alright, hi, guise.
im new to the forums, but not new to rooting. ive sucessfully rooted many devices of my own, and others. however. ive run into a kind of unique problem. i didnt read the description of an ICS rom, and it ended up being a droid 3 rom. not a bionic rom. so, i wiped everything out, and i mean EVERYTHING, and rebooted for some stupid reason. now im stuck on a bootloop. all that pops up, is the m logo. i cant get into my clockwork mod, and my battery is dead. ive been trying to use a direct wire charging method for the battery, but to no avail. is there ANY WAY i can restore my phone?
You can try this:
How to UNBRICK Factory Reset Droid Bionic via FXZ files:
http://youtu.be/tAd7XzL76CA
but you will need a battery at least 80% full
Or this:
http://forum.xda-developers.com/showthread.php?t=1262540
There is another way also on you tube search for easy unbrick factory reset droid bionic one click fastboot restore tutorialhow to. No RSD needed.
thank you, sir!
is there any way to charge the phone, while its bricked? or should i continue to try and not fry it with open wires?
.x0mb3 said:
thank you, sir!
is there any way to charge the phone, while its bricked? or should i continue to try and not fry it with open wires?
Click to expand...
Click to collapse
I have never done it myself but the open wire seems to be what people do just be carefull not to over charge it.
Good luck!
Few options:
1. Find someone with a bionic that will let you charge your battery in their phone.
2. Go to verizon and see if they can charge your battery.
3. Buy an extra battery (they usually come with enough charge to restore your phone).
4. Buy an external battery charger.
5. Buy a motorola factory flash cable. This type of cable has a different pin out and has the +5v on pin 1 which bypasses the battery and powers the device directly even without a battery inserted at all. here is a link... http://shop.teamblackhat.info/
I rooted my phone and unlock bootloader with CWM 6.0.4.4 I added a custom the latest nightligh kit kat 4.4.2 to my atrix HD after 2 days the phone wast charging and the battery icon has a question mark(?) and the phone says battery unknow it wont charge at all., I don't know if this was after I formated the system,data,persist and firmware I am new to this and started messing around with everything,I tried rsd lite but I dont have enough charge to inizilate sow I really don't know what to do.Sow if anyone can help me I will be thankfull
Q&A for Unbrick Hard Bricked Moto G (2nd.Gen) [5.0/4.4.4]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Unbrick Hard Bricked Moto G (2nd.Gen) [5.0/4.4.4]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
A little different brick of my Moto G 2nd gen(XT-1068).plz help
Hi ,
Please dont ignore my mail just bcoz its too long. I have been following this thread from four to five days. Will you please help me ? Just have a look at my problem. I have been rooting my android phones and have good experience of testing , rooting the handsets. Recently I flashed my Moto G ( xt-1068 ) with lolipop because i was not able to wait till motorolla release it.
I tested it for few days , and successfully downgraded back to 4.4.4 kitkat. It was all fine. I love MIUI so I started my work to port MIUI over our favourite Moto G . I even ported it and was not booting. So I edited updter-script and was trying to flash it back on my xt-1068.
Now the mistake that happened was , due to some error in the script , It aborted the installation. When i checked the log from CWM , It has crossed partitioning and it aborted while extracting the directorties. By mistake I restarted the phone and since the partitions were flashed and there was nothing to execute , my phone is stuck. Its not even starting . Its getting recognised as "qhsusb_bulk". Thts why i came over this thread and tried to follow the procedure you have mensioned.
I am also getting the same error like while flaashing with blank-flash : FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame) and FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet) .
So do i have the same problem that happened with theses guys who tried to downgrade their handsets from Lolipop to kitkat ? If its so , should I also wait for Lolipop release by moto ? or will i have some other problem ? Do you have any solution ? I was really wanted to make MIUI available for our Moto G . I don't feel sad for bricking of m phone but what ifeel sad is I want it back. I can't pass my day without it. i am missing it. Please can you suggest me wht should I do ?
Thanks in advance.
