Related
Dear Mods/devs any body who can help me!
I am stuck in a unique situation and no matter what i cant figure out a way out of this!
Before posting this have been through Abhisahara's thread on rooting and kernels, Dr Ketan's thread and many more but all confused!!
My problem is i am on the Superbrickable ZCLP5 kernel with ICS Stunner 1.4.19 which i have been using since it first launched without any problems.
As per gotbrickbug App, i have the problem of potential superbrick.
I need to go to another ROM but just cant figure a way out as now am more confused as to what really to do!!
I already have the hydracore kernel downloaded and the stock GB Rom(unrooted - V KL1) with me sitting on my PC alongwith PC ODIN.
Can anybody help me with installing the Paranoidandroid rom and which is the best way to avoid the emmc_CAP_ERASE problem!!
Many thanks!!
cyberdeception said:
Dear Mods/devs any body who can help me!
I am stuck in a unique situation and no matter what i cant figure out a way out of this!
Before posting this have been through Abhisahara's thread on rooting and kernels, Dr Ketan's thread and many more but all confused!!
My problem is i am on the Superbrickable ZCLP5 kernel with ICS Stunner 1.4.19 which i have been using since it first launched without any problems.
As per gotbrickbug App, i have the problem of potential superbrick.
I need to go to another ROM but just cant figure a way out as now am more confused as to what really to do!!
I already have the hydracore kernel downloaded and the stock GB Rom(unrooted - V KL1) with me sitting on my PC alongwith PC ODIN.
Can anybody help me with installing the Paranoidandroid rom and which is the best way to avoid the emmc_CAP_ERASE problem!!
Many thanks!!
Click to expand...
Click to collapse
Just flash Hydracore kernel and you will be good to go for flashing any custom rom.
cyberdeception said:
Dear Mods/devs any body who can help me!
I am stuck in a unique situation and no matter what i cant figure out a way out of this!
Before posting this have been through Abhisahara's thread on rooting and kernels, Dr Ketan's thread and many more but all confused!!
My problem is i am on the Superbrickable ZCLP5 kernel with ICS Stunner 1.4.19 which i have been using since it first launched without any problems.
As per gotbrickbug App, i have the problem of potential superbrick.
I need to go to another ROM but just cant figure a way out as now am more confused as to what really to do!!
I already have the hydracore kernel downloaded and the stock GB Rom(unrooted - V KL1) with me sitting on my PC alongwith PC ODIN.
Can anybody help me with installing the Paranoidandroid rom and which is the best way to avoid the emmc_CAP_ERASE problem!!
Many thanks!!
Click to expand...
Click to collapse
Take it easy, you're fine. If you've installed HydraCore it means you're on a safe kernel. Just download pc Odin if you haven't already.
What rom do you want to go to? I'd recommend for safest operation, install gb stock, then look at upgrade but it depends on which rom you want to flash.
Emmc bug is only triggered on stock kernels or under some cwm flashes which most people don't do, so take it easy, you're ok.
Sent from my GT-N7000 using xda app-developers app
cyberdeception said:
Dear Mods/devs any body who can help me!
I am stuck in a unique situation and no matter what i cant figure out a way out of this!
Before posting this have been through Abhisahara's thread on rooting and kernels, Dr Ketan's thread and many more but all confused!!
My problem is i am on the Superbrickable ZCLP5 kernel with ICS Stunner 1.4.19 which i have been using since it first launched without any problems.
As per gotbrickbug App, i have the problem of potential superbrick.
I need to go to another ROM but just cant figure a way out as now am more confused as to what really to do!!
I already have the hydracore kernel downloaded and the stock GB Rom(unrooted - V KL1) with me sitting on my PC alongwith PC ODIN.
Can anybody help me with installing the Paranoidandroid rom and which is the best way to avoid the emmc_CAP_ERASE problem!!
Many thanks!!
Click to expand...
Click to collapse
1. Flash hydracore kernel.
2. Reboot recovery.
3. Make sure you are on hydracore kernel.
4. Do what ever you want.
If you still being scare of doing this. Just follow jeetu suggestion. Go back to gb pre rooted rom by using pc odin. Then use mobile odin to flash rooted kernel. After get full root, go recovery and flash cm9. Done.
