Hi,
I was wondering if anyone has faced this problem before.
I was charging my phone and listening to some music simultaneously using an aux cable in my car. As soon as I removed the aux cable and the charger, the call display changed into some weird language or symbols(I could not understand any of it). The dialer page, call log page, favorites page and contacts page were not readable. It was some sort of symbolic language which was very hard to understand. I am using the matrix live wallpaper. The symbols were something like those that fall in the wallpaper. Everything else on the phone was fine including messaging, internet, playstore etc. I already posted another problem which I was facing because of the charger. I'm not sure whether I should change the car charger or not use one at all. It's a 1 A capdase charger. If it's not a charger problem, would it have anything to do with the aux cable? Or would be a problem of using both the aux cable and the charger together?
120 views and no reply? Someone please help?
udit_narang said:
120 views and no reply? Someone please help?
Click to expand...
Click to collapse
Sorry mate, I don't want to be rude with you, but be patient, i'm sure when someone will read your post and have a clue about whats going on with your phone, he will help you. 120 views doesn't mean 120 persons ignoring you! I'm sure you prefer to have 1 good answer then 120 that are wrong.
---------- Post added at 11:54 PM ---------- Previous post was at 11:51 PM ----------
alray said:
Sorry mate, I don't want to be rude with you, but be patient, i'm sure when someone will read your post and have a clue about whats going on with your phone, he will help you. 120 views doesn't mean 120 persons ignoring you! I'm sure you prefer to have 1 good answer then 120 that are wrong.
Click to expand...
Click to collapse
and for your charger/aux cable issue, check your other post. its a very known problem that all mobile devices are facing. You need to check all ground of your audio system and maybe shield your audio system,
Related
hello there, i have a diamond with a custom wm 6.5 rom
never had problems with it..
but when i woke up this morning i noticed that my phone didnt have any backlight on it..
i've searched through the settings and it all should be ok, i even have a backlight application setting that i use to specify the power of the backlight and its set to maximum even plugged on the ac adaptor...
what could be the cause of this?
will putting a new rom fix this?
or is this a hardware error? im open to try and experiment with the phone
many thanks in advance
ok, i now have tried putting 2 new roms and the problem remains, so i might guess its a hardware problem..
is there anyone here who can guideline me to try and fix this backlight problem? i have a friend who works with that kind of stuff, wiring and etc, if i give him the instructions maybe he or i can fix this..
regards
1st post: 1st December 2009, 09:07 AM
2nd post: 1st December 2009, 09:11 AM
...
Installed and tested 2 roms is 4 minutes?
Wow!
i've tested 2 new roms before the first post, had some connection problems to try and post the first message, as soon as i got through, i send the 2nd message with the info i forgot to post on the first message...
as i searched through the web, i see this is a really common problem on the diamond, with no apparent easy solution, the only guys i saw that had a solution, were the ones who send the phone back to htc center for warranty repair and exchange motherboard or something
is there a alternate easy way to fix this by now?
regards
Hello,
some time ago the battery of my Diamond broke.
I thought this is not a problem and I bought a new on Amazon.
But now the Diamond no longer starts.
It vibrates but the screen stays black.
I can connect to the Coputer but it only recognizes the memory.
No operating system,can´t conect with windows device center.
What should I do?
Can i still splash the device?
Did you try to completely reset your device?
With Hard Reset?
Yes but it don´t works.
The Display stays black.
well.. uhm.. did you make sure, the display connector is really connected and not lose on some end?
What is the Display connector?
Otto Normalverbraucher said:
What is the Display connector?
Click to expand...
Click to collapse
oh my.. silly me lol.. sorry i put this post a post on some other forums upsidedown.. (wanted to answer in another tab..)
oh my.. silly me lol.. sorry i put this post a post on some other forums upsidedown.. (wanted to answer in another tab..)
Click to expand...
Click to collapse
no problem
Have someone a idea how to solve this problem?
It´s possible to copy a ready installet rom from another Diamond.
Maybe i can paste it on my Diamonds memory?
Please any one help me i buy hd2 new.After 1 month it shows charging but do not charge i change my battery but! still have the same problem if some body know how to fix it pLzZzZz help me :'( i think some1 understand my fellings
Maybe your cable is broken?
Timonno said:
Maybe your cable is broken?
Click to expand...
Click to collapse
Sir I use the Nokia usb but it did not work it show its charging but do not charges.
then change your usb
You realize you posted in the ACCESSORIES section right?
Please can anyone tell me what are middle contact i search alot for htc hd2 charging fault but finaly found fix at this link
http://forum.xda-developers.com/showthread.php?t=663102&page=2
alot of people problem have been solved but i dont know about middle contact plz help
yousufshah said:
Please can anyone tell me what are middle contact i search alot for htc hd2 charging fault but finaly found fix at this link
http://forum.xda-developers.com/showthread.php?t=663102&page=2
alot of people problem have been solved but i dont know about middle contact plz help
Click to expand...
Click to collapse
If you remove your battery, there are three pieces of metal that connect to the three battery contacts. The center one is what is being referred to as "middle contact". The metal gets bent out of place and the battery does not connect to the phone properly. Inspect them to make sure they are all aligned and straight.
