So I have my dad's phone. Whenever I install Jelly bean, the phone stops making calls. There's celular internet, text messages AND even receive calls. But whenever he calls someone, it hangs-up right away.
THEN, we change the SIM to my SIM. And everything works perfectly.
So to sum it up:
ICS + dad's SIM: Everything is perfect.
JB + dad's SIM: Everything works except making calls.
ICS + my SIM / JB + My SIM: Everything works perfectly.
What could be the cause for this problem?
Bei60 said:
So I have my dad's phone. Whenever I install Jelly bean, the phone stops making calls. There's celular internet, text messages AND even receive calls. But whenever he calls someone, it hangs-up right away.
THEN, we change the SIM to my SIM. And everything works perfectly.
So to sum it up:
ICS + dad's SIM: Everything is perfect.
JB + dad's SIM: Everything works except making calls.
ICS + my SIM / JB + My SIM: Everything works perfectly.
What could be the cause for this problem?
Click to expand...
Click to collapse
Are you talking about the default firmware from samsung, or a custom rom?
If the update came over the air (OTA), you might just want to get back to factory settings.
There might be something conflicting with the phone app (old configuration files of some sort, which it sounds like).
If youre using a custom rom of some sort, try clearing everything in recovery.
Cheers.
Anthropostar said:
Are you talking about the default firmware from samsung, or a custom rom?
If the update came over the air (OTA), you might just want to get back to factory settings.
There might be something conflicting with the phone app (old configuration files of some sort, which it sounds like).
If youre using a custom rom of some sort, try clearing everything in recovery.
Cheers.
Click to expand...
Click to collapse
Im talking about stock ICS.
On stock ICS or even CM 9 which is ICS also, everything works perfect.
If I install stock JB, or CM 10(or 10.1/.2/11) I wouldn't be able to make calls.
Bei60 said:
Im talking about stock ICS.
On stock ICS or even CM 9 which is ICS also, everything works perfect.
If I install stock JB, or CM 10(or 10.1/.2/11) I wouldn't be able to make calls.
Click to expand...
Click to collapse
Have you tried clearing everything <data+cache+dalvik> before flashing any other rom?
On stock try going back to factory settings.
Im unable to guess why you can recieve calls but not make 'm.
You might want to try flashing a newer kernel, but that shoulnd be needed as all roms come with their own kernel.
- Go into recovery; clear everything, clear dalvik cache, flash <recent> rom, try again.
Cheers.
Anthropostar said:
Have you tried clearing everything <data+cache+dalvik> before flashing any other rom?
On stock try going back to factory settings.
Im unable to guess why you can recieve calls but not make 'm.
You might want to try flashing a newer kernel, but that shoulnd be needed as all roms come with their own kernel.
- Go into recovery; clear everything, clear dalvik cache, flash <recent> rom, try again.
Cheers.
Click to expand...
Click to collapse
I can receive calls. I can't MAKE ones.
And I've done all of the above.
Guess there's something wrong with my SIM that is blocking me from making calls because I have tried 3 other SIM cards from the same and different networks and they all work fine.
I'll just have mine changed.
Has dad payed his bill
Sent from my GT-N7000
colindodds said:
Has dad payed his bill
Sent from my GT-N7000
Click to expand...
Click to collapse
Can anyone who is not a spammer help me maybe?
I would try flashing a another modem.
Try phoning: *#*#4636#*#* and then go to "phone information". Make sure everything is correct, you may have to google some of the terms.
Related
using fitsnugly latest (as of yesterday) and was trying to applying a morph. it froze up in the middle of applying it and i had to pull the battery. since then i have not been able to send or receive text messeges. i don't have a nandroid because i've had too many problems with them and it's just as quick to use tb for backing everything up.
in any case, i've wiped everything possible, tried different recoveries, different roms, gingerbread, froyo, etc....cannot send sms. maybe i'm missing something simple but if someone can offer another way of wiping that might cover something i've missed i would love to hear about it.
Flash the latest rom again n see if it works
Sent from my Nexus One using XDA App
thanks, but like i said i've already tried that. i need to wipe something that's not getting wiped in recovery
well after some serious stressing i put in a new sim card that i've had and everything is up and running fine now.
mods, please close this thread
When I install an new ROM, phone only can call out, cann't call in.