Sent from my GT-N7000 using xda premium
Re
Thanks for the clarity...
one more thing..
I am now flashing the kernel as we speak to hydracore..
Will i lose root if i need to install the ParanoidAndroid rom..
If not..do i need to go the whole way of installing stock GB and then rooting it and then installing the paranoid rom!..
really appreciate the help friends!..
cyberdeception said:
Thanks for the clarity...
one more thing..
I am now flashing the kernel as we speak to hydracore..
Will i lose root if i need to install the ParanoidAndroid rom..
If not..do i need to go the whole way of installing stock GB and then rooting it and then installing the paranoid rom!..
really appreciate the help friends!..
Click to expand...
Click to collapse
Flashing Hydracore doesn't affect root, you will be rooted and can flash PA directly using cwmr after flashing hydracore.
cyberdeception said:
Thanks for the clarity...
one more thing..
I am now flashing the kernel as we speak to hydracore..
Will i lose root if i need to install the ParanoidAndroid rom..
If not..do i need to go the whole way of installing stock GB and then rooting it and then installing the paranoid rom!..
really appreciate the help friends!..
Click to expand...
Click to collapse
I would recommend you go with the long route of installing stock GB first. I saw the installation instructions of PA (i'm not sure though if that's an outdated tutorial or if it's still the current one to date), but it explicitly tells you that you need to be on stock GB before installing PA. I'm open to corrections though from those who have PA already installed but personally,it would be good if you start from scratch and work your way up to eventually install PA.
That's just my advice to you.
Hi,
I got a question, I have flashed the kernel to the hydracore one, have root and CWM but I am still on the ICS stock ROM. Is it possible to go directly to paranoid one without the need to downgrade to GB ?
By the way, can you provide a link to dl paranoid ?
Thank you in advance for your answer.
zone.art said:
Hi,
I got a question, I have flashed the kernel to the hydracore one, have root and CWM but I am still on the ICS stock ROM. Is it possible to go directly to paranoid one without the need to downgrade to GB ?
By the way, can you provide a link to dl paranoid ?
Thank you in advance for your answer.
Click to expand...
Click to collapse
Yeah you can flash paranoid straight... Download GApps and the rom from original development section.. Remember perform all the wipes before flashing
Enviado desde mi GT-N7000 usando Tapatalk 2
Deleted
msedek said:
Yeah you can flash paranoid straight... Download GApps and the rom from original development section.. Remember perform all the wipes before flashing
Enviado desde mi GT-N7000 usando Tapatalk 2
Click to expand...
Click to collapse
Ok but as I can see the ROM is only 160 MB as other ROM (stock for example are almost 700MB), I don't want to lose some essential functionalities by flashing to an incomplete ROM. How to know which file to dl from the Gapps is there on this one that you have the 500 MB missing ?
Thanks again and sorry for my poor knowledge
All aosp roms are that size.. It's a completely different experience as aosp roms are pure Google experience with no Samsung or any other retailers custom launcher and bloat..
It depends on Wich functionalities do you have in mind?
Enviado desde mi GT-N7000 usando Tapatalk 2
Ok thanks so they put a lot of useless heavy crap inside I guess
I am still struggling to have a download link for a stable zip file to flash, is it possible to have a link ?
Thank you
I've downloaded the rom in the past no issues.. Don't know about mirrors.. Maybe ask there in the ParanoidAndroid threat
Enviado desde mi GT-N7000 usando Tapatalk 2
Hello,
I am new to the XDAdevelopers forum and don't have much knowledge of rooting or installing customs roms to Android phones.
I currently own the Galaxy Note GT-N7000 and just looking around some videos I would love to have some customs rom installed on my phone, such as the new Jelly Bean roms that are out now.
