible for any data loss or bricked devices while trying this procedure. Try at your own risk.).
You can watch the video on the link below (sorry for the poor quality)
http://www.youtube.com/watch?v=Yd2VCzvphu8&feature=youtu.be
Special thanks toTeam RemICS for the beautiful Rom.
If you liked my work, please use the thanks meter.
- Disclaimer -
This product/steps is/are free to use at your own risk. I take no
responsibility for any conflict, fault, data loss or damage caused by this procedure.
No warranties, implied or otherwise, are given if you agree to use this product.
No problems were found while testing this on my Samsung Captivate device. your experience may vary.
maqbulsayed said:
B: Uploading your customized Photowall.apk file in your ROM. (Tested on RemICS v1.3).
1.Open the Rom that you wish to flash (I used RemICS UX v1.3) using winrar (do not extract)
2.Navigate to \data\app folder.
3.Click on “Add” and navigate to the folder where you have saved your customized Photowall.apk. (Make sure that the name is “Photowall.apk”).
4.This will replace the original Photowall.apk with your customized file.
5.Exit and save the zip file.
6.Use the new edited Rom and copy it to the root of your “Internal SD” card.
7.Reboot the phone to “Recovery” and flash the new Rom.
Click to expand...
Click to collapse
I think you over complicated the install process by a bit...
Why not just use a file explorer with root permissions and place the new Photowall.apk back to /system/app where it actually belongs, reboot the phone and be done with it? (/system/app is where live wallpapers that come with the phone are located by default, not /data/app)
As you can see here on my GS3, two of the several live wallpapers (phase beam and photo wall) are in /system/app
And these are the proper permissions for the apk
I tried that, but that wont work..... that the reason i mentioned
" You can try installing this file directly by copying it to your phone, however that didn’t work on my phone. "
Unfortunately wht u menitioned didnt work for me...
correct me if I am wrong... did u mention SG3... for SG3, you dont need to modify the photowall.apk, if you go to the wallpaper settings you can select pics from your gallery..
maqbulsayed said:
I tried that, but that wont work..... that the reason i mentioned
" You can try installing this file directly by copying it to your phone, however that didn’t work on my phone. "
Unfortunately wht u menitioned didnt work for me...
correct me if I am wrong... did u mention SG3... for SG3, you dont need to modify the photowall.apk, if you go to the wallpaper settings you can select pics from your gallery..
Click to expand...
Click to collapse
Yes, I understand that on the SG3 you don't need to do this, but on a Captivate, I don't see why you wouldn't be able to place it in /system/app and still have it work.
Hi there.
The greatest thing about Android is that you can change just about every element of the U.I, and if all you want to do is change a few images it's as simple as copying and pasting, but this guide will teach you how to...
[*]Use ADB Commands
[*]Deodex
[*]Decompile
[*]Recompile
[*]Sign
[*]Zipalign
...in an easy to follow manner that will have you theming your own apks in no time. There are many many GUI programs which I'll link to below that automate the following process but experience has taught me that it's important to know the basic process for when those programs don't work, are no longer maintained or you just don't like them for whatever reason etc, and to be honest command line editing for me is just as quick, and I personally prefer the ability to have everything in one folder. So lets begin.
Some Requirements:
A Rooted Phone.
A BACKUP OF YOUR PHONE!
Java - Do this first if you don't have it installed already.
Notepad++ - An essential program for xml editing!
Photoshop or Gimp - You'll need one of these for image editing.
7-Zip or WinRar - Required for apk editing.
Patience. :silly:
Use Linux or a Mac? See the following threads for more information on using apktool on other Operating Systems...
[WIN/LINUX][Decompile/Compile] Quick Mod Tool 4.0 [decompile and compile with speed]
APK Manager for Mac OS X
[Linux][UTILITY][TOOL] APK Multi-Tool
[tutorial] decompiling,recompiling and signing in linux (27-01-2013)
How to install and use Apktool with Ubuntu
Quick Tips;
.apk files are applications on your Phone, but when they''re on your computer you can browse them exactly like you would a .zip file, so set your default zip program as the default program for handling apks which will makes things much easier when working with them.
Download themes for your Phone, for other Phones too even and compare the res folders and screen shots of the theme as that will give you a good idea of what image you need to look for when modding your own apks.
If all you want to do is change images then you don't even necessarily need to decompile, you can just drag and drop images in to an apk to replace a stock image so long as they have the same file name.
For more complex mods like changing text colors and layouts (.xml files) and editing .9 png images then you will have to decompile.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Most of us will have Java already installed, but if you don't then get it installed before doing anything else. To save you the time and hassle of figuring out what else you need to download etc I've made a zip for you to download which contains Apktool and ADB.
Download APKTool_CMD.zip to a location of your choice, preferably the C:\ drive which will give you a folder to work from. This is how mine currently looks...
Once your folder is setup, java and other tools installed, you're going to want to get any apks you want to theme off your Phone and there are numerous different ways to this, but we're going to use adb commands to pull files to your computer so we need to open a command prompt window in your Apktool folder. To do this simply hold the shift key then right click your mouse in the Apktool folder and select "open command window here", or just click on the included command prompt.bat.
I like to pull the whole system as soon as I'm rooted as it gives me a backup of stock files which I can then copy and deodex to be themed.
The command to pull your whole system is...
Code:
[B]adb pull /system/ Z1C_368[/B]
...you can choose something other than Z1C_368 as your folder name but it will create that folder in your Aktool folder. Alternatively you can just download individual folders, the commands are as follows...
