Related
got a question probably a stupid one, is it possibile that i cant install CM10 rom on my Galaxy s+ coz im trying to install it from the internal sd card (internal phone memory) coz i dont have an external sd card.... when im trying to install it in recovery mod it gives me the following error:
e:Error in /emmc/cm-10-20121125-ivendor-alpha5-ariesve.zip status7 installation aborted ... i guess its becose im trying to install it from the internal sd card but it worked also like this with other roms i tried, so is there a way i can install the rom in odin without having to use the recovery mode or any other way i can solve this problem?
Napster4 said:
got a question probably a stupid one, is it possibile that i cant install CM10 rom on my Galaxy s+ coz im trying to install it from the internal sd card (internal phone memory) coz i dont have an external sd card.... when im trying to install it in recovery mod it gives me the following error:
e:Error in /emmc/cm-10-20121125-ivendor-alpha5-ariesve.zip status7 installation aborted ... i guess its becose im trying to install it from the internal sd card but it worked also like this with other roms i tried, so is there a way i can install the rom in odin without having to use the recovery mode or any other way i can solve this problem?
Click to expand...
Click to collapse
Hi,
not sure, but have you flashed twice?
moreover, check this thread - probably might give you an answer: http://forum.xda-developers.com/showthread.php?t=2046400
BTW internal card should be ok...
Napster4 said:
got a question probably a stupid one, is it possibile that i cant install CM10 rom on my Galaxy s+ coz im trying to install it from the internal sd card (internal phone memory) coz i dont have an external sd card.... when im trying to install it in recovery mod it gives me the following error:
e:Error in /emmc/cm-10-20121125-ivendor-alpha5-ariesve.zip status7 installation aborted ... i guess its becose im trying to install it from the internal sd card but it worked also like this with other roms i tried, so is there a way i can install the rom in odin without having to use the recovery mode or any other way i can solve this problem?
Click to expand...
Click to collapse
Flash the latest CWM for Galaxy S Plus and try again.
This is how to flash it:
Download Odin Multidownloader 4.43.
Download AriesVE.ops.
Download recovery-clockwork-6.0.1.9-ariesve.tar.md5.
Than follow these steps:
Turn off the phone and make sure it is disconnected from the PC.
Boot the phone into Download Mode. To do so, press and hold down the Volume Down, Home, and Power buttons until the screen turns on and an Android icon in yellow appears.
Close Samsung Kies Process from Task Manager.
Double-click Odin3 v4.43.exe to open Odin on your PC.
Connect the phone to your PC.
You should see a message that says “Added” in Odin. If not, there might be a problem with your drivers.
Click on the OPS button and select the AriesVE.ops file.
Click the PDA button and select the recovery-clockwork-6.0.1.9-ariesve.tar.md5 file.
Click the Start button to begin installation. Once installation is done, you should see a PASS message. You’re now free to unplug the phone from the PC.
I hope it helps.
@nameh: what do u mean by have u flashed twice? i flashed the stock rom before then i installed the recovery 1.2 with odin and then i installed the broodROM Business Edition v1.2 rom with the recovery mode... now i wanted to try cm10 but im getting this strange error
@educk: i already installed the recovery clockwork and i installed the broodROM Business Edition v1.2 with it and it works but when im trying to install cm10 im getting that error
Mostly you get this error message when you're flashing a Rom with different partition layout from the existing one.
Just flash again the Rom and you will succeed. Sometimes it will take 3 flashes to finish it.
Good luck.
Sent from my GT-I9000 using xda app-developers app
Napster4 said:
@nameh: what do u mean by have u flashed twice? i flashed the stock rom before then i installed the recovery 1.2 with odin and then i installed the broodROM Business Edition v1.2 rom with the recovery mode... now i wanted to try cm10 but im getting this strange error
Click to expand...
Click to collapse
I remember from the day I flashed for the first time (CM9) I received the same error message. When I searched I realized that most troubleshooting says you have to flash twice the same ROM. So you flash it once, then again into recovery mode and flash again (the same ROM).
When I did that everything was solved and working fine.
so basiclly i have to flash the stock rom twice then reinstall the recovery mode 1.2 and try it again? or can i also flash the broodROM Business Edition v1.2 rom again and try if it works?
