Database Develop

[KERNEL][CM10] CM10 kernel for ICS bootloader (RAM hack,OC)

This kernel is no longer being updated. Please refer to kowalski kernel thread for CM10 ROMs.
Presenting CM10 kernel built from source with ramhack and OC/UV support by wkpark
Only for the new (unlocked ICS) bootloader!
This is RC's kernel, with patches by wkpark for ramhack and OC/UV. Supports OC upto 1.5 GHz.
Thanks to them for all their work. Also, thanks to pengus77 for bringing CM10 to the new bootloader
Built using my guide over here
Uses spica's HP supersonic toolchain
Works with CM10/MIUIv4 ROM on new bootloader only
Download links:
New and recommended powersaver version!
Includes pengus77's wifi drain fix (All credit to him for that)
Non-OC, to increase battery life and stability
RAM hack values 24 MB, 32 MB, 48 MB for increased smoothness
New experimental governors are absent in this ROM, which is meant to be a stable version for daily usage. The new governors have not been properly tested yet and are unlikely to be used by most of the users. They may be included in later builds after more testing. If you want to use them, flash the experimental kernel on the previous page.
This is the version recommended for daily usage. Try the 48 MB one first, and if camera gives problems, then try a lower RH value.
Download link for stable, powersaver version
Link to latest experimental version
Download link for older experimental versions
This is the link to my folder with all kernels for the new bootloader so far, in case you want to try some other version. Ramhack values are mentioned in the file names, and if it supports OC (not every phone will like OC) it is also mentioned in the file name.
Thanks to RC and wkpark, this would not be possible without them.
Warning:
I am not responsible if anything goes wrong with your phone.
If your phone does not like OC/UV, or freezes when overclocked, reduce the max frequency or dont use the OC version of the kernel.
If apps like camera give problem, try to use a version with reduced ramhack value.
To be flashed over the ROM without wiping data. Wipe only cache and dalvik cache
If you are having problems with the new kernel and wish to revert back to the stock kernel, flash your ROM again
Credits:
arcee and the rest of the CM team. Its their work it is based on
Donate to RC
wkpark for cracking the bootloader, new his patches, without which, there would be no ramhack or OC/UV
Donate to wkpark
pengus77 for bringing CM10 to the new bootloader and wifi battery drain fix.
This wouldn't be possible without him
spica1234 for his wonderful HP Supersonic toolchain
benee for his anykernel updater for star, and for all his work
Other devs for all their work (PM me if I forgot someone!)
Source: https://github.com/rugglez

Changelog:
29/12/12:
New version built with spica's supersonic HP toolchain
Integrated pengus77's latest (v3) wifi drain fix + bsod fix
27/12/12:
Experimental version released with new CPU governors (smartass v2 and hotplug), and simple I/O scheduler (default is still cfq), max frequency=1.2 GHz
Power saver version released without OC or new governors, and with pengus77's wifi battery drain fix
26/12/12:
Initial release
Max clock frequency is 1.5 GHz

Trying the 32mb oc kernel, seems ok so far, will report back any oddities,
I'm on penguss cm10.

i tested..............

Great news. Just two little questions:
- does this work with cm10.1 as well?
- are the Wifi drain patches from pengus77 included?
Regards,
Orgler

Thank u guy's! i will try new_CM10_kernel_1225_32M_OC.zip and report back!

angel_boulevard said:
i tested..............
Click to expand...
Click to collapse
And....?
orgler said:
Great news. Just two little questions:
- does this work with cm10.1 as well?
- are the Wifi drain patches from pengus77 included?
Click to expand...
Click to collapse
You could try it with cm10.1 but im not sure if it would work. Take a backup first. Wifi drain patches will be included with his permission and when he feels it is the right time (after the testing phase and all)

thanks for the hard work i think u can put like a changelog in thread and the features of kernel listed just avoid people asking same thinks all the time

included wireless.ko is the one patched by pengus? thank you in advance
edit: just checked, it's not the patched one

First impressions are good! Not much room for UV as 1ghz is already at 1000mV which is quite low already I think? But that is not important, just an observation.
Thanks Rugglez. Been waiting a while for an OC kernel on CM10 and no call bug either. This is the future for our phone I think.

I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.

zerocoolriddler said:
I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.
Click to expand...
Click to collapse
I just checked with "CPU spy" and yes it is hitting 1.5Ghz even though I have it set lower than that.