I would love to know on how to root my Galaxy Note if there is a Noob Tutorial for rooting the galaxy note and maybe a Noob Tutorial on how to install Jelly Bean rom that is currently out (any suggestion on which rom would be great)
As I said I am a noob and don't have much knowledge on how to mod your android phones and any help would be greatly appreciated
FYI: Looked around the forums for the while, I couldn't find anything simple enough, I bet there is somewhere in the forum, not sure if I was looking correctly >.<
Here is a guide to root your phone
http://forum.xda-developers.com/showthread.php?t=1329360
After you root your phone,flash a safe kernel like hydracore or speedmod kernel and then flash any jb rom
Jellycore and paranoid android are two jb roms that i feel the best
rajsekhar.300 said:
Here is a guide to root your phone
http://forum.xda-developers.com/showthread.php?t=1329360
After you root your phone,flash a safe kernel like hydracore or speedmod kernel and then flash any jb rom
Jellycore and paranoid android are two jb roms that i feel the best
Click to expand...
Click to collapse
Thanks for replying do you have any links to the Kernals and JB roms ? and if there is any tutorial for them too
Thanks again for your time.
Hydracore
forum.xda-developers.com/showthread.php?t=1749863
Jellycore rom
forum.xda-developers.com/showthread.php?t=1872921
rajsekhar.300 said:
Hydracore
forum.xda-developers.com/showthread.php?t=1749863
Jellycore rom
forum.xda-developers.com/showthread.php?t=1872921
Click to expand...
Click to collapse
Does my version of Android Matter for these upgrades ?
I have
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Georific said:
Does my version of Android Matter for these upgrades ?
I have
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Click to expand...
Click to collapse
No problem with your version, they works for all 4.0.X roms. here is complete guide for flashing.
jeetu1981 said:
No problem with your version, they works for all 4.0.X roms. here is complete guide for flashing.
Click to expand...
Click to collapse
Thank you so god damn much for the HELP! this is exactly what I needed one problem though it says I need MobileOdenPro :/ I really can't purchase apps of the market is that a problem ? for the Kernel
No.After you flash the kernel,you can install jb rom through cwm
Georific said:
Thank you so god damn much for the HELP! this is exactly what I needed one problem though it says I need MobileOdenPro :/ I really can't purchase apps of the market is that a problem ? for the Kernel
Click to expand...
Click to collapse
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
jeetu1981 said:
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
Click to expand...
Click to collapse
Do I need any add any other roms to my phone before I put a Jelly Bean rom onto my phone ?
Georific said:
Do I need any add any other roms to my phone before I put a Jelly Bean rom onto my phone ?
Click to expand...
Click to collapse
As long as you are on any safe kernel you can flash any JB rom, no matter if you are on any TW ICS, GB or CM9/10 roms. I am on CM10 right now and flashed it directly on stock LRQ ICS with Speedmod kernel.
jeetu1981 said:
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
Click to expand...
Click to collapse
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Georific said:
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Click to expand...
Click to collapse
yes, it needs some files to be downloaded manually, mobile odin pro downloads them automatically. Why don't you use K-tools, its free and very easy to use. i flashed Speedmod last time using k-tools only.
Georific said:
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Click to expand...
Click to collapse
You can find those additional files in the same link
Scroll down few posts and you can find it
jeetu1981 said:
yes, it needs some files to be downloaded manually, mobile odin pro downloads them automatically. Why don't you use K-tools, its free and very easy to use. i flashed Speedmod last time using k-tools only.
Click to expand...
Click to collapse
I got it to work for Odin I added the Kernal Hydra do I just press Flash Firmware ? Please REply ASAP
rajsekhar.300 said:
You can find those additional files in the same link
Scroll down few posts and you can find it
Click to expand...
Click to collapse
I managed to get Odin working I added the kernel Hydra do i just go to the bottom and click Flash Firmware ?
Georific said:
I managed to get Odin working I added the kernel Hydra do i just go to the bottom and click Flash Firmware ?
Click to expand...
Click to collapse
Yes, select kernel (.tar or zimage format) in kernel field and then hit flash firmware. make sure to check if the kernel is flashed after restart before doing any wipes and all
bad or good...
jeetu1981 said:
Yes, select kernel (.tar or zimage format) in kernel field and then hit flash firmware. make sure to check if the kernel is flashed after restart before doing any wipes and all
Click to expand...
Click to collapse
I followed every step on the link you gave me on how to get jellybeanitwas sucessful when installed it bootup but its been in the boot upscreen for a while it just says cyanogen mod. Like 20 min boot up or more is this bad.... help!!!!
