I achieved S-OFF with rumrunner on m HTC 802d (Dual-Sim) variant. Reading around threads I realized that its ok to flash anything with S-OFF so decided to flash RUU Zip M7 HTC Google Edition_3.06.1700.10. However suddenly the phone switched off and I had an error on the fastboot screen. I tried to issue the command again but it did not work. The phone's display did not start no matter what I tried. Prior to flashing I had set supercid 11111111 on my device.
Things I tried:
1. Holding power button for 90 seconds or more, restarting. It only shows connectivity in fastboot. However when I issue command fastboot devices, I get this:
???????????? fastboot
2. Trying to unlock boot loader with fastboot flash unlocktoken Unlock_code.bin. Result:
C:\fastboot>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.002s]
writing 'unlocktoken'...
FAILED (remote: unlock token check failed)
finished. total time: 0.007s
3. I tried to generate a new key and unlock it again at HTCDev but I get an error with the new identifier.
4. Tried flashing custom recovery. Result:
C:\fastboot>fastboot flash recovery recovery.img
sending 'recovery' (16383 KB)...
OKAY [ 0.828s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.830s
5. Tried to re-run the RUU mode and flash, but the phone restarts and gets struck without returning. Output:
C:\fastboot>fastboot oem rebootRUU
...
(bootloader) Start Verify: -1
OKAY [ 0.035s]
finished. total time: 0.036s
C:\fastboot>fastboot getvar all
< waiting for device >
6. Tried clearing cache: fastboot erase cache. Output:
C:\fastboot>fastboot erase cache
erasing 'cache'...
FAILED (remote: erasing error!)
finished. total time: 0.001s
7. Tried running stock RUU (exe), but it gets struck on "Verifying information on your Android phone..." forever.
8. Tried flashing the zip directly. Result:
C:\fastboot>fastboot flash zip RUU.zip
sending 'zip' (428998 KB)...
OKAY [ 21.698s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 21.701s
9. Issued the lock command
C:\fastboot>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.001s]
finished. total time: 0.002s
10. fastboot getvar all commands gives this:
C:\fastboot>fastboot getvar all
(bootloader) version-bootloader: 1.54.0000 <- earlier to attempting the flash this was 2.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: myimeinumber
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3776mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: dirty-94cf81a8fd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.020s
As you can see some fields are blank.
----
Please help me!
juicylife said:
I achieved S-OFF with rumrunner on m HTC 802d (Dual-Sim) variant. Reading around threads I realized that its ok to flash anything with S-OFF so decided to flash RUU Zip M7 HTC Google Edition_3.06.1700.10. However suddenly the phone switched off and I had an error on the fastboot screen. I tried to issue the command again but it did not work. The phone's display did not start no matter what I tried. Prior to flashing I had set supercid 11111111 on my device.
Things I tried:
1. Holding power button for 90 seconds or more, restarting. It only shows connectivity in fastboot. However when I issue command fastboot devices, I get this:
???????????? fastboot
2. Trying to unlock boot loader with fastboot flash unlocktoken Unlock_code.bin. Result:
C:\fastboot>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.002s]
writing 'unlocktoken'...
FAILED (remote: unlock token check failed)
finished. total time: 0.007s
3. I tried to generate a new key and unlock it again at HTCDev but I get an error with the new identifier.
4. Tried flashing custom recovery. Result:
C:\fastboot>fastboot flash recovery recovery.img
sending 'recovery' (16383 KB)...
OKAY [ 0.828s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.830s
5. Tried to re-run the RUU mode and flash, but the phone restarts and gets struck without returning. Output:
C:\fastboot>fastboot oem rebootRUU
...
(bootloader) Start Verify: -1
OKAY [ 0.035s]
finished. total time: 0.036s
C:\fastboot>fastboot getvar all
< waiting for device >
6. Tried clearing cache: fastboot erase cache. Output:
C:\fastboot>fastboot erase cache
erasing 'cache'...
FAILED (remote: erasing error!)
finished. total time: 0.001s
7. Tried running stock RUU (exe), but it gets struck on "Verifying information on your Android phone..." forever.
8. Tried flashing the zip directly. Result:
C:\fastboot>fastboot flash zip RUU.zip
sending 'zip' (428998 KB)...