Seems install stock ROM then the first time flash 2.3 ROM, phone can call in and out.
muziling said:
When I install an new ROM, phone only can call out, cann't call in.
Seems install stock ROM then the first time flash 2.3 ROM, phone can call in and out.
Click to expand...
Click to collapse
MODS PLEASE MOVE TO HERO CDMA Q AND A SECTION....
...as for an answer....first answer a few questions and then i can help
what radio?
what prl?
what rom?
what extra "mods/tweaks" did you do/you're currently using?
what carrier?
kifno said:
MODS PLEASE MOVE TO HERO CDMA Q AND A SECTION....
...as for an answer....first answer a few questions and then i can help
what radio?
what prl?
what rom?
what extra "mods/tweaks" did you do/you're currently using?
what carrier?
Click to expand...
Click to collapse
radio: 2.42.02.10.29.zip
PRL: 2.20_003
ROM: aospCMod-HC-20110421-signed.zip
no tweaks
carrier: china telecom
try this:
look up on your search engine how to update to the latest prl and pri
then i'd also like for you to try a sense rom, a froyo rom, and cm7.0.2
then i'd like for you to tell me what was the last working rom you used that it worked on?
i have to know this information to help you as best as possible b/c right now there are a broad amount of solutions
kifno said:
try this:
look up on your search engine how to update to the latest prl and pri
then i'd also like for you to try a sense rom, a froyo rom, and cm7.0.2
then i'd like for you to tell me what was the last working rom you used that it worked on?
i have to know this information to help you as best as possible b/c right now there are a broad amount of solutions
Click to expand...
Click to collapse
Last working rom is aospCMod-20110310-signed.zip
I update to aospCMod-HC-20110421-signed.zip last night, and phone call in problem happend, Now I flash Sprint_2.1(2.32.651.2), It works.
muziling said:
Last working rom is aospCMod-20110310-signed.zip
I update to aospCMod-HC-20110421-signed.zip last night, and phone call in problem happend, Now I flash Sprint_2.1(2.32.651.2), It works.
Click to expand...
Click to collapse
Hmp, stick with a rom that works THAT YOU LIKE, not by what I tell you. But did you try these rom's?
- CM v7.0.2?
- GingerSense?
- AOSP 0.9.9.2 Froyo?
- CM6.1-RC2?
- NFX Stock Rom?
- My Sense Roms?
Try all of those and for whichever the phone calls work, take note of that. And then also I'd like for you choose what you like the best. Also did you try the update prl/pri on a sense rom? Try doing it on the rom you're on now
And glad to see it worked for ya bud
muziling said:
Last working rom is aospCMod-20110310-signed.zip
I update to aospCMod-HC-20110421-signed.zip last night, and phone call in problem happend, Now I flash Sprint_2.1(2.32.651.2), It works.
Click to expand...
Click to collapse
FYI the functionality of the dialer is hard-coded into the phone, not each ROM, so if it works at all, it works. Sometimes phone and data issues can be solved by updating PRL and profile as suggested, but it sounds like your issue may have been simply your carrier at the time. If a phone can call out, it can call in, and vice versa. It may have something to do with the fact that you are flashing Sprint ROMs for a Chinese carrier, but who knows. There are a few members in these forums that are on your same chinese carrier and are running aospCMod without issue, one member in particular is called "oldghost", maybe you should PM him and see if he has had any issues, and what ROM best suits the needs of the Chinese version of the heroC. Good luck.
il Duce said:
FYI the functionality of the dialer is hard-coded into the phone, not each ROM, so if it works at all, it works. Sometimes phone and data issues can be solved by updating PRL and profile as suggested, but it sounds like your issue may have been simply your carrier at the time. If a phone can call out, it can call in, and vice versa. It may have something to do with the fact that you are flashing Sprint ROMs for a Chinese carrier, but who knows. There are a few members in these forums that are on your same chinese carrier and are running aospCMod without issue, one member in particular is called "oldghost", maybe you should PM him and see if he has had any issues, and what ROM best suits the needs of the Chinese version of the heroC. Good luck.
Click to expand...
Click to collapse
Yes oldghost uses a Chinese carrier and I don't think he had any issues at all. But first try updating the prl/pri
Interesting. I just realized I'm seeing similar since (I think) flashing 4/29 aosp 2.3.3. Thought I had just messed up on a setting or something. Incoming calls are going straight to voicemail. I see them almost immediately in the call log on the phone, but no ring or any other indication. The only other record of the call would be the voicemail notification after a bit.