Noted. Will release 1.2 GHz and 1.4 GHz versions separately from next time
With pengus77 permission now, i'll integrate his wifi drain fix too.
Probably tomorrow
anjo88 said:
thanks for the hard work i think u can put like a changelog in thread and the features of kernel listed just avoid people asking same thinks all the time
Click to expand...
Click to collapse
Thanks for the idea, will add it.

rugglez said:
Noted. Will release 1.2 GHz and 1.4 GHz versions separately from next time
With pengus77 permission now, i'll integrate his wifi drain fix too.
Probably tomorrow
Thanks for the idea, will add it.
Click to expand...
Click to collapse
So we waiting to test

Can you put in the next update some more CPU governers and I/O scheduler?

zerocoolriddler said:
I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.
Click to expand...
Click to collapse
Same here oc set to 1.2 but it's scaling up to 1.5 seems stable anyway.
Took one pic and gallery FCed and phone soft rebooted.
With OC 32mb kernel camera and video recording is working.
Sent from my LG-P990 using xda premium

lgnd said:
Same here oc set to 1.2 but it's scaling up to 1.5 seems stable anyway.
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
I do a OC with default cm10 function and on antutu say 1200!

Sorry for being off topic. I really salute new generation of developers for optimus2x who never let us feel our main devs/modders have left. You guys are doing a fabulous job. Thanks to you all.

Gps does not working.
Tested with igo and maps.
Sent from my LG-P990 using Tapatalk 2

rugglez,
Please add pulse boost and hotplug governor. Thanks.

(Kernel)(I9100G)(3.0.80) Semaphore Kernel 1.0

Semaphore Kernel​
In this thread you may find my customized kernel 3.0.x for JB 4.2.2 rom (SlimRoms....CM10.1 and derivatives).
I hope it will be useful, and ensures better performance and battery life.
Of course, your feedback, as always, are welcome and certainly valuable
The main features are the following:
- Kernel 3.0.80
- Source Synced with latest CM changes
- Build with Custom Linaro Toolchain 4.7.4 by christopher83
- Build with Neon and -O3 Optimization
- Init.d support
- CWMR recovery
- AVS (Adaptive Voltage Scaling)
- Dynamic Fsync 1.1
- Vibrator Control ( new features from GNex )
- Optimized AES and SHA1 routines for ARM cpu architecture
- SLQB
- Optimized ARM RWSEM (read/write semaphore) algorithm
- NFS
- New RIL !!
- Very STABLE Kernel
Available CPU governors:
-Ondemand
-Interactive
-Performance
-Powersave
-Conservative
-SmartAss v2
-Lulzactive
-HYPER
-PegasusQ
-AbyssPlug
-Sakuractive
-LulzactiveW
Available I/O schedulers:
- BFQ
- CFQ
- Deadline
- Noop
- ROW
- SIO
- V(R)
Kernel Downloads for JB 4.2.2:
MOD EDIT: Link Removed
Attention this kernel work only in SlimRoms v6 or in cm10.1 rc4 and next...​
How to install the kernel:
1) Download kernel zip file to sdcard or external sdcard
2) Reboot to recovery mode
3) Flash the kernel zip file
4) Wipe cache and dalvik cache
5) Fix permissions
6) Reboot the system
Changelog
Code:
Semaphore 1.0 :
Initial stable release for new roms

Source code please...adhere to GPL...and what about Nexus kernel?

Nice stable kernel! Thx! :thumbup:
Sent from my GT-I9100G using Tapatalk 2

Wow one more from ya.............:good:

Ryuinferno said:
Source code please...adhere to GPL...and what about Nexus kernel?
Click to expand...
Click to collapse
Nexus kernel cam with OC. Maybe this is just focus in stable. (Hope so)
Sent from my GT-I9100G using Tapatalk 2

bibiner said:
Nexus kernel cam with OC. Maybe this is just focus in stable. (Hope so)
Sent from my GT-I9100G using Tapatalk 2
Click to expand...
Click to collapse
yes this kernel is a stable and battery friendly...nexus kernel is perfomance kernel with oc and other tweak =)

biagio7xD said:
yes this kernel is a stable and battery friendly...nexus kernel is perfomance kernel with oc and other tweak =)
Click to expand...
Click to collapse
As asked by Ryuinferno, source code please.

thx bro

semaphore was familiar kernel of SGS right??
i'll try then.....btw,thanks bro....