OKAY [ 21.698s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 21.701s
9. Issued the lock command
C:\fastboot>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.001s]
finished. total time: 0.002s
10. fastboot getvar all commands gives this:
C:\fastboot>fastboot getvar all
(bootloader) version-bootloader: 1.54.0000 <- earlier to attempting the flash this was 2.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: myimeinumber
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3776mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: dirty-94cf81a8fd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.020s
As you can see some fields are blank.
----
Please help me!
Click to expand...
Click to collapse
I got the same problem here! Did you find how to fix?
pdpascal said:
I got the same problem here! Did you find how to fix?
Click to expand...
Click to collapse
Would you mind posting what you get from "fastboot getvar all" but with your imei and MID removed? I may be able to help you
LightSpeedIII said:
Would you mind posting what you get from "fastboot getvar all" but with your imei and MID removed? I may be able to help you
Click to expand...
Click to collapse
Sure!
fastboot devices:
???????????? fastboot
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) meid: 00000000000000 (I tried to change the MID, my is the Chinese model. I used the Europe model MID to be able to apply the firmware)
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 2703mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!./f
Thank you do much!
pdpascal said:
Sure!
fastboot devices:
???????????? fastboot
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) meid: 00000000000000 (I tried to change the MID, my is the Chinese model. I used the Europe model MID to be able to apply the firmware)
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 2703mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!./f
Thank you do much!
Click to expand...
Click to collapse
The issue of the original thread starter "juicylife" is LOCKED bootloader, that's why he can't flash stock or custom recoveries and some ADB commands that needs unlocked bootloader will not work!
You are S-Off that's good.
1. Do you remember your original CID# or your software version? it is important to know from what region you belong.
2. Can you still access Fastboot or Recovery Menu?
eyeyousee said:
The issue of the original thread starter "juicylife" is LOCKED bootloader, that's why he can't flash stock or custom recoveries and some ADB commands that needs unlocked bootloader will not work!
You are S-Off that's good.
1. Do you remember your original CID# or your software version? it is important to know from what region you belong.
2. Can you still access Fastboot or Recovery Menu?
Click to expand...
Click to collapse
Hi there!
Mine is
M7C_DUG – Device ID: HTC 802w
Networks: Dual Sim W-CDMA/GSM
MID: PN0771000
Region: China, Russia, Europe
The problem is when I try "fastboot oem rebootRUU" :
...
(bootloader) Start Verify: -1
OKAY [ 0.043s]
finished. total time: 0.043s
If I try "fastboot flash zip room.zip":
OKAY [ 0.850s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 0.851s
It was HBoot 2.49 as well. Seems that after start the flash firmware process the phone's hardware is no longer recognized, the display for instance is not. Perhaps the eMMC needs a JTAG?
Related
need help [urgent]
here I post command from CMD :
++++++++++++++++
C:\android>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.000s]
finished. total time: 0.000s
++++++++++++++++
C:\android>fastboot flash hboot vivo_downgrade.img
sending 'hboot' (1024 KB)...
OKAY [ 0.421s]
writing 'hboot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.546s
C:\android>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.172s]
finished. total time: 0.172s
++++++++++++++++
C:\android>fastboot flash recovery recovery.img
sending 'recovery' (5386 KB)...
OKAY [ 1.669s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.340s
C:\android>fastboot flash boot boot.img
sending 'boot' (3350 KB)...
OKAY [ 1.030s]
writing 'boot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.451s
+++++++++++++++++++++++++
C:\android>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.000s]
finished. total time: 0.000s
C:\android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.16.0000
(bootloader) version-baseband: 3805.09.03.27_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.30.707.1
(bootloader) serialno: HT155TD00844
(bootloader) imei: 355301044806969
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3213000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3794mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d3a3895d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s
+++++++++++++++++++++
I cant access RECOVERY MODE
I cant access My ROM/Stock ROM
Help me
wesly.btm said:
need help [urgent]
here I post command from CMD :
++++++++++++++++
C:\android>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.000s]
finished. total time: 0.000s
++++++++++++++++
C:\android>fastboot flash hboot vivo_downgrade.img
sending 'hboot' (1024 KB)...
