[Q] how to increase ram plz help me phone galaxy s advance - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

i m googling about it but not sure...so plz help me to easly incream mie phone ram.??galaxy s advance

hackpistol said:
i m googling about it but not sure...so plz help me to easly incream mie phone ram.??galaxy s advance
Click to expand...
Click to collapse
Buy another device with more RAM.

U can't increase ram
U can use u r sdcard memory as ram by making swap partion but it makes u r phone slower than before
Use cm 10.2 18/11 built its faster smoother and no lag
Sent from my GT-I9070 using xda premium

Maybe he is thinking of the same problem I'm facing with.
I have 550mb of ram available instead of ~625, on CM10.2.
It was similar on the stock rom, too.
I wrote about it here somewhere... and I would appreciate an advice how to solve it...

jazzh said:
Maybe he is thinking of the same problem I'm facing with.
I have 550mb of ram available instead of ~625, on CM10.2.
It was similar on the stock rom, too.
I wrote about it here somewhere... and I would appreciate an advice how to solve it...
Click to expand...
Click to collapse
Try to flash stock JB again. You was on JB when you installed CM?

shut_down said:
Try to flash stock JB again. You was on JB when you installed CM?
Click to expand...
Click to collapse
Yes, XXLQE + cocore twrp. It was the same ram amount in stock. I upgraded to stock JB through kies, not odin. So how do you think I should flash stock again? Odin?

Free ram is wasted ram in android
Inviato dal mio GT-I9070 utilizzando Tapatalk

jazzh said:
Yes, XXLQE + cocore twrp. It was the same ram amount in stock. I upgraded to stock JB through kies, not odin. So how do you think I should flash stock again? Odin?
Click to expand...
Click to collapse
Yeah, try to flash it again.

Enable KSM in performance settings if you are on cm and you will have more free ram
Sent from my GT-I9070 using xda app-developers app

frapeti said:
Enable KSM in performance settings if you are on cm and you will have more free ram
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Thx frapeti!
I'm on CM 10.2 and I've just switched KSM on. I was suspicious of it, but I'll try it now.
When next CM release comes out, I'll try to make some more free time to permanently solve my ram issue (Odin jb flash) before upgrading to next cm release...

