back to old kernel - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hey guys so I installed Speedmod and now I want my old, stock kernel.
I have no idea what should I download, and how to flash. can anyoe help?
This is my info:
GT-N7000
4.0.4
N7000JKLP2
3.0.15
[email protected] #k3-15
SMP PREEMPT Fri Oct 26 20:22:16 SGT 2012
IMM76D.JKLP8
Thanks.

The rom you are on is not safe with the stock kernel. Speedmod is safe. Why do you want to go back to stock kernel? If still you want to revert, then flash the ICS rom agian, or extract the zimage from the rom file and use the rom updater zip and replace the zimage (like speedmod zip) and flash..

Related

[Q] How to downgrade speedmod kernel from K13e to K13c

Hi All,
Reason for this question is that, first of all I wanted to root my newly bought SGS GT-I9000 (2.2 DDJP6) So, flashed speedmod kernel K13E (latest). Later, when I wanted to install MIUI rom, as per the instruction one need to flash K13C kernel.
But, whenever I try to flash SM - K13C kernel on top of K13E, I tend to soft-brick my phone (BSOD). I need to once again flash K13E to get back my SGS to work.
So, in order for me to get on to MIUI rom, I have two options...
1) Downgrade K13E to K13C kernel. And continue to flash MIUI rom.
2) Restore my kernel to stock kernel first. Then start flashing K13C and continue to flash MIUI rom.
Can somebody please suggest, which option would be best and highly feasible?
Thanks in advance for the responses
Prabhu.
i dont think it matters what version of speedmod you are on, its only so you have CWM to flash the cyanogen kernel.
but anyway if you want to downgrade just download the one you need k13c and flash it thru CWM or ODIN and it will overwrite your previous kernel
I did try to flash K13C on top of K13E. Odin just froze at <ID:0/022> zImage step.
Please find the snapshot attached.
how long has it been like that. ?? try to find a CWM version and see if that works.
or just flash miui with your current kernel
If u want to get on miui, follow the guide on theandroidsoul.com/net.....good to have a clean start with ezbase2.0
Sent from my GT-I9000 using XDA App
I tried the CMW version of speedmod k13c and was successful. But, while flashing the cm7-galaxys-initial-kernel.tar from odin again, I got stuck in the below attached odin screen.
Is there any CWM version for the cm7-galaxys-initial-kernel.tar? What is that I am doing different?

How to go from stock->MIUI

Hello everyone at XDA, I've just bought a Samsung Galaxy S GT i9000 from the store Mediamarket.
I want to have MIUI on my device, so I want to know exactly how to get it (how to root it, how to add cwm, add a custom rum, put miui in.. yeah everything I need).
Right now I got a stock rom, here is some info:
When i go to Settings-> About phone, i get this:
Code:
Model Number: GT-I9000
Firmware version: 2.3.3
Basband version: I9000XXJVO
Kernel version: 2.6.35.7-I9000XWJVH-CL184813
[email protected] #2
Build Number: GINGERBREAD.XWJVH
When I call *#1234# i get this:
Code:
PDA: I9000XWJVH
PHONE: I9000XXJVO
CSC: I9000NEEJV3
Build Info: Wed May 4 18:03:59 KST 2011
So please everyone, tell me how to put MIUI inside (so I can understand it) of this awesome phone!
At first you have to have a Gingerbread-firmware as a base - you have that.
Then you need to flash a kernel that includes CWM (just flash it with Odin, you have to put the file into the PDA-field).
Last step: copy MIUI.zip onto your internal sdcard and flash it through CWM (install zip from sdcard -> choose zip from sdcard -> MIUI.zip -> Yes).
So first step is done just by doing nothing.. awesome
Do you mean I don't need to root? Can you give me a link to the kernel i should flash?
Can i flash this http://www.darkyrom.com/community/i...tion-edition-10-1-gt-i9000-only-for-now.3237/ with Odin?
dewide said:
So first step is done just by doing nothing.. awesome
Do you mean I don't need to root? Can you give me a link to the kernel i should flash?
Can i flash this http://www.darkyrom.com/community/i...tion-edition-10-1-gt-i9000-only-for-now.3237/ with Odin?
Click to expand...
Click to collapse
Well you can but that is a whole ROM not just a kernal, You can get darkcore from that website, or look at the kernals here which also has darkcore
http://forum.xda-developers.com/showthread.php?t=1196704
This is a stock based kernal that i have used before, and from chainfire a v.reliable source, it should have what you need...
http://forum.xda-developers.com/showthread.php?t=788108
then flash the zip through recovery, but obviously follow the instructions from the thread you get the MIUI ROM from as it maybe be slightly different