OKAY [ 0.421s]
writing 'hboot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.546s
C:\android>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.172s]
finished. total time: 0.172s
++++++++++++++++
C:\android>fastboot flash recovery recovery.img
sending 'recovery' (5386 KB)...
OKAY [ 1.669s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.340s
C:\android>fastboot flash boot boot.img
sending 'boot' (3350 KB)...
OKAY [ 1.030s]
writing 'boot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.451s
+++++++++++++++++++++++++
C:\android>fastboot oem lock
...
(bootloader) Device was already locked!
OKAY [ 0.000s]
finished. total time: 0.000s
C:\android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.16.0000
(bootloader) version-baseband: 3805.09.03.27_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.30.707.1
(bootloader) serialno: HT155TD00844
(bootloader) imei: 355301044806969
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3213000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3794mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d3a3895d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s
+++++++++++++++++++++
I cant access RECOVERY MODE
I cant access My ROM/Stock ROM
Help me
Click to expand...
Click to collapse
What are you trying to accomplish? The vivo_downgrade.img is only used when you have Revolutionary S-OFF HBOOT installed. Also, you will only be able to use the 'fastboot flash' command when the bootloader is in the UNLOCKED state. The fact that you LOCKED it before the attempting the 'fastboot flash hboot' command probably saved you from making a huge mistake.
You have 2 options to get your phone operational again.
1. You need to UNLOCK your bootloader again then flash a custom Recovery and then flash a custom ROM.
2. Since you are now RELOCKED, you can take the 2.30.707.1 RUU and run it to return to stock.
You have 2 options to get your phone operational again.
1. You need to UNLOCK your bootloader again then flash a custom Recovery and then flash a custom ROM.
2. Since you are now RELOCKED, you can take the 2.30.707.1 RUU and run it to return to stock.
+++++++++++
pls advise, the link for Item 1 & 2?
thanks,
how to I get S-OFF,
since I cant load to Menu HTC forgot to check Setting > Developer Option > USB Debug
I cant access recovery mode.
wesly.btm said:
You have 2 options to get your phone operational again.
1. You need to UNLOCK your bootloader again then flash a custom Recovery and then flash a custom ROM.
2. Since you are now RELOCKED, you can take the 2.30.707.1 RUU and run it to return to stock.
+++++++++++
pls advise, the link for Item 1 & 2?
thanks,
Click to expand...
Click to collapse
wesly.btm said:
how to I get S-OFF,
since I cant load to Menu HTC forgot to check Setting > Developer Option > USB Debug
I cant access recovery mode.
Click to expand...
Click to collapse
If you want to gain S-OFF, you first will need to do option 1 and then use the Downgrade script.
If you need links, you should search this forum and read the sticky posts. If you have never unlocked the bootloader, then you need to use the procedure at HTCDEV.com. If you have used that procedure, then you can simply use the same unlock_token.bin again to unlock it.
tpbklake said:
If you want to gain S-OFF, you first will need to do option 1 and then use the Downgrade script.
If you need links, you should search this forum and read the sticky posts. If you have never unlocked the bootloader, then you need to use the procedure at HTCDEV.com. If you have used that procedure, then you can simply use the same unlock_token.bin again to unlock it.
Click to expand...
Click to collapse
I need help
short story:
Error when flashing RUU? ERROR [110]: FILE OPEN ERROR
Now, I know the problem was my Desire was S-OFF.
When pull out the USB cable:
[1]SPLASH 1 – OK
[2]USERDATA - OK
[3]SYSTEM - FAIL-PU
[4]RECOVERY - OK
[5]RADIO_CUST - OK
[6]RADIO_V2 - OK
[7]BOOTLOADER - Bypassed
[8]BOOT - OK
Partition update fail!
Update fail!
HTC logo when I turn on the phone with four figures on the squares
After that I tried to flash recovery with fastboot, but I can’t install my backup and the all custom room was frozen on the first boot.