Georific said:
I followed every step on the link you gave me on how to get jellybeanitwas sucessful when installed it bootup but its been in the boot upscreen for a while it just says cyanogen mod. Like 20 min boot up or more is this bad.... help!!!!
Click to expand...
Click to collapse
boot in cwm recovery and do a full wipe, this should solve the problem or else reflash the JB rom.
its works
jeetu1981 said:
boot in cwm recovery and do a full wipe, this should solve the problem or else reflash the JB rom.
Click to expand...
Click to collapse
The full wipe worked thanks so much man appreciate it for everything
Hi
Just got my N7000 back from service; With just about all the hardware except the screen were replaced, it also returned running the stock ROM (Android 4.1.2, kernel version 3.0.31-1103517, build JZ054K.N7000XXLT5). While the stock Jelly Bean is miles ahead of both the original Gingerbread ROM and the stock ICS ROM, I'd rather root and go back to the CyanogenMod nightlies...
Thing is, between all the "Super Brick" and "eMMC" bugs - I'm a bit scared and terribly confused with witch technique I should use to root and ROM my phone. It sure would be nice if someone could point me to a tried and tested method (preferably a step by step guide) to root and ROM my N7000XXLT5...
Root using Philz kernel. Then you can flash the rom of you choice. For instructions, head over to his thread in the original android development section.
Sent from my GT-I9500 using xda premium
Thanks nokiamodeln91!
I assume you're referring to [PhilZ-cwm6][n7000]. I've looked at this earlier. I've settled on and are comfortable flashing it using the stock recovery method, and the step by step guide (in post #3 of the PhilZ-cwm6 thread) should make this manageable enough...
The problem however is that I'm unsure as to which package/version to download. I've looked at the "What kernel to choose section" in post #2 of the PhilZ-cwm6 thread, but from that information I cannot figure out which kernel matches/is suitable for my device...
As I said, I'm terribly confused by all this...
You need to choose Philz kernel XXLT5
Sent from my GT-I9500 using xda premium
nokiamodeln91 said:
You need to choose Philz kernel XXLT5
Click to expand...
Click to collapse
Thanks again! I've downloaded "PhilZ-cwm6-XXLT5-OXX-5.03.0-signed.zip" and are ready to root/rom my phone!
I guess it freaks me out not knowing/understanding everything. Especially about something as fundamental as the bootloader/OS of my phone. It's a weird feeling reading info like "DDLSC - DXLSE - JPLSB - XXLT5 - ZSLO2" without understanding most it. Also kind of freaks me out that I'm not supposed to use the latest version of a piece of software....
Though, I've had it with the stock rom again and are ready to take my chances! So again; Thank you!
@nokiamodeln91; Just wanted to say thank you!
Rooting with "Philz kernel" is quite possibly the easiest root I've performed. Once I were sure which version/variant to download is nothing to worry about.
So now I'm back to being a happy N7000 user running CyanogenMOD! Only difference being that I'm back to nightlies...
Again; Thanks!
vidvandre said:
It's a weird feeling reading info like "DDLSC - DXLSE - JPLSB - XXLT5 - ZSLO2" without understanding most it.
Click to expand...
Click to collapse
Those are world regions and release dates
Same problem
nokiamodeln91 said:
You need to choose Philz kernel XXLT5
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Hi Guys, I have the same problem. I dont know which version to download. My droid is runing:
Kernel
3.0.31-1103517
But te Build Number is JZ054K.N7000XXLT9
I couldnt find the XXLT9 it only goes till XXLT6. Any suggestions pls?
Thanks in advace
Razgrizzz said:
Hi Guys, I have the same problem. I dont know which version to download. My droid is runing:
Kernel
3.0.31-1103517
But te Build Number is JZ054K.N7000XXLT9
I couldnt find the XXLT9 it only goes till XXLT6. Any suggestions pls?
Thanks in advace
Click to expand...
Click to collapse
Try to XXLTA version.
Found The XXLT9
nokiamodeln91 said:
Try to XXLTA version.
Click to expand...
Click to collapse
In the mean time I managed to find the XXLT9 but when I tried to install it it s giving me a Signature Verification Failed error. Any ideas?
Use XXLTA
User_99 said:
Use XXLTA
Click to expand...
