Database Develop

[PRO][KERNEL] Riyal-based kernel with better touchscreen precision & SE logo

Hi, this is my first kernel, this based on the latest Ultima ICS kernel from riyal, with two minor tweaks
-now touchscreen reponse while swiping is 4px instead of 9px, so no more bumpy movements while draging items
-official "Sony Ericsson" boot logo
Information about the touchscreen problem (if you have not noticed it):
http://talk.sonymobile.com/thread/40474
the problem is present in latest FXP (but probably not in next's) and also in stock kernel ICS
The solutions was 99% done by nicklas lof, here:
http://review.cyanogenmod.com/#/c/22164/
Works in Stock ICS, 431 and 587, it should work with FXP releases too
Installation:
Flash kernel using fastboot
Flash original Riyal wifi Modules using CWM
Riyals kernel thread is here
I do not deserve any credits on this, I just moved a line in code to compile and changed logo. :good:

What is Stock ICS 538? or you mean 587

the recovery are same or did u update it too ?

I have to install the img with fastboot ... And I have everything right???

Thanks for this kernel. will give it try one of these days

New Kernel for PRO [MK16a/i]
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77

[email protected] said:
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77
Click to expand...
Click to collapse
You are right, this is based in Ultima ICS v1.4, in fact Riyal already has this in his sourcecode, so next's versión should already have this fix, you have to use v1.4 modules

lawong said:
the recovery are same or did u update it too ?
Click to expand...
Click to collapse
Recovery is the same

josejuangr said:
I have to install the img with fastboot ... And I have everything right???
Click to expand...
Click to collapse
After you flash the kernel you have to flash latest wifi modules from riyal, using CWM

Why now 4px? Was Gingerbread not 2px?

paul5425 said:
Why now 4px? Was Gingerbread not 2px?
Click to expand...
Click to collapse
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try

I use this kernel with stock ICS 587 and my phone gets freeze every time I unplug from charger and PC.
Anyone has the same problem?

Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh

rajeshjamnadas said:
Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh
Click to expand...
Click to collapse
This is based on latest riyal changes, I think it has voltages messed up, so I will have to build it from stock kernel someday. I dont know how to add recovery to it.

I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.

dafsoftware said:
I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.
Click to expand...
Click to collapse
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:

xperiap said:
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:
Click to expand...
Click to collapse
+1
great kernel, thanks for your work.
also flashed it with MIUI ICS, feels smoother and fast.
thanks again.

dafsoftware said:
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try
Click to expand...
Click to collapse
OK - after reading more it sounds like there has been some structural change to the driver model (something that needs fixed at a deeper level). Anyway, it would be great if you could additionally provide us with a ROM set at 2px just so we can see for ourselves.

Ext4
Does this kernel support the Ext4 partition? Great kernel by the way...
Edit : and.... Swap partition?

Even better than that, I notice that the Touch Move app has a "tune" mode which allows the user to tune the sensitivity themself. It's currently only compatible with a couple of GSII custom kernels:
http://tegrak2x.blogspot.co.uk/2011/10/touch-move-tune-compatible-kernels.html?m=1
It would be interesting to see if we could get Touch Move Tune working on Xperia devices too.
Sent from my MK16i using xda app-developers app

problem on bootscreen after kernel and rom flash

Hi there!
Recently i've tries to flash yank kernel passed the setup my phone wont pass the boot screen ( i9305 4g screen)... this with galaxt project rom. A kernel conflit screen appear when booting in stock so i've flashed one stock...
On stock rom works nice but when I try to go to any room, paranoid, TGP, stucks in every single boot screen...
I was using TRW RECOVERY (THE simple one)...
I'm a litttle concerned about this, can anyone help me??
I was wondering if i flash stock rom, stock kernel, stock modem, on odin it will solve this... but i cant find all the files seperatly.
Now I'm on:
Base band i9305xxbll5
Kernel 3.0.31- 746327
[email protected]#1
SMP PREEMT mon jan 7 18:50:33 KST 2013
Compilation
JZO54.I9305XXBMA3
Thanks

I was wondering if i flash stock rom, stock kernel, stock modem, on odin it will solve this... but i cant find all the files seperatly.
Why would you they are not a separate flash .
Try reading the basic faqs and guides first

JJEgan said:
I was wondering if i flash stock rom, stock kernel, stock modem, on odin it will solve this... but i cant find all the files seperatly.
Why would you they are not a separate flash .
Try reading the basic faqs and guides first
Click to expand...
Click to collapse
I know the basic faqs and guides....The problem that i'm dealing with it , is the fact that my phone isnt capable of runing TGP rom, paranoid rom to...
Any toughts about that

esdrimacoy said:
I know the basic faqs and guides....The problem that i'm dealing with it , is the fact that my phone isnt capable of runing TGP rom, paranoid rom to...
Any toughts about that
Click to expand...
Click to collapse
Anyone??

esdrimacoy said:
Anyone??
Click to expand...
Click to collapse
Problem solved.... guess it was the recovery or a bad download...