Now, my assumption here is that I messed up on my last flash, so I'll go back and do a redo, including going back to a sense rom just in case.
I was coming from 4/21 aosp 2.3.3. Before the 4/21, I did get rid of firerats, installed fresh, updated prl (now at 60678) and profile, though I think that's been current for me for a while.
I then installed 4/21 from scratch (fr 110/4).
Radio has been current.
4/29, I just wiped caches and flashed over.
Like I said, I'm sure I just messed up at one of these points. I don't know for sure when I stopped receiving calls. I don't get a lot of them, so it took me a while for the loneliness to kick in. It IS possible that I messed up on the 4/21 even.
hareofthedog said:
Interesting. I just realized I'm seeing similar since (I think) flashing 4/29 aosp 2.3.3. Thought I had just messed up on a setting or something. Incoming calls are going straight to voicemail. I see them almost immediately in the call log on the phone, but no ring or any other indication. The only other record of the call would be the voicemail notification after a bit.
Now, my assumption here is that I messed up on my last flash, so I'll go back and do a redo, including going back to a sense rom just in case.
I was coming from 4/21 aosp 2.3.3. Before the 4/21, I did get rid of firerats, installed fresh, updated prl (now at 60678) and profile, though I think that's been current for me for a while.
I then installed 4/21 from scratch (fr 110/4).
Radio has been current.
4/29, I just wiped caches and flashed over.
Like I said, I'm sure I just messed up at one of these points. I don't know for sure when I stopped receiving calls. I don't get a lot of them, so it took me a while for the loneliness to kick in. It IS possible that I messed up on the 4/21 even.
Click to expand...
Click to collapse
Try troubleshooting the problem by doing the following things one at a time to see if they work:
- Try a different radio that works for the SPRINT HERO CDMA ONLY (else you will brick your phone, if you need help finding radios let me know)
- Try without firerat's
- Try wiping everything using the latest official clockwork mod 3.0 after backing up everything
- Try s0be's kernel
- Try the official CM7 v7.0.2
i can come up with more options for you to try one by one but that should last you for about an hour or so
after doing all those let me know what happens
Actually, got this working again.
flashed aosp 2.3.3 4/29 clean, removed firerats, etc (since my next step would have been to put on a sense rom).
clean install seemed to fix the problem. Able to receive calls.
then for fun... did the full factory reset and wipe wipe wipe again, installed this time WITH firerats (100 20), bumped the cache size for the hell of it.
That worked as well. Calls being received. I think something just got hosed, or my original 4/29 install, which was just a cache wipe and flash over, didn't go so well.
Still figure it was user error on my part somewhere along the line, but all is well for me now.
hareofthedog said:
Actually, got this working again.
flashed aosp 2.3.3 4/29 clean, removed firerats, etc (since my next step would have been to put on a sense rom).
clean install seemed to fix the problem. Able to receive calls.
then for fun... did the full factory reset and wipe wipe wipe again, installed this time WITH firerats (100 20), bumped the cache size for the hell of it.
That worked as well. Calls being received. I think something just got hosed, or my original 4/29 install, which was just a cache wipe and flash over, didn't go so well.
Still figure it was user error on my part somewhere along the line, but all is well for me now.
Click to expand...
Click to collapse
Glad to see its working now. If you need any more help feel free to PM me or post again in the q n a forum and the community and myself will gladly answer your question asap.
same problem with hareofthedog, strange, phone can't call in ,but call log has call-in logs..Do I can use some command to print kernel logs?
flash cm7.02, now phone can call in
muziling said:
same problem with hareofthedog, strange, phone can't call in ,but call log has call-in logs..Do I can use some command to print kernel logs?
flash cm7.02, now phone can call in
Click to expand...
Click to collapse
if a rom isn't broke, don't fix it...stick with gingerbread, its fresh out the oven
but seriously if cm7 works, then use it. unless if you really don't like cm7....but i doubt that..i hope
Hello, I'm using Semaphore + CM10 JB for few weeks (installed with your support).