Hi
I bought that ; http://www.ebay.com/itm/LCD-Touch-D...102?pt=LH_DefaultDomain_0&hash=item4602f56036
once I installed all the pieces, I restart the cell. It starts, I can hear sound, but no image on the actual screen. What could I do wrong? Does anyone has a video? All I can find on youtube is a video of how to disassembled it but never how to change the digitizer.
Thx for ur help!
SoapShoeS said:
Hi
I bought that ; http://www.ebay.com/itm/LCD-Touch-D...102?pt=LH_DefaultDomain_0&hash=item4602f56036
once I installed all the pieces, I restart the cell. It starts, I can hear sound, but no image on the actual screen. What could I do wrong? Does anyone has a video? All I can find on youtube is a video of how to disassembled it but never how to change the digitizer.
Thx for ur help!
Click to expand...
Click to collapse
just make sure the flex cables are plugged all the way in.... if the lcd plug is just barely off it will not work...if all are plugged in it should work... there is a chance the part could be bad..(it does happen) if so just return it for another.... but the best advice is check the connections... dont force them... but unplug and replug them... anything that has to be forced is wrong and will cause damage if you force it...
no real need for a video as with the part you have shown is a pretty simple remove a few screws and unplug connections... also inspect the flex cables on the new unit... one small nick in the lcd one and it also could cause this...
hope this helps...
kawgirlval69 said:
just make sure the flex cables are plugged all the way in.... if the lcd plug is just barely off it will not work...if all are plugged in it should work... there is a chance the part could be bad..(it does happen) if so just return it for another.... but the best advice is check the connections... dont force them... but unplug and replug them... anything that has to be forced is wrong and will cause damage if you force it...
no real need for a video as with the part you have shown is a pretty simple remove a few screws and unplug connections... also inspect the flex cables on the new unit... one small nick in the lcd one and it also could cause this...
hope this helps...
Click to expand...
Click to collapse
Thx for ur help.
I tought that maybe it had something else to swap or something.
I already sent back one digitizer to the sender cauz the other one wasn't working... So my guest was that if a second one didn't work I was probably the problem but seem not...
When I reinstalled my old (and broken) screen its work like a charm.
Anyway thx for ur help I'll try to reinstall it
Moved To Q&A
Please post questions in the Q&A section
Hi everyone! I am new around here , as a user, but i visit this forum every day.
Just compliments for you guys!
Your tutorials helped me many times, your ROMs got my phone alive and lot of other things.
But now, it happened to appear a problem that seems to be impossible to fix.
As the title sais, the problem is that the soft keys aren't working anymore.
I flashed Gingerbread and ICS official firmwares with Smart FlashTool but they didn't solved the problem.
I ran a keytest in CWM and they work fine.
in the log appears that each key command equals to 0 while the touchscreen touches equals to some strange numbers like 63738291.
the commands also work on gingerbread when the phone is plugged in,and even then the whole touchscreen goes crazy.
So, i don't think is a hardware problem.
I found sort of a solution of editing a database in an internal folder /data/data/com.android.providers.settings/databases/settings.db , but i don't know how to edit it.
Can someone help me?
Does anywone have the fix of this?
Right know i am using SlimBean with Navigation bar, but is frustrating that i can't use the main keys.
Is about Menu, Home, Back and Search keys.
Excuse me for my bad english, i from RO.
Also, if i am posting this in the wrong section.
Thank you!
having the same problem sometimes ... usually outdoors when the temp is under 20C ... indoors are working fine BUT outdoors (example: in a car ) when I plug in the charger are the soft key working fine, til I remove the charger.
I think my problem is about remapping. They work in CWM key test and show 0! Can someone help meee?!?!
Browsing the threads for an answer to my problem... same (or very similar to the one here)... could Admin please check this and see if this is same issue as here:
http://forum.xda-developers.com/showthread.php?t=2516931
Maybe merge these threads and look for a solution together?
---------- Post added at 01:35 PM ---------- Previous post was at 01:30 PM ----------
Laizk said:
having the same problem sometimes ... usually outdoors when the temp is under 20C ... indoors are working fine BUT outdoors (example: in a car ) when I plug in the charger are the soft key working fine, til I remove the charger.
Click to expand...
Click to collapse
You posted this a while ago... but did you ever find a solution?
Manny Avatar said:
Browsing the threads for an answer to my problem... same (or very similar to the one here)... could Admin please check this and see if this is same issue as here:
http://forum.xda-developers.com/showthread.php?t=2516931
Maybe merge these threads and look for a solution together?
---------- Post added at 01:35 PM ---------- Previous post was at 01:30 PM ----------
You posted this a while ago... but did you ever find a solution?
Click to expand...
Click to collapse
no still nothing, but I'm not in a hurry anymore as I got myself a new phone ... now it's just waiting for a fix then I could give it to someone else
Yeah..Mine too is not working..On charging point it seems to be working fine but after that It stops...
---------- Post added at 11:20 AM ---------- Previous post was at 11:19 AM ----------
Same here bro....Any Solution ??
See this... http://forum.xda-developers.com/show...php?p=53032940
Home, Search, back keys not working
These keys on my LG Optimus black have completely stopped working. Phone unusable (unless I reboot after every action). ANy help ? Is there a software substitue for these keys ??
Use softkey enabler app