biagio7xD said:
yes this kernel is a stable and battery friendly...nexus kernel is perfomance kernel with oc and other tweak =)
Click to expand...
Click to collapse
Plz dont abandon nexus kernel. I like that kernel very much
Sent from my GT-I9100G using xda premium

biagio7xD said:
yes this kernel is a stable and battery friendly...nexus kernel is perfomance kernel with oc and other tweak =)
Click to expand...
Click to collapse
Please upload the source code!
This is not for bullying you, but kernel is released under GPL license which means you can modify it but HAVE TO provide the source code, otherwise it would be illegal and a copyright infringement.
And that wouldn't be nice in xda
Sent from my GT-I9100G using xda app-developers app

I'm guessing that this is based on Slim kernel (the only kernel now that is on 3.0.80 is Slim...and his emphasis on Slim ROM) with his modifications done in Nexus...but free of OC and UV...and as I already stated before, codeworkx already modified vibration so that it can be adjusted, plus it is based on Gnex...so what makes this exclusive? It can be tweaked with Trickster MOD even before you "added" this feature...but one thing that interest me is the new RIL...so far it is only applied on the omap4 common device tree: https://github.com/Ryuinferno/andro...mmit/0641411c681ca67a26b212538955e9e08206216d ...but not the t1 kernel source...so all AOSP ROMs should have it regardless of kernel...

Ryuinferno said:
I'm guessing that this is based on Slim kernel (the only kernel now that is on 3.0.80 is Slim...and his emphasis on Slim ROM) with his modifications done in Nexus...but free of OC and UV...and as I already stated before, codeworkx already modified vibration so that it can be adjusted, plus it is based on Gnex...so what makes this exclusive? It can be tweaked with Trickster MOD even before you "added" this feature...but one thing that interest me is the new RIL...so far it is only applied on the omap4 common device tree: https://github.com/Ryuinferno/andro...mmit/0641411c681ca67a26b212538955e9e08206216d ...but not the t1 kernel source...so all AOSP ROMs should have it regardless of kernel...
Click to expand...
Click to collapse
source is the same for nexus (cyanogen source ) i update to 3.0.80 with cherry--pick by fancykernel github....

It is still not sufficient...even your Nexus kernel repo is not updated...you must at least point out what is the difference or cherry picks...keeping a Linux kernel as proprietary software is illegal...

[KERNEL]elementaryKernel v1.4

This month I created a new kernel to compensate for the lost stability in Badass, and I thought it would be nice to share it with you.
Based on the original 2.6.35 source from Samsung OpenSource Software, this kernel is cleaner than Badass, without unnecessary hybrid updates and risky mods.
Features:
3-step Undervolted
Brain F*ck Scheduler 0.413 with O(1) complexity instead of O
UltraKSM 0.122
Sweep2Wake
DoubleTap2Wake (on the upper half of the screen)
DoubleTap2Play/Pause (on the lower half of the screen)
DoubleTap2Lock (on the StatusBar)
SwipeBack
Pocket Keyguard (to avoid accidental unlocks when the phone is inside the pocket)
SIOPlus I/O Scheduler
Optimized Wheatley CPU Governor
Fast Random Generator (frandom)
LowMemoryKiller 3.4
Entropy tweaks (haveged service, binfmt_elf.c code optimization)
Dynamic Readahead, cache pressure and writeback parameters
Adaptive Overclock
Changelog:
v1.4
New Adaptive Overclock feature
Fully functional LowMemoryKiller from 3.4 kernel
LZ4 compression for ZRam, kernel and ramdisk
v1.3
Fix multitouch
Add 825MHz and 844MHz overclock frequencies
v1.2
Improve branch prediction for Tass drivers
Add Dynamic Overclock
Implement Dynamic cache pressure and writeback parameters
Global SwipeBack feature (swipe left from the right side of the action bar)
Disable kernel logs (printk)
Add modified Wheatley governor
Update Zram and ZsmAlloc drivers from androidarmv6 sources
Make most launcher unkillable
Use different minfree/adj configuration for improved multitasking
Add a NoSweep kernel version
v1.1
Add Landscape mode for DoubleTap2Lock
Update BFS to 0.416
Add AOKP build
Downloads​
What is Adaptive Overclock?
If the max frequency is higher then 600 MHz, the CPU will be allowed to use that frequency only in extreme cases, when it is actually needed. (e.g. gaming, surfing internet, heavy multitasking)
This feature works only with the Wheatley governor.
Don't use scripts/perfomance packs/Crossbreeder on this kernel. Just don't.
XDA:DevDB Information
elementary Kernel, a Kernel for the Samsung Galaxy Mini
Contributors
alin.p
Kernel Special Features: Sweep2Wake, DoubleTap2Wake/Lock, Undervolting
Version Information
Status: Stable
Current Stable Version: 1.4
Created 2014-01-12
Last Updated 2014-02-03

Badass kernel 2.1? LOL.
I know it's not, but this is how I take it.
And a question: Will you release it for all CM versions?

