Related
Sad day today....all was well, tried to play around with Swap memory and then the trouble started,
First all the data on my SD card got wiped out !
After that the phone just went dead, no led when connected to charge,screen was dead no light, flicker of any sort, removed battery and tried many times still no luck...
suspected it could be a software problem so connected to to SUT, a phone was detected, tried completing the stock ROM reload, went to certain extent but then resulted in FAIL
Post that now I get a led red light when connected to charger but nothing else. does not go into download mode or battery charging animation.
Tried SUT once again but this time there is no phone detected.....
not sure if it is battery / handset problem....did the core areas in the phone get corrupted while playing with Swap ???
I partitioned using CWM, used Swapper2 app, all went well till I realised that data in SD was wiped clean.
Was on sharp mod...missing the phone badly...any help or guidance will be much appreciated...
Also will visit to service center help now that this phone is completely off SPICE stores ? yes it is still under "Warranty"
had to switch back to blackberry yucksss !!...for sometime I was infact trying to touch the screen
hoping to hear soon from you guys !!!!
First of all very sad to hear, My heartfelt condolences....
At this stage after trying SUT for multiple times, I think a visit to Spice service center is the only solution, please try it and update here
Be ready to part with your phone for a week atleast
BACK in BUSINESS
I got it Back folks.....thanks to SUT & Windows.....was breaking my head on what could be wrong...retraced back all my steps....
checked if the device has been wrongly configured by windows....went to device manager...lo I saw there was "Other Device" with something registered as Qualcomm CDMA. Deleted it...removed the usb and reconnected.....
Windows did a fresh installation of the device...after sometime I could see F drive of the device with image folder and all its contents....
Simply ran SUT once again, even now there was no display, just a gut feel everything will proceed smoothly....and yes SUT detected the device went through the installation. At one step it also asked if it could format F drive....I went ahead pressing OK....SUT finished successfully...after few anxious moments saw the familiar battery charging icon ......My day was made....and after few more anxious moments....I pressed power button to see SHARP Loading....my device is reborn again !
lesson learnt.....Don't play with SWAP mem, let the dev folks figure out and guide us...
If in any trouble keep SUT and preferrably Stock NB0 file handy.
Back in business folks !!
well done bro, was following your situation closely, so glad your phone is back to normal.
Sent from my SH8188U using xda premium
Glad that it works
Great job done
Sent from my Desire HD using xda premium
I will note your experience. Because I am a newbie who tend to do stupid things may be experiencing the same thing. Glad you can solved it and thanks for sharing.
Device still bricked
Hi, I have the same problem. My device (spice mi-410) suddenly stopped working. screen is blank, without power. It wont start in recovery or download mode. It wont charge. Only red led when connected to charger. That red led comes even when battery is not placed in the device and charger is connected. When i connect it to pc, windows detect it as HUAWEI Mobile Connect - Bus Enumerate Device in USB controllers. F disk is not visible nor can SUT detect it. Guess I am struck. This thing happened without me doing anything. It was working properly till night, just saw the device in the morning in this state. I had flashed official .nb0 few months back and the device was working flawlessly till now. Sending it to repairs to spice service centre is out of question (as it is out of warranty), nor those idiots know anything, they just gave me an estimate of INR 9k for repairs without seeing the device.
Any help appreciated.
9K OMG without looking at the phone
ya that idiot has fu***-up my phone earlier too. few months back my glass cracked, although the phone kept working fine. he changed the glass and returned the phone 2 months later, with all signs of ra**e been committed on phone. they never knew anything about the phone and were surprised to see such a huge device from spice. so they tried all there *tools* to pry it open before realizing that what damage they have done. my gps stopped working since then, they refused to fix it saying that as the phone has been *opened* (ra**d by them) it is out of warranty, although it was still under warranty.
And now this has happened.
Mod edit : dont use any abusive words its against the forum rules if u do need to use them i have edited ur post OK
forthe said:
Hi, I have the same problem. My device (spice mi-410) suddenly stopped working. screen is blank, without power. It wont start in recovery or download mode. It wont charge. Only red led when connected to charger. That red led comes even when battery is not placed in the device and charger is connected. When i connect it to pc, windows detect it as HUAWEI Mobile Connect - Bus Enumerate Device in USB controllers. F disk is not visible nor can SUT detect it. Guess I am struck. This thing happened without me doing anything. It was working properly till night, just saw the device in the morning in this state. I had flashed official .nb0 few months back and the device was working flawlessly till now. Sending it to repairs to spice service centre is out of question (as it is out of warranty), nor those idiots know anything, they just gave me an estimate of INR 9k for repairs without seeing the device.