My nandroid beckup:
system: 254MB
data: 128 MB
cache: 2,6 MB
First I tried to flash bravo_alpharev.img but it dosn’t work. The RUU flash was error as well.
I heard that:
flash- fastboot- bravo_downgrader.img
Now the error massege: RUU? ERROR [132]: SIGNATURE ERROR
http://forum.xda-developers.com/showthread.php?t=2214309
Fastboot flash:
[Q] Fastboot 'FAILED (remote: signature verify fail)
http://forum.xda-developers.com/showthread.php?t=1357625
+++++++++++++++++++++++++++++++
C:\android>fastboot flash recovery recovery.img
sending 'recovery' (5386 KB)...
OKAY [ 1.669s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.340s
++++++++++++++++++++++++++++++++++++++
C:\android>fastboot flash boot boot.img
sending 'boot' (3350 KB)...
OKAY [ 1.030s]
writing 'boot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.451s
++++++++++++++++
++++++++++++++++++++++++
C:\android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.80.0000
(bootloader) version-baseband: 4.06.00.02_2
(bootloader) version-cpld: None
(bootloader) version-microp: 051d
(bootloader) version-main: SetRuuNbhUpdate
(bootloader) serialno: SH0C4PL02400
(bootloader) imei: 355302049055073
(bootloader) product: Bravo
(bootloader) platform: HBOOT-8x50
(bootloader) modelid: PB9920000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3991mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-6175d920
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0 I have no displayed this last line
all: Done!
finished. total time: 0.031s
+++++++++++++++++++++++++++
Now I can’t turn on the phone. I can charging the buttery and if I connect the USB cable and my PC , I can use some base function but I can’t flashing.
So put something on the SD an turn on fastboot mode or any other mode is not working for my phone. If I try to turn on I have no nothing on the screen at the moment. Black screen….
I heard maybe I locked the bootloader so….
bootloader (bootloader lock) I try to unlock and I used HTCdev
Windows fail process stopped ect.
What can I do now?
Is there any solution for me?
GeriW said:
I need help
short story:
Error when flashing RUU? ERROR [110]: FILE OPEN ERROR
Now, I know the problem was my Desire was S-OFF.
When pull out the USB cable:
[1]SPLASH 1 – OK
[2]USERDATA - OK
[3]SYSTEM - FAIL-PU
[4]RECOVERY - OK
[5]RADIO_CUST - OK
[6]RADIO_V2 - OK
[7]BOOTLOADER - Bypassed
[8]BOOT - OK
Partition update fail!
Update fail!
HTC logo when I turn on the phone with four figures on the squares
After that I tried to flash recovery with fastboot, but I can’t install my backup and the all custom room was frozen on the first boot.
My nandroid beckup:
system: 254MB
data: 128 MB
cache: 2,6 MB
First I tried to flash bravo_alpharev.img but it dosn’t work. The RUU flash was error as well.
I heard that:
flash- fastboot- bravo_downgrader.img
Now the error massege: RUU? ERROR [132]: SIGNATURE ERROR
http://forum.xda-developers.com/showthread.php?t=2214309
Fastboot flash:
[Q] Fastboot 'FAILED (remote: signature verify fail)
http://forum.xda-developers.com/showthread.php?t=1357625
+++++++++++++++++++++++++++++++
C:\android>fastboot flash recovery recovery.img
sending 'recovery' (5386 KB)...
OKAY [ 1.669s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.340s
++++++++++++++++++++++++++++++++++++++
C:\android>fastboot flash boot boot.img
sending 'boot' (3350 KB)...
OKAY [ 1.030s]
writing 'boot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.451s
++++++++++++++++
++++++++++++++++++++++++
C:\android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.80.0000
(bootloader) version-baseband: 4.06.00.02_2
(bootloader) version-cpld: None
(bootloader) version-microp: 051d
(bootloader) version-main: SetRuuNbhUpdate
(bootloader) serialno: SH0C4PL02400
(bootloader) imei: 355302049055073
(bootloader) product: Bravo
(bootloader) platform: HBOOT-8x50
(bootloader) modelid: PB9920000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3991mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-6175d920
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0 I have no displayed this last line
all: Done!
finished. total time: 0.031s
+++++++++++++++++++++++++++
Now I can’t turn on the phone. I can charging the buttery and if I connect the USB cable and my PC , I can use some base function but I can’t flashing.