I honourably request for such kernels for Cyanogenmod 10.2 and 11.
Sent from my SM-N9005 using XDA Premium 4 mobile app

ast00 said:
Badass kernel 2.1? LOL.
I know it's not, but this is how I take it.
And a question: Will you release it for all CM versions?
Click to expand...
Click to collapse
It's a completely different source actually, but yeah, it contains most of the badass features in an upgraded form.
Yes I'll compile for other CM versions too in the near future.
jamesmuking5 said:
I honourably request for such kernels for Cyanogenmod 10.2 and 11.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I already have a CM10.2 and CM11 build in the works. Stay tuned

alin.p said:
It's a completely different source actually, but yeah, it contains most of the badass features in an upgraded form.
Yes I'll compile for other CM versions too in the near future.
I already have a CM10.2 and CM11 build in the works. Stay tuned
Click to expand...
Click to collapse
Log disabled or enabled?
Edit-Enabled(checked myself)
Can you explain dynamic read ahead.isnt read aheads located in sys/devices/virtual/bdi/..
Sent from my GT-S5570 using XDA Premium 4 mobile app

alin.p said:
This month I created a new kernel to compensate for the lost stability in Badass, and I thought it would be nice to share it with you.
Based on the original 2.6.35 source from Samsung OpenSource Software, this kernel is cleaner than Badass, without unnecessary hybrid updates and risky mods.
Features:
3-step Undervolted
Brain F*ck Scheduler 0.413 with O(1) complexity instead of O
UltraKSM 0.122
Sweep2Wake
DoubleTap2Wake (on the upper half of the screen)
DoubleTap2Play/Pause (on the lower half of the screen)
DoubleTap2Lock (on the StatusBar)
Pocket Keyguard (to avoid accidental unlocks when the phone is inside the pocket)
SIOPlus I/O Scheduler
Optimized OnDemand CPU Governor
Fast Random Generator (frandom)
LowMemoryKiller 3.4
Entropy tweaks (haveged service, binfmt_elf.c code optimization)
Dynamic Readahead
Downloads:
elementarycm9.zip - 4.86 MB (only CM9 based ROMs for now)
XDA:DevDB Information
elementary Kernel, a Kernel for the Samsung Galaxy Mini
Contributors
alin.p
Kernel Special Features: Sweep2Wake, DoubleTap2Wake/Lock, Undervolting
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2014-01-12
Last Updated 2014-01-12
Click to expand...
Click to collapse
you can add monitor mode to this kernel?
its a badass new feature.

arpitkh96 said:
Log disabled or enabled?
Sent from my GT-S5570 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Log enabled.
SMOKERBUNNY said:
you can add monitor mode to this kernel?
its a badass new feature.
Click to expand...
Click to collapse
Never quote whole OP. Make a mention instead if you want me to get notified of your reply.
Monitor mode is already there, you can use Shark for Root from Playstore to get this functionality.

alin.p said:
Log enabled.
Never quote whole OP. Make a mention instead if you want me to get notified of your reply.
Monitor mode is already there, you can use Shark for Root from Playstore to get this functionality.
Click to expand...
Click to collapse
I have an init.d script which set sdcard read ahead to 128kb.will this effect dynamic read ahead of your kernel
Sent from my GT-S5570 using XDA Premium 4 mobile app

arpitkh96 said:
I have an init.d script which set sdcard read ahead to 128kb.will this effect dynamic read ahead of your kernel
Sent from my GT-S5570 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Dynamic readahead works with the RAM readahead not the Sd-card values. But please don't use any scripts on this kernel if you want full stability and performance. I only recommend Greenify for improving the performance.

alin.p said:
Dynamic readahead works with the RAM readahead not the Sd-card values. But please don't use any scripts on this kernel if you want full stability and performance. I only recommend Greenify for improving the performance.
Click to expand...
Click to collapse
Ok thanks. I noticed that after installing kernel sdread ahead values are 2048.shouldn't they be lesser like 512 or 128.i experienced better performance and battery on 128.even cm11 have 128kb by default.
Sent from my GT-S5570 using XDA Premium 4 mobile app

@alin.p
glad to meet u again, keep ur hard work on new kernel
is this kernel same as u sent before or it's newer version?