Any help appreciated.
Click to expand...
Click to collapse
Hi Pretty similar to the problem I had, try and do the following
Try to use the newer SUT (1.8) version, search in this forum and you will get the link. If you are on it great.
Keep the nb0 file of any original rom - Spice GB on .32 kernel or Sharp GB on .35 kernel
connect the device with battery (hopefully charged well) to your computer, let windows detect it, launch your SUT, if you see a phone connected you are in luck !...just proceed with the next steps of by selecting the nb0 file, and selecting erase all user data.
SUT will prompt that your F disk is gone bad and do you need to reinstall it, select yes and let SUT do its stuff.
This will 100% load the ROM and F disk stuff and device will boot into the ROM once you finish.
In case SUT is not showing A phone is connected, restart your computer, ensure no other application is running, clear all earlier recognized devices in Device Manager and start fresh by connecting the device again.
vijayar said:
Hi Pretty similar to the problem I had, try and do the following
Try to use the newer SUT (1.8) version, search in this forum and you will get the link. If you are on it great.
Keep the nb0 file of any original rom - Spice GB on .32 kernel or Sharp GB on .35 kernel
connect the device with battery (hopefully charged well) to your computer, let windows detect it, launch your SUT, if you see a phone connected you are in luck !...just proceed with the next steps of by selecting the nb0 file, and selecting erase all user data.
SUT will prompt that your F disk is gone bad and do you need to reinstall it, select yes and let SUT do its stuff.
This will 100% load the ROM and F disk stuff and device will boot into the ROM once you finish.
In case SUT is not showing A phone is connected, restart your computer, ensure no other application is running, clear all earlier recognized devices in Device Manager and start fresh by connecting the device again.
Click to expand...
Click to collapse
hi
this is just my exp i had to use the old sutL3 which is the old 1.7.3
to flash the original India update of the 2.3 it did not work on the 1.8
this is based on my experience when i flashed back the orignal to sell the same and get the one V . I could be wrong do correct me if so but i did this just around 2 weeks back:laugh:
haree said:
hi
this is just my exp i had to use the old sutL3 which is the old 1.7.3
to flash the original India update of the 2.3 it did not work on the 1.8
this is based on my experience when i flashed back the orignal to sell the same and get the one V . I could be wrong do correct me if so but i did this just around 2 weeks back:laugh:
Click to expand...
Click to collapse
You could be right, if I recollect I infact flashed directly Sharp Stock ROM when I was facing the same problem. ....
btw how is HTC ONE V....you could have invested in a device with more RAM If I am not wrong this is with 512
vijayar said:
You could be right, if I recollect I infact flashed directly Sharp Stock ROM when I was facing the same problem. ....
btw how is HTC ONE V....you could have invested in a device with more RAM If I am not wrong this is with 512
Click to expand...
Click to collapse
hi
its ok budget buddy i didnt have much money and only the spice guy was giving me the buy back :laugh:
Phone not detected
I tried all the methods mentioned above on two different PC's. The Problem is that the phone is detected as "USB Input Device". The driver is provided by SUT. When it says device driver installed it shows as "usb input device" and the red notification LED glows. This happens whether or not battery is inserted. I charged the battery externally too.
Any Solutions?
I bought the phone only 3 months ago... The version I had wasn't fast enough so I installed a new rom instead... The rom I installed was even slower so I tried putting another and I accidentally wiped all my data and cause my phone to get into brick mode...
I managed to solve the problem and a vibrant rom is now on my phone...
The problem now is that I want to replace that rom and I found out that every time I connect it to the computer with USB cable or plug it to the wall the phone goes off and a sign of empty battery apears with loading dots...
I tried to switch to a new battery and I realized it's not the problem...
I took the phone to a special lab to fix it and they told me they won't fix it cause there is a component inside that handeling with it may cause the phone to totally die...
I don't know who to turn to...
Please help!
wiping data doesnt make ur fone bricked. give us some info about ur problem, ur fone variant, usage of odin or how u flash or any other that could be used for us to answer or help u.
its like u asking me to marry u as if i know ur gender
Q&A for Unbrick Hard Bricked Moto G (2nd.Gen) [5.0/4.4.4]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Unbrick Hard Bricked Moto G (2nd.Gen) [5.0/4.4.4]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
A little different brick of my Moto G 2nd gen(XT-1068).plz help
Hi ,
Please dont ignore my mail just bcoz its too long. I have been following this thread from four to five days. Will you please help me ? Just have a look at my problem. I have been rooting my android phones and have good experience of testing , rooting the handsets. Recently I flashed my Moto G ( xt-1068 ) with lolipop because i was not able to wait till motorolla release it.
