Database Develop

Can not flash CWM :(

Hi I'm trying to install miui for my sister in law on her Galaxy S but I can't seem to install CWM.
I've downloaded rom manager from the market clicked on flash recovery (fist option) then from the list chose samsung galaxy s. The next I clicked on reboot to recovery but when it boots into it, it says at the top Android system recovery (3e)
What am I doing wrong???? :s
PS I don't have a memory card inside my phone trying to install via the internal sd storage. The also I don't have access to my pc so need to do it off my phone. Please any help appreciated thank you.
Sent from my GT-I9100

When you boot into recovery press the buttons a couple of times. Ie, 3button combo to boot, release all the buttons and press the 3buttons again. I have had the same problems on 3sgs's and this seemed to work on them.

No luck
Any one else have any ideas. Please any help is appreciated.
Sent from my GT-I9100

Buy a jig usb..It put your bricked phone on download mode in only 2 seconds!

Nezys said:
Buy a jig usb..It put your bricked phone on download mode in only 2 seconds!
Click to expand...
Click to collapse
I don't think he's mentioned not getting into download mode.... Confused by your reply.
Sent from my GT-I9000 using xda premium

I have clockworkmod recovery installed and when i click on reboot to recovery or use the 3 button configuration it only boots into the android system recovery.
I can not for the life of me get the Cwm recovery to boot up.
Is there a kernel I can flash with rom manager to get cwm installed
Sent from my GT-I9100

It's definitely rooted? What rom is it currently on?
Sent from my GT-I9000 using xda premium

Darkys rom. Plus i have titanium backup installed and backed up my apps. Superuser is working perfectly.
I want to install miui the official rom.
Anyway I can without having to use a pc??
Sent from my GT-I9100

If it's on Darky's rom, it should have cwm already! Not sure if you can do it from your phone now mate.
Once you've got the cwm sorted (hopefully it's a gingerbread rom) you need to format system, data and cache, then flash Miui.
Sent from my GT-I9000 using xda premium

Ahhh.
Flash darky RE via Odin. But if you are running darky kernel you should have cwm. Uninstall cwm app and try again.

ichigo786 said:
Hi I'm trying to install miui for my sister in law on her Galaxy S but I can't seem to install CWM.
I've downloaded rom manager from the market clicked on flash recovery (fist option) then from the list chose samsung galaxy s. The next I clicked on reboot to recovery but when it boots into it, it says at the top Android system recovery (3e)
What am I doing wrong???? :s
PS I don't have a memory card inside my phone trying to install via the internal sd storage. The also I don't have access to my pc so need to do it off my phone. Please any help appreciated thank you.
Sent from my GT-I9100
Click to expand...
Click to collapse
If i understand well, you can't use odin because you don't have PC,right? Well:make sure that your phone is rooted. Go to market and get that application : "sgs kernel flashar " the one by neldar.
Then download a kernel for your firmware, and make sure you download a tar file or obtain a zimage file. Flash it with the application mentioned, you don't need any cwm. After that you flash the new kernel you should have a cwm installed.
If i understand wrong I'm sorry.
Inviato dal mio GT-I9000 usando Tapatalk

HELP format system

Hi all
Unfortunatly i've done a format of the system of my phone "mount and storage-->mount system-->format system" and after that i rebooted the phone.
Now it doesn't restart.
The CWM works good and DOWNLOAD MODE too but the problem is that the computer doesn't recognise the phone when i connect it at the USB.
Would somebody suggest me how can i reanimate my SGS pleaseee...

Anarhia said:
Hi all
Unfortunatly i've done a format of the system of my phone "mount and storage-->mount system-->format system" and after that i rebooted the phone.
Now it doesn't restart.
The CWM works good and DOWNLOAD MODE too but the problem is that the computer doesn't recognise the phone when i connect it at the USB.
Would somebody suggest me how can i reanimate my SGS pleaseee...
Click to expand...
Click to collapse
Have you tried to do a full wipe , reboot recovery , flash the rom ?

Anarhia said:
Hi all
Unfortunatly i've done a format of the system of my phone "mount and storage-->mount system-->format system" and after that i rebooted the phone.
Now it doesn't restart.
The CWM works good and DOWNLOAD MODE too but the problem is that the computer doesn't recognise the phone when i connect it at the USB.
Would somebody suggest me how can i reanimate my SGS pleaseee...
Click to expand...
Click to collapse
Do 3 wipes from CWM and flash the ROM again. It should be alright after that.....
Sent from my GT-I9000 using xda app-developers app

rajamahbub said:
Do 3 wipes from CWM and flash the ROM again. It should be alright after that.....
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Also, if you backed up with CWM you should be able to just restore it...

Download any Ramad's ROM for CWM, put it in SD card and flash via download mode.