Code:
[B]adb pull /system/app/ Z1C_368 app
adb pull /system/priv-app/ Z1C_368 priv-app
adb pull /system/framework/ Z1C_368 framework[/B]
...or pull individual files...
Code:
[B]adb pull /system/framework/framework-res.apk[/B]
...so now you should have a APKTool_CMD folder with another folder within it and at least your app, priv-app and framework folders in that, which we can use for the next step.
The tool I use is this - [Tool/Utility] JoelDroid Lollipop Batch Deodexer. While I will deodex all the files I've pulled to my computer experience and battery life has taught me to only deodex the apps I've themed on the phone, rather than run a fully deodexed ROM.
Before you can do anything else you need to install your framework-res.apk and SemcGenericUxpRes.apk/twframework.apk, which will put two apks at C:\Users\YourPCName\apktool\framework which are the resources apktool uses to work its magic. The two commands to install your two resource apks are...
Code:
apktool if framework-res.apk
apktool if SemcGenericUxpRes.apk
The command for decompiling is...
Code:
[B][U]apktool[/U] [U]d[/U][/B] framework-res.apk
...which will create a folder named like for like except for the .apk extension, and in this folder is where you'll find a couple of folders, the main one always being the res folder as it's in this folder that you'll find your images and xmls to edit. First glance of a decompiled res folder can be overwhelming, 596 folders in my frameworks, but we only need to focus on a handful in the majority of apks, and they are...
drawable
drawable-xhdpi-v4 (drawable-xxhdpi-v4 depending on your device)
layout
values
...you may need to delve into others sometimes but it's very rare that I've had to.
Once you've finished making your mods you need to recompile your apk using the following command...
Code:
[B][U]apktool[/U] [U]b[/U][/B] framework-res
...notice you only use the folder name here. If you get any errors here due to a bad edit apktool will usually tell you, in a roundabout way, you just need to read the code it throws up then retrace your steps, correct any bad edit and try again. If all goes smoothly you'll now have a new folder called dist, which contains your newly modified apk, but you can't use that just yet.
This is where 7-Zip or WinRar comes in to play. We need to extract from the original apk the Android.Manifest.xml and META-INF folder, into the dist folder, then from the new apk extract the resources.arsc also into the dist folder, then drag and drop all three files back into the new apk, but NOTE, it's important that you choose store as the compression method, any other will break the apk, and if you replace a broken framework-res.apk you will bootloop.
And signing is as simple as that. Alternatively you can use the following command...
Code:
[B]java -jar signapk.jar testkey.x509.pem testkey.pk8[/B] framework-res.apk.apk framework-resS.apk
...notice the extra "S", the output name has to differ from the input name otherwise it will give an error, if done right it will create a new apk called framework-resS.apk, just remember to rename it back to the original before using it on your Phone.
[TOOL] pySignare - Quickly Sign APKs [Windows]
Signing For The Play Store
If you plan on Publishing a Theme or any other app/apk to the Play Store then using the above method to sign your apks just wont work because you need to give it an individual signature that is unique to you, thankfully @AndroidGraphix has written a great guide that will show you how, it's a bit more fidgety than the above method but simple enough to follow...
AndroidGraphix said:
Click to expand...
Click to collapse
- Noobs guide to signing an APK with a Private Key
DISADVANTAGES OF UNALIGNED APKs
Quite understandably, situation would be reserved for unaligned application packages. Resource reading would be slow and memory usage would be on the higher end of the spectrum. It would also depend on how many unaligned applications are present. For example, if less number of applications with an unaligned home application, you’d see slower application launch times. This is the best case scenario. For a worst case scenario, having a number of unaligned applications will result in the system repeatedly starting and killing processes, struggling with lags and huge battery drain.
Click to expand...
Click to collapse
- SOURCE
Move your new signed apk into your APKTool_CMD folder, you can overwrite your original if you want, and use the following command...
Code:
[B][U]zipalign -v 4[/U][/B] framework-res.apk ZAframework-res.apk
...notice the ZA, zipaligning creates a new apk which has to be named different from the original, but use what you want, it'll need renaming again before you use it.
So now we need to transfer your apk back to your Phone, you can do it by copying to your SD, then to your system, change permissions, then copy to the right folder, but that's not only time consuming but highly tedious too, so a simpler method is to use adb using the push command as this allows us to push straight to the system overwriting the original with the correct permissions too. To use this method you'll need you'll need an unsecure kernel and/or Chainfires adbd Insecure app. Try the app first but if you still can't mount and push files read this thread - [HOW TO]Make your favorite kernel adbd insecure to run ADB as root on /system and try again.
Rename your zipaligned apk to it's original name, then we need to mount the system before we can push direct to the the system, and the command for that is...
Code:
adb remount
...then we need to make sure we're pushing our apk to the right folder on the Phone, so for the framework-res it's...
Code:
[B][U]adb push[/U][/B] D:\Xperia\Z1C_368\APKTOOL\framework-res.apk /system/framework
...yet for the SystemUI it's...
Code:
adb push D:\Xperia\Z1C_368\APKTOOL\SystemUI.apk[B][U] /system/priv-app/[/U][/B]SystemUI
...if it's any one of those two then generally you need to reboot, so just type...
Code:
adb reboot
...your Phone will restart and if you've done everything right your new mods should be displayed, happy days. So that's it for how to use command prompt for modifying apks.