I tested it for few days , and successfully downgraded back to 4.4.4 kitkat. It was all fine. I love MIUI so I started my work to port MIUI over our favourite Moto G . I even ported it and was not booting. So I edited updter-script and was trying to flash it back on my xt-1068.
Now the mistake that happened was , due to some error in the script , It aborted the installation. When i checked the log from CWM , It has crossed partitioning and it aborted while extracting the directorties. By mistake I restarted the phone and since the partitions were flashed and there was nothing to execute , my phone is stuck. Its not even starting . Its getting recognised as "qhsusb_bulk". Thts why i came over this thread and tried to follow the procedure you have mensioned.
I am also getting the same error like while flaashing with blank-flash : FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame) and FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet) .
So do i have the same problem that happened with theses guys who tried to downgrade their handsets from Lolipop to kitkat ? If its so , should I also wait for Lolipop release by moto ? or will i have some other problem ? Do you have any solution ? I was really wanted to make MIUI available for our Moto G . I don't feel sad for bricking of m phone but what ifeel sad is I want it back. I can't pass my day without it. i am missing it. Please can you suggest me wht should I do ?
Thanks in advance.
DONT WORK FOR ME :s
I have a moto g 2014 XT1063 and after unlocking the bootloader the phone work well for a minutes. Then i power off the phone and when i try to turn on again the phone is die :S no custom no bootloader dont charge dont vibrate not nothing uu. i try this tutorial but when i run the blankflash he trhrow me a error :/ please help me
Moto G hard brick
Someone please help all of us who have wrongly hard bricked our lovely Moto G 2014 . The blankflash is giving "Error sending packet" error. We all will be really thankful of you. Please help. Although some Devs say that we will have to wait for lolipop, but Moto G 2014 has already 5.0 available. Someone please check this thread and solve the problem.....plz..
link : http://forum.xda-developers.com/moto-g-2014/development/unbrick-hard-bricked-moto-g-2nd-gen-5-0-t2966010
same problem
Hi, i have an moto g xt1068 too and din't power on since yesterday hope to find a solution is hard bricked too.
i bricked mine.problem is the code 43 wich it won t recognize at all the device whatever driver i use.
altho it wont boot black screen i dont know if it charge or not, PC will recognize as device once i press volumedown+power button.
wich on my opinion he works somehow but it isn t recognized bt the windows 7.
i will install a fresh copy of win7 and check again maybe is just a failure from windows.
any other advices feel free to share.
firmwares
do someone has the moto g 2gen firmwares on extention .tar.gz i need them to fix my phone
Help!!
Hi people.
Well, only 2 weeks ago I got my Moto G XT1063 and I unlocked bootloader to install Soak Test of Android 5.0.2 with RetailUSA firmware. (My device's original firmware, was for Claro Colombia).
It worked well, I got it running perfect. Yesterday I saw that official/final version of 5.0.2 was available for my device with RetailUSA firmware, but I needed to do a downgrade to KitKat first, because it wouldn't work if I was in Soak Test yet.
So I made the downgrade, and it was running well, I checked for updates, and there was no updates availables, so I decided to reboot, to see if it may make the update appear. But after turning off my device, and trying to turn it on again, just nothing happened.
Now, my device doesn't want to turn on, neither in fastboot mode. And now, I don't know what to do here. So I would be really thankful for any help provided.
Thanks in advance. Have a nice day.
So here is what happened,
My phone was maybe 14% plugged it in left it charging and went to sleep.
Woke up with the phone alarm and started reading whatsapp messages, at this point the phone was already at 100%.
Maybe 30-40 seconds later, with the cable still plugged in the phone turned off, with no message, it just "died".
Now it wont boot, fastboot, nothing.
Tried some solutions i found on the internet like holding vol down + power button for more than 2 minutes, and nothing.
I really need some help here guys, PLEASE.
The phone was running latest TITAN PRIME ROM 1.1 dev3
Everything will be appreciated, thanks in advance.
partitions whacked out?
It seems I am unable to flash anything probably due to partitions broken. When I try to do a fastboot flash, It results in OKAY, but it has no effect on the device. I tried to flash the gpt.bin to partition, but the problem remains. Is there any way to repair the partitions? I tried to format in fastboot, I get the error "formatting is not supported for filesystem with type 'raw'". I am also unable to change format from recovery. All ideas welcome!