Anyone else having trouble with Dev-Host today? It took me half an hour to download it without timeout.

arpitkh96 said:
Ok thanks. I noticed that after installing kernel sdread ahead values are 2048.shouldn't they be lesser like 512 or 128.i experienced better performance and battery on 128.even cm11 have 128kb by default.
Sent from my GT-S5570 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
In my R/W speed tests 2048 and 3072 got the best results. 128kb gave me very slow reading speeds, even 4 times slower than with 2048.
magmini said:
@alin.p
glad to meet u again, keep ur hard work on new kernel
is this kernel same as u sent before or it's newer version?
Click to expand...
Click to collapse
It is a much newer version.

Does it work on Miui Caspian Series?

XDRdaniel said:
Does it work on Miui Caspian Series?
Click to expand...
Click to collapse
I don't remember what that ROM is based on. If it is based on CM9 it will work. Ask @magmini

It's AOSP...

XDRdaniel said:
It's AOSP...
Click to expand...
Click to collapse
New AOSP build. Check the OP.

alin.p said:
I don't remember what that ROM is based on. If it is based on CM9 it will work. Ask @magmini
Click to expand...
Click to collapse
XDRdaniel said:
It's AOSP...
Click to expand...
Click to collapse
yes, it's AOSP but both AOSP&CM kernels working on my miui :silly:

alin.p said:
New AOSP build. Check the OP.
Click to expand...
Click to collapse
And what now? CM 10.2 or CM11? BTW I would appreciate having an app to turn off doubletap to wake/sleep. I tried typing CM11 and it made my phone go sleep. In landscape the button 1 is where the detection zone is.
Sent from my GT-S5570 using xda premium

@alin.p please dont neglect galaxy fit . We r waiting for u

[ROM][Kernel][V1.2.1]Bauner X-treme Cyanogen + AOKP android-4.4.4_r2.0.1 Linaro 4.9.2

