[Q]What should I do? (Bricked Phone) - Samsung Galaxy Mini

Hello, this is my first post, but no one cares. Right?
I have a little story... Today I tried to Upgrade from CM 10.1 to CM 10.2 but I had a little problem. Because I wanted to have a fresh instalation I first tried to flash with ODIN 3.0.4 official 2.3.6. In the middle of instalation... I had a power outage for 5 seconds. Now my problem is:
1. It can't enter Recovery;
2. It can't enter Download Mode;
3. It can't boot System.
When i plug the usb cable, it shows me this message: "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. ", but that's a little strange because I don't even have Kies installed on PC. This is the only scree I can see.
I don't know how, but somehow I entered Download Mode for 5-10 seconds, but my PC doesn't recognize my phone. After that the phone just shuted down.
I already browse all topics about soft brick, but nothing helped me...
Before take my phone to a service, what are my other choices?

DanuTzCarbon said:
Hello, this is my first post, but no one cares. Right?
I have a little story... Today I tried to Upgrade from CM 10.1 to CM 10.2 but I had a little problem. Because I wanted to have a fresh instalation I first tried to flash with ODIN 3.0.4 official 2.3.6. In the middle of instalation... I had a power outage for 5 seconds. Now my problem is:
1. It can't enter Recovery;
2. It can't enter Download Mode;
3. It can't boot System.
When i plug the usb cable, it shows me this message: "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. ", but that's a little strange because I don't even have Kies installed on PC. This is the only scree I can see.
I don't know how, but somehow I entered Download Mode for 5-10 seconds, but my PC doesn't recognize my phone. After that the phone just shuted down.
I already browse all topics about soft brick, but nothing helped me...
Before take my phone to a service, what are my other choices?
Click to expand...
Click to collapse
Sorry my friend only samsung can help you!!!
Sent from my GT-S5570 using xda premium

uninstall your kies. then install samsung usb driver.
then odin your phone.

dzeig said:
uninstall your kies. then install samsung usb driver.
then odin your phone.
Click to expand...
Click to collapse
I can't enter Download Mode and I haven't KIES installed.

Since you had a power outbreak during Odin flashing, it might not fully flash the bootloader (boot.img file), or the fat.bin file, both of them are essential for proper phone operation.
Install Kies, and try the recovery mode in it, see if it works.
Also, try to charge your battery, maybe this will help somehow.
If nothing works, service is your only option, as you cannot manually repair a partially flashed boot.img or fat.bin.

boot.img is not bootloader,

Boot.img is kernel
Tapnięte z mojego mini 2

MrMateczko said:
Since you had a power outbreak during Odin flashing, it might not fully flash the bootloader (boot.img file), or the fat.bin file, both of them are essential for proper phone operation.
Install Kies, and try the recovery mode in it, see if it works.
Also, try to charge your battery, maybe this will help somehow.
If nothing works, service is your only option, as you cannot manually repair a partially flashed boot.img or fat.bin.
Click to expand...
Click to collapse
Well, I installed Kies.
I can't use "Emergency firmware recovery" because my PC doesn't recognize my phone.
I can't use "Firmware Upgrade and Initialisation". When I enter the details about my phone I get "'GT-S6500D' does not support initializing.".
I don't think I have other option in Kies...

Another problem:
My phone is absolutely unresponsive.
Maybe because of battery.
I can't charge it. I have a friend with S6500D...
I will try with he's battery.
Maybe I could try some tricks to enter in Download Mode. (God, please help me!!)

Instal drivers and go to download mode !
Tapnięte z mojego mini 2

hheelloo said:
Instal drivers and go to download mode !
Tapnięte z mojego mini 2
Click to expand...
Click to collapse
I have drivers. Isn't that the problem. And I said I can't enter Download Mode.

Sorry but your phone is hard bricked so you can't fix your phone yourself.You have to send it to samsung to fix it.The hard brick was caused by failed bootloader update.But if you have power surges i recommend you to flash your phone from a laptop.

darkshadow1997 said:
Sorry but your phone is hard bricked so you can't fix your phone yourself.You have to send it to samsung to fix it.The hard brick was caused by failed bootloader update.But if you have power surges i recommend you to flash your phone from a laptop or flash stock rom with bootloader removed link:http://forum.xda-developers.com/showthread.php?t=1551586
Click to expand...
Click to collapse
Thanks for the advice.