So now you know how to prepare an apk for editing your going to want to theme it obviously, and the following links will help you with that.
XML 101 - XML Modding Made Easy!
How To Edit Resources
The Ultimate Android Themeing Guide
[GUIDE] Smali coding guide for beginners
[Reference] Interactive Phone Modification [GUIDE]
[TOOL] Android Drawable Resizer Tool
[GUIDE] Want to learn how to theme?
[Guide] demystifying build.prop [Valid entries]
General Questions about Themes GO HERE!!!!!
[INFO] Custom framework-res.apk resources.arsc using vendor overlays
[Tutorial][NICS Themer] Create Your Own Themed apk & Become a Themer
U.I Modding
Tutorial :- Changing App Icons
[TUTORIAL]How to Theme Your MMS
[How-to] Edit the "About Phone" display
[Tutorial][VIDEO] Add/integrate apps into Settings app!
[TUTORIAL] Where to find the colors for making a theme
[MOD][GUIDE]LockScreen Clock with seconds[ANY ROM]
[TUTORIAL] How to add various framework/Settings mods
[TUT][JB] HOW TO THEME SystemUI.apk for TOTALLY newbie!
[HOWTO] Integrating/Adding applications to the settings menu
[TUTORIAL][ICS][GB][JB]How to change Android's black background
[GUIDE][Ultimate]Theme Apps To Dark Theme | Theme Whole System | Newbies Here! 12/11
Text...
Text Color Guide
[GUIDE] Tips for themers
[GUIDE][REF]Changing System Text Settings
Statusbar...
[MOD][TUT] Merge The WiFi And Signal Icons
[GUIDE][MOD][SYSTEMUI] How to add 0.00KB/s meter on statusbar GB/ICS/JB
[TUT] How To Center The Clock On The Statusbar..And Move Other Icons As Well!
[How-To]Removing Battery Percentage, Adding Toggles,Battery Circles to Statusbar
[GUIDE][Mods][All Devices]How to add/ Change Clocks to Analog/ Digital with Seconds
The three best/most popular GUI programs are...
@Diamondbacks - Virtuous Ten Studio
@Ticklefishs - [TOOL] Tickle My Android
@BDFreaks - [Tool]Advanced ApkTool
...there are others but these are I what I tend to see referred to the most.
TIP:
Restoring modified files if you mess up is easier and quicker with a CWM.zip, especially if you're modifying any framework apks! Just because an apk might build with no errors doesn't mean it won't give you any when installed to the Phone.
I hope after reading this explanation you're left wondering what all the fuss is about, as it really is quite simple. I'll use the following two images, btn_default_pressed_holo.9 & status_bar_close_off.9 to illustrate the basic point of the borders...
Decompiled .9pngs:
Recompiled .9pngs:
Those borders control which part of the image is stretched (Left & Top) and where on the image content will be displayed (Right & Bottom). We'll use Draw 9-patch which is for editing the borders of decompiled .9pngs and lets you see how the image, when stretched, will be displayed on the Phone. Notice that the borders are different sizes, well that's because I only want/need a certain part of the image to stretch to get the desired look on the Phone.
...in the image below the left side shows the stretched image and desired effect should look on the Phone and the right side shows how it would look if I had edited the borders incorrectly or used none at all...
You can get away by not using a border but you would need to edit your image to specific dimensions to accommodate for the stretching, for example it might look fine for a simple OK button but it might not look right if you used the same .9png for a screen press which stretches the whole length of the screen, so you're better off just using them to begin with, plus you'll more than likely get errors down the line while decompiling or recompiling your apk.
The use of the border is made even more clear when you add text to an image. For my status_bar_close_off.9 I've filled all four sides of the image (except for an empty pixel in all four corners as that is the max amount of border you can use) as I need it to stretch the image just how I've edited it...
...but if I used the same sized left side border as the btn_default_pressed_holo.9 then this is how it would look on the Phone...
...which is obviously not the look I'm trying to achieve, as the left side border is causing the image to stretch incorrectly.
So that's basically it, depending on the image you're editing you can usually leave the borders alone but if you create one from scratch then you might need to play about with them if your images doesn't look quite right when used on the Phone. Here's a few links that will assist you further, especially the batch editing...
How to edit .9.pngs
[TUTO] Create your 9.png !
[UTILITY][TOOL] 9patchPngSuite [Windows&Linux]
How to draw NinePatch images with Photoshop - .9.PNG
[TOOL][Multi-Platform][.9.png][ALL DPIs] Android Resizer Tool
[Tutorial][Commentary] How To Batch Edit .9PNG/PNG Images
[tool] 9compiler - batch process for themers android
ClockworkMod Recovery zips are used for flashing individual files to whole ROMS and can be a life saver if you push a badly edited apk to your Phone that results in a bootloop. There's also a few programs that can assist you with that too, but if all you're doing is replacing a few files all you really need is a template, then it's just a matter of creating the Phones folder setup in the zip which is simply creating folders: system\app - system\media\audio etc then dragging and dropping your files into it. A basic understanding of the updater script is essential, a ROM.zip will more than likely wipe your Phone whereas a Theme.zip may just replace files but it might delete some also.[/QUOTE]
See below for a CWM.zip Template but first some helpful links...