[Q] Camera don't work after UB

Hi everyone. I'm having problem with my X8. i had previously unlocked bootloader. Currently using iXperia 8 iOS 7 Diamond Build 1.2.6 with nAa-14. the problem is, i can't use the camera. every time i opened the camera it will force closed. i had changed rom countlessly but still not working. i also has changed the kernel to nAa-jb-06 and use JB rom but still the same result. i really need the camera. help me.

HyperAct said:
Hi everyone. I'm having problem with my X8. i had previously unlocked bootloader. Currently using iXperia 8 iOS 7 Diamond Build 1.2.6 with nAa-14. the problem is, i can't use the camera. every time i opened the camera it will force closed. i had changed rom countlessly but still not working. i also has changed the kernel to nAa-jb-06 and use JB rom but still the same result. i really need the camera. help me.
Click to expand...
Click to collapse
Repair with official firmware and check the camera there or flash latest gdx top on nAa kernel
The official firmware it will flash stock Rom and kernel to
Info:
Also if you have plans to relock the bootloader must do it only in stock kernel..NEVER RELOCK BOOTLOADER ON CUSTOM KERNEL

Superuser_ said:
Repair with official firmware and check the camera there or flash latest gdx top on nAa kernel
The official firmware it will flash stock Rom and kernel to
Info:
Also if you have plans to relock the bootloader must do it only in stock kernel..NEVER RELOCK BOOTLOADER ON CUSTOM KERNEL
Click to expand...
Click to collapse
I'm sorry for late reply. having internet issues. what did you mean by flashing latest gdx top?

HyperAct said:
I'm sorry for late reply. having internet issues. what did you mean by flashing latest gdx top?
Click to expand...
Click to collapse
The latest GingerDX (cm7) Rom with nAa 14 kernel because is for sure the most free of bugs rom..to see if is software problem

Superuser_ said:
The latest GingerDX (cm7) Rom with nAa 14 kernel because is for sure the most free of bugs rom..to see if is software problem
Click to expand...
Click to collapse
Try to flash with eclair 2.1.1 :good:

Trying to flash Lean Kernel w/o success

Hello people. I have a I9305XXUEMK1 and i had a problem trying to flash
Yank555.lu-SGS3-JB-kernel-v3.3-aroma-I9305_by_ausdim.zip
I did a backup using twrp recovery,wiped cache etc, and flashed the kernel,it said ok,and when i rebooted all o got was a black screen.Any suggestions?The reason i wanted to flash a custom kernel was to overclock CPU
Send telepathically

Tont GS3 said:
Hello people. I have a I9305XXUEMK1 and i had a problem trying to flash
Yank555.lu-SGS3-JB-kernel-v3.3-aroma-I9305_by_ausdim.zip
I did a backup using twrp recovery,wiped cache etc, and flashed the kernel,it said ok,and when i rebooted all o got was a black screen.Any suggestions?The reason i wanted to flash a custom kernel was to overclock CPU
Send telepathically
Click to expand...
Click to collapse
I had that problem too, the only way i could get out was to reflash my ROM and directly after that the custom kernel (and the G-apps)

Tont GS3 said:
Hello people. I have a I9305XXUEMK1 and i had a problem trying to flash
Yank555.lu-SGS3-JB-kernel-v3.3-aroma-I9305_by_ausdim.zip
I did a backup using twrp recovery,wiped cache etc, and flashed the kernel,it said ok,and when i rebooted all o got was a black screen.Any suggestions?The reason i wanted to flash a custom kernel was to overclock CPU
Send telepathically
Click to expand...
Click to collapse
this kernel is not updated for a while now and may have been incompatible with latest firmwares. you might want to check another kernel like this one here JB boeffla kernel 5.3 beta7, fresh and recently updated if you gonna use this, you will need to download boeffla config v2 app also for overclocking or undervolting options
of course you could also try another custom rom/custom stock rom who has a kernel that supports OC and UV by default (kerneltweaker)
just look in the development thread for those kind of roms

MaHo_66 said:
this kernel is not updated for a while now and may have been incompatible with latest firmwares. you might want to check another kernel like this one here JB boeffla kernel 5.3 beta7, fresh and recently updated if you gonna use this, you will need to download boeffla config v2 app also for overclocking or undervolting options
of course you could also try another custom rom/custom stock rom who has a kernel that supports OC and UV by default (kerneltweaker)
just look in the development thread for those kind of roms
Click to expand...
Click to collapse
boeffla config v2 app can be purchased only by donating?!