DONT WORK FOR ME :s
I have a moto g 2014 XT1063 and after unlocking the bootloader the phone work well for a minutes. Then i power off the phone and when i try to turn on again the phone is die :S no custom no bootloader dont charge dont vibrate not nothing uu. i try this tutorial but when i run the blankflash he trhrow me a error :/ please help me
Moto G hard brick
Someone please help all of us who have wrongly hard bricked our lovely Moto G 2014 . The blankflash is giving "Error sending packet" error. We all will be really thankful of you. Please help. Although some Devs say that we will have to wait for lolipop, but Moto G 2014 has already 5.0 available. Someone please check this thread and solve the problem.....plz..
link : http://forum.xda-developers.com/moto-g-2014/development/unbrick-hard-bricked-moto-g-2nd-gen-5-0-t2966010
same problem
Hi, i have an moto g xt1068 too and din't power on since yesterday hope to find a solution is hard bricked too.
i bricked mine.problem is the code 43 wich it won t recognize at all the device whatever driver i use.
altho it wont boot black screen i dont know if it charge or not, PC will recognize as device once i press volumedown+power button.
wich on my opinion he works somehow but it isn t recognized bt the windows 7.
i will install a fresh copy of win7 and check again maybe is just a failure from windows.
any other advices feel free to share.
firmwares
do someone has the moto g 2gen firmwares on extention .tar.gz i need them to fix my phone
Help!!
Hi people.
Well, only 2 weeks ago I got my Moto G XT1063 and I unlocked bootloader to install Soak Test of Android 5.0.2 with RetailUSA firmware. (My device's original firmware, was for Claro Colombia).
It worked well, I got it running perfect. Yesterday I saw that official/final version of 5.0.2 was available for my device with RetailUSA firmware, but I needed to do a downgrade to KitKat first, because it wouldn't work if I was in Soak Test yet.
So I made the downgrade, and it was running well, I checked for updates, and there was no updates availables, so I decided to reboot, to see if it may make the update appear. But after turning off my device, and trying to turn it on again, just nothing happened.
Now, my device doesn't want to turn on, neither in fastboot mode. And now, I don't know what to do here. So I would be really thankful for any help provided.
Thanks in advance. Have a nice day.
So here is what happened,
My phone was maybe 14% plugged it in left it charging and went to sleep.
Woke up with the phone alarm and started reading whatsapp messages, at this point the phone was already at 100%.
Maybe 30-40 seconds later, with the cable still plugged in the phone turned off, with no message, it just "died".
Now it wont boot, fastboot, nothing.
Tried some solutions i found on the internet like holding vol down + power button for more than 2 minutes, and nothing.
I really need some help here guys, PLEASE.
The phone was running latest TITAN PRIME ROM 1.1 dev3
Everything will be appreciated, thanks in advance.
partitions whacked out?
It seems I am unable to flash anything probably due to partitions broken. When I try to do a fastboot flash, It results in OKAY, but it has no effect on the device. I tried to flash the gpt.bin to partition, but the problem remains. Is there any way to repair the partitions? I tried to format in fastboot, I get the error "formatting is not supported for filesystem with type 'raw'". I am also unable to change format from recovery. All ideas welcome!
This issue came up after my phone went battery empty.
arvinoids said:
It seems I am unable to flash anything probably due to partitions broken. When I try to do a fastboot flash, It results in OKAY, but it has no effect on the device. I tried to flash the gpt.bin to partition, but the problem remains. Is there any way to repair the partitions? I tried to format in fastboot, I get the error "formatting is not supported for filesystem with type 'raw'". I am also unable to change format from recovery. All ideas welcome!
This issue came up after my phone went battery empty.
Click to expand...
Click to collapse
Same here, also due to 0% battery.
Seems these phones do not shutdown early enough before the battery voltage drops below spec. ****ty engineering.
Please, someone help us for the sake of god.
There are several people with this problem and we don't know how to fix it.
Is there any possibility, any help, anything we could test would be welcome.
