I now that the timur kernel do it but this kernel don't work in the new version of android (kitkat4.4) so we need another kernel that do the same
samovalle41 said:
I now that the timur kernel do it but this kernel don't work in the new version of android (kitkat4.4) so we need another kernel that do the same
Click to expand...
Click to collapse
good luck, there isn't even one for 4.3, let alone 4.4
I need to otg charge on 4.4 ~~
Related
If anyone uses DSLR controller with CM9 on i9000, please tell which kernel.
Devil Kernel
Here is one kernel with USB host/OTG control !
saphirrot said:
Devil Kernel
Here is one kernel with USB host/OTG control !
Click to expand...
Click to collapse
Yeah, it says that USB host is supported, but do you actually use this feature? I tried many kernels but never got the feature to work.
Sorry if this is a dumb question. I'm still learning about ROMs and Kernels.
Before I installed JB Ultimate N7000 XXLS7 Jellybean 4.1.2 v4, I had the Hydracore universal kernel installed.
The JB ROM comes packaged with its own kernel. Is there any reason why I should re-install Hydracore?Is there any advantage to doing this at this stage?
The only change I can see wanting to make to my phone in the foreseeeable future is to try out the official Sangsung Jellybean ROM when it finally gets released as this may include features or apps not in the 4.1.2 v4 and I would like to compare.
Thanks and reagrds
Trevor
which version of Hydracore were you refering to ? if it is compatible with LS7 ( not too sure about that) then the OC version of it will give you the ability to overclock if you are a fan of that feature.
most continue on Phillz ls7 kernel, its the only one which allows the multi-window feature in ls7 to work
hydracore is not compatible with any leak jb based roms. install only if you want your phone not to boot
Many thanks for your reply.
The zip file I have is GL_HYDRACORE_v5-4_STD.zip.
Since, I've no interest in over clocking, it doesn't sound as if there is any reason to re-install this Kernel and nokiamodeln91 says it will cause the phone not to boot anyway.
I just thought having read the claims made by the develope about it being compatible with ANY ROM and all that, that it might offer some advantage if I want to change ROM later.
You mention Phillz Is7 kernel as the only one allowing the multi-window feature to work. Didn't know I hadn't got MW (Duhh!). So would you recommend installing that to make that feature work? I'll do some reading up about that kernel after this.
Thanks again.
Trevor
rraaka said:
which version of Hydracore were you refering to ? if it is compatible with LS7 ( not too sure about that) then the OC version of it will give you the ability to overclock if you are a fan of that feature.
most continue on Phillz ls7 kernel, its the only one which allows the multi-window feature in ls7 to work
Click to expand...
Click to collapse
sacentre said:
Many thanks for your reply.
The zip file I have is GL_HYDRACORE_v5-4_STD.zip.
Since, I've no interest in over clocking, it doesn't sound as if there is any reason to re-install this Kernel and nokiamodeln91 says it will cause the phone not to boot anyway.
I just thought having read the claims made by the develope about it being compatible with ANY ROM and all that, that it might offer some advantage if I want to change ROM later.
You mention Phillz Is7 kernel as the only one allowing the multi-window feature to work. Didn't know I hadn't got MW (Duhh!). So would you recommend installing that to make that feature work? I'll do some reading up about that kernel after this.
Thanks again.
Trevor
Click to expand...
Click to collapse
Which kernel you are currently on? If you haven't installed any kernel manually, that means you already have Philz kernel, which comes by default with Ultimate JB v4..
Yes, of course, you're right. I just didn't recognise the name of the Kernel. Sorry.
Shyam said:
Which kernel you are currently on? If you haven't installed any kernel manually, that means you already have Philz kernel, which comes by default with Ultimate JB v4..
Click to expand...
Click to collapse
check out the multi-window feature which is the hallmark of ls7 , some ls7 rom OPs have videos on it , learn how to enable it. its KEWL
Thanks. All working fine.
Hello guys, I have forgot my old username here, I don't even come on xda since a long time, I used to have the cyanogenmod 10.1.3 version of cyanogenmod since months (4.2.2)
because of it's highly customization
Click to expand...
Click to collapse
and easy to find an overclockable kernel (NX Kernel) a pure happyness.
But... I'm updating my stuff to a newer nightly because I want new stuff.
I also want to overclock it, but I can't find the right thread for a list of overclockable kernel for cyanogenmod 11 at 4.4.2
Could someone help me ? ( I know that I have to search, but I can't found it, that's unbelivable )
We haven't got any 4.4.2 compatible overclockable kernels. You might want to give tegrak overclock a try though, that might do it (on the stock kernel).