[Tool]easy flasher v4 (ur own update.zip)
[Tool][Windows/Linux] Android Flashable Zip Creator
[Utility-Tool][DEVandThemers]CWMflashpack.zipCreatorV1{TheCollective}w/EdifyScripting
ERRORS encountered in CWM Recovery
[TUT] [for NOOB] editing updater-script for noobs!
[TUTORIAL] Making Flashable ZIPs, EDIFY Script, ZIP Signing & Key Creation
This is my Restore_zip which is set up so you can add your own files to the framework and apps folders in the main system location, but you can easily add other folders to it if you want to add things like fonts, tones or anything else, just remember to add folders within folders if that's where the files you want to include are such as tones, media\audio\alarms for example.
If you navigate to META-INF\com\google\android you will find the updater-script which controls how the zip works and the text you see when you run it in CWM. As this zip is just for basically over writing files you don't need to edit anything except for a few lines...
...this is how I've edited it for my theme...
...so just edit it using Notepad++ to your liking.
When adding files to your zip add them using Normal as the Compression Method...
...Remember to remove the text files I've added otherwise they will be flashed to your folders too.
And that's pretty much it, the only way you're really going to learn is by reading then putting into practice what you've read and picking stuff up along the way, fortunately there are numerous guides for numerous mods and tools to help with a variety of tasks.
Notable credits and thanks to @iBotPeaches and @Brut.all for making it possible with - Apktool
Useful Suff...
rovo89 said:
In this thread, I'm presenting a framework which gives you the possibility to modify your ROM - without modifying any APK (developers) or flashing (users)!
...
Advantages:
No need to modify any APKs. This means:
No need to decompile, change things in smali, compile, sign, ...
It will work for odexed and deodexed ROMs.
Your mod is not bound to a specific version of the ROM. Unless there is a major change in the methods called for a certain functionality, your mod will continue to work even when you upgrade your ROM. Hell, it will probably even work with different ROMs.
Multiple mods can be installed at the same time, even if they change the same package. So you can use these battery icons and those quick toggles. Even hooking the same method twice is possible. Of course, this only works properly if the mods are not trying to do incompatible things.
It does its magic at runtime. That means you can implement options to let the user decide if they prefer the bikeshed to be painted in red or blue. Or you can have some extra logic for certain ROMs without building different mod versions.
It can be disabled easily without having to reflash.
It's open source.
Click to expand...
Click to collapse
- [FRAMEWORK ONLY!] Xposed - ROM modding without modifying APKs
Annex1 said:
CM10.1-THEME_BOOK
Theme book was created by Annex and Ebs512. I've been asked alot of questions from how to get started? what do I need to get started? to What Graphics program do I use? etc. We made a real simple theme guide to help get you started. This is in Layman Terms.. Nothing fancy.
ONLY THING FANCY IS MY FLASH BOOK
YOU MUST HAVE A FLASH PLAYER INSTALLED TO VIEW THIS!!!
Click to expand...
Click to collapse
- [GUIDE] HOW TO THEME CM10.1 - Animated Book
[Guide] Porting XTheme themes
[How to] XMLGenerator.jar + batch script v2.0
[Guide] Xposed Framework/TabletUI (Noob-Friendly)
[Tool] Drawable XML generator for CM7 theme chooser
[Guide] How to port themes to T-Mobile Theme Chooser
[Tool] [Theme Creator] [CM/Avatar] Theme creator tool
[INDEX][WiP] List of APPs & MODs that use XPOSED Module
[Tool] nhnt11's XML Generator Revived V2+Extended UPDATED!
[DEV/GUIDE]Creating APKs for use with TMobile Theme engine
[Tool][PortCx] Port CM Themes to Xtheme Engine in One Click!
Theme-Porter [v1.0] [Any Firmware / Rom Compatible] [WINDOWS]
[GUIDE] T-mobile theme engine for the faint at heart (non-linux users)
[1/30/2013] Mega 4.2.1 BlackBean Theme Template [XXHDPI/XHDPI/HDPI/TVDPI]
[MOD][XPOSED][4.0+] XThemeEngine beta5 - Theme engine for any rooted phone
[APK][Xposed] ResXploit : Theming your android the easiest way! No decompiling APKs!
-·=»‡«=·-[JB][CM10] Theme Engine Template Updated To V4 [8-7-12][XHDPI/HDPI]-·=»‡«=·-
Hi Guys, I tried to do a small tweak to my ROM like just a color change to signal bars, as mentioned in the XDA university, but once the apk is pushed to system/app and restarted, it went to bootloop. I just changed the color of a image file using GIMP (as mentioned), then dint work, so just tried decompiling SystemUI.apk and then recompiling then folder without any changes and push to system folder, even that dint work, then i saw this thread, i tried the replacing the resources.arsc from old apk (opened using winrar, and dragged to my folder), the opened my new recompiled SystemUI.apk with winrar and added this resources.arsc file which i extracted with compression option as Store, then pushed it bcak to /system/app folder , every time i pushed i connected the phone in recovery mode. But still in bootloop, the moment i replace the apk with original one, it works, can some one pls point out what am I doing wrong ?
Hardware - I9100 - galaxy S2
ROM - JellyBAM 3.3
Kernel - Siyah 5.1+
thanks,
merin
merin_83 said:
Hi Guys, I tried to do a small tweak to my ROM like just a color change to signal bars, as mentioned in the XDA university, but once the apk is pushed to system/app and restarted, it went to bootloop. I just changed the color of a image file using GIMP (as mentioned), then dint work, so just tried decompiling SystemUI.apk and then recompiling then folder without any changes and push to system folder, even that dint work, then i saw this thread, i tried the replacing the resources.arsc from old apk (opened using winrar, and dragged to my folder), the opened my new recompiled SystemUI.apk with winrar and added this resources.arsc file which i extracted with compression option as Store, then pushed it bcak to /system/app folder , every time i pushed i connected the phone in recovery mode. But still in bootloop, the moment i replace the apk with original one, it works, can some one pls point out what am I doing wrong ?