After many month of internal testing here comes soon my new speed optimized CM and AOKP Android 4.4.4_r2.0.1 Standard + CPU and GPU OC ROM'S
Features:
All versions:
stable and fast
stock Cyanogenmod/AOKP UI
kernel fixes for linaro gcc
kernel with AIO enabled
AIO: Don't plug the I/O queue in do_io_submit()
ROW as default io scheduler
build with linaro gcc 4.9.2
build with -O3
kernel build with -Ofast
faux123`s dyn fsync
libjpeg-turbo
optimized arm rwsem algorithm
and many more...
AOKP version:
added cm apollo music player
added cm file manager
added cm torch
Changelog:
V1.2.1:
Kernel + cm11 + aokp kitkat:
fixed an bug that could make connecting to network very slow
rwsem: steal writing sem for better performance
ondemand: enabled counting iowait as busy for exynos too
cm11 + aokp kitkat rom:
updated to latest cm11 aokp kitkat changes
build with some of JustArchi's ArchiDroid Optimizations
http://forum.xda-developers.com/showthread.php?t=2754997
V1.2
kernel + cm11 +aokp kitkat:
fixed an bug that could make the oc kernel unstable
overclock version with 1600mhz max with 16 step frequency table and reduced core voltage
overclock version with 1500mhz max with 15 step frequency table and optimized core voltage
standard version with 1400mhz max with 14 step frequency table and optimized core voltage
on idle cpu can go to 100mhz instead of 200mhz for longer battery life
higher (but save) thermal throttling values
cm11 +aokp kitkat:
latest cm/aokp changes
optimized vm values
multithread dexopt enabled
added experimental call recording support (disabled as default! to enable flash the provided addon in recovery)
V1.1 CM11 + AOKP (06.09.2014):
The picture corruption in Playstore is fixed
To update flash the new version + gapps
Known issues with latest versions:
none known
Downloads:
Cyanogenmod 11 4.4.4 r 2.0.1
V1.2.1:
https://www.androidfilehost.com/?fid=95784891001608504
Addon for Cyanogenmod V1.2.1 to enable experimental call recording:
(!!Use only if allowed in your Country!!)
https://www.androidfilehost.com/?fid=95784891001608384
V1.2:
https://www.androidfilehost.com/?fid=23622183712473008
Addon for Cyanogenmod V1.2 to enable experimental call recording:
(!!Use only if allowed in your Country!!)
https://www.androidfilehost.com/?fid=23622183712473389
V1.1:
https://www.androidfilehost.com/?fid=23622183712467486
V1.0:
https://www.androidfilehost.com/?fid=23622183712466474
Cyanogenmod 11 4.4.4 r 2.0.1 Overclocked
Use only if you know what are you doing!
V1.2.1:
1500mhz:
https://www.androidfilehost.com/?fid=95784891001608511
1600mhz:
https://www.androidfilehost.com/?fid=95784891001608517
Addon for Cyanogenmod V1.2.1 to enable experimental call recording:
(!!Use only if allowed in your Country!!)
https://www.androidfilehost.com/?fid=95784891001608384
V1.2:
1500mhz:
https://www.androidfilehost.com/?fid=23622183712473009
1600mhz:
https://www.androidfilehost.com/?fid=23622183712473010
Addon for Cyanogenmod V1.2 to enable experimental call recording:
(!!Use only if allowed in your Country!!)
https://www.androidfilehost.com/?fid=23622183712473389V1.1
Use only if you know what are you doing!
Its also overvolted to get it stable on my device!
It has higher battery drain!
It can damge your device!
cpu +200mhz
cpu +0,15V @ 1600mhz
gpu +266mhz
gpu +0,05V
https://www.androidfilehost.com/?fid=23622183712467562
AOKP Kitkat 4.4.4 r 2.0.1
V1.2.1:
https://www.androidfilehost.com/?fid=95784891001608355
Addon for AOKP Kitkat V1.2.1 to enable experimental call recording:
(!!Use only if allowed in your Country!!)
https://www.androidfilehost.com/?fid=95784891001608360
V1.2:
https://www.androidfilehost.com/?fid=23622183712473386
Addon for AOKP Kitkat V1.2 to enable experimental call recording:
(!!Use only if allowed in your Country!!)
https://www.androidfilehost.com/?fid=23622183712473388
V1.1
https://www.androidfilehost.com/?fid=23622183712467487
V1.0:
https://www.androidfilehost.com/?fid=23622183712466889
AOKP Kitkat 4.4.4 r 2.0.1 Overclocked
Use only if you know what are you doing!
V1.2.1:
1500mhz:
https://www.androidfilehost.com/?fid=95784891001608358
1600mhz:
https://www.androidfilehost.com/?fid=95784891001608359
Addon for AOKP Kitkat V1.2.1 to enable experimental call recording:
(!!Use only if allowed in your Country!!)
https://www.androidfilehost.com/?fid=95784891001608360
V1.2:
1500mhz:
https://www.androidfilehost.com/?fid=23622183712473372
1600mhz:
https://www.androidfilehost.com/?fid=23622183712473365
Addon for AOKP Kitkat V1.2 to enable experimental call recording:
(!!Use only if allowed in your Country!!)
https://www.androidfilehost.com/?fid=23622183712473388
V1.1:
Use only if you know what are you doing!
Its also overvolted to get it stable on my device!
It has higher battery drain!
It can damge your device!
cpu +200mhz
cpu +0,15V @ 1600mhz
gpu +266mhz
gpu +0,05V
https://www.androidfilehost.com/?fid=23622183712467564
Kernel for CM/AOKP based Kitkat roms
V1.2.1:
https://www.androidfilehost.com/?fid=95784891001608505
V1.2:
https://www.androidfilehost.com/?fid=23622183712473030
V1.1:
https://www.androidfilehost.com/?fid=23622183712466692
OC Kernel for CM/AOKP based Kitkat roms
Use only if you know what are you doing!
V1.2.1:
1500mhz:
https://www.androidfilehost.com/?fid=95784891001608510
1600mhz:
https://www.androidfilehost.com/?fid=95784891001608518
V1.2:
1500mhz:
https://www.androidfilehost.com/?fid=23622183712473031
1600mhz:
https://www.androidfilehost.com/?fid=23622183712473034V1.1
Use only if you know what are you doing!
Its also overvolted to get it stable on my device!
It has higher battery drain!
It can damge your device!
cpu +200mhz
cpu +0,15V @ 1600mhz
gpu +266mhz
gpu +0,05V
https://www.androidfilehost.com/?fid=23622183712467567
sources:
http://github.com/bauner
Google Apps gapps-kk-20140606-signed.zip
https://www.androidfilehost.com/?fid=23501681358558856
The attached benchmark results are from the non OC Cyanogenmod 11 with standard dalvik runtime after a clean install

Hi Bauner,
Just when we thought things were starting to get a little slow around here (although thanks to JackEagle and his recent Spirit release) out comes another Rom maker.....
All roms for our Note are, as always..... TRULY WELCOMED!!!! thank you....
So will this have any bells and whistles, as found in other KK roms... such as Driving Mode and what not...??
Cheers, Lister

Many thanks for the new ROM for Our device. If you could include features list really appreciate..

