Softbricked after OTA update SM-N900A - AT&T Galaxy Note 3 Q&A, Help & Troubleshooting

AT&T version of this thread: http://forum.xda-developers.com/showthread.php?p=47413669
Started with N900AUCUBMI9, rooted via RDLV (N900AUCUBMI9_OneClickBin)
accepted OTA update (i know) to N900AUCUBMJ5, lost root
Wanted root back, attempted RDLV again, got SECURE CHECK FAIL : cache, stuck in "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Found this thread: http://forum.xda-developers.com/showthread.php?p=47411605
Flashed PIT ONLY, successfully booted up into MJ5, unrooted. Should have left it alone there. KNOX flag 0x0
Wanted root back, thought I could downgrade BL, AP/PDA, Phone, CPC to MI9 as suggested in above thread.
BL fails with SW REV CHECK FAIL : [sbl1]Fused 2 > Binary 1. AP/PDA, fails with SECURE CHECK FAIL : system. Phone successfully flashed to MI9. CPC fails with SECURE CHECK FAIL : cache
Stuck in "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Flashed PIT again, phone tries to boot but "Process system isn't responding" after AT&T globe boot animation, then reboots
Attempted RDLV again, get SW REV CHECK FAIL : [sbl1]Fused 2 > Binary 1, presumably because the MI9 BL can't be flashed over the MJ5 BL.
I'm stuck folks. Any suggestions welcome. Am I just going to have to wait for a stock MJ5 package/files similar to the MI9 files in the thread above?
For those reading who were dummies like me and accepted the OTA update, lost their root, tried to re-root with RDLV: flash the PIT file ONLY from the above link and you should be back into MJ5, un-rooted.
Help please?

Well lets see here. I was rooted (Kingo) <Updated ver.
I saw the update.
Un-rooted with the SuperSU app.
Did the update
Re-rooted with Kingo.
Re-did all xposed/winam stuff.
Rebooted
Phone is on new firmware with root and I'm loving it.
The End.

LuckyColdJohnson said:
Well lets see here. I was rooted (Kingo) <Updated ver.
I saw the update.
Un-rooted with the SuperSU app.
Did the update
Re-rooted with Kingo.
Re-did all xposed/winam stuff.
Rebooted
Phone is on new firmware with root and I'm loving it.
The End.
Click to expand...
Click to collapse
yes, that's the way i should have done it (SU persist, un-root, OTA, SU root) but I didn't and now here i am.

I followed the info to flash PIT only and my phone rebooted. Now fc's allot of stuff. Can't get past it. Build number mi9, baseband mj5. Do you think someone will make an mj5 odin? Or any advice would be greatly appreciated.

Same here
Same situation here ;_; can you post just the Pit? the zip is taking forever for the fact that I just need an XML file.

ditto
+1 I was updated and rooted and decided to jack around with a data toggle in notification (/data/data/com.android.providers.settings/databases/settings.db) and here i am

So I flashed the .pit
which let me reboot.
However now I'm in a horrible limbo state where pen imput crashes in an infanite loop making anything on the phone painful to do.
I think it's because my PDA and CSC are MI9 but my phone updated to MJ5.
I tried recovery mode wipe and "reset Phone" in settings and the issues persist.
This lovely mismatch has also rendered my ability to install firmware via Kies imposible. Nulling my plan to just roll back to stock.
Anybody have an odin one click for MJ5? I'd rather be stock than inoperable.
I'm afraid to try the method listed above for Knox flag reasons. If rolling back to MI9 is unreliable and might throw flags.
Hope someone else gets further than I have soon.

LuckyColdJohnson said:
Well lets see here. I was rooted (Kingo) <Updated ver.
I saw the update.
Un-rooted with the SuperSU app.
Did the update
Re-rooted with Kingo.
Re-did all xposed/winam stuff.
Rebooted
Phone is on new firmware with root and I'm loving it.
The End.
Click to expand...
Click to collapse
Where is this kingo?
Sent from the phone with the best specs on the market, "NoTe III"

mnorris0678 said:
+1 I was updated and rooted and decided to jack around with a data toggle in notification (/data/data/com.android.providers.settings/databases/settings.db) and here i am
Click to expand...
Click to collapse
I soft bricked my phone probably 5 or 6 times before getting it to work!
Sent from my SAMSUNG-SM-N900A using Tapatalk

tyiphius said:
I soft bricked my phone probably 5 or 6 times before getting it to work!
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
Would you do us a solid, and elaborate on how you fixed it?

