actually the touch of my phone (Motorola milestone) stop responding only the left bottom corner
and then sometimes it works on its own .The shop keeper told me that its touch needed to be replaced
and they are not able to find it ..plz help
give me suggestions
waiting
I was able to find a digitizer for my droid on EBay and found a video online showing the installation procedure. Give it try and see if you can find one there.
before buying the digitizer please make sure it isn't:
-bad software flash
-bad flex cable
-static electricity on your hand / clothes
Those may sound stupid but give them a try
thanks you sir for replying.and i have checked my cell by shop thy said its touch...and before flashing its doing problem
can any body send me some link to order 1 piece if digitizer ( touch ) plz let me know
pblm solved //got digitizer through ebay
mod close this thrread plzzzzz
Hi
I bought that ; http://www.ebay.com/itm/LCD-Touch-D...102?pt=LH_DefaultDomain_0&hash=item4602f56036
once I installed all the pieces, I restart the cell. It starts, I can hear sound, but no image on the actual screen. What could I do wrong? Does anyone has a video? All I can find on youtube is a video of how to disassembled it but never how to change the digitizer.
Thx for ur help!
SoapShoeS said:
Hi
I bought that ; http://www.ebay.com/itm/LCD-Touch-D...102?pt=LH_DefaultDomain_0&hash=item4602f56036
once I installed all the pieces, I restart the cell. It starts, I can hear sound, but no image on the actual screen. What could I do wrong? Does anyone has a video? All I can find on youtube is a video of how to disassembled it but never how to change the digitizer.
Thx for ur help!
Click to expand...
Click to collapse
just make sure the flex cables are plugged all the way in.... if the lcd plug is just barely off it will not work...if all are plugged in it should work... there is a chance the part could be bad..(it does happen) if so just return it for another.... but the best advice is check the connections... dont force them... but unplug and replug them... anything that has to be forced is wrong and will cause damage if you force it...
no real need for a video as with the part you have shown is a pretty simple remove a few screws and unplug connections... also inspect the flex cables on the new unit... one small nick in the lcd one and it also could cause this...
hope this helps...
kawgirlval69 said:
just make sure the flex cables are plugged all the way in.... if the lcd plug is just barely off it will not work...if all are plugged in it should work... there is a chance the part could be bad..(it does happen) if so just return it for another.... but the best advice is check the connections... dont force them... but unplug and replug them... anything that has to be forced is wrong and will cause damage if you force it...
no real need for a video as with the part you have shown is a pretty simple remove a few screws and unplug connections... also inspect the flex cables on the new unit... one small nick in the lcd one and it also could cause this...
hope this helps...
Click to expand...
Click to collapse
Thx for ur help.
I tought that maybe it had something else to swap or something.
I already sent back one digitizer to the sender cauz the other one wasn't working... So my guest was that if a second one didn't work I was probably the problem but seem not...
When I reinstalled my old (and broken) screen its work like a charm.
Anyway thx for ur help I'll try to reinstall it
Moved To Q&A
Please post questions in the Q&A section
Hi guys,
I hope this thread is in the right place but I have a question.
My usb charge port got bent a little bit and I had trouble charging my phone so I ordered from eBay the part I needed which is this thingy
http://i.ebayimg.com/t/New-USB-Charger-Port-Flex-Cable-Replacement-For-Samsung-Galaxy-Note-N7000-i9220-/00/s/NTAwWDUwMA==/z/4msAAOxyMxpRpE~d/$(KGrHqMOKpYFGWfj3M)VBRpE+d(Spw~~60_12.JPG
and then when I got it I installed it according to an excellent guide I found on youtube.
When I installed it,the USB charge port came back to life but the microphone (which I late found out was attached to the same flex part) was broken so I had to use my speaker for two weeks until the seller shipped the part again.
Today I installed the part again and now the USB charge port works fine,the microphone works fine,but to my supprise - the speaker doesn't!
My question is :
1.is the speaker also connected to this part and due to that I have this problem or is it possible that something else went wrong ?
Please only answer if you're sure of what you say.
2.Where can I get this part (OEM) from a place that will surely send a working part ? (if it's not possible to write it down here, please PM me)
Thank to all you helpers out there!!!
Double post and in the wrong section, please flag to the mods and get this closed.
Sent from my GT-N7000 using XDA Premium 4 mobile app
beniferg said:
Hi guys,
I hope this thread is in the right place but I have a question.