So will this have any bells and whistles, as found in other KK roms... such as Driving Mode and what not...??
Click to expand...
Click to collapse
the roms are stock aokp and cm only optimized to run fast and stable.
there also comes an oc version with cpu 1600mhz and gpu 533mhz

bauner said:
the roms are stock aokp and cm only optimized to run fast and stable.
there also comes an oc version with cpu 1600mhz and gpu 533mhz
Click to expand...
Click to collapse
Thx ,wil try this in the weekend ,but how is batterylive with this rom ?:good:

smartidoos said:
Thx ,wil try this in the weekend ,but how is batterylive with this rom ?:good:
Click to expand...
Click to collapse
I cant say much about the battery life since my battery is nearly dead.
But better as original cm11

bauner said:
After 3 month of internal testing here comes soon my new speed optimized CM and AOKP Android 4.4.4_r2.0.1 Standard + CPU and GPU OC ROM'S
Features:
stable and fast
stock Cyanogenmod/AOKP UI
kernel fixes for linaro gcc
kernel timer 100hz
kernel with AIO enabled
AIO: Don't plug the I/O queue in do_io_submit()
ROW as default io scheduler
build with linaro gcc 4.9.2
build with -O3
kernel build with -Ofast
faux123`s dyn fsync
libjpeg-turbo
optimized arm rwsem algorithm
and many more...
Known issues:
Wired preview images in Playstore (this is a known problem with newer toolchains - no fix at this time https://bugs.launchpad.net/linaro/+bug/1332989)
Downloads:
Cyanogenmod 11 4.4.4 r 2.0.1
https://www.androidfilehost.com/?fid=23622183712466474
Cyanogenmod 11 4.4.4 r 2.0.1 Overclocked
soon
AOKP Kitkat 4.4.4 r 2.0.1
soon
AOKP Kitkat 4.4.4 r 2.0.1 Overclocked
soon
Kernel for CM/AOKP based Kitkat roms
tomorrow
OC Kernel for CM/AOKP based Kitkat roms
soon
sources:
http://github.com/bauner
Google Apps gapps-kk-20140606-signed.zip
https://www.androidfilehost.com/?fid=23501681358558856
The attached benchmark results are from the non OC Cyanogenmod 11 with standard dalvik runtime after a clean install
Click to expand...
Click to collapse
Looks ausum
M downloding it and also waiting for oc edition hoping it soon
M excitedd........

Wondering about such an awesome antutu score lol.. Never went above 14k anyways.. Looks awesome..
Downloading..
Thankyou @bauner
Sent from my GT-N7000 using XDA Premium 4 mobile app

Have been looking for a new ROM to flash over the weekend. Guess I'll give this ROM a shot and post a video review of it :good:

Hi bauner, congratulations for the great work. Everything works fine but I have a problem with the play store. I used pa gapps mini modular, can depend on this if you see a 16-bit type? Thanks again

panamera2011 said:
Hi bauner, congratulations for the great work. Everything works fine but I have a problem with the play store. I used pa gapps mini modular, can depend on this if you see a 16-bit type? Thanks again
Click to expand...
Click to collapse
I wrote it in first post:
Known issues:
All versions:
Wired preview images in Playstore (this is a known problem with newer toolchains - no fix at this time https://bugs.launchpad.net/linaro/+bug/1332989)

bauner said:
I wrote it in first post:
Known issues:
All versions:
Wired preview images in Playstore (this is a known problem with newer toolchains - no fix at this time https://bugs.launchpad.net/linaro/+bug/1332989)
Click to expand...
Click to collapse
Ok, I'm sorry I did not read everything. Thank for help [emoji16]

panamera2011 said:
Ok, I'm sorry I did not read everything. Thank for help [emoji16]
Click to expand...
Click to collapse
I see that about 12hours ago a fix was released.
Next days I build an update which should fix the playstore icon issue

I have instald the rom now ,until now stable en no issues, but batterylive is a little bit draining , but I have now orded a new battery.
I hope this wil be mine rom for the future.
:good::good::good:

Really good kernel [emoji1]

Hi, how did you did it, i can have only 16200 average score. Did you turn on art? Or sth else?
Sent from my GT-N7000 using XDA Free mobile app

akantoch said:
Hi, how did you did it, i can have only 16200 average score. Did you turn on art? Or sth else?
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
I used entropy, sd booster 512 KB and Tegrak to set the gpu 134 - 200 - 400MHz, no overclock cpu no art [emoji4]
Sent from my H60-L02 using Tapatalk

Version 1.1 is finish
Changelog:
V1.1 CM11 + AOKP (06.09.2014):
The picture corruption in Playstore is fixed
To update flash the new version + gapps