Please ignore the link to stock firmware without bootloader because i did not know your phone was galaxy mini 2 because sometimes mini 2 questions are posted in mini 1.And i have both mini and mini 2.

If boot.img is not the bootloader (it's the kernel, I'm sorry for telling you wrong before), then why the Download Mode does not work?

darkshadow1997 said:
Please ignore the link to stock firmware without bootloader because i did not know your phone was galaxy mini 2 because sometimes mini 2 questions are posted in mini 1.And i have both mini and mini 2.
Click to expand...
Click to collapse
It doesn't matter... I saw it was for Mini... Anyway download mode still not working so don't worry.
Thanks for the idea of stock firmwares without bootloader... maybe i could edit stock firmwares for my phone.

You can edit stock rom without the risk of hardbrick.just upack your stock rom then delete bootloader then download a software to create tar do not use tar editor because just deleting the bootloader doesn't mean odin will load it maybe because of md5.So did you send your phone to samsung.

darkshadow1997 said:
You can edit stock rom without the risk of hardbrick.just upack your stock rom then delete bootloader then download a software to create tar do not use tar editor because just deleting the bootloader doesn't mean odin will load it maybe because of md5.So did you send your phone to samsung.
Click to expand...
Click to collapse
Well... my brother know a guy who know another guy. This guy have a service or something like that. I sent the phone to him. Maybe he could do something. If not... I will try to find the famous Usb Jig for my model of mini. I found for GT-S5570 but still searching for GT-S6500D

Fixed
Well... I sent my phone to a service but there they could only fix download mode. LOL. They tried to install firmware update, but the phone was stuck in bootloop. From there, I fixed by myself.
I will ask them how did they fix it.