Hardware - I9100 - galaxy S2
ROM - JellyBAM 3.3
Kernel - Siyah 5.1+
thanks,
merin
Click to expand...
Click to collapse
Hi There
Try using 7zip to update the apk instead of winrar. if that doesn't work, post your logcats,
Thanks
trevd said:
Hi There
Try using 7zip to update the apk instead of winrar. if that doesn't work, post your logcats,
Thanks
Click to expand...
Click to collapse
I will try that when i get back home today, and is there any option i need to set when using 7zip like store mode ?
thanks,
merin
hi, I tried with 7zip, 1st i just opened the recompiled zip with 7zip and dragged and dropped the resources file from original apk to this archive, and pushed to phone , still boot looping, and then tried to right click on the resource file from original apk, and selected add to 7zip archive, and changed the archive format to .zip/compression mode to Store and saved, then pushed to phone, still boot looping. So here i have attached the logcat, hope that is correct how i have done it, after rebooting the phone, i typed in consle logcat > log.txt and it was waiting for device, once in boot loop i did ctrl + c, then it exited. Please let me know if you need more info, do i need to attach my original SystemUI.apk and framework-res.apk ??
Happy New Year !!!
thanks,
merin
Nice tuts I will try at home :thumbup:
Sent from my ST18i using xda premium
merin_83 said:
then i saw this thread, i tried the replacing the resources.arsc from old apk (opened using winrar, and dragged to my folder), the opened my new recompiled SystemUI.apk with winrar and added this resources.arsc file which i extracted with compression option as Store, then pushed it bcak to /system/app folder , every time i pushed i connected the phone in recovery mode. But still in bootloop, the moment i replace the apk with original one, it works, can some one pls point out what am I doing wrong ?
Click to expand...
Click to collapse
Hi.
Are you copying the AndroidManifest.xml and META-INF folder from the original to the new apk too?
Actually i did the exact thing you said yesterday, when i found in the youtube, and it worked thank you!, but dint copy the resource file (but had some fc's when opening camera 1st time), may thats the reason,,, so i should copy AndroidManifest.xml and META-INF and resource file ?, and is this a standard procedure when we do a recompile every time ? or it varies with situation ?
thanks,
merin
Hey hi guys....can any 1 tell me how to set boot image which i want hmmmmm
Sent from my HTC Desire HD using xda app-developers app
merin_83 said:
so i should copy AndroidManifest.xml and META-INF and resource file ?, and is this a standard procedure when we do a recompile every time ? or it varies with situation ?
Click to expand...
Click to collapse
It's how I do it every time and never have an issue (unless I've screwed up somewhere), so yes.
sagar4all007 said:
Hey hi guys....can any 1 tell me how to set boot image which i want hmmmmm
Click to expand...
Click to collapse
oh okey thank you XperienceD, does it make a difference if we just use apktool or Androidsuite for decompiling and building ?
thanks,
merin
merin_83 said:
oh okey thank you XperienceD, does it make a difference if we just use apktool or Androidsuite for decompiling and building ?
thanks,
merin
Click to expand...
Click to collapse
I think androidsuite uses apktool for its decompiling and build it just uses it through a ui as apktool is command line so its more a preference of use for you
Sent from my GT-N7000 using XDA Premium HD app
ttibbetts83 said:
I think androidsuite uses apktool for its decompiling and build it just uses it through a ui as apktool is command line so its more a preference of use for you
Click to expand...
Click to collapse
What he said. I've set this up for when such programs don't always work.
How about some links for how to guide for Ubuntu user and some links on .XML file editing I was doing .apk mods on windows then started messing around with Ubuntu and find its I little more work to get it setup but all an all it to me is a better environment for android then windows IMOA
Sent from my GT-N7000 using XDA Premium HD app
ttibbetts83 said:
How about some links for how to guide for Ubuntu user
Click to expand...
Click to collapse
After a quick search for android theming ubuntu there doesn't seem to be a lot of information for it, and this post...
Nikkopt said:
What and where have you heard about Ubuntu helping on theming? It depends on personal taste and choice. You also have much more tools to help you graphically on windows and mac os.
Click to expand...
Click to collapse
from this thread - Which version of Ubuntu is recommended for theming? suggests why.
here are some links for ubuntu installs that will help with .apk modding on ubuntu for those who want it
how to setup apktool on ubuntu
http://my.opera.com/ubuntunerd1/blog/2012/08/20/how-to-apktool-with-ubuntu-under-construction
ubuntu version of paint.net
http://pinta-project.com/
xaraxtreme looks to be a good program from what i have read but i have not tryed it out yet
http://www.xaraxtreme.org/download.html
gimp is avalable through ubuntu software center and for .xml ubuntu has built in editer software just by right click and open with text editer
hex color website http://www.procato.com/rgbfind/
Nice guide my friend :good:
if anyone get apktool doesn't work on apk JB 4.2.2 ROM you can use this Latest apktool http://d-h.st/cze
Rizal Lovins said:
Nice guide my friend :good:
if anyone get apktool doesn't work on apk JB 4.2.2 ROM you can use this Latest apktool http://d-h.st/cze
Click to expand...