I would try the second part -
Napster4 said:
....flash the broodROM Business Edition v1.2 rom again and try if it works?
Click to expand...
Click to collapse
nope flashed the same rom twice and tried to install cm10 rom but im still getting the same error ;(
Napster4 said:
nope flashed the same rom twice and tried to install cm10 rom but im still getting the same error ;(
Click to expand...
Click to collapse
I see... Could you try reverting back and trying from scratch? Or does CM10 works fine being alone on the phone?
dont have cm10 installed now coz i cant install it (getting that error) right now i flashed the cranium rc9 rom and it works fine... ill try to flash that twice to and then try to flash cm10... if that dosnt work ill try to flash the factory rom and then try from the start... dont know what else i could do
Napster4 said:
dont have cm10 installed now coz i cant install it (getting that error) right now i flashed the cranium rc9 rom and it works fine... ill try to flash that twice to and then try to flash cm10... if that dosnt work ill try to flash the factory rom and then try from the start... dont know what else i could do
Click to expand...
Click to collapse
One more idea - could you try to install CM9 and from there go on to CM10?
good idea ill try that to... thx for your fast answers
tried flashing factory rom reinstalling recovery mode 1.2 and then flashing cm10 but im still getting the same error *_* seems i wont be able to try the cm10 rom but its strange coz most of the other roms work and i can install them
Napster4 said:
tried flashing factory rom reinstalling recovery mode 1.2 and then flashing cm10 but im still getting the same error *_* seems i wont be able to try the cm10 rom but its strange coz most of the other roms work and i can install them
Click to expand...
Click to collapse
I would say that the problem might be related to different partition scheme CM10 uses. Have you tried the CM9->CM10?
nameh said:
I would say that the problem might be related to different partition scheme CM10 uses. Have you tried the CM9->CM10?
Click to expand...
Click to collapse
i did when trying to install cm9 im getting the same error
Napster4 said:
i did when trying to install cm9 im getting the same error
Click to expand...
Click to collapse
Could you try reverting to stock, then to CM9 and then to CM10. Just plain ROMs?
nameh said:
Could you try reverting to stock, then to CM9 and then to CM10. Just plain ROMs?
Click to expand...
Click to collapse
not really coz i cant find the cm9 and cm10 as .tar to install them with odin i can only find them as .zip to install them with recovery 1.2
Napster4 said:
not really coz i cant find the cm9 and cm10 as .tar to install them with odin i can only find them as .zip to install them with recovery 1.2
Click to expand...
Click to collapse
If you a) revert back to stock with odin, then b) get into the stock ROM, you should be able to c) copy the zip files into the phone and d) install them from the recovery, cant you?
nameh said:
If you a) revert back to stock with odin, then b) get into the stock ROM, you should be able to c) copy the zip files into the phone and d) install them from the recovery, cant you?
Click to expand...
Click to collapse
u mean installing the stockrom but then not install the revovery 1.2 but trying to install the roms with the stock recovery mode?
Hi All,
I've tried to find the answer but cannot see one specific to what I am experiencing.
I followed the guide from wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
Semaphore's ClockworkMod Recovery was not working so I used the file from Replicant's recovery.img as per instructions at bottom of the page.
I followed the instructions. I rooted the phone, but I'm stuck. I can get into the recovery mode but I cannot mount the phone back to the PC so I can put the CM zip file onto the sdcard.
As soon as I turn on the phone, it goes into the CM Recovery menu.
Anyone know how to get the phone to mount to the PC and how I can get a CM image to the phone to install?
Thanks, please help. Need to get this phone working as I want to give it to my daughter to use in Italy.
malvic88 said:
Hi All,
I've tried to find the answer but cannot see one specific to what I am experiencing.
I followed the guide from wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
Semaphore's ClockworkMod Recovery was not working so I used the file from Replicant's recovery.img as per instructions at bottom of the page.
I followed the instructions. I rooted the phone, but I'm stuck. I can get into the recovery mode but I cannot mount the phone back to the PC so I can put the CM zip file onto the sdcard.
As soon as I turn on the phone, it goes into the CM Recovery menu.