Related

[Q] Bricked Galaxy Mini

Hi, I live in Egypt for a while and I bought last month a Mini. Everything was going just fine, I was using Odin many times to try new roms, and CWM Recovery to give a try to custom roms, without problems. Yesterday morning I flashed my device with the 2.3.6 rom that I found on this forum, apparently made for Latin America. Since that moment, my mobile is on boot loop, i can't do anything, I only can access downloading mode, I tried to reflash gingerbread 2.3.4, and2.3.5, it goes well, Odin gives me the PASS message, but still my mobile is forever rebooting at Samsung logo. I can't access recovery.
What to do? Is it bricked and do I have to send it to Samsung Center or is there hope to fix it by myself?
Thank you for any help...
Yohan
u cant even enter recovery?if u can,just wipe cache and data..
Sent from public phone using 10cents.
ybregeon said:
Hi, I live in Egypt for a while and I bought last month a Mini. Everything was going just fine, I was using Odin many times to try new roms, and CWM Recovery to give a try to custom roms, without problems. Yesterday morning I flashed my device with the 2.3.6 rom that I found on this forum, apparently made for Latin America. Since that moment, my mobile is on boot loop, i can't do anything, I only can access downloading mode, I tried to reflash gingerbread 2.3.4, and2.3.5, it goes well, Odin gives me the PASS message, but still my mobile is forever rebooting at Samsung logo. I can't access recovery.
What to do? Is it bricked and do I have to send it to Samsung Center or is there hope to fix it by myself?
Thank you for any help...
Yohan
Click to expand...
Click to collapse
Just remove the battery and stop your phone.
Put the battery in again.
Go to recovery mode by pressing Home + Power button at the same time.
In the reocevey choose wipe data/factory reset option.
Reboot your device after you are done.
You mobile will boot up fine.
Thank you for your answers but I wanna insists on a point: I can't access recovery at all, the phone show me the samsung logo for about half a second then restarts, and is looping in this state. No recovery, only downloading mode and RAMDUMP Mode (ARM9 mode) & Emergency Dload Mode (ARM9 Mode). Nothing else is avalaible.
Helppp
ybregeon said:
Hi, I live in Egypt for a while and I bought last month a Mini. Everything was going just fine, I was using Odin many times to try new roms, and CWM Recovery to give a try to custom roms, without problems. Yesterday morning I flashed my device with the 2.3.6 rom that I found on this forum, apparently made for Latin America. Since that moment, my mobile is on boot loop, i can't do anything, I only can access downloading mode, I tried to reflash gingerbread 2.3.4, and2.3.5, it goes well, Odin gives me the PASS message, but still my mobile is forever rebooting at Samsung logo. I can't access recovery.
What to do? Is it bricked and do I have to send it to Samsung Center or is there hope to fix it by myself?
Thank you for any help...
Yohan
Click to expand...
Click to collapse
hey man i've already had that problem..coz i flash 2.3.6 and encountered same problem but i manage to fix it.. you need to enter recovery mode... Note: you need to hold the home & power button and wait for the samsung logo to flash TWICE (2X),when the 2nd logo flash, just realease the buttons and your on recovery mode.just wipe/ data reset.. right now im using Ginger bread 2.3.6JKVT and its rooted also.
No, I can't access recovery sorry.
Connect your phone to your laptop.
Use ADB
Type this :
adb shell reboot recovery
That will take you to download mode,then you can flash rom again. It would be easier if you have a CWM installed
Sent from my GT-I5500-MADTEAM using Tapatalk
Shall I use Downloading mode to do this?
ybregeon said:
Shall I use Downloading mode to do this?
Click to expand...
Click to collapse
If you can't access recovery either falsh CWM recovery or Flash another firmware from Download mode. If you want to flash CWM recovery just follow the link below for Galaxy Mini and search CWM recovery.
I tried many times, since i have this problem, to flash and reflash, official roms, CWR, but nothing works, setup goes fine according to Odin, but still have the problem on my phone, still only downloading mode works, and still a flashing screen, just during the samsung logo.
No one can help me with my mobile???
ybregeon said:
No, I can't access recovery sorry.
Click to expand...
Click to collapse
did you wait for the samsumg logo to flash tiwce while holding the combo key? you see when im installing firmware using odin my laptop turn off coz i dont have a battery i thought my mini was brick because the process was not finish,so what happen i tried to acces recovery mode its only shows a computer icon & phone icon. but i manage to fix the problem i go to download mode and flash again another firmware. and everything goes fine..so how come that you cant access recorvery...i would suggest that you flash a firmware with 4 parts not a single package.
just try this www*mediafire*com/?br3r8fod5g3vud4 flash this firmware with Odin this will surely work please replace * with . brace my post count is not enough to post outside link
As long as you can enter download mode... you are safe. If you can... just flash it back with Odin.
Follow this step
http://forum.xda-developers.com/showthread.php?t=1107331
Thanks but no
dhlalit11 said:
just try this www*mediafire*com/?br3r8fod5g3vud4 flash this firmware with Odin this will surely work please replace * with . brace my post count is not enough to post outside link
Click to expand...
Click to collapse
Thank you for the link, i tried but still have the same problem. Could this be an EEPROM problem?
ybregeon said:
Thank you for the link, i tried but still have the same problem. Could this be an EEPROM problem?
Click to expand...
Click to collapse
Try booting up without micro sd nor sim card.
Sent from my neighbour’s android phone
i had a same problem too.
my phone cannot power on, and ONLY download mode only working.
i flashed it for so many time too, and it doesn't seem to fix the problem.
so any fix on this ?
To ybregeon and Tre3,
I had the exact same issue, only Download Mode and RAM Dump, but could not enter recovery mode. Tried flashing many ROMs, oneclick unbrick, Heimdall recovery etc. but still no solutions available, I tried many-many tricks with no luck. So I went to Samsung Service Center, and it turned out that the problem is in the mainboard. It took me one night before Samsung replaced the mainboard from my phone and it's been working well since. All free of charge.
I hope your warranty is still valid. Good luck.
Sent from my GT-S5570 using XDA App
distan7 said:
To ybregeon and Tre3,
I had the exact same issue, only Download Mode and RAM Dump, but could not enter recovery mode. Tried flashing many ROMs, oneclick unbrick, Heimdall recovery etc. but still no solutions available, I tried many-many tricks with no luck. So I went to Samsung Service Center, and it turned out that the problem is in the mainboard. It took me one night before Samsung replaced the mainboard from my phone and it's been working well since. All free of charge.
I hope your warranty is still valid. Good luck.
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
reflash the XXKPI/XXKPK 2.3.4 then flash the cmw, xxkpi and xxkpk is the safest stock gb rom to install
Flash odin and go to recovery mode and wipe.
It should work.