My usb charge port got bent a little bit and I had trouble charging my phone so I ordered from eBay the part I needed which is this thingy
http://i.ebayimg.com/t/New-USB-Charger-Port-Flex-Cable-Replacement-For-Samsung-Galaxy-Note-N7000-i9220-/00/s/NTAwWDUwMA==/z/4msAAOxyMxpRpE~d/$(KGrHqMOKpYFGWfj3M)VBRpE+d(Spw~~60_12.JPG
and then when I got it I installed it according to an excellent guide I found on youtube.
When I installed it,the USB charge port came back to life but the microphone (which I late found out was attached to the same flex part) was broken so I had to use my speaker for two weeks until the seller shipped the part again.
Today I installed the part again and now the USB charge port works fine,the microphone works fine,but to my supprise - the speaker doesn't!
My question is :
1.is the speaker also connected to this part and due to that I have this problem or is it possible that something else went wrong ?
Please only answer if you're sure of what you say.
2.Where can I get this part (OEM) from a place that will surely send a working part ? (if it's not possible to write it down here, please PM me)
Thank to all you helpers out there!!!
Click to expand...
Click to collapse
Open up the phone again. and check the screws that hold down the usb port
the speaker is attached to the plastic cover on top of the usb port. it is not making contact with the right points.
try it whilst the phone is on, play a audio or video file and hold down that part with your fingers. u will see that it will work.
meaning that the screws are either loose or too tight and not properly aligned.
4llerbuntu said:
Open up the phone again. and check the screws that hold down the usb port
the speaker is attached to the plastic cover on top of the usb port. it is not making contact with the right points.
try it whilst the phone is on, play a audio or video file and hold down that part with your fingers. u will see that it will work.
meaning that the screws are either loose or too tight and not properly aligned.
Click to expand...
Click to collapse
DUDE - You have no idea how right you are!
so many people told me so many different things but you got this right on spot!
Thank you so much,solved my problem in 5 minutes!
My touch screen is having issues.. In one area about 3/4 down near the bottom across the length the screen is not responsive.. Here is a picture showing where /i62.tinypic.com/2ykn8rd.png (please add the http:/ before the link to check it)
I checked the touch with the service test
Is it a problem with the hardware? Because I haven't dropped it and there aren't any cracks..
Only thing I can think of is that my charger wire is a little frayed and that charge has seeped into the screen.. But is this damage permanent or how can I fix it ?
Any help would be much appreciated.. Thank you
Any help please?
randikag said:
Any help please?
Click to expand...
Click to collapse
Hi there, I'm sorry I couldn't find any information regarding your problem in the web and the way how to fix it. I'm suggesting you to send your phone to specialized repair center (Sony). Or you just can give a try and reflash the rom you're using, maybe it causes this problem - nobody knows until you try.
Good luck! If you're answering or anything like so, please quote the message that I'd be able to see it.
Hi, if the touch screen previously works without problem, can be an hardware damage of the touch screen panel, as you can see there is only one row that don't works, all you have to do is replace the entire LCD+Digitizer assembly, and the phone will works perfectly
This ways is for:
- When you connect the watch to the charger, it's turn on and says charging but when removing it from charger it's go black (auto poweroff)
- When you press the power button it's won't boot or go black (auto poweroff) at the "LG" screen
You need:
- Old battery
- Soldering Iron and Soldering Wire
Optional:
- 0 ohm resistance
1.Remove the sticker and plastic case on the battery protection board
Image see attachment files 1
2.Use Soldering Iron to remove the component in the image
3.Soldering 0 ohm resistance to the position of removed component or just use Soldering Wire to connect two contactor, it should be like this:
Image see attachment files 2
4.Done,now your battery should be work.
This ways is from:
tieba.baidu.com/p/4071402128 (Chinese forum, solution at the second replies)
Sorry,my English is poor and i can't find buttons to upload attachments or image to xda-developers.
I finded the buttons to upload attachment!
You can ask me if you have any other questions.
If this helped you,please click thanks button.
I will check this and will let you know if this solve my boot problem.
https://forum.xda-developers.com/g-watch-r/help/watch-shutting-removed-cradle-t3433394/page3
You are my hero of the day.
I replaced the component (what ever that may be) and the bootproblem was solved.
Thank you very much for sharing this
Do you know what the component is?
Gameboyboyboy said:
You are my hero of the day.
I replaced the component (what ever that may be) and the bootproblem was solved.
Thank you very much for sharing this
Do you know what the component is?
Click to expand...