Anyone know how to get the phone to mount to the PC and how I can get a CM image to the phone to install?
Thanks, please help. Need to get this phone working as I want to give it to my daughter to use in Italy.
Click to expand...
Click to collapse
Put ur phone in download mode return to stock 2.3.6 then root it again and flash a different ROM or flash a differant kernel using Odin should fix ur problems
Sent from my GT-I9000 using xda premium
kevtrysmoddin said:
Put ur phone in download mode return to stock 2.3.6 then root it again and flash a different ROM or flash a differant kernel using Odin should fix ur problems
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Thanks, but I figured it out late last night. In recovery mode, there is an option to turn on USB mode. With USB on, the PC will see the phone. I downloaded the CM image (zip) to install. Put this into the root folder. Also downloaded the correct Google App as described in the link and put this into the root of the phone.
Turn off the USB. Leave phone plugged into the pc. With recovery mode, select install zip and select the CM zip file you put onto the root. This will install the CM. It will do this twice to convert the phone file system.
Phone will boot up and your in with CM. Now turn off and boot phone into recovery mode again using 3 button method. Select the Google apps zip file to install. This will install the Google Play and other software. Reboot and setup the phone!
Got the Galaxy S i9000 working again!
Hi
I installed twrp recovery and then cm10.1 to test it. After a while i decided to go back to stock. Instead of using the backup i made i decided to flash official stock using odin but i only get bootloop.
What i did:
1-Changed cable
2-Removed battery
3-Removed sim/memory card
4-Flashed "param_I8190.tar"
5-Flashed pre rooted firmware 4.1.2 that i always used
6-Flashed stock, untouch 4.1.2
7-Flashed stock, untouch 4.1.1
8-Combitanion of keys does not work for recovery, only works for download mode. I can not enter into recovery mode.
9-My windows no longer recognizes my phone. Every time i plug in i get a message error.
Nothing worked. How to solve this? Thanks
Install the drivers from this tool and when you plug your phone in you have to go into windows device manager and manually install the driver you received from the tool. Its a bit tricky.
http://forum.xda-developers.com/showthread.php?t=2185700
Sent from my GT-I8190 using Tapatalk 2
slowdyve said:
Hi
I installed twrp recovery and then cm10.1 to test it. After a while i decided to go back to stock. Instead of using the backup i made i decided to flash official stock using odin but i only get bootloop.
What i did:
1-Changed cable
2-Removed battery
3-Removed sim/memory card
4-Flashed "param_I8190.tar"
5-Flashed pre rooted firmware 4.1.2 that i always used
6-Flashed stock, untouch 4.1.2
7-Flashed stock, untouch 4.1.1
8-Combitanion of keys does not work for recovery, only works for download mode. I can not enter into recovery mode.
9-My windows no longer recognizes my phone. Every time i plug in i get a message error.
Nothing worked. How to solve this? Thanks
Click to expand...
Click to collapse
1) battery full charge.
2) install rom official 3 parts:
http://forum.xda-developers.com/showthread.php?t=2157282
3) install your favorite rom
iKlutz said:
Install the drivers from this tool and when you plug your phone in you have to go into windows device manager and manually install the driver you received from the tool. Its a bit tricky.
http://forum.xda-developers.com/showthread.php?t=2185700
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
That was one of the things i tried. Didn't work. But thanks for helping
ambiorix88 said:
1) battery full charge.
2) install rom official 3 parts:
http://forum.xda-developers.com/showthread.php?t=2157282
3) install your favorite rom
Click to expand...
Click to collapse
This was the (only) solution that worked. Problem solved. Thanks ambiorix88 :good:
You need to do a factory reset, or the stock rom will go into boot loop.
Install the 3 button combo for recovery (you'll find the patch on the forum), start in recovery and wipe cache / data.