However I have a problem. The stability. My phone likes to resets byself, even few times per day. It happens irregularly. What's interesting, sometimes phone resets to the CWM. Sometimes resets and backs to work, sometimes totally offs the phone (and i need to pull out the battery) or freeze on cyanogenmod start screen (but not on normal start, only when resets)
Sometimes it happens when i'm using the phone, sometimes not. He likes to do that when i'm sleeping (for example, goes to the CWM and discharge the battery by whole night on full bright).
And much smaller, but maybe important issue: when the phone starts, shows the message Warning! A problem was detected with your device. Your device IMEI number is invalid. And invalid IMEI number could cause network issues including the inability to call emergency numbers.
Firstly I installed CM10, i had the problems with the network, but after @xsenman's help (reinstall with older ROM before flashing CM10) everything works correctly and i can see IMEI too. I made an EFS backup in that old ROM, should i use that? This message doesn't intrude me, but i'm just thinking if this could be connected with reseting problems. My SGS works really nice, but that one issue is really annoying.
100 views and really no one can help?
Come on, i feel so lonely
I'd recommend flashing a clean GB stock, restoring your IMEI, flashing CM9 twice and then flashing CM10 ROMs (if you want them lol). Always be sure that you wipe your phone after installs.
Sent from my Gameboy Color
thanks for your answer. However, maybe it's not a ROM problem? Maybe some application makes an issue. Is there any log where i can check that?
That IMEI stuff definitely isn't app-caused. I can only repeat my statement above. Don't worry about data, you can backup everything using Titanium Backup and SMS Backup+.
Btw: What ROM are you on?
Best regards
Sent from my Gameboy Color
True, IMEI not, but it's not a real issue for me. Actually, i'm absolutely satisfied of my i9000 (maybe flashlight absence, but it's hardware). Everything works fine, but reseting problem makes me nervous when I use the phone as car dvr or for endomondo ect.
I use Cyanogenmod 10, one of october's nightly versions.
So basically you don't want to change anything but you want us to help you? Sorry, that's not the way a community works.
You didn't understand me. My problem is phone reseting. I want to find the reason of the issue. Because without it, i can install new software and still have the same problem.
przemek211 said:
You didn't understand me. My problem is phone reseting. I want to find the reason of the issue. Because without it, i can install new software and still have the same problem.
Click to expand...
Click to collapse
Since when has this problem occurred? I doubt an app makes a phone reset itself.
Edit: I looked around your post history and you seem to have posted in the semaphore thread. Maybe something is wrong with the kernel?
Sent from my GT-I9000
Thanks for your answer. It's hard to say because I've flash a ROM and out of hand I installed the applications. It's the worst type of problems, because it doesn't happen instantly or regularly. Actually since i wrote the topic, i didn't see the problem, however i saw two-three times the attention about IMEI, so i think, the phone resets, but not seen.
/// amerkiller: you are using i9000 too, could you recommend me any other ROM? Probably I will need to install a ROM and wait, two-three days and check if the ROM makes any issues.
/// maybe, but how can i check it? It looks like work nice, my question in Semaphore's thread was about the features
I use Remics-JB, you can try it out if you want a Samsung touchwiz feel, and apps from the S3.
Slimbean if you want a minimalist ROM.
Hopefully, the problem will disappear.
Powodzenia
Edit: regarding the kernel, you can flash Devil and see if the problem persists.
Sent from my GT-I9000
So I will try Devil + Slimbean, thank you
amerkiller1995 said:
Powodzenia
Click to expand...
Click to collapse
Poles everywhere?
pozdrawiam
BlueFlame4 said:
I'd recommend flashing a clean GB stock, restoring your IMEI, flashing CM9 twice and then flashing CM10 ROMs (if you want them lol). Always be sure that you wipe your phone after installs.
Sent from my Gameboy Color
Click to expand...
Click to collapse
Ok, so i want to reflash my i9000. So - i have JVU's gingerbread ROM, is that correct stock ROM? Should i make the WIPE here? I'm not sure about restoring IMEI. Should i do that in GB's temporary ROM or (as I think) later in JB's? Of course, earlier I need to backup the efs folder with IMEI so i think i should do that in GB's and restore it in CM10 (or in Slimbean which I want to test). And one more doubt. You said flashing CM9 twice. Why is that? And how can I do that if i'm installing the ROM in CWM?
przemek211 said:
Ok, so i want to reflash my i9000. So - i have JVU's gingerbread ROM, is that correct stock ROM? Should i make the WIPE here? I'm not sure about restoring IMEI. Should i do that in GB's temporary ROM or (as I think) later in JB's? Of course, earlier I need to backup the efs folder with IMEI so i think i should do that in GB's and restore it in CM10 (or in Slimbean which I want to test). And one more doubt. You said flashing CM9 twice. Why is that? And how can I do that if i'm installing the ROM in CWM?