Click to collapse
Thanks Rizal.
Does anyone know how to enable USB Mass Storage on our phones under CM10.1? I've searched around and found this thread. But since I'm not familiar with changing build.prop I don't dare to do it myself. There are some CWM .zip files around to enable it, but they are on other phone's forums and I'm sure they just replace/change the build.prop so it's definitely not a good idea to flash those on a different phone than the ones they were intended for....
Long story short, does anyone know how to enable it on ours?
TIA!
Update on the process:
I was able to edit the build.prop according to the instructions, but that alone doesn't seem to do anything.
So I decided to try the next step, but where it tells me to do the changes below I wasn't sure what to do.
Thom75 said:
in framework-res.apk/res/xml/storage_list.xml
where oryginal line look like this:
Code:
<storage android:mountPoint="/storage/sdcard0" android:storageDescription="@string/storage_sd_card" android:primary="true" android:removable="true" android:maxFileSize="4096" />
after change look like this:
Code:
<storage android:mountPoint="/storage/sdcard0" android:storageDescription="@string/storage_sd_card" android:primary="true" android:removable="true" android:allowMassStorage="true" android:maxFileSize="4096" />
Click to expand...
Click to collapse
I was able to find the framework-res.apk file, copied to my computer and tried to open it with an XML editor... looked too complicated so I left it alone.
Does anyone know how to mess with that?
Open the .apk file with WinRar
-Drag the file you want to edit on your computer
-Edit the file on your computer
-Delete the old file in Winrar from the apk file
-Put the new file from your computer back in Winrar and save the "new" apk file
-Put the new .apk file on your smartphone
Before you install the new .apk file take a Root Explorer and look at the permissions of the old .apk file and set this permission on the new once...
I hope i could help you
Sivvis said:
Open the .apk file with WinRar
-Drag the file you want to edit on your computer
-Edit the file on your computer
-Delete the old file in Winrar from the apk file
-Put the new file from your computer back in Winrar and save the "new" apk file
-Put the new .apk file on your smartphone
Before you install the new .apk file take a Root Explorer and look at the permissions of the old .apk file and set this permission on the new once...
I hope i could help you
Click to expand...
Click to collapse
Thank you very much for your help! I didn't know apk files were just a compressed library of other files.
Now I am stuck trying to edit the "storage_list.xml" file... I tried to open with a few different xml editors, but could not get clean text like the example before. Any sugestions?
I attached the file below:
Apoena said:
Now I am stuck trying to edit the "storage_list.xml" file... I tried to open with a few different xml editors, but could not get clean text like the example before. Any sugestions?
Click to expand...
Click to collapse
Well, how about decompiling the .apk file with APK Tools instead of just opening it with WinRar? :laugh:
Yes, now I get a clean, editable, decompiled xml file.
I'll try editing both when I get home tonight and will post the results.
I guess this is a problem because of the emulated layout. There is a trick with setprop sys.usb.storage.config mass_storage but it does not work.
Keep me informed if you find something valuable (i'm on original CM10.1, latest nightly 0423 actualy).
Ok, here's the update from last night:
I started over since I flashed the nightly, which is good so I restarted with a clean slate.
- Edited build.prop - OK
- Copied framework-res.apk to my computer
- Decompiled framework-res.apk
- Edited storage_list.xml
- Recompiled framework-res.apk with new storage_list.xml
- Copied framework-res.apk back to my phone
- Deleted original framework-res.apk
- ...... instant restart & bootloop before I could paste the new framework-res.apk in its place
No big deal, just restored a nandroid backup I made before messing with anything and I'm back in business.
Apparently you can't mess with the framework-res.apk while your phone is on (with the OS running)... so now I need to research the right way to push/pull these files from ADB while on CWM recovery. I appreciate if someone could point me in the right direction since I'll be busy at work today.
To be honest, my gut feeling tells me that this is not going to work anyway. But look at what I learned so far... two days ago I wouldn't even think of compiling/decompiling anything... this is what XDA is all about, right?
Imho, the framework_res.apk and various tricks are all enabling or disabling a sys.usb.storage.config key. I'm not understanding nor finding informations about CM10.1 emulated layout, and if there are any reasons to forbid mass storage (because, yes, it seems it is disabled because it is not compatible).
This is something i have hard time with. On Android, you have tons of improvement for rom or kernel XY, but generally undocumented. If you apply this 'per device', the information is very fragmented and difficult to grab.
I was looking for a simple brief on base MTD partitions layout for LG P880, it seems the only way to have this is to dig KDZ files. Perhaps a Wiki would help the wannabe contributers like me to start ?
Any Solution For This Problem ??? I Can't Transfer Any Files To My O4X , What's The Point Of Cyanogenmod Then ??????????????
Nooby305 said:
Any Solution For This Problem ??? I Can't Transfer Any Files To My O4X , What's The Point Of Cyanogenmod Then ??????????????
Click to expand...
Click to collapse
Flash the latest nightly. MTP is working and you cab transfer files that way.
Sent from my tree using a ladder
effectively, if you are flashing for USM, you should stay on LG stock.
I know that the topic got a little old but I'd like to refresh it since more people (e.g. Ubuntu users) could be interested in enabling Mass Storage.