Phone Moto G 2014 not turning on after flashing BlissPOP ROM
i flashed "BlissPop-v3.6-titan-OFFICIAL-20150629-1948" ROM to my Moto G 2014 Model and Rebooted after.Unfortunately phone doesnt turn on.Even unable to open Recovery Mode also. Can some one tell me a solution. My phone was unlocked,rooted and TWRP flashed too...
Im too facing the same issue.. the device is not turning on.... i jus unplugged from the charger but before putting the device for charging it was 67% battery... after unplugged the device screen jus turned into black i tot,the screen went to sleep but later the device dint turn on..... plzzzzzz guys any1 has any solutions??????????
I followed according to this thread http://forum.xda-developers.com/moto-g-2014/general/unbrick-hard-bricked-moto-g-2nd-gen-5-0-t2966010 but nothing worked....
Gave my Bricked Moto G 2nd Gen to Moto Service Center
Hey folks... I tried giving my Bricked phone to nearby local mobile repair shop and even they were of no help.They were of assumption that its a motherboard issue. Seriously i still cant digest that . How come flashing a ROM in your mobile screw up the Motherboard. I appreciate if someone can throw some light on this.
Anyways i gave my bricked phone to Motorolla Service Center yesterday as Warranty is still there.I acted dump infront of them and told Godamm it!!My phone doesnt turn on all of a sudden. They took my phone and asked me to wait for 3 days till they can figure out What in the name of God has happend to my Phone. I will let you folks know if i get a replacement ....
lijuram said:
Hey folks... I tried giving my Bricked phone to nearby local mobile repair shop and even they were of no help.They were of assumption that its a motherboard issue. Seriously i still cant digest that . How come flashing a ROM in your mobile screw up the Motherboard. I appreciate if someone can throw some light on this.
Anyways i gave my bricked phone to Motorolla Service Center yesterday as Warranty is still there.I acted dump infront of them and told Godamm it!!My phone doesnt turn on all of a sudden. They took my phone and asked me to wait for 3 days till they can figure out What in the name of God has happend to my Phone. I will let you folks know if i get a replacement ....
Click to expand...
Click to collapse
Please let me know because also I've bricked my device & want to send it to nearest authorized service center.
lijuram said:
Hey folks... I tried giving my Bricked phone to nearby local mobile repair shop and even they were of no help.They were of assumption that its a motherboard issue. Seriously i still cant digest that . How come flashing a ROM in your mobile screw up the Motherboard. I appreciate if someone can throw some light on this.
Anyways i gave my bricked phone to Motorolla Service Center yesterday as Warranty is still there.I acted dump infront of them and told Godamm it!!My phone doesnt turn on all of a sudden. They took my phone and asked me to wait for 3 days till they can figure out What in the name of God has happend to my Phone. I will let you folks know if i get a replacement ....
Click to expand...
Click to collapse
I got my device from service centre n got motherboard replaced with warranty... But got updated to new firmware ss below....
Sent from my XT1068 using XDA Free mobile app
moto g2 shows qhsusb bulk plz somebody help
hello friends.. i don't have Rif JTAG box....to unbrick my moto g2
If anybody have box plz help me...& repaire my mobile bootloader
I will pay for this....plz help help help.......call me on this no.
9465351811
state punjab distt patiala teh nabha
vpo :CHHINTANWALA
exactly same problem.
lijuram said:
i flashed "BlissPop-v3.6-titan-OFFICIAL-20150629-1948" ROM to my Moto G 2014 Model and Rebooted after.Unfortunately phone doesnt turn on.Even unable to open Recovery Mode also. Can some one tell me a solution. My phone was unlocked,rooted and TWRP flashed too...
Click to expand...
Click to collapse
i have through exactly same thing. my phone was working exellently on blisspop rom and got bricked once i installed an addon.
now i want to know what u did after tht.
not to mention i dnt have warranty now.
wanna listern to a person going through same ****.