I made a stupid Miskate

hello everyone
here is the deal
i'vetried to flash ths AC!D Audio engine on my phone and for some reason it didnt work out
no the phone is stuck in the booting screen
the thing is i dont have any rom copied to the SD Card and The STUPID mistake is that i didnt back it up first
ive tried to wipe (factory reset/cache/dalvik cache) with no luck
now to add oil to the fire recently ive formatted my laptop and im not sure that all the phones driver are installed, so i cant be sure if using odin will work
what should i do
P.S i can go to CWR menu but like i said no rom is copied
currently im using CM9.1 stable with CWM- based recovery v6.0.1.2
HELP PLEASE !!!!:crying:

Downloadaholik said:
P.S i can go to CWR menu but like i said no rom is copied
currently im using CM9.1 stable with CWM- based recovery v6.0.1.2
HELP PLEASE !!!!:crying:
Click to expand...
Click to collapse
Just download the required Files in your Laptop, use CWM> mounts and storage> copy files to your SD card and flash

Install kies and adb. That will ensure that you have all the drivers. Just make sure that kies is not running when you want yo use odin.
Sent from my GT-I9000 using Tapatalk 2

Samsung Drivers...
Downloadaholik said:
hello everyone
here is the deal
i'vetried to flash ths AC!D Audio engine on my phone and for some reason it didnt work out
no the phone is stuck in the booting screen
the thing is i dont have any rom copied to the SD Card and The STUPID mistake is that i didnt back it up first
ive tried to wipe (factory reset/cache/dalvik cache) with no luck
now to add oil to the fire recently ive formatted my laptop and im not sure that all the phones driver are installed, so i cant be sure if using odin will work
what should i do
P.S i can go to CWR menu but like i said no rom is copied
currently im using CM9.1 stable with CWM- based recovery v6.0.1.2
HELP PLEASE !!!!:crying:
Click to expand...
Click to collapse
I used this link originally to root my phone and it has links for windows drivers for samsung phones.
http://www.theandroidsoul.com/xxjw4-root-and-clockworkmod-recovery-for-galaxy-s/
I also think there are drivers in some of the Odin packages you can download.

xsenman said:
Just download the required Files in your Laptop, use CWM> mounts and storage> copy files to your SD card and flash
Click to expand...
Click to collapse
Dude You Are a Genius
it worked thank you soo much

Try this
http://forum.xda-developers.com/showthread.php?t=1637966

[Q] how to restore device using NVflash.Help!!!!!

I was using this rom http://forum.xda-developers.com/showthread.php?t=1959545
then i tried to go to recovery and install CM10 Nightly but i was not able to enter recovery mode so i install Rom Manager and Flash CWM 6 and tried to flash cm10 but recovery stopped whwn i tried to choose zip from external sd card. so i remove the battery and restart the device but it is saying Encryption Unsuccessful and i am also not able to enter revery mode.
i also tried this http://forum.xda-developers.com/showthread.php?t=1229407&highlight=smartflash
but when i tried to flash.bat it says usb not found
Please Help me
I solved It
I Installed Stock Clean ROM from Homero using NVFlash and it worked.

jagwant said:
I was using this rom http://forum.xda-developers.com/showthread.php?t=1959545
then i tried to go to recovery and install CM10 Nightly but i was not able to enter recovery mode so i install Rom Manager and Flash CWM 6 and tried to flash cm10 but recovery stopped whwn i tried to choose zip from external sd card. so i remove the battery and restart the device but it is saying Encryption Unsuccessful and i am also not able to enter revery mode.
i also tried this http://forum.xda-developers.com/showthread.php?t=1229407&highlight=smartflash
but when i tried to flash.bat it says usb not found
Please Help me
Click to expand...
Click to collapse
CWM recovery 6 does not like O2X and custom ROMs-best is the CWM 5series for me.....but its performance varies according to a few devices and ROMs.
try to pull out battery, wait for sometime and then try it again.USB Cable might also be a spoilsport....check that as well.
As you have tried the Rusty's thread /method(strange it did not work), try the "Unbrick with Stock Clean ROM from Homero"....it is somewhere in the developers section.
Hope it helps you

Maybe this helps you to repair your device, try it
http://forum.xda-developers.com/showthread.php?t=1975274
Sent from my LG-P990 using xda app-developers app

[Q] bootloop in cyanogen 10.1

a few days ago i dropped my galaxy s2 in the toilet(dont laugh) so i went to using my brother's old s plus I9001.
long story short,i tried to upgrade the 2.3.3 to a 4.2.2 Jellybean using this guide : http://au.ibtimes.com/articles/4579...alaxy-s-plus-i9001-android-4.htm#.VAWoGfmSzGA
i searched a few other guides beforehand,most of which stated that i need a rooted phone,so i rooted it using a guide i found on this forum(here : http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001)
this is everything i did :
1. Connect the Galaxy S Plus to your computer.
2. Unrar the CM 10.1 firmware RAR file you have downloaded
3. Copy the CM 10.1 firmware you have extracted from the unrar file to the SD card of your phone.
4. Turn off the Galaxy S Plus.
5. Reboot the device into Recovery mode. Press Volume up + Home + Power keys simultaneously. You can flash this ROM using the stock recovery or a custom recovery app.
6. In the Recovery mode, select "wipe data/factory reset" and "wipe cache partition."
7. Then select "install zip from SD card" and "choose zip from SD card." Search for the firmware you have copied on the device.
8. Select the firmware file and install it.
9. Go back and select "reboot system now."
so everything went well,until i tried rebooting the device.im stuck now at the cyanogenmod logo.basically i have a boot loop isue.
being a noob at these kind of things,my first thought was that my phone had bircked,so i followed an unbricking tutorialobviously,it didnt work.
can you please help me solve this bootloop s**t? :good::good:

First of all flash TWRP (Recovery).
Then download CM 10.2 from here and copy it in your internal SD card.
Boot into Recovery.
Do a Data & Cache wipe and finally flash CM 10.2.
Optionally: Flash Gapps (Google Apps)
Also read this.

thanks for the reply,but there is a problem. i cant copy anything in my phone,becuase its shut down.ive tried with samsung kies,but its still not working

dr.otcopusseh said:
thanks for the reply,but there is a problem. i cant copy anything in my phone,becuase its shut down.ive tried with samsung kies,but its still not working
Click to expand...
Click to collapse
Boot into Recovery and go to mounts and storage.
Then connect your device to your computer and select mount USB storage.

dr.otcopusseh said:
thanks for the reply,but there is a problem. i cant copy anything in my phone,becuase its shut down.ive tried with samsung kies,but its still not working
Click to expand...
Click to collapse
kalpetros said:
First of all flash TWRP (Recovery).
Then download CM 10.2 from here and copy it in your internal SD card.
Boot into Recovery.
Do a Data & Cache wipe and finally flash CM 10.2.
Optionally: Flash Gapps (Google Apps)
Also read this.
Click to expand...
Click to collapse
thanks for the reply,but there is a problem.i cant acces my phones memory(or copy anything on it) because its shut down.ive tried with samsung kies,but it still doesnt work.
sorry for posting again,but i wasnt sure if you'd see this without me replying to you

See my answer above.

kalpetros said:
Boot into Recovery and go to mounts and storage.
Then connect your device to your computer and select mount USB storage.
Click to expand...
Click to collapse
i flashed twrp and i downloaded cm10.2,but now when i boot into recovery(volume up+power) it shows me the twrp menu,and the usb mounting doesnt work anymore.i press mount>mount usb storage>connect the usb cable,and nothing happens.

dr.otcopusseh said:
i flashed twrp and i downloaded cm10.2,but now when i boot into recovery(volume up+power) it shows me the twrp menu,and the usb mounting doesnt work anymore.i press mount>mount usb storage>connect the usb cable,and nothing happens.
Click to expand...
Click to collapse
Then download CWM Recovery and try it again.
Remember to flash TWRP after that.

kalpetros said:
Then download and try it again.
Remember to flash TWRP after that.
Click to expand...
Click to collapse
but i cant get cmw recovery on my phone if i cant acces the memory :/

try using Aroma File Manager here http://forum.xda-developers.com/showthread.php?t=1646108 it won't install to your phone, it's a temporary file manager that you flash in recovery.

the problem is that i cant copy anything on my sd card,because my computer doesnt recognize the phone anymore after flashing twrp

dr.otcopusseh said:
but i cant get cmw recovery on my phone if i cant acces the memory :/
Click to expand...
Click to collapse
Flash CWM Recovery using Odin.
Read this (How to install ODIN Version).
Download the following:
Odin
CWM Recovery
AriesVE.ops
If it still doesn't work I suggest you to go back to stock and repeat the procedure.

kalpetros said:
Flash CWM Recovery using Odin.
Read this.
Click to expand...
Click to collapse
im trying to flash with odin,but i cant find any .ops in the cw zip.
i even tried downloading other cw versions,but none of them have .ops..

dr.otcopusseh said:
im trying to flash with odin,but i cant find any .ops in the cw zip.
i even tried downloading other cw versions,but none of them have .ops..
Click to expand...
Click to collapse
I updated my answer above.

im not getting anything on the COM port mapping.also,my computer doesnt make any sound when i plug my phone,like it used to do before flashing twrp.should i go back to stock or is this a whole different problem?

dr.otcopusseh said:
im not getting anything on the COM port mapping.also,my computer doesnt make any sound when i plug my phone,like it used to do before flashing twrp.should i go back to stock or is this a whole different problem?
Click to expand...
Click to collapse
Make sure the Samsung USB Drivers are installed. Also uninstall/disable KIES (if it's installed).

i did that but it didnt work.i found out that the computer only recognizes my phone when it's in download mode,so i can only flash through odin.currently trying to flash cwm,but it beats me.currently trying to return to a stock rom,will post updates

kalpetros said:
Make sure the Samsung USB Drivers are installed. Also uninstall/disable KIES (if it's installed).
Click to expand...
Click to collapse
sorry for the late reply(weeks late).i didn't manage to make it work,so i just abandoned it until one day my brother picked the phone up,turned it on,and it suddenly started to work :|
thanks for the help man