My device is GT-I8190XXAMD3.I had maclaw's cm 10.2 installed.I was trying to flash dmod v6.I entered into recovery mode and did the usual procedures before flasing a new ROM like wiping cache and i also accidently formatted system.I had put the zip file of dmod v6 in external sd card.But when I tried to install zip from external storage it shows as can't mount sd card.Then I rebooted and the phone is stuck with the starting logo...Help please,,,,
ATHATH said:
My device is GT-I8190XXAMD3.I had maclaw's cm 10.2 installed.I was trying to flash dmod v6.I entered into recovery mode and did the usual procedures before flasing a new ROM like wiping cache and i also accidently formatted system.I had put the zip file of dmod v6 in external sd card.But when I tried to install zip from external storage it shows as can't mount sd card.Then I rebooted and the phone is stuck with the starting logo...Help please,,,,
Click to expand...
Click to collapse
I think you need to connect the phone to a computer using a USB cable, reboot to Download mode and flash new ROM using Odin method.
AdliHebat said:
I think you need to connect the phone to a computer using a USB cable, reboot to Download mode and flash new ROM using Odin method.
Click to expand...
Click to collapse
it worked..you saved my day!!
hy
i have the same broblem but... is not working in my case , i flash ader rom whit odin and it PASS after reboot is stack in logo boot and loop.i cand enter in recovery mode not by combination off key and needer whit ADB
please help & excuse my englesh.
Can kies detect phone?
Sent from my GT-P1000 using Tapatalk
robindebruin said:
Can kies detect phone?
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
NO !!:crying: i triat to flash ader roms and same thing
What if you flash new recovery or restock it
Sent from my GT-P1000 using Tapatalk
robindebruin said:
What if you flash new recovery or restock it
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
same o
flash custom recovery
flash cm10.2 rom oficial
im trying now to re-repartiton and NAND Flash erase all
it workt!!! yupi is booting cm 10.2
hope is not looping
Ok hope it helps
Sent from my GT-P1000 using Tapatalk
ATHATH said:
My device is GT-I8190XXAMD3.I had maclaw's cm 10.2 installed.I was trying to flash dmod v6.I entered into recovery mode and did the usual procedures before flasing a new ROM like wiping cache and i also accidently formatted system.I had put the zip file of dmod v6 in external sd card.But when I tried to install zip from external storage it shows as can't mount sd card.Then I rebooted and the phone is stuck with the starting logo...Help please,,,,
Click to expand...
Click to collapse
you cant depend on odin everytime use three way recovery for cwm
http://forum.xda-developers.com/showthread.php?t=2157105
use twrp where the interface islarge so u wont make any mistakes [u can find it in maclaw.pl / downloads /s3 mini/extras]
a few days ago i dropped my galaxy s2 in the toilet(dont laugh) so i went to using my brother's old s plus I9001.
long story short,i tried to upgrade the 2.3.3 to a 4.2.2 Jellybean using this guide : http://au.ibtimes.com/articles/4579...alaxy-s-plus-i9001-android-4.htm#.VAWoGfmSzGA
i searched a few other guides beforehand,most of which stated that i need a rooted phone,so i rooted it using a guide i found on this forum(here : http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001)
this is everything i did :
1. Connect the Galaxy S Plus to your computer.
2. Unrar the CM 10.1 firmware RAR file you have downloaded
3. Copy the CM 10.1 firmware you have extracted from the unrar file to the SD card of your phone.
4. Turn off the Galaxy S Plus.
5. Reboot the device into Recovery mode. Press Volume up + Home + Power keys simultaneously. You can flash this ROM using the stock recovery or a custom recovery app.
6. In the Recovery mode, select "wipe data/factory reset" and "wipe cache partition."
7. Then select "install zip from SD card" and "choose zip from SD card." Search for the firmware you have copied on the device.
8. Select the firmware file and install it.
9. Go back and select "reboot system now."
so everything went well,until i tried rebooting the device.im stuck now at the cyanogenmod logo.basically i have a boot loop isue.
being a noob at these kind of things,my first thought was that my phone had bircked,so i followed an unbricking tutorialobviously,it didnt work.
can you please help me solve this bootloop s**t? :good::good:
First of all flash TWRP (Recovery).
Then download CM 10.2 from here and copy it in your internal SD card.
Boot into Recovery.
Do a Data & Cache wipe and finally flash CM 10.2.