I can only enter Recovery mode

Hi,
I installed a bootloader with Odin And after that I needed to Install a GBOOT with Odin but I can't enter dowload mode I only can enter Recovery mode. What do I need to do ?
I used this http://forum.xda-developers.com/showthread.php?t=1117990
What phone do you have?
What recovery version are you running?
How do you get into recovery?
A tad more info would be useful please.
9. Whatever I flash, I end up in Recovery! What should I do?
Flash stock Vibrant bootloaders, then ODIN to stock JFD. You should be good to go here onwards... I only had this issue when I tried changing bootloaders over MIUI/CM7. Couldn't replicate on Samsung ROMs... (AS QUOTED ON THE LINK PAGE)
Thank you for your responds
The recovery mode I run is CWM v 5.0.2.7 .
The thing is Odin can't recognize my phone because I can't enter Downloading mode so I can't flash that.
Hope you can help me further
if you got any rom's stored on your sdcard you could try to flash that and then try to enter download mode, otherwise you could go to "mounts and storage" and mount usb storage there and move over an rom to flash.
Try to flash phone via cwm. Now we have jvz deodexed version on forum. Maybe after it will be ob.
Wysłano z GT-I9000 z użyciem Tapatalk
I've tried to flash a rom from my SD card.
@Emek can you explain it more clearly. I don't understand it.
Grtz William !
There is a rom on here you can flash using CWM. On the forum is a JVZ that you can flash without using ODIn, slap that on your sd card, goto recovery and install from sd and hopefully that should fix it
Sorry of being such a noob. What's a JVZ and which one do I need to flash.
Grtz William
I flashed this one Click
And It still doesn't work...
edit: Tried this one as well Click
It still doesn't work. I hope my phone isn't Bricked. Is he ?
They wont work as you need the correct gingerbread bootloaders installed first.
You ned to make or buy a jig then you can get the phone to access download mode again, and then using ODIN 1.83 reflash everything inlcuding the bootloader.
Jig instructions http://forum.xda-developers.com/showthread.php?t=819551
Failing that, see if you can buy a jig from ebay
Ok thank you. I ordered yesterday a JIG from ebay.
What do I need to do then. What do I need to flash exactly ... I don't want to screw it up another time. I liked the MIUI rom but he didn't recognize the external SD so that's the reason why I flashed other bootloaders.
So I would like to have MIUI with working SD card.
If the SD card doesn't work I won't to flash the original Android.
Grtz William
I would download and flash this for starters, it contains a bootloader as well make sure you click the bootloader section in ODIN.
http://forum.xda-developers.com/showthread.php?t=1380402
Then you can flash a custom rom afterwards, but dont change the bootloader once it works!
buttwad said:
I would download and flash this for starters, it contains a bootloader as well make sure you click the bootloader section in ODIN.
http://forum.xda-developers.com/showthread.php?t=1380402
Then you can flash a custom rom afterwards, but dont change the bootloader once it works!
Click to expand...
Click to collapse
I tried to flash it but Odin said that it failed. But the ****ing thing now is that when I connect my phone to the usb my computer doesn't recognize it and odin doesn't recognize it at well. Please help ! I just want that my phone works !
Anybody please...
Once I was playing with downloading and recovering mode I got into recovery mode then I was unable to get back to normal phone or downloading screen
what I did I pull out battery put out my sim.
I pressed volume up and down and home button togather and then pressed on button it worked out for me you should try that might work for you may be or maybe not.
shez555 said:
Once I was playing with downloading and recovering mode I got into recovery mode then I was unable to get back to normal phone or downloading screen
what I did I pull out battery put out my sim.
I pressed volume up and down and home button togather and then pressed on button it worked out for me you should try that might work for you may be or maybe not.
Click to expand...
Click to collapse
I bought a JIG so I can get into download mode right now so then I flashed the ROM that Buttwad proposed. But ODIN said the proces of flashing failed and no when I connect my phone to my pc my pc even don't recognize my phone so I can't put anything on my phone. What do I need to do. I am desperate.
u can acces the phone sd in recovery..
Am I blind or have you actually FLASHED a Vibrant bootloader over Galaxy S??
Seems like you have issues with key combinations. Try using the Volume down with power button and see if it could get you to the download mode.
Also, if your device is being detected by the phone, use "adb reboot download" to reboot the phone into download mode.
Here is the situation: I had the MIUI rom on my phone but my phone didn't find my external SD. So i searched a bit on the internet and I found a guy who had the same problem and he said that I needed to flash the Vibrant bootloaders so I did that. But then everytime I started up my phone I came in Recovery mode. I couldn't even acces downoading mode anymore. So first I tried to flash two other roms(This one And this onebut the problem stayed the same. So I bought a JIG and then I tried to put this bootloaderon my phone but Odin said ERROR after a while. So then I tried to flash this one.
But now I can't even enter recovery mode. When I start up my phone I see a pictogram with my phone and the pc with the sign that I can't connect them.
And my computer also don't find my phone anymore so I can't flash anything anymore.
Please Help !
I will give 8 euros to the person who can tell me step by step(easy) what I need to do to make my phone working.
how to install miui?