So put something on the SD an turn on fastboot mode or any other mode is not working for my phone. If I try to turn on I have no nothing on the screen at the moment. Black screen….
I heard maybe I locked the bootloader so….
bootloader (bootloader lock)I try to unlock and I used HTCdev
Windows fail process stopped ect.
What can I do now?
Is there any solution for me?
Click to expand...
Click to collapse
Why do you reply to a thread that is more than a year old?
As well as this, you have posted in the wrong device forum. This is for the HTC Incredible S, not the HTC Desire xD
You may have better luck in the Desire forum
Sent from my Nexus 5
I tried following this tutorial: http://forum.xda-developers.com/showthread.php?t=2322820 to change my Modelid for OTA update. Download the files on the post and followed the given example, but when I tried to writemid, all I get is this:
C:\platform-tools>fastboot oem writemid PN0712000
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.004s]
finished. total time: 0.004s
and when I run fastboot getvar all, I get this:
C:\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: PRIVATE
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3587mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.024s
fastboot recovery and erase cache commands are all failing. All I have I a blank screen. Can someone help me out?
Note: The phone had SuperCID and S-OFF and was unlocked using htcdev prior to the problem
Write super CID back again, Super CID allows you do get updates, if its the sense 6 update your after you wont get it cos they've found a problem / bug and pulled it from the servers until further notice, people who did get it have the bug.
Seanie280672 said:
Write super CID back again, Super CID allows you do get updates, if its the sense 6 update your after you wont get it cos they've found a problem / bug and pulled it from the servers until further notice, people who did get it have the bug.
Click to expand...
Click to collapse
I have. This is what I got:
C:\platform-tools>fastboot oem writecid 11111111
...
(bootloader) Start Verify: -1
(bootloader) Input CID is super CID
(bootloader) Start Verify: -1
OKAY [ 0.078s]
finished. total time: 0.078s
But when I input getvar, CID is still blank
I'm thinking of downloading Ubuntu to try out the command in terminal
Ickling said:
I'm thinking of downloading Ubuntu to try out the command in terminal
Click to expand...
Click to collapse
i'm pretty sure you have a problem with MID not CID, try writing your original MID back, and hope for the best... and make sure it's your original MID, down to every single character (not an extra 0, and not a missing 0, etc), exactly the way it was before.
nkk71 said:
i'm pretty sure you have a problem with MID not CID, try writing your original MID back, and hope for the best... and make sure it's your original MID, down to every single character (not an extra 0, and not a missing 0, etc), exactly the way it was before.
Click to expand...
Click to collapse
I've tried writing MID and what I get is this:
C:\platform-tools>fastboot oem writemid PN0771***
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.002s]
finished. total time: 0.002s
Ickling said:
I've tried writing MID and what I get is this:
C:\platform-tools>fastboot oem writemid PN0771***
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.002s]
finished. total time: 0.002s
Click to expand...
Click to collapse
1- That command only works with ENG hboots
2- and what is PN0771*** supposed to be
PN0771**** was the ModelId I saw before trying to change it
have you tried
fastboot oem writemid PN077100
?
Yep. I've tried that, still the same error
As the title says, I just bircked my M7... the thing is, that I tried to update TWRP recovery, but the thing is, that my phone is a m7ul, and I tried the twrp for m7, now i can only enter bootloader, but i can't do anything, i can't go to rebootRUU, i can't install any other recovery.
when I put:
fastboot reboot recovery - it just stays there, like stuck
fastboot getvar all - I get all this info
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4T.20.3218.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.502.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXX (actual SN masked)
(bootloader) imei: XXXXXXXXXXXXX (actual IMEI masked)
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3943mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
fastboot flash recovery openrecovery-twrp-2.8.0.2-m7ul.img - it says:
Code:
target reported max download size of 1526722560 bytes
sending 'recovery' (11610 KB)...