Hello people. I have a I9305XXUEMK1 and i had a problem trying to flash
Yank555.lu-SGS3-JB-kernel-v3.3-aroma-I9305_by_ausdim.zip
I did a backup using twrp recovery,wiped cache etc, and flashed the kernel,it said ok,and when i rebooted all o got was a black screen.Any suggestions?The reason i wanted to flash a custom kernel was to overclock CPU
Send telepathically
Tont GS3 said:
Hello people. I have a I9305XXUEMK1 and i had a problem trying to flash
Yank555.lu-SGS3-JB-kernel-v3.3-aroma-I9305_by_ausdim.zip
I did a backup using twrp recovery,wiped cache etc, and flashed the kernel,it said ok,and when i rebooted all o got was a black screen.Any suggestions?The reason i wanted to flash a custom kernel was to overclock CPU
Send telepathically
Click to expand...
Click to collapse
I had that problem too, the only way i could get out was to reflash my ROM and directly after that the custom kernel (and the G-apps)
Tont GS3 said:
Hello people. I have a I9305XXUEMK1 and i had a problem trying to flash
Yank555.lu-SGS3-JB-kernel-v3.3-aroma-I9305_by_ausdim.zip
I did a backup using twrp recovery,wiped cache etc, and flashed the kernel,it said ok,and when i rebooted all o got was a black screen.Any suggestions?The reason i wanted to flash a custom kernel was to overclock CPU
Send telepathically
Click to expand...
Click to collapse
this kernel is not updated for a while now and may have been incompatible with latest firmwares. you might want to check another kernel like this one here JB boeffla kernel 5.3 beta7, fresh and recently updated if you gonna use this, you will need to download boeffla config v2 app also for overclocking or undervolting options
of course you could also try another custom rom/custom stock rom who has a kernel that supports OC and UV by default (kerneltweaker)
just look in the development thread for those kind of roms
MaHo_66 said:
this kernel is not updated for a while now and may have been incompatible with latest firmwares. you might want to check another kernel like this one here JB boeffla kernel 5.3 beta7, fresh and recently updated if you gonna use this, you will need to download boeffla config v2 app also for overclocking or undervolting options
of course you could also try another custom rom/custom stock rom who has a kernel that supports OC and UV by default (kerneltweaker)
just look in the development thread for those kind of roms
Click to expand...
Click to collapse
boeffla config v2 app can be purchased only by donating?!
Tont GS3 said:
boeffla config v2 app can be purchased only by donating?!
Click to expand...
Click to collapse
No not necessarily, but if you want to donate you are free to do so. Here you can download the latest B.config v2 app.
Note: be careful, dont flash Samsung stock based kernel on AOSP based roms, and dont flash AOSP based kernels on Samsung stock based roms
Can you guide me through the installation? Cause i do the wipe and i install the kernel and the boeffla app..
Send telepathically
Hi, so unfortunately I'd flash the new samsung bootloader (the 4.4 one) and now I can't flash a custom kernel (e.g. : pureCM), it just boot into a black screen
I can just boot on latest Samsung roms with official kernel ans CM/CM derivatives with the stock kernel that comes with
So do someone knows what to do? Is there a way to go back to the old bootloader or to flash these kernels?
Thanks in advance and sorry if I mispelled some words !
both boeffla and agni don't work? Maybe this should be directed to @Hbohd since @psndna88 has no phone atm
kouss77550 said:
Hi, so unfortunately I'd flash the new samsung bootloader (the 4.4 one) and now I can't flash a custom kernel (e.g. : pureCM), it just boot into a black screen
I can just boot on latest Samsung roms with official kernel ans CM/CM derivatives with the stock kernel that comes with
So do someone knows what to do? Is there a way to go back to the old bootloader or to flash these kernels?
Thanks in advance and sorry if I mispelled some words !
Click to expand...
Click to collapse
Do you know which bootloader it is - XXUFNI3 or XXUFNJ1? (It should be the same as your baseband unless you flashed a new modem).
ArkThompson said:
Do you know which bootloader it is - XXUFNI3 or XXUFNJ1? (It should be the same as your baseband unless you flashed a new modem).
Click to expand...
Click to collapse
My baseband is XXUFNI3 and I haven't flashed another modem so my bootloader should be the same I guess
chongc1996 said:
both boeffla and agni don't work? Maybe this should be directed to @Hbohd since @psndna88 has no phone atm
Click to expand...
Click to collapse
So I just flashed everything from zero. I reflash samsung official rom through Odin, reflashed crDroid and finally flashed Boeffla kernel, and it worked great ! Guess maybe the boeffla kernel I first downloaded was corrupted or maybe something else. Anyway, thanks a lot!