i can't go into recovery or download mode after flashing

Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
dana25 said:
After installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
RubenStauttener said:
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
would you provide me with that or tell me how?
dana25 said:
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Viprdxd said:
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Click to expand...
Click to collapse
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
bro i think u most probably bricked ur phone but dont worry try opening download mode. then using the odin u install ur stock rom. Then u can access ur r mode. but try to read the entire procedure..of flashing the rom.
dana25 said:
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
Click to expand...
Click to collapse
So . . . last thing to rescue your phone is buy on e-bay or in other place JIG if it isn't help you then try in phone service and say you tried install new ROM with Kies and your phone is brick (maybe it'll work).
Say to Service Centre Representatives that you kept your at charging last night
And when you woke up
It was not booting up
Pretend as if you dunno anything about root or ROM
They fixed my bricked phone
I am not sure if I am breaking any forum rule by telling this
Hey bro sorry for the late reply also, please before you do anything else try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Please keep us updated so we can help you if you need it.
Sent from my Nexus 7 using xda app-developers app
Why will it be hardbricked if the custom roms are based on s5830i stock roms?
But it is probable that we did I not flash the rom properly as per procedure..so is there a chance that it be bricked? Else the rom may have some problem... just telling the probability
Sent from my GT-S5830i using xda premium
Help me .
help me on fixing my ace s5830i , my problem is after flashing it with RazoDroiD my phone seems to be ok , i decided to change my firmware by a stockrom using Odin mode or the Volume Up+Down+On off it stays on blank screen . Can you help me on fixing this ? and what do you call this problem .
Try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Follow this and don't worry about black screen just make sure Odin detects your PC com port.
Sent from my Nexus 7 using xda app-developers app

[Q] s3 mini bricked :(

Hi everybody, I have a problem. _.
I flashed on my s3mini cwm touch.
I wanted to start my phone but the screen is black, it does not indicate charging, my PC recognizes the phone is not the same as Odin.
In the recovery mode I can not, and the download does not mode.
So what can I do? :crying:
Sorry for my bad english , i´m from Germany
Lorick said:
Hi everybody, I have a problem. _.
I flashed on my s3mini cwm touch.
I wanted to start my phone but the screen is black, it does not indicate charging, my PC recognizes the phone is not the same as Odin.
In the recovery mode I can not, and the download does not mode.
So what can I do? :crying:
Sorry for my bad english , i´m from Germany
Click to expand...
Click to collapse
Put un download mode and reflash
ftheriau01 said:
Put un download mode and reflash
Click to expand...
Click to collapse
The 3 button combo does not work because the phone does not start.
That's why I can not get into the download mode
Jit
Search s 3 mini adb recovery.
Sent from my GT-I8190 using xda app-developers app
Which method did you use to flash it?
Is your battery loaded?
First you need to check if your battery is charged. If you have a friend with s3 mini try to charge your battery in his phone.
If the battery is charged, the phone should boot. The recovery doesn't affect the boot partition. If the phone doesn't boot you probably wrote something not ok in the boot partition. In this case only a JTAG can fix your phone.
When you flash the recovery from Odin the file you want to flash should be in the PDA box. If you put the recovery in the bootloader box, the recovery file will overwrite the bootloader and your phone won't boot any more. Odin doesn't test if the file is ok for that partition. This is called a hardbrick.
If you didn't touch the bootloader partition, the phone should boot and you should be able to get it into download mode at least. I don't think there is anything you can put in the PDA box to make your phone not boot.
Try flash the stock rom again, use odin it should work even if you're phone is off, remember you had to previously installed samsung kies on your pc/laptop so you're computer recognized your phone (that's simply basic)... I've seen the tys0n dude knows a lot too he's helped other guys good luck pal.