Related

[Q] Jb 4.1.2 lag problem

My jb always hangs my mobile while playing games.:crying: . I need to restart my mobile several times in a day. I think 625 mb ram is not enough for my mobile.
So, is this possible to extend ram more than 1 gb ?
If it is, then what's the procedure ?
srbroy9755 said:
My jb always hangs my mobile while playing games.:crying: . I need to restart my mobile several times in a day. I think 625 mb ram is not enough for my mobile.
So, is this possible to extend ram more than 1 gb ?
If it is, then what's the procedure ?
Click to expand...
Click to collapse
The lag problem is there. Use custom kernel to reduce it. Alternatively look at Super charger thread too
srbroy9755 said:
My jb always hangs my mobile while playing games.:crying: . I need to restart my mobile several times in a day. I think 625 mb ram is not enough for my mobile.
So, is this possible to extend ram more than 1 gb ?
If it is, then what's the procedure ?
Click to expand...
Click to collapse
You can't extend ram anymore than this because the phone has only 768 mb of ram total. Try using cocore to reduce lag.
Sent from my GT-I9070 using xda app-developers app
Try swapping from memory card.
It decreases ram usage and saves battery but it lags.
Better use class 4 or 6 nemory card.
Sent from my GT-I9070 using xda app-developers app
It is not possible to extend ram the 1ly solution is root ur phone and install m10.1 latest build 21/06/2013 and see the difference don't go to swapping or any new kernel because i have followed almost all possible method to make it fast finally i got this 1
Sent from my GT-I9070 cm10.1 smooth as hell using xda premium
But which game? All?
This is impossible.
There will always be something that will not perform well (app or game ... This is normal).
But all?
I can only say that this is not common.
Have you read this forum .
seems to have come now and just wrote it.
Strange, but s3 mini runs stock jelly bean pretty smooth and fast, even though we have almost the same hardware.
But it looks ugly as hell
Sent from my GT-I9070 using xda app-developers app
try CoCore, LightJB and Crossbreeder, fast and no lags
Wysyłane z mojego GT-I9070 za pomocą Tapatalk 2
Me also. I tried using cocore but no changes. Lag and lag
Sent from my GT-I9070 using xda app-developers app
try to backup your app with titanium backup and do a factory reset or install a better firmware. Install cocore 7.0 CWM or 6.2
After all restore your apps.
I havent any lag on LQG but i have a strange touchscreen issue when i unplug a cable.
sufianhakim7 said:
Me also. I tried using cocore but no changes. Lag and lag
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
If you have a lot of installed apps that are running in background you will have lag.
Послато са GT-I9070 користећи Тапаток 2
Using harshjelly Rom + cocore + crossbreeder and the phone is running butter smooth. No lag. LightJB has been discontinued.
Sent from my GT-I9070 using Tapatalk 2
Seriously, just go back to GB... Problem solved
Sent from my GT-I9070 using xda app-developers app
effin_rad said:
Seriously, just go back to GB... Problem solved
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Of course ...
But it's difficult to go back to a very old version of Android.
There are a lot of nice feature in JB, and some apps are better in JB than in GB (Gmail, Gmaps ...)
It's really a shame that Samsung has mad a so bad JB version for our device, it's too heavy, too slow ...
When we test CM10 or CM10.1 all seems to be faster and lighter. But there are some bugs and limitations that are a bit boring.
I just nought a tablet. Stock Android google edition 4.1.1. Its the same problem im every 4.1 edition...
Verstuurd van mijn CTP818 met Tapatalk
Try using No-frills CPU Control, use pegasusq as governer and sio for scheduler.
Unkn0wNx said:
Try using No-frills CPU Control, use pegasusq as governer and sio for scheduler.
Click to expand...
Click to collapse
And this, plus Nova Launcher.
Use LightJB with Cocore 7
GT-I9500 cihazımdan Tapatalk 2 ile gönderildi
this will work
i too tried official jb indian update and there are few lags too.
i rooted my phone
guide to root jb here by Shaaan
installed [ROM] [JB] SUPRESSED ROM.. link here rom by achyut
well your problems will be solved , if you want you can try
[MOD] ◢ PurePerformances™X by jeeko
thanks
CoolGuru said:
i too tried official jb indian update and there are few lags too.
i rooted my phone
guide to root jb here by Shaaan
installed [ROM] [JB] SUPRESSED ROM.. link here rom by achyut
well your problems will be solved , if you want you can try
[MOD] ◢ PurePerformances™X by jeeko
thanks
Click to expand...
Click to collapse
+1 for [MOD] ◢ PurePerformances™X :good:

Best kernel

Hello guys
I wanna know that what is the best available kernel for s advance jb rom?
My brothers phone always lags and freezes sudenly
I tried some stock roms. But nothing chsnged
Is there any rom or kernel to redeuse these lags?
Tnx
Sent from my GT-S5660 using Tapatalk 4 Beta
I don't think any kernel will solve lag problem. I tried everything finally my suggestion is follow this formula
root u r phone+install latest cm10.1 nightly+flash pure performance xmod
+ using root explorer delete some barebone system apps like live wallpaper, truchbucket launcher, Latin keyboard etc(use alternate app for launcher and keyboard) + install greenify from playstore= galaxy s advance fast as hell as never before
galaxy s advance fast as hell cm10.1 4.2.2
Yes cm10.1 is fast but camera dosent work
Sent from my GT-S5660 using Tapatalk 4 Beta
MH-Droid said:
Yes cm10.1 is fast but camera dosent work
Sent from my GT-S5660 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Use stock JB with cocore 6.8 and delete samsung bloatwares..u dont need to do anything else..ur phone will b fast like hell..this cm10.1 is full of bugs, nothin can beat stock.
Sent from my GT-I9070 using xda app-developers app
MH-Droid said:
Hello guys
I wanna know that what is the best available kernel for s advance jb rom?
My brothers phone always lags and freezes sudenly
I tried some stock roms. But nothing chsnged
Is there any rom or kernel to redeuse these lags?
Tnx
Sent from my GT-S5660 using Tapatalk 4 Beta
Click to expand...
Click to collapse
use stock rom and flash cocore 6.8
use no frill config abysaplug+zen
remove bloat
thats it
ur phone will not lag that much
only sometimes in ui
Rom-DDULP8
Kernel-CoCore-E 6.8 (abyssplug+zen)
flash CoCore &LightJB
satisfaction guaranted
Wysyłane z mojego GT-I9070 za pomocą Tapatalk 2
simplyanin said:
Use stock JB with cocore 6.8 and delete samsung bloatwares..u dont need to do anything else..ur phone will b fast like hell..this cm10.1 is full of bugs, nothin can beat stock.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
cm10.1 is beta... obviously having bugs :crying:
But stock with Cocore 6.8 works fine and smooth
MH-Droid said:
Hello guys
I wanna know that what is the best available kernel for s advance jb rom?
My brothers phone always lags and freezes sudenly
I tried some stock roms. But nothing chsnged
Is there any rom or kernel to redeuse these lags?
Tnx
Sent from my GT-S5660 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Use the Kernel CoCore 6.8 on JB 4.1.2
I use cocore kernel 7.6 cmw + harshjelly rom 2.2 (android 4.1.2) . My phone is realy faster , no video lags, more free ram space and all working without bugs... try it!!
rafelkrok said:
I use cocore kernel 7.6 cmw + harshjelly rom 2.2 (android 4.1.2) . My phone is realy faster , no video lags, more free ram space and all working without bugs... try it!!
Click to expand...
Click to collapse
I agree i only have HJ v2.1 with cocore v7.6+twrp
Sent from my GT-I9070 using xda app-developers app
Thread closed as its a Best kernel thread.