bloodyRevolver said:
I'm afraid to try the method listed above for Knox flag reasons. If rolling back to MI9 is unreliable and might throw flags.
Hope someone else gets further than I have soon.
Click to expand...
Click to collapse
FYI, nothing that I have domes so far has tripped KONX. Still at 0x0

bloodyRevolver said:
Would you do us a solid, and elaborate on how you fixed it?
Click to expand...
Click to collapse
+1

Sweet. Your OP lead me to believe that you tripped it somewhere. Honestly I'm beginning to care less and less about it. I honestly think that with a full ODIN of the current OTA WE'd be back in the clear. The inability to roll back after The thing updated without my permission is frustrating to say the least. Coming from iOS I'm also a bit surprised by the lack of OEM firmware existing in the wild.

settings.db
Might anybody have a stock unmodified /data/data/com.android.providers.settings/databases/settings.db file that i can try loading with adb?

Resolved issue with at&t.
Couldn't handle waiting for SM-N900A stock firmware so I took my phone to AT&T retail store (I didn't have warranty with them). They referred me to At&t Device support center and told me that I have a manufacture warranty with samsung for 1 year and since i didn't have any water damage or such, just a boot loop, i can just exchange it for a "like-new" product and might ship between 6 business days.

nikeflight19 said:
Couldn't handle waiting for SM-N900A stock firmware so I took my phone to AT&T retail store (I didn't have warranty with them). They referred me to At&t Device support center and told me that I have a manufacture warranty with samsung for 1 year and since i didn't have any water damage or such, just a boot loop, i can just exchange it for a "like-new" product and might ship between 6 business days.
Click to expand...
Click to collapse
I was offered the same deal. Preferred to hold out hope that we'd get an MJ5 firmware ripped and running before that.

Where can I find this pit file?
WHERE CAN i FIND THE PIT FILE
hunterdg said:
AT&T version of this thread: http://forum.xda-developers.com/showthread.php?p=47413669
Started with N900AUCUBMI9, rooted via RDLV (N900AUCUBMI9_OneClickBin)
accepted OTA update (i know) to N900AUCUBMJ5, lost root
Wanted root back, attempted RDLV again, got SECURE CHECK FAIL : cache, stuck in "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Found this thread: http://forum.xda-developers.com/showthread.php?p=47411605
Flashed PIT ONLY, successfully booted up into MJ5, unrooted. Should have left it alone there. KNOX flag 0x0
Wanted root back, thought I could downgrade BL, AP/PDA, Phone, CPC to MI9 as suggested in above thread.
BL fails with SW REV CHECK FAIL : [sbl1]Fused 2 > Binary 1. AP/PDA, fails with SECURE CHECK FAIL : system. Phone successfully flashed to MI9. CPC fails with SECURE CHECK FAIL : cache
Stuck in "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Flashed PIT again, phone tries to boot but "Process system isn't responding" after AT&T globe boot animation, then reboots
Attempted RDLV again, get SW REV CHECK FAIL : [sbl1]Fused 2 > Binary 1, presumably because the MI9 BL can't be flashed over the MJ5 BL.
I'm stuck folks. Any suggestions welcome. Am I just going to have to wait for a stock MJ5 package/files similar to the MI9 files in the thread above?
For those reading who were dummies like me and accepted the OTA update, lost their root, tried to re-root with RDLV: flash the PIT file ONLY from the above link and you should be back into MJ5, un-rooted.
Help please?
Click to expand...
Click to collapse

nabooki said:
WHERE CAN i FIND THE PIT FILE
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2502049
First page of the second link you posted. It's in the zip with all the other MI9 files. If you look further down the thread he also posted another version of the PIT. Read read read read.