Optionally: Flash Gapps (Google Apps)
Also read this.
thanks for the reply,but there is a problem. i cant copy anything in my phone,becuase its shut down.ive tried with samsung kies,but its still not working
dr.otcopusseh said:
thanks for the reply,but there is a problem. i cant copy anything in my phone,becuase its shut down.ive tried with samsung kies,but its still not working
Click to expand...
Click to collapse
Boot into Recovery and go to mounts and storage.
Then connect your device to your computer and select mount USB storage.
dr.otcopusseh said:
thanks for the reply,but there is a problem. i cant copy anything in my phone,becuase its shut down.ive tried with samsung kies,but its still not working
Click to expand...
Click to collapse
kalpetros said:
First of all flash TWRP (Recovery).
Then download CM 10.2 from here and copy it in your internal SD card.
Boot into Recovery.
Do a Data & Cache wipe and finally flash CM 10.2.
Optionally: Flash Gapps (Google Apps)
Also read this.
Click to expand...
Click to collapse
thanks for the reply,but there is a problem.i cant acces my phones memory(or copy anything on it) because its shut down.ive tried with samsung kies,but it still doesnt work.
sorry for posting again,but i wasnt sure if you'd see this without me replying to you
See my answer above.
kalpetros said:
Boot into Recovery and go to mounts and storage.
Then connect your device to your computer and select mount USB storage.
Click to expand...
Click to collapse
i flashed twrp and i downloaded cm10.2,but now when i boot into recovery(volume up+power) it shows me the twrp menu,and the usb mounting doesnt work anymore.i press mount>mount usb storage>connect the usb cable,and nothing happens.
dr.otcopusseh said:
i flashed twrp and i downloaded cm10.2,but now when i boot into recovery(volume up+power) it shows me the twrp menu,and the usb mounting doesnt work anymore.i press mount>mount usb storage>connect the usb cable,and nothing happens.
Click to expand...
Click to collapse
Then download CWM Recovery and try it again.
Remember to flash TWRP after that.
kalpetros said:
Then download and try it again.
Remember to flash TWRP after that.
Click to expand...
Click to collapse
but i cant get cmw recovery on my phone if i cant acces the memory :/
try using Aroma File Manager here http://forum.xda-developers.com/showthread.php?t=1646108 it won't install to your phone, it's a temporary file manager that you flash in recovery.
the problem is that i cant copy anything on my sd card,because my computer doesnt recognize the phone anymore after flashing twrp
dr.otcopusseh said:
but i cant get cmw recovery on my phone if i cant acces the memory :/
Click to expand...
Click to collapse
Flash CWM Recovery using Odin.
Read this (How to install ODIN Version).
Download the following:
Odin
CWM Recovery
AriesVE.ops
If it still doesn't work I suggest you to go back to stock and repeat the procedure.
kalpetros said:
Flash CWM Recovery using Odin.
Read this.
Click to expand...
Click to collapse
im trying to flash with odin,but i cant find any .ops in the cw zip.
i even tried downloading other cw versions,but none of them have .ops..
dr.otcopusseh said:
im trying to flash with odin,but i cant find any .ops in the cw zip.
i even tried downloading other cw versions,but none of them have .ops..
Click to expand...
Click to collapse
I updated my answer above.
im not getting anything on the COM port mapping.also,my computer doesnt make any sound when i plug my phone,like it used to do before flashing twrp.should i go back to stock or is this a whole different problem?
dr.otcopusseh said:
im not getting anything on the COM port mapping.also,my computer doesnt make any sound when i plug my phone,like it used to do before flashing twrp.should i go back to stock or is this a whole different problem?
Click to expand...
Click to collapse
Make sure the Samsung USB Drivers are installed. Also uninstall/disable KIES (if it's installed).
i did that but it didnt work.i found out that the computer only recognizes my phone when it's in download mode,so i can only flash through odin.currently trying to flash cwm,but it beats me.currently trying to return to a stock rom,will post updates
kalpetros said:
Make sure the Samsung USB Drivers are installed. Also uninstall/disable KIES (if it's installed).
Click to expand...
Click to collapse
sorry for the late reply(weeks late).i didn't manage to make it work,so i just abandoned it until one day my brother picked the phone up,turned it on,and it suddenly started to work :|
thanks for the help man