This issue came up after my phone went battery empty.
arvinoids said:
It seems I am unable to flash anything probably due to partitions broken. When I try to do a fastboot flash, It results in OKAY, but it has no effect on the device. I tried to flash the gpt.bin to partition, but the problem remains. Is there any way to repair the partitions? I tried to format in fastboot, I get the error "formatting is not supported for filesystem with type 'raw'". I am also unable to change format from recovery. All ideas welcome!
This issue came up after my phone went battery empty.
Click to expand...
Click to collapse
Same here, also due to 0% battery.
Seems these phones do not shutdown early enough before the battery voltage drops below spec. ****ty engineering.
Please, someone help us for the sake of god.
There are several people with this problem and we don't know how to fix it.
Is there any possibility, any help, anything we could test would be welcome.
Phone Moto G 2014 not turning on after flashing BlissPOP ROM
i flashed "BlissPop-v3.6-titan-OFFICIAL-20150629-1948" ROM to my Moto G 2014 Model and Rebooted after.Unfortunately phone doesnt turn on.Even unable to open Recovery Mode also. Can some one tell me a solution. My phone was unlocked,rooted and TWRP flashed too...
Im too facing the same issue.. the device is not turning on.... i jus unplugged from the charger but before putting the device for charging it was 67% battery... after unplugged the device screen jus turned into black i tot,the screen went to sleep but later the device dint turn on..... plzzzzzz guys any1 has any solutions??????????
I followed according to this thread http://forum.xda-developers.com/moto-g-2014/general/unbrick-hard-bricked-moto-g-2nd-gen-5-0-t2966010 but nothing worked....
Gave my Bricked Moto G 2nd Gen to Moto Service Center
Hey folks... I tried giving my Bricked phone to nearby local mobile repair shop and even they were of no help.They were of assumption that its a motherboard issue. Seriously i still cant digest that . How come flashing a ROM in your mobile screw up the Motherboard. I appreciate if someone can throw some light on this.
Anyways i gave my bricked phone to Motorolla Service Center yesterday as Warranty is still there.I acted dump infront of them and told Godamm it!!My phone doesnt turn on all of a sudden. They took my phone and asked me to wait for 3 days till they can figure out What in the name of God has happend to my Phone. I will let you folks know if i get a replacement ....
lijuram said:
Hey folks... I tried giving my Bricked phone to nearby local mobile repair shop and even they were of no help.They were of assumption that its a motherboard issue. Seriously i still cant digest that . How come flashing a ROM in your mobile screw up the Motherboard. I appreciate if someone can throw some light on this.
Anyways i gave my bricked phone to Motorolla Service Center yesterday as Warranty is still there.I acted dump infront of them and told Godamm it!!My phone doesnt turn on all of a sudden. They took my phone and asked me to wait for 3 days till they can figure out What in the name of God has happend to my Phone. I will let you folks know if i get a replacement ....
Click to expand...
Click to collapse
Please let me know because also I've bricked my device & want to send it to nearest authorized service center.
lijuram said:
Hey folks... I tried giving my Bricked phone to nearby local mobile repair shop and even they were of no help.They were of assumption that its a motherboard issue. Seriously i still cant digest that . How come flashing a ROM in your mobile screw up the Motherboard. I appreciate if someone can throw some light on this.
Anyways i gave my bricked phone to Motorolla Service Center yesterday as Warranty is still there.I acted dump infront of them and told Godamm it!!My phone doesnt turn on all of a sudden. They took my phone and asked me to wait for 3 days till they can figure out What in the name of God has happend to my Phone. I will let you folks know if i get a replacement ....
Click to expand...
Click to collapse
I got my device from service centre n got motherboard replaced with warranty... But got updated to new firmware ss below....
Sent from my XT1068 using XDA Free mobile app
moto g2 shows qhsusb bulk plz somebody help
hello friends.. i don't have Rif JTAG box....to unbrick my moto g2
If anybody have box plz help me...& repaire my mobile bootloader
I will pay for this....plz help help help.......call me on this no.
9465351811
state punjab distt patiala teh nabha
vpo :CHHINTANWALA
exactly same problem.
lijuram said:
i flashed "BlissPop-v3.6-titan-OFFICIAL-20150629-1948" ROM to my Moto G 2014 Model and Rebooted after.Unfortunately phone doesnt turn on.Even unable to open Recovery Mode also. Can some one tell me a solution. My phone was unlocked,rooted and TWRP flashed too...