Click to expand...
Click to collapse
You can find tutorials about flashing to stock.
http://forum.xda-developers.com/showthread.php?t=1102881
Flashing the stock ROM will recover your IMEI number if you currently don't have it and will wipe your personal files. Backup your IMEI while you're on GB and if you lose it, then restore it. Fyi I never lost my IMEI, it's not common. You should flash JB / cm10 twice, ICS/cm9 should be okay after one flash. Remember to wipe if the instructions say so.
When you'll attempt to flash cm10 in recovery, you'll get a warning about partition change. You'll have to chose to flash second time, this time it should work and the phone will reboot into a bootloop. Pull out the battery and enter recovery and flash cm10 again. This time it well install and reboot successfully.
Sent from my GT-I9000
It's everything working nicely? Asking out of curiosity.
Sent from my GT-I9000
Hi, thanks for your interest
Two days ago I made a re-flash Stock > CWM > CM9 (twice) > CM10
Attention about IMEI doesn't longer appear
I've installed apps. The phone has resets for a one time when I was using some app. It is not a big problem for me if SGS makes that from time to time (maybe some apps are not adapted to the JB very well). However today I used him to record my drive (dailyroads voyager) and when i tried to stop the recording, he doesn't backs to life (just I needed to pull the battery out) and video file was corrupted. But when I was getting back to home it worked correctly. I have no idea why that's happen.
przemek211 said:
Hi, thanks for your interest
Two days ago I made a re-flash Stock > CWM > CM9 (twice) > CM10
Attention about IMEI doesn't longer appear
I've installed apps. The phone has resets for a one time when I was using some app. It is not a big problem for me if SGS makes that from time to time (maybe some apps are not adapted to the JB very well). However today I used him to record my drive (dailyroads voyager) and when i tried to stop the recording, he doesn't backs to life (just I needed to pull the battery out) and video file was corrupted. But when I was getting back to home it worked correctly. I have no idea why that's happen.
Click to expand...
Click to collapse
Restarts shouldn't happen that was some unusual circumstance. The video problem is weird, post here if it happens again, lets hope its just bad luck.
Ok, I'll look on it.
I have one other question and maybe you will know.
Call recording. There are two options for use this feature. Simple MIC recording apps and 'two-way call recording' which is much better, however it needs kernel with handle of it. I didn't find anyone for SGS, so I want to use MIC recording. There are many apps in Google Play. However any of them makes 0kB files of record on JB's CM10. When I was using gingerbread it didn't worked too however files were good, but the second side of call didn't hear me.
przemek211 said:
Ok, I'll look on it.
I have one other question and maybe you will know.
Call recording. There are two options for use this feature. Simple MIC recording apps and 'two-way call recording' which is much better, however it needs kernel with handle of it. I didn't find anyone for SGS, so I want to use MIC recording. There are many apps in Google Play. However any of them makes 0kB files of record on JB's CM10. When I was using gingerbread it didn't worked too however files were good, but the second side of call didn't hear me.
Click to expand...
Click to collapse
In regards to two way recording, i don't think it's solved...
http://forum.xda-developers.com/showthread.php?t=863074&page=38
I never needed that feature, so i won't be much help, try different apps and remember some apps are on XDA, not only the play store.
Sent from my GT-I9000
I saw that, but it is only for Froyo, when i installed it into gingerbread i needed to re-flash my SGS
I tried a lot of apps, however it looks like being locked (if worked they made 0kB files)
Sprint Nexus 5 users, the Lollipop update gives us a ridiculous number of custom ROMs to choose from.
This thread is meant to keep a list of custom ROMs that work without having to apply the sprint.zip fix.
If you use Sprint, please share your Lollipop ROMs that have working data. It will save users some time and mild annoyances.