[Q] My S advance Lags and freeze after JB Update

Hi there everybody
first of all i wanna thank you for this amazing Site and Forum.....i really like it and appreciate your efforts here
so my story is simple.....
as you all know that JB 4.1.2 is out for a while now.....but in my country it's not available until now so i decided to update manually
and it work really.....i used the 4.1.2 XXLQG version (don't now if this is the most stable or not)
but after updating my mobile is lagging like hell and freezes when running a game or any heavy apps
so i don't know what to do???.....is this ver of JB not Stable or something??....
if there is any whay to help me it'll be great....
thank You all
Did u factory reset and wipe cache after upgrading? If not do it. LQG is good. Flash CoCore E 7.2 kernel and feel the smoothness.
Sent from my GT-I9070 using xda premium
phyowaiummg said:
Did u factory reset and wipe cache after upgrading? If not do it. LQG is good. Flash CoCore E 7.2 kernel and feel the smoothness.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
thanks alot for the reply.....but i'm abit of a noob at android can you tell me how to do that
ok i've done the first step but what is (Flash CoCore E 7.2 kernel ) ?
sorry but like i said i'm new to android
totta_fadil said:
thanks alot for the reply.....but i'm abit of a noob at android can you tell me how to do that
ok i've done the first step but what is (Flash CoCore E 7.2 kernel ) ?
sorry but like i said i'm new to android
Click to expand...
Click to collapse
Root your JB and use universal kernel flash app to update to cocore 7.2. It is an zip you can unpack and use the bin file in the ukf app, then reboot
Sent from my GT-I9070 using xda app-developers app
Phoneboot said:
Root your JB and use universal kernel flash app to update to cocore 7.2. It is an zip you can unpack and use the bin file in the ukf app, then reboot
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
so i need to root my device?
is it dangerous?
and the steps....is it here in the forum?
and also what is the advantage of "this" (cocore7.2)
Use this guide for all...
http://forum.xda-developers.com/showthread.php?t=2198341
Sent from my CM10.1
R_a_z_v_a_n said:
Use this guide for all...
http://forum.xda-developers.com/showthread.php?t=2198341
Sent from my CM10.1
Click to expand...
Click to collapse
thanks alot guys for the help.....it works fine now
just another question not related to this post
can i now (my phone is rooted).......put games data in my Sd card
I cant flash SGA XXLQG
phyowaiummg said:
Did u factory reset and wipe cache after upgrading? If not do it. LQG is good. Flash CoCore E 7.2 kernel and feel the smoothness.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Hello,
I was trying to flash CoCore E 7.2 in recovery, but after start, there was a problem and there was sign: signature verification failed.
I have installed XXLQG on SGA, and i isnt work corrcetly, there are lags, it is really slowly and i am crazy of starting contact book and dialer. It takes 3 or 4 sec.
I dont know if flash repair it, i dont know. And I dont know why I cant flash CoCore E, CoCore + TWRP. Can anybody help me? I need faster phone.
Thanks
Root your phone first.
And dialer lag its a known bug. Use exDialer from market.
Powered by CM10.1
R_a_z_v_a_n said:
Root your phone first.
Powered by CM10.1
Click to expand...
Click to collapse
It is rooted. Why I cant flash kernel?
Sig verification is on stock recovery. Unzip kernel file and flash kernel md5 file using universal kernel flasher.
Sent from my SGS Adv. using xda-developers app.
th3cr0w said:
Sig verification is on stock recovery. Unzip kernel file and flash kernel md5 file using universal kernel flasher.
Sent from my SGS Adv. using xda-developers app.
Click to expand...
Click to collapse
It is ok now, thanks, for your help
what do you mean by ok
tino26 said:
It is ok now, thanks, for your help
Click to expand...
Click to collapse
what do you mean by ok?
Were you able to update the kernel?
After updating kernel is the phone working fast and normal? Is the dialer lag gone?
What is your current kernel then?
and
What is your current ROM?
You also have to disable signature verification in recovery mode, That should do the trick.
Sent from my GT-I9070 using xda app-developers app
Name your current KERNEL & ROM please
totta_fadil said:
thanks alot guys for the help.....it works fine now
just another question not related to this post
can i now (my phone is rooted).......put games data in my Sd card
Click to expand...
Click to collapse
Could you tell me what your current KERNEL is?
Could you tell me what your current ROM is?
Everything running smooth with this combination?
tino26 said:
It is rooted. Why I cant flash kernel?
Click to expand...
Click to collapse
Delete
phyowaiummg said:
Did u factory reset and wipe cache after upgrading? If not do it. LQG is good. Flash CoCore E 7.2 kernel and feel the smoothness.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I have I9070JVMD1 and stock kernel.
It lags a lot especially the dialer.
also, while playing long video the device goes into coma - I mean it becomes non-responsive.
If I flash CoCore 7.2 kernel should I get rid of the lags?
Nishad1982 said:
I have I9070JVMD1 and stock kernel.
It lags a lot especially the dialer.
also, while playing long video the device goes into coma - I mean it becomes non-responsive.
If I flash CoCore 7.2 kernel should I get rid of the lags?
Click to expand...
Click to collapse
If you flashed the kernel, the lags won't magically disappear but it is considerably reduced because the lags in dialer/camera/contacts are samsung's fault.
Sent from my GT-I9070 using xda app-developers app
tino26 said:
It is rooted. Why I cant flash kernel?
Click to expand...
Click to collapse
-Deleted-
Nishad1982 said:
what do you mean by ok?
Were you able to update the kernel?
After updating kernel is the phone working fast and normal? Is the dialer lag gone?
What is your current kernel then?
and
What is your current ROM?
Click to expand...
Click to collapse
I´ve updated kerner with universal kelner flasher. Yes phone is faster and i am using exdialer. It is better than original samsung dialer, mainly faster.
I´m using CoCore E 7.5 and XXLQG.