OC Kernel for CM/AOKP based Kitkat roms is finish
Use only if you know what are you doing!
Its also overvolted to get it stable on my device!
It has higher battery drain!
It can damge your device!
cpu +200mhz
cpu +0,15V @ 1600mhz
gpu +266mhz
gpu +0,05V

OC-V1.1-CM11/AOKP Kitkat roms are finish
Use only if you know what are you doing!
Its also overvolted to get it stable on my device!
It has higher battery drain!
It can damge your device!
cpu +200mhz
cpu +0,15V @ 1600mhz
gpu +266mhz
gpu +0,05V

[KERNEL] Aries Kernel v1.7 for Redmi Note 4G(Dior)

This is my custom kernel for Dior(Redmi note 4G single SIM).Will work on all CM/AOSP based roms
Use "Kernel Aduitor" app from Play Store to change kernel parameters
To install,Download attached file and flash using recovery.No need to wipe anything!
Features/Changelog
V1.7
Compile with UBERTC GCC 4.9
Add Alucard Hotplug as default
Remove DEBUG_KERNEL and loads of debug and HID drivers.User RAM now 1876 MB
Remove unneded panel drivers
Note: If u want to sacrifice battery for performance,disable hotplug using Kernel Aduitor app
V1.5
Fix touch edge bug for some touchscreens
Compile with GCC 4.9
Remove GPU OC for now
Faux's Sound Control
Savoca's KCAL support for post processing control [v2]
Replace Qcom's MPDecision with Faux123's IntelliPlug hotplug(default)
Add new IO Schedulers: Sio,Sio+,Tripndroid,Zen
New CPU Governors: Smartmax,Darkness,Intellimm,Yankactive,Wheatley,SmartAssH3,Nightmare,Intellidemand,Asswax,Adaptive,Abyssplug,Abyssplygv2,Alucard,Lionheart
Even more RAM unlocked
ARM_UNWIND disabled
Use Ext4 for Ext2/3
V1.0
GPU OC to 480 Mhz
CPU OC upto 1693 Mhz
Removed some debug/bloat from kernel
More RAM available to user
Sources
https://github.com/sakindia123/android_kernel_xiaomi_dior
Thanks to Faheem Kamal,Wang Hao Yang and audahadi for device bringup

is this kernel will cause heating issue:what:

Is this kernel worth it or will it make the device more oven like cause I can barely play some games.. Like FTS2015..
TheAqib
Send from my RedMi Note4G

Awesome work Sarthak! Thanks a lot for your efforts.
Sent from my HM NOTE 1LTE using Tapatalk

Will you update this kernel?
Edit: ive seen your github. I hope the hotplugs are not messed up lol. Ive seen people make kernels with 2 hotplugs active lol. Will it still support cm12.1?

OldYellowBricks said:
Will you update this kernel?
Edit: ive seen your github. I hope the hotplugs are not messed up lol. Ive seen people make kernels with 2 hotplugs active lol. Will it still support cm12.1?
Click to expand...
Click to collapse
New update today or tomorrow.
I wont mess up the hotplugs :good:

V1.5 released.Edge touch fix included.See changelog in post#1

Did anybody test this kernel with latest MIUI 7?
Sent from my HM NOTE 1LTE using Tapatalk

Hi! Great kernel, but seems to be missing the "call touches while screen off problem" which is already fixed in faheem's kernel: https://github.com/faheemkamal/android_kernel_xiaomi_dior .

v1.7 released!

Just for CM/AOSP Roms?

Will this work on mokee 6.0?

Any plan to port from the current kernel source from 3.4 to lets say 3.10.x?

Hi! I'm on cm12.1, can I install this kernel? What are the instructions to install it? Will I lose my data? I have xposed installed.

pls update the camera drivers
in blisspop rom the camera goes fully black and then comes back multiple times when coming from sunlight to my home..
also will it work in 6.0 based roms ???

network problem
network reset while cellular data on.luckly i have install kernel auditor before flash this.change misc setting westwood to highspeed.n its seem okay for now.need to investigate more.i search kernel that can boost my gaming performance,but i too scared to try kernel auditor tweek.can u suggest to me.anyway thanks for this kernel.

@sakindia123 any plans to update the kernel..?

I tried on cm 11 ..its stable(some kind of spanish development) cpu Hotplugs were disabled by default .. .. But there was same lagg as it was before this kernel... And yes wifi stopped working too ...so yeah !!

Main error i found after installing this was my screen and home+back+menu buttons didnt work at all..

I'll try to see if it solves the touchscreen error, thanks!