(I am a bit of a control freak and hate having anything crash on my phone, and sprint.zip breaks PRL and update Profile, but hey we get working LTE, easy trade)
Old list from http://forum.xda-developers.com/google-nexus-5/general/fix-sprint-data-to-custom-roms-t2541924
CM11 based Roms
Cataclysm
Slimkat
Nitrous
Kangakat
Beergang
Lollipop ROMs:
Pure White
XtraSmooth
Pure white works flawlessly
xtrasmooth works without a hitch after prl/profile update
Cataclysm works on lollipop
Optipop works fine. But options to update PRL and Profile are missing.
Not sure if this fix would help me out or if there is another solution for this. I have voice and text but no data. I'm on Sprint. Any help would be greatly appreciated.
gizmosears said:
Not sure if this fix would help me out or if there is another solution for this. I have voice and text but no data. I'm on Sprint. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Which ROM are you running?
freshlysqueezed said:
Which ROM are you running?
Click to expand...
Click to collapse
Right now I'm running Cataclysm. I've had this issue with Stock and Xtreme also.
gizmosears said:
Right now I'm running Cataclysm. I've had this issue with Stock and Xtreme also.
Click to expand...
Click to collapse
Cataclysm already has sprint APN. I had a similar problem and cleaning the sim card worked for me.
I would try the following:
1. I would try updating prl then profile in carrier settings.
If that doesn't work, power down and remove the sim card, wipe it down real well with a cotton cloth, reinsert, power on, and update prl and profile.
2. If that doesn't work, reinstall any stock based rom after a clean wipe, go through the initial setup , update prl, profile.
3. If all fails, get a new sim card.
freshlysqueezed said:
Cataclysm already has sprint APN. I had a similar problem and cleaning the sim card worked for me.
I would try the following:
1. I would try updating prl then profile in carrier settings.
If that doesn't work, power down and remove the sim card, wipe it down real well with a cotton cloth, reinsert, power on, and update prl and profile.
2. If that doesn't work, reinstall any stock based rom after a clean wipe, go through the initial setup , update prl, profile.
3. If all fails, get a new sim card.
Click to expand...
Click to collapse
Thanks for trying to help but this is what's confusing me. I've tried all that you just suggested and this is the second new sim card I've tried.
Sorry, that sucks.
Perhaps try a completely fresh start with a factory image, and go through the initial setup in a different location (different cell tower).
Anyone have a suggestion for newer roms with working data, besides stock based.
I, for the life of me, cannot solve this issue. No matter the 8.x ROM I use (and I have used 5 at this point) if I receive a call during another call and try to take it (call waiting) both connections are immediately hung up.
Similarly if I try to merge calls and create a conference call, all calls are hung up.
I have tried: stock GAPPs vs nano GAPPs. AOSP dialer vs Google dialer from the store. I've tried virtually every phone app setting and default configuration and whatnot and it just won't work!
I always flash ROMs the same way - wipe eveyrthing except internal, flash ROM, flash GAPPs, and then no restore from backup - I download all my apps individually. Everything else runs perfectly.
Anyone else on Verizon having this issue? Or anyone on Verizon NOT having this issue?
Also... any ideas on how to fix it?
Videoword said:
I, for the life of me, cannot solve this issue. No matter the 8.x ROM I use (and I have used 5 at this point) if I receive a call during another call and try to take it (call waiting) both connections are immediately hung up.
Similarly if I try to merge calls and create a conference call, all calls are hung up.
I have tried: stock GAPPs vs nano GAPPs. AOSP dialer vs Google dialer from the store. I've tried virtually every phone app setting and default configuration and whatnot and it just won't work!
I always flash ROMs the same way - wipe eveyrthing except internal, flash ROM, flash GAPPs, and then no restore from backup - I download all my apps individually. Everything else runs perfectly.
Anyone else on Verizon having this issue? Or anyone on Verizon NOT having this issue?
Also... any ideas on how to fix it?
Click to expand...
Click to collapse
Reflash modem or baseband
https://forum.xda-developers.com/ne...-nexus-6-recovery-flashable-fastboot-t3066052
HueyT said:
Reflash modem or baseband
https://forum.xda-developers.com/ne...-nexus-6-recovery-flashable-fastboot-t3066052
Click to expand...
Click to collapse
I'll give it a go, do I need to reflash rom with it?
Everything else about the dialer works...
HueyT said:
Reflash modem or baseband
https://forum.xda-developers.com/ne...-nexus-6-recovery-flashable-fastboot-t3066052
Click to expand...
Click to collapse
Just an update, this did not work.
Any ideas out there?