OKAY [ 1.688s]
writing 'recovery'...
FAILED (remote: image update error)
finished. total time: 2.858s
and then it gets stuck...
What can I do??
Did you erase cache after the recovery flash?
And your phone is a great candidate for rumrunner s-off on hboot 1.55
ZeroCool11 said:
As the title says, I just bircked my M7... the thing is, that I tried to update TWRP recovery, but the thing is, that my phone is a m7ul, and I tried the twrp for m7, now i can only enter bootloader, but i can't do anything, i can't go to rebootRUU, i can't install any other recovery.
when I put:
fastboot reboot recovery - it just stays there, like stuck
fastboot getvar all - I get all this info
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4T.20.3218.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.502.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXX (actual SN masked)
(bootloader) imei: XXXXXXXXXXXXX (actual IMEI masked)
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3943mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
fastboot flash recovery openrecovery-twrp-2.8.0.2-m7ul.img - it says:
Code:
target reported max download size of 1526722560 bytes
sending 'recovery' (11610 KB)...
OKAY [ 1.688s]
writing 'recovery'...
FAILED (remote: image update error)
finished. total time: 2.858s
and then it gets stuck...
What can I do??
Click to expand...
Click to collapse
Code:
fastboot reboot recovery
This command doesn't exist so its normal that its not doing anything.
update your android sdk and your HTC drivers to latest version and flash twrp 2.6.3.3, check MD5 on your downloads.
Btw why updating the recovery? Recovery doesn't need to be updated, newer recovery doesn't mean better. Unless the rom you want to flash absolutely need a specific version (mentioned in the rom OP), stay with 2.6.3.3, its the most stable version.
Btw twrp for M7 is what you need for your M7_UL. "M7" twrp are compatible for M7_UL and M7_U
I tried to install TWRP 2.6.3.3 and it shows this:
< waiting for device >
target reported max download size of 1526722560 bytes
sending 'recovery' (9184 KB)...
OKAY [ 1.218s]
writing 'recovery'...
FAILED (remote: image update error)
finished. total time: 2.388s
I Tried Rummrunner and it doesn't work, i can't get to RebootRUU... or Recovery... i can only go to Bootloader... and that's all...
Please wait....
..........
ERROR: run rumrunner again and READ (no adb connection to device. Debugging on?
Drivers?)
Press ENTER to exit
ZeroCool11 said:
I Tried Rummrunner and it doesn't work, i can't get to RebootRUU... or Recovery... i can only go to Bootloader... and that's all...
Please wait....
..........
ERROR: run rumrunner again and READ (no adb connection to device. Debugging on?
Drivers?)
Press ENTER to exit
Click to expand...
Click to collapse
I think you need to start over
In bootloader / fastboot usb / use fastboot oem lock
then flash this RUU from your PC
http://dl3.htc.com/application/RUU_...13_10.38j.1157.04_release_334235_signed_2.exe
When you phone boots up skip all the setup and go to settings / developer options / usb debugging is checked
then settings / Power / fastboot at the bottom is unchecked
Now try adb devices / you see you phone serial number / if no fix your drivers / install htc sync the in add remove programs, uninstall htc sync / this will leave just the driver installed.
after adb works on the phone in android do / adb reboot-bootloader
now fastboot devices / returns the serial number
now unlock bootloader / flash TWRP 2.6.3.3 with
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
You should now have working custom recovery and can continue to flash a rom with root and use rumrunner to s-off
Hello, sorry, i was AFK for the weekend , about that, when I Put "fastboot oem lock" it says OK and then it gets stuck, then, after I reboot it says that is unlocked...
I'm trying to RUU a sprint htc one m8, I am htcdev unlocked, and currently running sinless rom 3.4.2, and the latest TWRP, now I know I must relock my bootloader in order to RUU and I already tried that.
here is my output when I run fastboot oem lock
Code:
(bootloader) [PGFS] partition_update_pgfs: pg1fs_security
(bootloader) Lock successfully...
(bootloader) deinit_lcd
(bootloader) mipi display off
(bootloader) mdp_clock_off
(bootloader) turn off fd8c2308 failed 1 times. Try again...