What I've done is:
1) pulled /system/framework/framework-res.apk
2) decompiled it with APKtool
3) added
Code:
android:allowMassStorage="true"
in storage_list.xml
4) builded a new apk
then I've rebooted my phone into recovery and (@Apoena you may be interested in it - there is a possibility to access /system through adb connected with phone in recovery mode) pushed the new framework-res.apk. I've also changed the entry in build.prop to
Code:
persist.sys.usb.config=mass_storage,adb
Everything seemed fine until I've tried to reboot the phone: instead of CM boot logo I got a black screen. Anybody has an idea what went wrong (maybe something during recompilation of the apk)?
And of course sorry for any language mistakes, I'm not a native speaker
Decided to start a new thread as this one was getting a bit messy (and I couldn't change the title anymore)
http://forum.xda-developers.com/galaxy-s6/themes-apps/mod-multi-dpi-samsung-apps-camera-t3141148
----------------------------------------------------------
Hi all, after changing the dpi to 480 the camera was the main thing bugging me. Looking for a solution I found this thread:
http://forum.xda-developers.com/galaxy-s6/themes-apps/mod-fix-samsung-camera-app-device-dpi-t3131995
But that did not work for me, so I decided to try it myself and I finally managed to create multi-dpi versions of the Camera and Samsung Keyboard apps. They are based on the apks from the XtreStoLite Universal Deo-Mod Edition 1.5 as I'm currently running that. So just give it a try (backup the original apks first! I usually just rename them to "filename.org") and let me know if it works for you. I tested on 480 and 520 dpi and that works here...
Installation:
1. Backup original apk (in system\app\SamsungCamera4 and/or systemm\app\SamsungIMEv2 )
2. Extract modded apk to the corresponding folder
3. Wipe data for the app
4. Reboot
I basically modified the dimens.xml file to hardcoded pixel sizes instead of dip value, modifying dip value caused other issues for me (camcorder not working, pro mode messing up). Hopefully it's of use to some.
I have not been able to fix the Contacts/Dialer (SecContacts_L.apk in the priv-app folder)! I either get a corrupt apk (parsing error) or it just won't show up in my apps. Corrupted apk gives a parsing error when trying to install manually, otherwise it just says 'install failed'.
I am guessing this is somethiong with the priv-app folder and other restrictions there. I also tried copying the apk to the system\app folder instead but that didn't work either...
If anyone has ANY idea how to fix this? (I tried with both apktool as apk multitool).
*SCRIPTS ADDED*
Added the scripts and all I've written for this to this post for those wanting to try themselves (dpi_mod.zip). They are not completely polished so need some manual editing every now and then...
Basically, doubleclicking apk_process.bat in the root will go through the apk's in the apk subfolder and
1. Decompile them to the decompiled subfolder
2. Edit the dimens.xml file in the res\values subfolder of the decompiled folder replacing all the <n>dip values with <4*n>px (So 640 dip becomes 2560px for example...)
3. Rebuild the apk to the dpimod_apk subfolder (using the -c option to keep original manifest and signature files)
The files folder contains the files used (apktool, the subscripts for each step, signature files, (g)awk and an awk script to process the xml file replacing the values, etc)
There is also a script for signing the apk manually, but somehow the apk then also doesn;t work in my case it seems...
ALl scripts are windows batch files (and an awk file) as I mainly use windows at home. Shouldn't be too hard for the linux users to convert them to bash files if desired...
*EDIT2*
Added patched services.jar (and original services.jar for restoration in case of issues). Flash through twrp recovery... This allows you to use the modded SecContacts_L.apk supplied, the services.jar needs to be patched to disable the signature verification for the (system) apk files. Note that this might cause issues (an invalid services.jar caused my phone to get stuck in boot... had to restore the original to be able to continue) so use at your own risk!
Great job !
I have not been able to decompile the contacts.apk either.. I am a bit rusty tho.. will have to look into that a little more.
fOmey said:
Great job !
I have not been able to decompile the contacts.apk either.. I am a bit rusty tho.. will have to look into that a little more.
Click to expand...
Click to collapse
Thanks! And yeah, weird stuff.
I actually was only really bothered by the camera, not using the samsung keyboard at all myself and don't mind the contacts as much (perfectly usable for me) but it's now a matter of principle If you find anything out, I would love to hear.
dagrim1 said:
Thanks! And yeah, weird stuff.
I actually was only really bothered by the camera, not using the samsung keyboard at all myself and don't mind the contacts as much (perfectly usable for me) but it's now a matter of principle If you find anything out, I would love to hear.
Click to expand...
Click to collapse
But In Call screen looks weird with 480 DPI right? Would you know any fix for that? Thanks.
Sent from my SM-G925F using XDA Free mobile app
ksekhar said:
But In Call screen looks weird with 480 DPI right? Would you know any fix for that? Thanks.
Sent from my SM-G925F using XDA Free mobile app
Click to expand...
Click to collapse
Yup, it does. (But again, doesn't bother me as much as I don't look at it long because I usually hold my phone to my ear anyway ).
But yeah, I think I know where to fix it... It's the Contacts apk I mentioned above but there is an issue with decompiling/rebuilding it so can't fix it yet. Looking into it.
Did notice when decompiling and recompiling including resources it fails, when keeping resources intact it does work.
To successfully mod seccontacts you have to do these steps :
- Decompile apk
- Edit xml files in res folder
- Recompile apk
- Extract xml edited files in res folder from recompiled apk
- Paste these xml files in the original apk in the res folder with compression tool like Winrar
It works I made this with my S5.