Click to expand...
Click to collapse
i have through exactly same thing. my phone was working exellently on blisspop rom and got bricked once i installed an addon.
now i want to know what u did after tht.
not to mention i dnt have warranty now.
wanna listern to a person going through same ****.
Hello frnds ....my bro have moto g 2nd gen running on lollipop with unlock bootloader rooted and twrp recovery. yesterday i flashed resurrection rom. every thing ok today i reflashed stock lollipop rom by restoring nandroid backup... Today my bro in my absence trying to flash again resurrection rom. my bro is totally noob ...he flash kernel instand of rom which is not compatible with this rom and phone get hard brick .....i has been tried this method but nothing heppened ....plzzz give me solution plzzzzzzzzz
HI FRIENDS I AM GOING TO SHARE MY UNBRICK EXPERIENCE OF LG G FLEX WITH THE HELP aftabalam8c2 ( great and genius guy)
credit for the this thread goest to aftabalam8c2
I AM ONLY SHARING WHAT HE DID WITH MY LG G FLEX WHILE UNBRICKING
PROBLEM IDENTIFICATION
NO DOWNLOAD MODE
NO RECOVERY MODE
NO FASTBOOT MODE
NO SIGN OF LIFE
PHONE DETECTED AS QHSUSB BULK
LG LOGO STUCK
STUCK IN RECOVERY
KERNEL CRASH
SECURITY BOOT ERROR WITH NO DOWNLOAD MODE
FOR ALL OF THESE PROBLEM YOU NEED TO FORCE YOUR PHONE INTO QHSUSB BULK MODE BY SHORTING TEST POINT ( what he says that special pins)
please be careful if you shorted wrong pins or anything then you can dead your emmc( i dont know which pins coz he was doing so fast)
when my phone detected as qhsusb bulk mode then he used his tool and he choose the g flex from the model and extracted some file and did something and after 2 minutes he packed the device and guess what??
download mode was fixed
I NEVER SEEN SUCH GENIUS GUY HE KNOW WHAT NEED TO DO
WHEN I ASKED HIM THAT HOW DO YOU FIND THAT SPECIAL PINS THEN HE REPLIED I M AN ELECTRONICS ENGINEER AND I KNOW WHAT TO SHORT AND WHAT NOT ( HE USED MULTIMETER TO FIND A SPECIFIC RESISTANCE PIN)
THANKS SO MUCH GENIUS
I AM LUCKY THAT HE IS FROM MY STATE DELHI ( INDIA)
I HOPE THIS GIVES YOU SOME HINT
I SHARED WHAT I UNDERSTOOD FROM HIS METHOD
THANKS
Same Problem here
hacklockx said:
HI FRIENDS I AM GOING TO SHARE MY UNBRICK EXPERIENCE OF LG G FLEX WITH THE HELP aftabalam8c2 ( great and genius guy)
credit for the this thread goest to aftabalam8c2
I AM ONLY SHARING WHAT HE DID WITH MY LG G FLEX WHILE UNBRICKING
PROBLEM IDENTIFICATION
NO DOWNLOAD MODE
NO RECOVERY MODE
NO FASTBOOT MODE
NO SIGN OF LIFE
PHONE DETECTED AS QHSUSB BULK
LG LOGO STUCK
STUCK IN RECOVERY
KERNEL CRASH
SECURITY BOOT ERROR WITH NO DOWNLOAD MODE
FOR ALL OF THESE PROBLEM YOU NEED TO FORCE YOUR PHONE INTO QHSUSB BULK MODE BY SHORTING TEST POINT ( what he says that special pins)
please be careful if you shorted wrong pins or anything then you can dead your emmc( i dont know which pins coz he was doing so fast)
when my phone detected as qhsusb bulk mode then he used his tool and he choose the g flex from the model and extracted some file and did something and after 2 minutes he packed the device and guess what??
download mode was fixed
I NEVER SEEN SUCH GENIUS GUY HE KNOW WHAT NEED TO DO
WHEN I ASKED HIM THAT HOW DO YOU FIND THAT SPECIAL PINS THEN HE REPLIED I M AN ELECTRONICS ENGINEER AND I KNOW WHAT TO SHORT AND WHAT NOT ( HE USED MULTIMETER TO FIND A SPECIFIC RESISTANCE PIN)
THANKS SO MUCH GENIUS
I AM LUCKY THAT HE IS FROM MY STATE DELHI ( INDIA)
I HOPE THIS GIVES YOU SOME HINT
I SHARED WHAT I UNDERSTOOD FROM HIS METHOD
THANKS
Click to expand...