(bootloader) disable_mmss_clk done
(bootloader) pll1_disable done
(bootloader) TZ_HTC_SVC_DISABLE ret = -1610744452 (0x9FFDFD7C)
(bootloader) [CRITICAL] SPMI write command failure: cmd_id = 0, error
(bootloader) = 4
(bootloader) [CRITICAL] SPMI write command failure: cmd_id = 0, error
(bootloader) = 4
(bootloader) [INFO] Rebooting device
ERROR: usb_read failed with status e00002ed
FAILED (status read failed (No such file or directory))
finished. total time: 1.251s
but on the bootloader I see the tampered flag and re-locked flag with "security warning below
now here's my "getvar all"
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.08.20.0612_4
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: **was actually blank**
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: **censored**
(bootloader) imei: **censored**
(bootloader) imei2: Not Support
(bootloader) meid: 99000499040678
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: d4c3cae5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.007s
here is what happened when I tried to flash the full firmware from O.M.J.'s post
Code:
target reported max download size of 1830612992 bytes
sending 'zip' (6598 KB)...
OKAY [ 0.807s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.046s
and here is the output when i try to flash the rom.zip I extracted from htc's newest RUU exe
Code:
./fastboot flash zip rom.zip
target reported max download size of 1830612992 bytes
sending 'zip' (1652270 KB)...
OKAY [ 47.785s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 108.972s
any help is appreciated
What happened when you tried to run the RUU once you relocked your bootloader?
Magnum_Enforcer said:
What happened when you tried to run the RUU once you relocked your bootloader?
Click to expand...
Click to collapse
I did relocked before running the RUU the out put was this
Code:
./fastboot flash zip rom.zip
target reported max download size of 1830612992 bytes
sending 'zip' (1652270 KB)...
OKAY [ 47.785s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 108.972s
I got the "rom.zip" from htc's RUU exe
Managed to RUU through parallels desktop, here's what I did:
I relocked my bootloader (after doing this I got stucked on the bootloader)
I started parallels desktop on my mac and connected my phone in bootloader mode, assigning the device to the virtual machine
I ran the RUU exe (everything went fine)
profit
Was trying to put my HTC One M7 back to stock to give to my mother-inlaw. I was planning on running an RUU on it, so I relocked the bootloader and ever since I can't seem to do anything with it. It will only boot into the bootloader. I can't seem to unlock it using htc dev now either. any ideas? Any help is appreciated.
This is some info.
C:\adb>fastboot getvar -all
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-microp: None
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4301mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e82187e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
-all: Done!
finished. total time: 16.711s
When I try to unlock it, this is what I see in my CMD prompt.
C:\adb>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.142s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.004s]
finished. total time: 0.147s
But nothing ever comes up on my phone like it shows in the instructions.
HuMpS 97 DoHc said:
When I try to unlock it, this is what I see in my CMD prompt.
C:\adb>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.142s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.004s]
finished. total time: 0.147s
But nothing ever comes up on my phone like it shows in the instructions.
Click to expand...
Click to collapse
what is your original cid number, because 11111111 wont be the original, you cant unlock the bootloader as you locked it with a custom recovery on there, and now the only way to get stock recovery on there or flash an RUU is to know your original cid or version main.
Seanie280672 said:
what is your original cid number, because 11111111 wont be the original, you cant unlock the bootloader as you locked it with a custom recovery on there, and now the only way to get stock recovery on there or flash an RUU is to know your original cid or version main.
Click to expand...
Click to collapse
BM___001 would be my cid.
I've changed my CID back to stock. Now what did I need to do? I can't seem to find an RUU for Bell mobility anywhere.
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT346W903917
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4188mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e82187e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.051s
When I try to apply a Bell RUU from this thread http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944 This is the error message I get. Any ideas or help???