Hello all.. Been gone for a bit. Catching up now and hoping for a solution but if anyone has figured this out, please let me know how or provide a link! (Mj5 Odin stock recovery)

Related

Bricked

I was rooted with designgears root method. I tried to put SU in survival mode to initiate the update to MJ5 but the update would fail after 26%. I figured I could go back to stock and repeat the process to see if i deleted any essential apps. I did not know which apps i deleted. I was able to return to stock using Kies. I saw the build was MI9 and figured since it matched the file name using De La Vega Root it would take but it didn't. Now, after using different types of MI9_OneClickBin.exe files it freezes. I tried the method found here: http://forum.xda-developers.com/showthread.php?t=2502049 but once I put the AP file in Odin, it too freezes. Now I'm just stuck and can't find a way to make my phone operational. (It's stuck on the Samsung Galaxy Note 3 splash). Any thoughts?
arod175 said:
I was rooted with designgears root method. I tried to put SU in survival mode to initiate the update to MJ5 but the update would fail after 26%. I figured I could go back to stock and repeat the process to see if i deleted any essential apps. I did not know which apps i deleted. I was able to return to stock using Kies. I saw the build was MI9 and figured since it matched the file name using De La Vega Root it would take but it didn't. Now, after using different types of MI9_OneClickBin.exe files it freezes. I tried the method found here: http://forum.xda-developers.com/showthread.php?t=2502049 but once I put the AP file in Odin, it too freezes. Now I'm just stuck and can't find a way to make my phone operational. (It's stuck on the Samsung Galaxy Note 3 splash). Any thoughts?
Click to expand...
Click to collapse
You can't use that method once you update with OTA, it will brick your device and until a full Odin updated firmware comes along, we're stuck with the soft bricked phone, or a nasty Pen force close. Here you go:
http://forum.xda-developers.com/showthread.php?t=2525279
Yea, I made mistakes. I can't wait until this bootloader is cracked but I went to AT&T warranty department and they're sending me a new phone. This thread could be closed. There are other threads with similar symptoms.

[Q] Update Broke Root, Note 3 is now not rooted, but root is installed

So, the situation is a bit weird. About a week and a half ago, some update came out for my AT&T Note 3, and after declining, later it forced me to install it. After installing, it seemed to have disabled root, but I still had the custom icon show up when it booted, and root functions were disabled. It was as if root was not uninstalled, but disabled. I've tried re-rooting the normal way, but that gives a fail when I try to use the OneClickBin application. I haven't tried skipping that and installing root for fear of bricking the phone on some incompatibility. If someone else has this problem or has solved it, please let me know what you did or give any advice you can. The ideal result would be for my phone to end up back in the stock firmware, updated and ready to root as if nothing was wrong. I'd also appreciate it if anyone can give me info on the update that broke it, so I can check for a root method which is compatible with it. Thanks in advance.
Ralkero said:
So, the situation is a bit weird. About a week and a half ago, some update came out for my AT&T Note 3, and after declining, later it forced me to install it. After installing, it seemed to have disabled root, but I still had the custom icon show up when it booted, and root functions were disabled. It was as if root was not uninstalled, but disabled. I've tried re-rooting the normal way, but that gives a fail when I try to use the OneClickBin application. I haven't tried skipping that and installing root for fear of bricking the phone on some incompatibility. If someone else has this problem or has solved it, please let me know what you did or give any advice you can. The ideal result would be for my phone to end up back in the stock firmware, updated and ready to root as if nothing was wrong. I'd also appreciate it if anyone can give me info on the update that broke it, so I can check for a root method which is compatible with it. Thanks in advance.
Click to expand...
Click to collapse
You got the update to MJ5, try using Kingo Root.
I'm noticing that Kingo Root's version page does not list the SM-N900A model. We're sure it's supported, right?
Yup! I used it on mj5 update
Solarenemy68 said:
You got the update to MJ5, try using Kingo Root.
Click to expand...
Click to collapse
Thanks, that worked.