Click to collapse
Sorry, i don't know what it is
I just found that ways from here:
tieba.baidu.com/p/4071402128 (It's a chinese forum,solution in the second replies)
It's also call it "component" , and says it's possible is a fuse
Nice post man!
I did all these steps and...... tadaaaaam BACK TO LIVE!
Mine is working to!!! Thank you very much for the solution :good:
Can someone explain what is going on here exactly? Is modifying this resistor going to make my watch potentially unsafe (eg. overcharging)? I find it really interesting that my replacement battery had the same problem as the original.
stephendt0 said:
Can someone explain what is going on here exactly? Is modifying this resistor going to make my watch potentially unsafe (eg. overcharging)? I find it really interesting that my replacement battery had the same problem as the original.
Click to expand...
Click to collapse
This may be a battery manufacturer's problem,the old "component" are broken. Just don't use charger(dock) output > 5V 1A there will not safe problem.
Excellent :good::good:
I was having this problem even after changing the new battery, I used above fix and now its working perfectly since yesterday. Thanks Again.
Hi,
I have the same issue since a few days. First of thanks for the provided solution. But because removing a potential fuse and bride the contacts doesn't sound really save to me, I want to ask if someone who has done it month ago can report that there are no issues so far.
And if someone had issues please report them, it would be much appreciated and help other people too who will find this Thread in the future.
I just wanted to say thank you!
I bridged the component with a blob of solder and half expected it to blow up in my face but it works just fine. I think I'm gonna order a new battery anyway since this one is 4 years old but this fix solved it for me!
Willy130683 said:
Hi,
I have the same issue since a few days. First of thanks for the provided solution. But because removing a potential fuse and bride the contacts doesn't sound really save to me, I want to ask if someone who has done it month ago can report that there are no issues so far.
And if someone had issues please report them, it would be much appreciated and help other people too who will find this Thread in the future.
Click to expand...
Click to collapse
If you are concerned, buy a new battery. Its cheap and quick.
A new battery has saved my G Watch R.. only 8€:good:
this also fixed my lg watch urbane that had the same issue , thanks a lot
Thank you!
Worked like a charm.
my 5 year old LG G Watch R is alive again.
Gonna order a new battery soon tho but this really did the trick
spyne82 said:
A new battery has saved my G Watch R.. only 8€:good:
Click to expand...
Click to collapse
Hi can u share the link for the 8 euro battery. Can't seem to find one nowadays
I can confirm the fix works as charm!
I really want to thank you for this amazing trick! My only hope is that whatever the piece we removed was, we don't end up with an exploding battery on our wrists! ?
Here is a Link .
It's on eBay Germany.
Between it's now for 15.99€
https://m.ebay.de/itm/Smartwatch-Ak...b1992911650a68d761747ddfff474ca&ul_noapp=true
Neveark said:
This ways is for:
- When you connect the watch to the charger, it's turn on and says charging but when removing it from charger it's go black (auto poweroff)
- When you press the power button it's won't boot or go black (auto poweroff) at the "LG" screen
You need:
- Old battery
- Soldering Iron and Soldering Wire
Optional:
- 0 ohm resistance
1.Remove the sticker and plastic case on the battery protection board
Image see attachment files 1
2.Use Soldering Iron to remove the component in the image
3.Soldering 0 ohm resistance to the position of removed component or just use Soldering Wire to connect two contactor, it should be like this:
Image see attachment files 2
4.Done,now your battery should be work.
This ways is from:
tieba.baidu.com/p/4071402128 (Chinese forum, solution at the second replies)
Sorry,my English is poor and i can't find buttons to upload attachments or image to xda-developers.
I finded the buttons to upload attachment!
You can ask me if you have any other questions.
If this helped you,please click thanks button.
Click to expand...
Click to collapse
Thank you for this instructions, i was able to fix my g watch r and get it back to working. I didn't use it for quite a while, and when i wanted to use it again it started to only work when charging (similar to my lg g3 when the battery is almost dead, which i fix with a new one, second replacement).
And i decided to give this a try before buying a new battery, my thought was that i had nothing to lose... First attempt aasn't perfect, i was able to remove that little chip, but the soldering didn't went very well (i am not very talented with a sodering iron) and when i reassembled the watch it started to flash a empty battery icon and didn't charged or turned on.
So i tryed a second time and the sordering ended up much better the second time. The 2 connectors ended well connected this time and it is now working normally.
It was very helpfull and it worked much better than i expected.