Click to collapse
Ok Thanks will try that tonight
Thanks a lot for your help guys
User_99 said:
Use XXLTA
Click to expand...
Click to collapse
Hi guys I finaly had some time to try the XXLTA but stil giving me a Signature Verification Failed error!
I downloaded the xxla from here: d-h.st/users/philz_touch/?fld_id=25295#files
and do you know somthing about these files?
goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000/
Thanks in advance
Use odin to flash the kernel. If you intend to root your rom, after flashing the kernel you will need to flash supersu from recovery.
nokiamodeln91 said:
Use odin to flash the kernel. If you intend to root your rom, after flashing the kernel you will need to flash supersu from recovery.
Click to expand...
Click to collapse
Thank you all Guys it worked
i installed philz recovery yesterday after which i bricked my n7000 while i tried installing the C-Rom .
I just now used ODIN to get back to my STOCK ROM that is 2.3.6.
Its really interesting to see how i can just go back to the first firmware my phone came with :angel:
Please suggest me a combination of a custom recovery & a custom ROM without getting bricked .
as im new to this open source & trying new things for my phone ,i would like to try something according to your experiences .
Something which is stable ,smooth and latest !!
Thanks !!
i have read many many posts and whenever i try to install any recovery, i get E:verification failed !!
what am i doing wrong !! Please help !!
rajk53 said:
i installed philz recovery yesterday after which i bricked my n7000 while i tried installing the C-Rom .
I just now used ODIN to get back to my STOCK ROM that is 2.3.6.
Its really interesting to see how i can just go back to the first firmware my phone came with :angel:
Please suggest me a combination of a custom recovery & a custom ROM without getting bricked .
as im new to this open source & trying new things for my phone ,i would like to try something according to your experiences .
Something which is stable ,smooth and latest !!
Thanks !!
i have read many many posts and whenever i try to install any recovery, i get E:verification failed !!
what am i doing wrong !! Please help !!
Click to expand...
Click to collapse
While on GB you cannot install any kernel from recovery.. only using Odin. . You have to be either on ICS or JB to be able to follow Philz kernel install steps.
nokiamodeln91 said:
While on GB you cannot install any kernel from recovery.. only using Odin. . You have to be either on ICS or JB to be able to follow Philz kernel install steps.
Click to expand...
Click to collapse
First of all, Thanks a lot for your reply. Now i understand why and how my several attempts failed
now i clearly understand that if im on JellyBean , then i can install kernel from recovery.
I just updated my phone to JellyBean using the official update option in the phone.
Can you please direct me to the right link to install kitkat rom from using odin .
rajk53 said:
First of all, Thanks a lot for your reply. Now i understand why and how my several attempts failed
now i clearly understand that if im on JellyBean , then i can install kernel from recovery.
I just updated my phone to JellyBean using the official update option in the phone.
Can you please direct me to the right link to install kitkat rom from using odin .
Click to expand...
Click to collapse
KK cannot be installed using Odin as its a custom rom.. As you are on JB, root it using one of the Philz kernels matching your rom build number (post 3 or Philz thread TW).. The flash raw r4 kernel, boot into its recovery and then flash KK roms.
nokiamodeln91 said:
KK cannot be installed using Odin as its a custom rom.. As you are on JB, root it using one of the Philz kernels matching your rom build number (post 3 or Philz thread TW).. The flash raw r4 kernel, boot into its recovery and then flash KK roms.
Click to expand...
Click to collapse
Thanks a lot for the information
I checked the link ,i found this kernel to be matching with my build number.
PhilZ-cwm6-XXLRK-XEU-v2.7
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !
rajk53 said:
Thanks a lot for the information
I checked the link ,i found this kernel to be matching with my build number.
PhilZ-cwm6-XXLRK-XEU-v2.7
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !
Click to expand...
Click to collapse
And I can add an old baby bottle for free...
ThaiDai said:
And I can add an old baby bottle for free...
Click to expand...
Click to collapse
Please kindly just reply by answering the specifically asked question regarding the kit kat rom.
I am in a confused state as i can see there are a huge amount of ROMs available many are nightly made, which say them to be not in a stable state.