Meh, been looking into it some more and also found this:
http://forum.xda-developers.com/android/software-hacking/how-to-recompile-tw-contacts-phone-t3066350
and
http://www.ez-pg.com/guide-how-to-decompilerecompile-lollipop-seccontacts.html
I tried modifying the manifest as instructed, but the apk still didn't work. Perhaps because signature verfication is not properly disabled on my rom. BUt if it isn't it is also not for the majority of the users in which case siumply supplying the apk wouldn't work anyway.
I also tried resigning the apk, no luck. Copying the original manifast is also not going to work afaik with a changed manifest file...
More info about signature verficiation:
http://forum.xda-developers.com/showthread.php?t=2725233
http://forum.xda-developers.com/showthread.php?t=2342262
Perhaps I will try this soon as well, but for now I think I'll leave it be...
sebdigital said:
To successfully mod seccontacts you have to do these steps :
- Decompile apk
- Edit xml files in res folder
- Recompile apk
- Extract xml edited files in res folder from recompiled apk
- Paste these xml files in the original apk in the res folder with compression tool like Winrar
It works I made this with my S5.
Click to expand...
Click to collapse
Thanks for the tip, had looked into that as well but this xml file is in the values folder which is not simply found in the res folder of the apk but compiled into the resources.arsc file in the apk so this is not working unfortunately.
dagrim1 said:
Thanks for the tip, had looked into that as well but this xml file is in the values folder which is not simply found in the res folder of the apk but compiled into the resources.arsc file in the apk so this is not working unfortunately.
Click to expand...
Click to collapse
I'm on 5.1.1 today and noticed that contacts/dialer is (almost) multi DPI already without having to do anything. And your camera mod works on 5.1.1 too!
Sent from my SM-G920F using XDA Free mobile app
can u change this Camera 480 dpi camera s6 to 420 dpi?
https://mega.nz/#!M4Ui0KoR!TKsPKkMl-XQHyiJ_DNf53eQCGZTrYWhuHaAnhAYXeSM
thanks you very much
can be used for other than s6 for SamsungCamera4. ??
my android device A8 6
dagrim1 said:
Decided to start a new thread as this one was getting a bit messy (and I couldn't change the title anymore)
http://forum.xda-developers.com/galaxy-s6/themes-apps/mod-multi-dpi-samsung-apps-camera-t3141148
----------------------------------------------------------
Hi all, after changing the dpi to 480 the camera was the main thing bugging me. Looking for a solution I found this thread:
http://forum.xda-developers.com/galaxy-s6/themes-apps/mod-fix-samsung-camera-app-device-dpi-t3131995
But that did not work for me, so I decided to try it myself and I finally managed to create multi-dpi versions of the Camera and Samsung Keyboard apps. They are based on the apks from the XtreStoLite Universal Deo-Mod Edition 1.5 as I'm currently running that. So just give it a try (backup the original apks first! I usually just rename them to "filename.org") and let me know if it works for you. I tested on 480 and 520 dpi and that works here...
Installation:
1. Backup original apk (in system\app\SamsungCamera4 and/or systemm\app\SamsungIMEv2 )
2. Extract modded apk to the corresponding folder
3. Wipe data for the app
4. Reboot
I basically modified the dimens.xml file to hardcoded pixel sizes instead of dip value, modifying dip value caused other issues for me (camcorder not working, pro mode messing up). Hopefully it's of use to some.
I have not been able to fix the Contacts/Dialer (SecContacts_L.apk in the priv-app folder)! I either get a corrupt apk (parsing error) or it just won't show up in my apps. Corrupted apk gives a parsing error when trying to install manually, otherwise it just says 'install failed'.
I am guessing this is somethiong with the priv-app folder and other restrictions there. I also tried copying the apk to the system\app folder instead but that didn't work either...
If anyone has ANY idea how to fix this? (I tried with both apktool as apk multitool).
*SCRIPTS ADDED*
Added the scripts and all I've written for this to this post for those wanting to try themselves (dpi_mod.zip). They are not completely polished so need some manual editing every now and then...
Basically, doubleclicking apk_process.bat in the root will go through the apk's in the apk subfolder and
1. Decompile them to the decompiled subfolder
2. Edit the dimens.xml file in the res\values subfolder of the decompiled folder replacing all the <n>dip values with <4*n>px (So 640 dip becomes 2560px for example...)
3. Rebuild the apk to the dpimod_apk subfolder (using the -c option to keep original manifest and signature files)
The files folder contains the files used (apktool, the subscripts for each step, signature files, (g)awk and an awk script to process the xml file replacing the values, etc)
There is also a script for signing the apk manually, but somehow the apk then also doesn;t work in my case it seems...
ALl scripts are windows batch files (and an awk file) as I mainly use windows at home. Shouldn't be too hard for the linux users to convert them to bash files if desired...
*EDIT2*
Added patched services.jar (and original services.jar for restoration in case of issues). Flash through twrp recovery... This allows you to use the modded SecContacts_L.apk supplied, the services.jar needs to be patched to disable the signature verification for the (system) apk files. Note that this might cause issues (an invalid services.jar caused my phone to get stuck in boot... had to restore the original to be able to continue) so use at your own risk!
Click to expand...
Click to collapse
how to fix on parse error, after recompile SamsungCamera4.apk with apktool
with or without edit error on parse...
My device Galaxy-A8