[Q] Flashing dangerous kernel

Hi, i bought recently my Note and stock ICS is extremely annoying.I would like to flash new custom rom maybe JB but the problem is that my kernel is LPY and i read how lpy kernels have bug that would brick my phone bla bla..
So my question is, how safe is to flash new safe kernel and then flash custom rom? What do you suggest to do? Thx.
My kernel version:
Android: 4.0.3
Baseband version: N7000XXLPT
Kernel version: 3.0.15-N7000XXLPY-CL474507 [email protected] #3 SMP PREEMPT...2012
Build number: IML74K.XXLPY
Download this onto yor external SD card:
http://www.mediafire.com/download/a860nadrjigsl98/PhilZ-cwm6-XXLPY-XEN-3.99-signed.zip
Once you have downloaded it (don't extract it) install it through the stock recovery. After this you will have a brick free kernel.
To install a ROM then just follow the steps in the ROM thread (wipe system,cache,dalvik,preload,data etc) and install. That usually does it.
XxPixX said:
Download this onto yor external SD card:
Once you have downloaded it (don't extract it) install it through the stock recovery. After this you will have a brick free kernel.
To install a ROM then just follow the steps in the ROM thread (wipe system,cache,dalvik,preload,data etc) and install. That usually does it.
Click to expand...
Click to collapse
Thanks, I forgot to mention that I rooted my phone via odin, CWM v5. Would that affect on installing?
no, it won't.

[Q] Can I format/wipe?

Not sure if the brick bug still applies to JB.
I inherited this phone from a friend and want to format data/wipe/reset it.
I used the "got brickbug?" app to check if my eMMC chip was vulnerable and it is (Type: VYL00M).
Model Number: GT-N7000
Android Version: 4.1.2
Baseband Version: N7000XXLT3
Kernel Version: 3.0.31-1103517, [email protected] #3, SMP PEEMT Mon Apr 1 21:33:52 KST 2013
Build Number: JZO54K.N7000XXLT4
Is it safe to boot in recovery and wipe data/factory reset? If not, what is an alternative "safe" method I can use?
Help (or redirection) would be appreciated!
There have been no cases of a brick bug on JB so I would say it is safe... however if you want to be sure then flash Philz kernel (got to the original android development) and flash it through recovery. After that you will have a safe kernel and a custom recovery.
If You want to be sure flash from stock recovery a Philz Kernel. You can put the file zip into your sdcard than go into recovery and flash it.
:good:

Error in /sdcard/cm-11 Status 7

I have a rooted N7000 with 4.0.4 on it.
This are my info:
GT=N7000
4.0.4
N7000JKLP2
3.0.15-1091908
[email protected] #3
SMP PREEMPT Tue Sep 18 20:00:33 EEST 2012
IMM76D.JKLP8
Im trying to install CM 11 via PhilZ and CWM and it gives me an error while installing, something with metadata recursive, status 7...
Anyway, I figured I should install the CWM from Odin, can anyone tell me which one to download?
If you currently have Philz kernel then download for example Raw Kernel (any version) and flash it through recovery. You won't be able to boot into your old ICS after this but you can flash straight to CM 11 with Raw. Don't forget to do a full wipe though.
Bei60 said:
I have a rooted N7000 with 4.0.4 on it.
This are my info:
GT=N7000
4.0.4
N7000JKLP2
3.0.15-1091908
[email protected] #3
SMP PREEMPT Tue Sep 18 20:00:33 EEST 2012
IMM76D.JKLP8
Im trying to install CM 11 via PhilZ and CWM and it gives me an error while installing, something with metadata recursive, status 7...
Anyway, I figured I should install the CWM from Odin, can anyone tell me which one to download?
Click to expand...
Click to collapse
I believe error 7 often indicates youre using an old/incompatible recovery-version.
Try updating that first. (install a different kernel..)

Categories

Resources