Tont GS3 said:
boeffla config v2 app can be purchased only by donating?!
Click to expand...
Click to collapse
No not necessarily, but if you want to donate you are free to do so. Here you can download the latest B.config v2 app.
Note: be careful, dont flash Samsung stock based kernel on AOSP based roms, and dont flash AOSP based kernels on Samsung stock based roms

Can you guide me through the installation? Cause i do the wipe and i install the kernel and the boeffla app..
Send telepathically

Xperia SP flickering screen when flashing new kernels / ROMs.

Hey,
Whenever I try to flash another kernel which is required to flash a new rom to my SP, everything works just fine. Except that when I finish the flashing and boot up to the ROM, the screen seems to flicker a lot...
I tried turning auto brightness off, flashing another compatible kernel, and flashing a couple of scripts that claimed to fix the issue...
I am currently at the stock firmware, rooted and with unlocked bootloader.
What is weird is, when I flash the stock 12.1.A.1.205 firmware back...the screen stops flickering.
Any ideas?
Thanks in advance

LoizosAristides said:
Hey,
Whenever I try to flash another kernel which is required to flash a new rom to my SP, everything works just fine. Except that when I finish the flashing and boot up to the ROM, the screen seems to flicker a lot...
I tried turning auto brightness off, flashing another compatible kernel, and flashing a couple of scripts that claimed to fix the issue...
I am currently at the stock firmware, rooted and with unlocked bootloader.
What is weird is, when I flash the stock 12.1.A.1.205 firmware back...the screen stops flickering.
Any ideas?
Thanks in advance
Click to expand...
Click to collapse
it is bug cm11 kernel. (cm kernel based 12.1.A.0.266 kernel …=> flickeris bug

win32r said:
it is bug cm11 kernel. (cm kernel based 12.1.A.0.266 kernel …=> flickeris bug
Click to expand...
Click to collapse
It's not only the cm11 kernel, other kernels like DooMLoRD kernel, which is based on the stock fw also has this problem..
Are you saying that I use a lower firmware kernel on a newer firmware?

LoizosAristides said:
It's not only the cm11 kernel, other kernels like DooMLoRD kernel, which is based on the stock fw also has this problem..
Are you saying that I use a lower firmware kernel on a newer firmware?
Click to expand...
Click to collapse
DooMLoRD kernel based 12.1.A.0.266.
I advise you use cm11 for LBL + wiliams kernel v7.. => no flickeris bug

win32r said:
DooMLoRD kernel based 12.1.A.0.266.
I advise you use cm11 for LBL + wiliams kernel v7.. => no flickeris bug
Click to expand...
Click to collapse
Oh I didn't know that it's based on the .266
Thanks man, I hope Williams kernel works

win32r said:
DooMLoRD kernel based 12.1.A.0.266.
I advise you use cm11 for LBL + wiliams kernel v7.. => no flickeris bug
Click to expand...
Click to collapse
Ok so I should've mentioned that my bl is unlocked...
Also, williams kernel v7 is for 4.3...
I'm trying to flash cm11, for cm11 there's williams kernel v4...
I tried both the stock cm11 kernel and williams one and they both gave me flickering screen...
Any other ideas?

LoizosAristides said:
Any other ideas?
Click to expand...
Click to collapse
add to build.prop this lines:
Code:
# System property for cabl
ro.qualcomm.cabl=0

win32r said:
add to build.prop this lines:
Code:
# System property for cabl
ro.qualcomm.cabl=0
Click to expand...
Click to collapse
Can you tell me what does it do?

LoizosAristides said:
Can you tell me what does it do?
Click to expand...
Click to collapse
It is fix flikers bug! :laugh:

win32r said:
It is fix flikers bug! :laugh:
Click to expand...
Click to collapse
Hmm I'll try it tomorrow
Thanks for helping me dude...

Forget it)

win32r said:
Forget it)
Click to expand...
Click to collapse
Ok so I tested it out today...and it doesn't work
I am now convinced that it's a kernel problem, since I tried a lot of different versions of cm11, but I also used 4 different kernels, each one at the latest version, NOTHING!
Any other ideas?

LoizosAristides said:
Any other ideas?
Click to expand...
Click to collapse
Hm... I don't know..=( sorry
I tried to write in support of the CM. But the answer is no.

win32r said:
Hm... I don't know..=( sorry
I tried to write in support of the CM. But the answer is no.
Click to expand...
Click to collapse
That's ok...
Thanks for your time anyway

As win32r said, you should try a cm11 based ROM but for locked bootloader (they work for ubl too). With these roms you can use a kernel based on stock ( for example stock kernel or Williams kernel Sony version) which should fix your issue.
All roms that are for LBL will work with the stock kernel or Williams kernel v7. I wrote something about this in the Williams kernel website : http://williams-kernel.tk/help.php and I'll probably write this info on xda too if I have some time.

Wow. Apparently, your kernel is the only one that that doesn't give me a flickering screen
I tried an unofficial cm11 build along with it and it worked like a charm!
I just can't thank you both enough...
Finally I got a fully working cm11 on my SP