Found the SlimKat in the forum ,downloading the ROM SlimSaber-n7000-4.4.2-20140531.zip 139mb
Installation instructions..
Download the latest build from [here]
Gapps ( if you don't have it already) from [here]
!Recommended! Full wipe, and manual format /system
Flash ROM and the gapps you want, reboot
Maybe a silly question but ,Do i need to download the gapps files & why ??
rajk53 said:
Please kindly just reply by answering the specifically asked question regarding the kit kat rom.
Click to expand...
Click to collapse
Please kindly start to grow up and read and learn yourself. Do not expect spoon-feeding from other members.
This is a development forum. It is not expected that you are a developer but it would be a sign of respect to read their threads and follow their instructions - they spent a lot of their time writing them. And if you not understand then try to use the search.
Should i now install it using the recovery ?
Also please let me know what do you mean by "The flash raw r4 kernel" ( is this the kernel im currently installing ?)
After installation, please suggest me a KK ROM !
Click to expand...
Click to collapse
Not one of these questions show anything of this:
the first is part of the installation instructions.
the second can be found with the search (and was answered thousands of times)
the third is simply against XDA rules
To flash a kitkat rom, the recovery needs to be compatible with SE linux.
The recovery is part of a kernel
To flash a kitkat rom you need to flash a recent kernel first.
Try flashing raw kernel r4,r5, or Forest-CM11. it does not matter that they are incompatible with your current or future roms, they will get overwritten when you flash a rom (roms include kernels).
Then reboot recovery or restart phone and enter recovery again.
Then you wipe cache, data, and system.
Then flash the kitkat rom of choice.
gapps
Azeazezar said:
To flash a kitkat rom, the recovery needs to be compatible with SE linux.
The recovery is part of a kernel
To flash a kitkat rom you need to flash a recent kernel first.
Try flashing raw kernel r4,r5, or Forest-CM11. it does not matter that they are incompatible with your current or future roms, they will get overwritten when you flash a rom (roms include kernels).
Then reboot recovery or restart phone and enter recovery again.
Then you wipe cache, data, and system.
Then flash the kitkat rom of choice.
Click to expand...
Click to collapse
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?
rajk53 said:
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/search.php?searchthreadid=2770097
rajk53 said:
Thanks a lot for the explanation,
I installed slim ROM but i didnot like it . where can i find the simplest basic KK ROM without any mods ?
Click to expand...
Click to collapse
https://source.android.com/
Hi, so unfortunately I'd flash the new samsung bootloader (the 4.4 one) and now I can't flash a custom kernel (e.g. : pureCM), it just boot into a black screen
I can just boot on latest Samsung roms with official kernel ans CM/CM derivatives with the stock kernel that comes with
So do someone knows what to do? Is there a way to go back to the old bootloader or to flash these kernels?
Thanks in advance and sorry if I mispelled some words !
both boeffla and agni don't work? Maybe this should be directed to @Hbohd since @psndna88 has no phone atm
kouss77550 said:
Hi, so unfortunately I'd flash the new samsung bootloader (the 4.4 one) and now I can't flash a custom kernel (e.g. : pureCM), it just boot into a black screen
I can just boot on latest Samsung roms with official kernel ans CM/CM derivatives with the stock kernel that comes with
So do someone knows what to do? Is there a way to go back to the old bootloader or to flash these kernels?
Thanks in advance and sorry if I mispelled some words !
Click to expand...
Click to collapse
Do you know which bootloader it is - XXUFNI3 or XXUFNJ1? (It should be the same as your baseband unless you flashed a new modem).
ArkThompson said:
Do you know which bootloader it is - XXUFNI3 or XXUFNJ1? (It should be the same as your baseband unless you flashed a new modem).
Click to expand...
Click to collapse
My baseband is XXUFNI3 and I haven't flashed another modem so my bootloader should be the same I guess
chongc1996 said:
both boeffla and agni don't work? Maybe this should be directed to @Hbohd since @psndna88 has no phone atm
Click to expand...
Click to collapse
So I just flashed everything from zero. I reflash samsung official rom through Odin, reflashed crDroid and finally flashed Boeffla kernel, and it worked great ! Guess maybe the boeffla kernel I first downloaded was corrupted or maybe something else. Anyway, thanks a lot!