[Q] Stock Rom? Problems

I rooted my device approximately 30 days ago and received OTA updates (4.3). The updates then of course, ruined my root. I tried to fix the problem by rerooting but noticed I kept getting a error every method I tried "SW REV CHECK FAIL : [sbl1]Fused 2 > Binary 1". I also tried unrooting. I have tried every method I can find. I've even soft bricked my phone twice. I put the PIT file reccomended in the forums on my phone and now it is giving me a "direct pen input has crashed" every 5-10 seconds and freezing my phone.
What can I do?
Baseband: n900AUCUBNB4
Carrier: AT&T
Model: n900A
knox 0x0
To my knowledge nb4 could only be rooted with kingo root
You need now to follow the mj5 restore thread with root then enable survival mode in super user then update to nb4 or go to a best buy and ask them to re flash nb4
Sent from my GT-P3110 using xda app-developers app
moveit124 said:
..."SW REV CHECK FAIL : [sbl1]Fused 2 > Binary 1"...
Click to expand...
Click to collapse
As far as I know, the "Fused" part has to do with the e-fuses that are in place within the phone. If you blow too many of them by doing things to your phone, and you try to flash a firmware that numbered lower than the current fuse count, it will fail.
I just took it to Samsung and said it was cause by the OTA update and they unbricked it for me... guess while under warranty as long as your Knox counter isn't tripped they will fix or replace your phone for free

[Q] Update Issue after downgrade

Let me pre-apologize because this has probably been asked a million times already but I haven't been able to find it.
Here's the quick rundown:
I towel rooted my AT&T galaxy S5
Afterwards it failed to complete any upgrades
This led me to think the same thing will happen when lollipop rolls out
I followed the unroot/downgrade guide posted by shortydoggg
This changed my firmware to an earlier version than what I had
I now get the update notices but the update won't complete
Instead of failing at 25% when I had towelroot, it now fails at 32%
I saw a post about the bootloader being incorrect but I haven't seen a solution yet
Big question? How do I resolve this where I will be able to receive the newest updates?
OTA updates are depenant on so many conditions (file permissions, ...) That they often fail even if you didn't root your device and simply reset/reflshed the ROM using Samsung Kies. I've been there.
If you can fully wipe and reflash the ROM using Samsung kies and the OTA still fails, locate your nearest att service center (not mobile retail stores), and take it in. Show them the OTA errors out (don't check for updates for 24 hours so you can let the att rep do it and see it) and they will reflash the ROM for you using their proprietary software. This will most likely get your OTA updates working again. Their software is similar to our Odin but for some reason it also does some extra stuff to your phone that Odin and kies don't.
You can take it in and they'll flash it for you even if kies doesn't recognize your phone. Just go in and complain about the OTA failing, don't make any suggestions and let the att tech genius offer you if you wanna flash and say yes please
Oh and don't forget to backup your files before hands.
*** Your question most likely belongs to the Q&A section.
GatMaster45 said:
Let me pre-apologize because this has probably been asked a million times already but I haven't been able to find it.
Here's the quick rundown:
I towel rooted my AT&T galaxy S5
Afterwards it failed to complete any upgrades
This led me to think the same thing will happen when lollipop rolls out
I followed the unroot/downgrade guide posted by shortydoggg
This changed my firmware to an earlier version than what I had
I now get the update notices but the update won't complete
Instead of failing at 25% when I had towelroot, it now fails at 32%
I saw a post about the bootloader being incorrect but I haven't seen a solution yet
Big question? How do I resolve this where I will be able to receive the newest updates?
Click to expand...
Click to collapse
Just follow step 3 under notes from this guide.
http://forum.xda-developers.com/showpost.php?p=55133105&postcount=1
shortydoggg said:
Just follow step 3 under notes from this guide.
http://forum.xda-developers.com/showpost.php?p=55133105&postcount=1
Click to expand...
Click to collapse
Sorry for being a little dense but there is more than one step 3.
Do you mean step 3 under the first section:
3. Place your phone into "Download Mode" (press and hold the Home, Volume Down, and Power keys until the phone powers on and displays warning screen, then press Volume Up key) and flash the G900A_ND3_Stock_Kernel using Odin's PDA slot(AP in Odin v3.09+)
Or the step 3 under the Notes section:
3. Should the NG3 ota update fail consider returning to stock NCE by flashing the G900A_Downgrade_to_NCE.tar using Odin's PDA slot(AP in Odin v3.09+) then taking the NG3 OTA update (or place the G900A_NCEtoNG3_OTA.zip onto your ext-sdcard and sideload from stock recovery). Once updated to NG3 continue from Step 2 above.
Thank you for your help
Step 3 under the notes section.