C:\adb>htc_fastboot reboot-bootloader
rebooting into bootloader... OKAY
Execution time is 40(ms)
C:\adb>htc_fastboot oem rebootRUU
... (bootloader) Start Verify: 3
OKAY
Execution time is 44(ms)
C:\adb>htc_fastboot flash zip RUU.zip
error: preprocess_file : Cannot open file RUU.zip
C:\adb>htc_fastboot flash zip RUU.zip
sending 'zip'... (43286 KB) OKAY
sending time = 2.972 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (status read failed (Too many links))
Execution time is 9(s)
C:\adb>htc_fastboot reboot-bootloader
rebooting into bootloader... FAILED (status read failed (Unknown error))
Execution time is 5(s)
HuMpS 97 DoHc said:
When I try to apply a Bell RUU from this thread http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944 This is the error message I get. Any ideas or help???
C:\adb>htc_fastboot reboot-bootloader
rebooting into bootloader... OKAY
Execution time is 40(ms)
C:\adb>htc_fastboot oem rebootRUU
... (bootloader) Start Verify: 3
OKAY
Execution time is 44(ms)
C:\adb>htc_fastboot flash zip RUU.zip
error: preprocess_file : Cannot open file RUU.zip
C:\adb>htc_fastboot flash zip RUU.zip
sending 'zip'... (43286 KB) OKAY
sending time = 2.972 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (status read failed (Too many links))
Execution time is 9(s)
C:\adb>htc_fastboot reboot-bootloader
rebooting into bootloader... FAILED (status read failed (Unknown error))
Execution time is 5(s)
Click to expand...
Click to collapse
Remove your IMEI number from your above posts! Never post your IMEI.
How did you managed to change your CID with the phone being S-ON ?!!
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
Click to expand...
Click to collapse
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
Click to expand...
Click to collapse
You can't use a 7.xx.xxx.x ruu unless your firmware is at least 6.xx.xxx.x (you're not)
alray said:
Remove your IMEI number from your above posts! Never post your IMEI.
How did you managed to change your CID with the phone being S-ON ?!!
You can't use a 7.xx.xxx.x ruu unless your firmware is at least 6.xx.xxx.x (you're not)
Click to expand...
Click to collapse
I removed my imei, thanks. I honestly thought this phone was S-OFF but I hadn't actually used it for much in over a year since I have a m8. Do you have any ideas of what I can do? my bootloader is now relocked and I can't seem to unlock it.
So i was able to flash a signed firmware onto my phone which for my carrier Bell Mobility, its 3.23.666.1. But now where can I go? i still can't seem to unlock the bootloader. any ideas?
my getvar info now.
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.23.666.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3747mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-a6a74fd020
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.234s
Anyone with any ideas??? Please.
HuMpS 97 DoHc said:
Anyone with any ideas??? Please.
Click to expand...
Click to collapse
sorry I struggle to get on here sometimes during the week as my work takes over my life.
could you post a link to the 3.xx.666.x firmware you flashed please.
thats the firmware I used. https://www.dropbox.com/s/m1mha8jx36ceoe5/firmware.zip?dl=0
alray said:
Remove your IMEI number from your above posts! Never post your IMEI.
How did you managed to change your CID with the phone being S-ON ?!!
You can't use a 7.xx.xxx.x ruu unless your firmware is at least 6.xx.xxx.x (you're not)
Click to expand...
Click to collapse
Seanie280672 said:
sorry I struggle to get on here sometimes during the week as my work takes over my life.
could you post a link to the 3.xx.666.x firmware you flashed please.
Click to expand...
Click to collapse
HuMpS 97 DoHc said:
thats the firmware I used. https://www.dropbox.com/s/m1mha8jx36ceoe5/firmware.zip?dl=0
Click to expand...
Click to collapse
I'm unable to check it just yet, but it's just a zip file, so make sure it contains recovery.img, also when you flash it, you will need to flash it twice as the first time is just a pre update, after that, check that you have stock recovery by selecting recovery from the bootlpader screen, you should be presented with a red exclamation mark, volume up and power to get the menu, select factory reset.
Now boot to the bootloader and get a new unlock token from HTC dev website, and try and unlock your bootloader, once done, you can then flash twrp recovery, and flash your stock backup, will post the link later, then reflash stock recovery and update, or try and get s-off with rumrunner before updating.