Hello frnds ....my bro have moto g 2nd gen running on lollipop with unlock bootloader rooted and twrp recovery. yesterday i flashed resurrection rom. every thing ok today i reflashed stock lollipop rom by restoring nandroid backup... Today my bro in my absence trying to flash again resurrection rom. my bro is totally noob ...he flash kernel instand of rom which is not compatible with this rom and phone get hard brick .....i has been tried this method but nothing heppened ....plzzz give me solution plzzzzzzzzz
Hello,
I installed CM12 Stock ROM into the slot by mistake (yes kill me now PLEASE).
This supposedly changed the bootloader so I need to update jellybean bootloader to install something 2.x.
I had prepared the phone in Fastboot and before I downloaded bootloader the phone turned off, and now it won't do absolutely anything.
No combination of keys won't turn it on.Display does not come on after connecting to the USB / wall socket - not even the green light.
I tried a my friend's battery (fully charged) and also nothing.
Can I do anything at this moment except just throw it away ? (I am in CZ so visit Verizon is out of question).
I read there should be some special USB cable from Morotola and it allows flash without batteries (stupid?).
Thanks for the tips.
n31k said:
Hello,
I installed CM12 Stock ROM into the slot by mistake (yes kill me now PLEASE).
This supposedly changed the bootloader so I need to update jellybean bootloader to install something 2.x.
I had prepared the phone in Fastboot and before I downloaded bootloader the phone turned off, and now it won't do absolutely anything.
No combination of keys won't turn it on.Display does not come on after connecting to the USB / wall socket - not even the green light.
I tried a my friend's battery (fully charged) and also nothing.
Can I do anything at this moment except just throw it away ? (I am in CZ so visit Verizon is out of question).
I read there should be some special USB cable from Morotola and it allows flash without batteries (stupid?).
Thanks for the tips.
Click to expand...
Click to collapse
Cm12 does not change the bootloader, stock slot or not.
Cm12 installs fine on stock slot, if done correctly.
Sometimes when the Droid 4 is in AP fastboot mode it will power off after a few minutes of no activity.
Don't know what is causing the no boot option, if battery is charge.
the most common cause that hard bricks the Droid 4, is Flashing official firmware for a Razr xt912
Did you install Motorola Drivers?
Does Droid 4 show up in Device Manager?
See
Moto Drivers, RSD Lite, and other Unbricking Tools
http://forum.xda-developers.com/general/rooting-roms/motorola-usb-drivers-rsd-lite-firmware-t3042687
Sent from my XT912 using Tapatalk
Thats the thing, the phone is not visible anywhere (Windows device manager, Linux lsusb).
I think that in this case none of the tools would help me (or it will ?)
n31k said:
Thats the thing, the phone is not visible anywhere (Windows device manager, Linux lsusb).
I think that in this case none of the tools would help me (or it will ?)
Click to expand...
Click to collapse
If Droid 4 will not connect to pc, you cannot flash firmware.
You can try a fastboot cable, but don't think that will help.
Motorola Fastboot/Factory Programming Cables Links
Sent from my XT912 using Tapatalk
Well I guess that changing the board is a way to go
If you press "Down", "Up" and "On" button - do you have menu?
Fervi
Hi please i need a help. I bricked my droid by Flashing official firmware for a Razr xt912 now the phone don't boot help please.
patsonator said:
Hi please i need a help. I bricked my droid by Flashing official firmware for a Razr xt912 now the phone don't boot help please.
Click to expand...
Click to collapse
Which bootloader version was on the phone?
Edit: Miss read thread title,
If you flashed droid razr firmware on your droid 4, there is no fixing
Sent from my Atom using XDA Labs
Hi
A few weeks later, I wanted to install a new Android 6.0 on my phone. I have made root by kingroot and I wanted to install custom recovery, so I install new cwm and reboot device. But, my lg was completely dead and I cannot go to any mode. When I plugging it into my computer, it detecting only 64 mb memory. Another thing is about battery. When it discharge two days after it, the device was saying that it is 0%. My lg were in my local service but they can't help me. And I have a question. Can I bring it to life, maby in download mode without deconstructing it? I'am really scared because of the deconstruction made it that guide http://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429 .