[Q] [q] galaxy ace bricked flashing cm7! Help please!

Hello, I was trying to root and install the CM7 on my Samsung Galaxy Ace GT-S5830B. The root and the cwm installation processes worked with no problems, but when I installed the CM7 it just turned off and won't turn on again.
I can't flash a stock ROM via Odin cuz the pc won't recognize the device. It won't turn on in normal mode, downloading mode nor bootloader.
What can I do to solve this issue, please?
Thank you!
archangellz said:
Hello, I was trying to root and install the CM7 on my Samsung Galaxy Ace GT-S5830B. The root and the cwm installation processes worked with no problems, but when I installed the CM7 it just turned off and won't turn on again.
I can't flash a stock ROM via Odin cuz the pc won't recognize the device. It won't turn on in normal mode, downloading mode nor bootloader.
What can I do to solve this issue, please?
Thank you!
Click to expand...
Click to collapse
Which ROM You have flashed? If You can´t go to Recovery or Download mode, try USB JIG, if not work with JIG, I am sorry Your phone is bricked.
If Your phone can´t nothing try put out battery, connect Your Ace with usb cable (without battery), open odin, hold 3 buttons for download mode (vol.down+home+power) and WITH holding buttons put back baterry. If in Odin You can see yelow oblong with COM, You can now try flash new stock rom.
Paul Koty said:
Which ROM You have flashed? If You can´t go to Recovery or Download mode, try USB JIG, if not work with JIG, I am sorry Your phone is bricked.
If Your phone can´t nothing try put out battery, connect Your Ace with usb cable (without battery), open odin, hold 3 buttons for download mode (vol.down+home+power) and WITH holding buttons put back baterry. If in Odin You can see yelow oblong with COM, You can now try flash new stock rom.
Click to expand...
Click to collapse
I tried installing Cyanogenmod 7.2. And err, is there any other way of trying to restore the phone instead of the USB JIG, cuz I don't have any. :/
I've already tried to go on the download mode by the steps you just said (power button+vol up./down + home), but the phone seems to be dead, it won't turn on in normal mode, download mode nor recovery. As the phone won't start in the download mode, i'm not able to flash anything via ODIN.
Is there anything else I could try? What if I try to flash STOCK ROM via ADB to SD CARD using ANOTHER CELLPHONE?
Thanks for helping.
Ah, another important info is that I think the phone "died" with the USB Debugging deactivated, so I think that's why the ADB can't recognize the device, right?
archangellz said:
Hello, I was trying to root and install the CM7 on my Samsung Galaxy Ace GT-S5830B. The root and the cwm installation processes worked with no problems, but when I installed the CM7 it just turned off and won't turn on again.
I can't flash a stock ROM via Odin cuz the pc won't recognize the device. It won't turn on in normal mode, downloading mode nor bootloader.
What can I do to solve this issue, please?
Thank you!
Click to expand...
Click to collapse
Try, to downnload the drivers of the SGA, in the samnsung page, if it works, use a stock rom that don´t be a one package. Sorry for my bad english.
Wrong section!
Use Q&A Thread the next time
Can you boot into CWM?
If your device is still valid warranty send it
for service

Categories

Resources