AT&T Tab S 8.4 - SM-T707A Lollipop upgrade released

Hey all,
Thought I'd let those of you that have an AT&T Tab S 8.4 know that Lollipop has been released today. Happened to be on the AT&T Software update page here: http://www.att.com/esupport/softwareUpdateArticle.jsp?sid=KB425812&cv=820 and noticed it listed the update.
Manually checked for updates on my tablet, it's downloading now. My 8.4 on AT&T is totally stock.
Downloading now... 1.1GB
manually checking shows nothing for me
Mine wasn't too laggy after the upgrade. But as I know from places like XDA usually a very good idea to do a full system wipe which I did.
What I am most thankful for is there is now an option to remove that Samsung screen that has those Samsung widgets that go full page. Can't recall what it is called. Yeah I know could have got rid of that using a 3rd party launcher in 4.4 but so happy Samsung put option there to disable it finally. To get rid of it, long press blank space like you were going to add a widget, then click Home Screen Settings, then uncheck "Content Home Screen".
Has anyone who rooted with kingroot updated? I'm assuming it'll kill root, just curious if I need to unroot prior, or if the update will still install. I'll post the answer tomorrow after I update.
I've had some Samsung devices which will update while rooted, and some that will not.
Russ77 said:
Has anyone who rooted with kingroot updated? I'm assuming it'll kill root, just curious if I need to unroot prior, or if the update will still install. I'll post the answer tomorrow after I update.
I've had some Samsung devices which will update while rooted, and some that will not.
Click to expand...
Click to collapse
Not sure it will work.
Maybe try to adapt the method given by ashyx here: http://forum.xda-developers.com/galaxy-tab-s/general/guide-how-to-root-tripping-knox-kitkat-t3129484
It worked successfully for me on the T800
Russ77 said:
Has anyone who rooted with kingroot updated? I'm assuming it'll kill root, just curious if I need to unroot prior, or if the update will still install. I'll post the answer tomorrow after I update.
I've had some Samsung devices which will update while rooted, and some that will not.
Click to expand...
Click to collapse
I'm rooted with Kingroot and it's currently downloading the update. If you load Xposed Framework and Wanam Xposed, under Security hacks there's a setting for Fake System Status that allows you to set it to Original.
I'll follow up when the download finishes.
Update: The download completed but the install failed and then got stuck in a boot loop. Ended up having to go to the Samsung place at Best Buy to have them re-flash KitKat. Now the tab is telling me I have to wait 24 hours to check for updates. I'm sure everything will be good now that I'm back on a factory image.
fleabeard said:
I'm rooted with Kingroot and it's currently downloading the update. If you load Xposed Framework and Wanam Xposed, under Security hacks there's a setting for Fake System Status that allows you to set it to Original.
I'll follow up when the download finishes.
Update: The download completed but the install failed and then got stuck in a boot loop. Ended up having to go to the Samsung place at Best Buy to have them re-flash KitKat. Now the tab is telling me I have to wait 24 hours to check for updates. I'm sure everything will be good now that I'm back on a factory image.
Click to expand...
Click to collapse
Turn off automatic date and time and manually advance it by a day, and try again.
When they re-flashed KitKat did it wipe your tablet? The OTA failed me when rooted, failed me after un-installing adaway and un-rooting and removing KingUser. I cannot do a firmware upgrade via Kies 3 as it's not available. I cannot do an emergency firmware recover via Kies 3 as it's not soft bricked. I can't find either the KitKat or the Lollipop firmwares online anywhere... Currently I have a tablet, works fine, I did a factory reset (in the back of my mind knew this wouldn't work) that has a custom status and won't take the OTA.
If anyone knows where I can find the KitKat firmware, or the OTA, please let me know.
Or maybe someone could grab the OTA off their tablet after downloading prior to updating and share the wealth with the community???
Has any kingroot user tried triangle away, unroot via kinguser, and take the OTA?
Also just realized that if I can fail the OTA, I can obviously download it... Where do I grab it from if I wanted to flash it with odin or sideload?
Russ77 said:
Has anyone who rooted with kingroot updated? I'm assuming it'll kill root, just curious if I need to unroot prior, or if the update will still install. I'll post the answer tomorrow after I update.
I've had some Samsung devices which will update while rooted, and some that will not.