Click to collapse
I'm having the same problem sir? How can this be fixed its dead since last two weeks. Please help me.
hello friend hacklockx; Help me relive my g3 d855 please
Good afternoon friend hacklockx; I need your help please
Hey saw your post that says: "Unbrick lg g flex no download mode, no recovery, qhsusb bulk, no sign of life"" and so I'm writing friend
- The PC recognizes me as:
Qualcomm HS-USB QDLoader 9008; So far so good right?
- No Download Mode recognized
- No Recovery Mode recognized
- When I turn on the phone, get the logo then off it goes about three letters at the top left, then turn on a red, blue lights and stays there ... ..
now that I do; can you send a small video how to proceed or relive step by step, to not make any mistake.
*And finally revive my phone LG G3 d855p please, please ... ..
- Can be with pliers?
If you help me regain my g3, I promise I'll do a tutorial in the form of gratitude to you, And haci many partners to help with this problem .....!
... ..
You have mail gmail? (Houngts) to discuss best
I'll be waiting for your prompt response
postscript: help please, please
This is not the correct forum @themusic1510 a testpoint of flex wouldnt work on the G3 there is a tutorial in the G2 forum to unbrick when in qualcomm usb device is detected. You have to download certain files and fastboot flash your device to unbrick it.
Good luck!
Shorting pins? In the USB port? Elaborate more please?
mattwheat said:
Shorting pins? In the USB port? Elaborate more please?
Click to expand...
Click to collapse
check this out @mattwheat link
Alex_XV6700 said:
check this out @mattwheat link
Click to expand...
Click to collapse
Thanks
hello
Lg g flex device does not give mode
Separates and restores operating
no mode
turn on turn off turn on turn off just
help me
lg g flex test point
can some one send me image of lg gflex test point.
Hey Guys,
I've got an LG D959 and I've got the exact same problem NOTHING is working it just gets stuck and loads at TMobile 4G LTE screen until the battery is finished. I can't access download mode, no compute recognizes my phone and it goes straight to charging. @aftabalam8c2 do you think you can guide me? I've been stressing ALOT about this man it would mean a TON! Thank you bro.
hacklockx said:
hi friends i am going to share my unbrick experience of lg g flex with the help aftabalam8c2 ( great and genius guy)
credit for the this thread goest to aftabalam8c2
i am only sharing what he did with my lg g flex while unbricking
problem identification
no download mode
no recovery mode
no fastboot mode
no sign of life
phone detected as qhsusb bulk
lg logo stuck
stuck in recovery
kernel crash
security boot error with no download mode
for all of these problem you need to force your phone into qhsusb bulk mode by shorting test point ( what he says that special pins)
please be careful if you shorted wrong pins or anything then you can dead your emmc( i dont know which pins coz he was doing so fast)
when my phone detected as qhsusb bulk mode then he used his tool and he choose the g flex from the model and extracted some file and did something and after 2 minutes he packed the device and guess what??
download mode was fixed
i never seen such genius guy he know what need to do
when i asked him that how do you find that special pins then he replied i m an electronics engineer and i know what to short and what not ( he used multimeter to find a specific resistance pin)
thanks so much genius
i am lucky that he is from my state delhi ( india)
i hope this gives you some hint
i shared what i understood from his method
thanks
Click to expand...
Click to collapse
i have a same problem, some 1 helpme please
Same problem here.Tried to force in qusb 9008 by pin short and now its dead, no led blinking.So don't try unless you know the right pin or pins.
Sent from my LG-D855 using XDA Free mobile app
xdamicroboy said:
Same problem here.Tried to force in qusb 9008 by pin short and now its dead, no led blinking.So don't try unless you know the right pin or pins.
Sent from my LG-D855 using XDA Free mobile app
Click to expand...
Click to collapse
Hi! I got into 959 by mistake. Basically phone is working, but it does not accept my sim card any more. Could I beg you to teach me what places did you short?
Hello this is my first posting and I hope it helps me
I 'm from Mexico and I have the following problem , when installing an unofficial rom my phone went off and not start now my computer recognizes it for only a few seconds but then disconnected and do not have access to recovery and emergency mode , virtually became in a brick,
I tried to flash lg PROGRAMS tool LGMobile Support Tool 2014 that are official brand but none have worked for me , please if anyone has the solution to this problem let me know I would appreciate it very much
please help