Click to expand...
Click to collapse
Russ77 said:
Turn off automatic date and time and manually advance it by a day, and try again.
When they re-flashed KitKat did it wipe your tablet? The OTA failed me when rooted, failed me after un-installing adaway and un-rooting and removing KingUser. I cannot do a firmware upgrade via Kies 3 as it's not available. I cannot do an emergency firmware recover via Kies 3 as it's not soft bricked. I can't find either the KitKat or the Lollipop firmwares online anywhere... Currently I have a tablet, works fine, I did a factory reset (in the back of my mind knew this wouldn't work) that has a custom status and won't take the OTA.
If anyone knows where I can find the KitKat firmware, or the OTA, please let me know.
Or maybe someone could grab the OTA off their tablet after downloading prior to updating and share the wealth with the community???
Click to expand...
Click to collapse
OTA came down successfully while not rooted. The reflash at Best Buy didn't wipe it.
As far as I know, the factory images for the AT&T versions aren't available anywhere, or at least I've been unable to find them. They obviously exist because I'm pretty sure the guy at Best Buy used Kies to flash with an image that's available to him from Samsung.
I re-rooted last night in the attempt of using triangle away to clear customs status, then un-rooting. This was odd because device status still shows custom but download mode shows official and Knox is 0.
While I was briefly rooted again I downloaded the OTA in the hopes of copying it to my PC and updating via ADB Sideload... Couldn't find it. If anyone knows where Samsung puts these I'll grab it and post it to share.
im not rooted, performed a factory reset, and my device still doesn't see any updates. Can somebody provide a link to the ROM?
Same situation here - no root, no mods, no available update
Sent from my SM-G925V using XDA Premium HD app
Same Thing Here Also
bshaw100 said:
Same situation here - no root, no mods, no available update
Sent from my SM-G925V using XDA Premium HD app
Click to expand...
Click to collapse
I've got the same thing: no root, no mods, no update available! Darn!!!!
I've got the same thing: no root, no mods, no update available!
Russ77 said:
I re-rooted last night in the attempt of using triangle away to clear customs status, then un-rooting. This was odd because device status still shows custom but download mode shows official and Knox is 0.
While I was briefly rooted again I downloaded the OTA in the hopes of copying it to my PC and updating via ADB Sideload... Couldn't find it. If anyone knows where Samsung puts these I'll grab it and post it to share.
Click to expand...
Click to collapse
The OTA gets downloaded to /cache. If you are rooted you can see it. But the OTA is not a complete ROM, just a differential to the ROM you have.
Sent from my SM-T707V using XDA Premium HD app
still nothing
gshaw_nash said:
I've got the same thing: no root, no mods, no update available! Darn!!!!
Click to expand...
Click to collapse
gshaw1967 said:
I've got the same thing: no root, no mods, no update available!
Click to expand...
Click to collapse
I've reset several time and cannot download the update. I get "Connecting to DM Server" and then update interrupted. Has anyone gotten around this?
---------- Post added at 08:58 AM ---------- Previous post was at 08:11 AM ----------
gshaw1967 said:
I've reset several time and cannot download the update. I get "Connecting to DM Server" and then update interrupted. Has anyone gotten around this?
Click to expand...
Click to collapse
Turns out there is a imei problem with the tablet that is preventing the download. My imei number is paired with a IPhone 4. Anyway will take a few day to fix then the upgrade should work.
I get the same. I wiped my device hoping for a different outcome, and still no update.
I found this in the thread below.
It is an old tread but I'll comment anyway. SM-T807 is the 3G version while SM-T805 is the LTE version. Both Hardware (CPU/GPU) and comms modules are different. So 805 LTE (which has Lollipop) firmware won't work for 807 (no Lollipop is currently available nor Samsung plans to release soon).
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-tab-s/help/sm-t805-sm-t807a-t2961117
John.
After not being able to take the OTA after rooting, even after un rooting, not being able to find the OTA and sideload (not in /cache), and not able use Kies or Odin I finally took it to the Samsung kiosk at my bestbuy.
They reflashed 4.4.2, didn't wipe anything, and immediately downloaded and successfully installed the lollipop update after getting home and on WiFi.
Just don't mention that you rooted ;')

Categories

Resources