[Q] Help a newbie out

Evenin' xda!
I'm the proud owner of a non-rooted SGSA and I am having a couple issues I couldn't get my head around so I was hoping that you guys could give me a hand.
My phone's csc was MTL (not my country's csc) and since I couldn't find any JB version made especially for this csc I flashed one released for my country (COA). It ran really smooth for a couple of weeks but every once in a while my systemUI keeps freezing ,or I get some really annoying lag spikes while performing easy tasks like messaging through the stock app or browsing my contact list.
Now, should I flash some other version of JB , a more stable one, if there is such thing, or should I go ahead and root my device?
Would rooting help me out, and by that I'm asking you to tell me whether there are any stable custom ROMs and/or kernels that I could use? (this is where my inner noob kicks in, I'm pretty helpless )
Thanks a bunch !
P.S. I did try to search for answers but I couldn't find anything useful.
Root I would say is a much better answer to your problem.
Root your phone, flash cocore kernel and debloat your system ie remove unwanted files. This will definetely boost up your phones speed and your phone won't freeze.
If you want to.. you can also try CynogenMod 10.1
#IamNotResponsibleForAnyDamageToYourPhone
szzlgupta said:
Root I would say is a much better answer to your problem.
Root your phone, flash cocore kernel and debloat your system ie remove unwanted files. This will definetely boost up your phones speed and your phone won't freeze.
If you want to.. you can also try CynogenMod 10.1
#IamNotResponsibleForAnyDamageToYourPhone
Click to expand...
Click to collapse
This ^
Sent from my GT-I9070 using xda app-developers app
It might also imply a bad flash
Pls Gimme link to cm 10.1 download nd installation steps
Sent from my GT-I9070 using xda app-developers app
mannulko said:
Pls Gimme link to cm 10.1 download nd installation steps
Click to expand...
Click to collapse
CM10.1 thread - http://forum.xda-developers.com/showthread.php?t=2108362
Installation steps:
1.Download the ROM from the link below
2.Download gapps on http://goo.im/gapps
3.Put the zip files on your SDCard
4.Reboot on Recovery
5.Wipe Data / Factory Reset
6.Select "Install the Zip from External Storage"
7.Choose CM zip file
8.Choose GApps zip file
9.Reboot to system
Click to expand...
Click to collapse
Download latest nightly 09.09.2013: http://goo.im/devs/diegoch/janice/cm-10.1/nightly/cm-10.1-20130909-NIGHTLY-janice.zip
Download gapps link: http://goo.im/gapps/gapps-jb-20130812-signed.zip
R_a_z_v_a_n said:
CM10.1 thread - http://forum.xda-developers.com/showthread.php?t=2108362
Installation steps:
Download latest nightly 09.09.2013: http://goo.im/devs/diegoch/janice/cm-10.1/nightly/cm-10.1-20130909-NIGHTLY-janice.zip
Download gapps link: http://goo.im/gapps/gapps-jb-20130812-signed.zip
Click to expand...
Click to collapse
Do we need to install custom recovery ?
Sent from my GT-I9070 using xda app-developers app
Yep.
Flash kernel with custom recovery, like cocore or thunderzap and after that go to CM10.1.
Here the guide, start from B) point : http://forum.xda-developers.com/showthread.php?t=2198341
R_a_z_v_a_n said:
Yep.
Flash kernel with custom recovery, like cocore or thunderzap and after that go to CM10.1.
Here the guide, start from B) point : http://forum.xda-developers.com/showthread.php?t=2198341
Click to expand...
Click to collapse
Pls give me link to download temp cwm recovery. Link on above page is not working
Sent from my GT-I9070 using xda app-developers app
mannulko said:
Pls give me link to download temp cwm recovery.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1987313
I have installed cwm nd cocore pls see the screen pic if it is ok
Sent from my GT-I9070 using xda app-developers app
mannulko said:
I have installed cwm nd cocore pls see the screen pic if it is ok
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Yes, CoCore is installed. If you want to install some ROM, charge battery. Now as I see you have 20-30%.
Послато са GT-I9070 користећи Тапаталк 4
Pls suggest stable vanilla rom based on 4.2 android.nd should i factory reset or any thing after flashing new kernel?
Sent from my GT-I9070 using xda app-developers app
Can we overclock s advance processor?
Sent from my GT-I9070 using xda app-developers app
Nope.
Pls recommend any power saving kernel.cocore is eating battery like hell
Sent from my GT-I9070 using xda app-developers app
Try Harsh jelly v2.1 with cocore 7.6 it works verry well.
Sent from my GT-I9070 using xda app-developers app
Phoneboot said:
Try Harsh jelly v2.1 with cocore 7.6 it works verry well.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I tried this combination a few days ago and, lags was like hell!!
mannulko, I recommend cm10.1, cause aside from some annoying things such as low volume in call, it's very stable, but you could try some custom roms out there, you could try first version of harsh jelly with any of the cocore kernel, just try different versions and see which one suits you!!!
Shiningb said:
I tried this combination a few days ago and, lags was like hell!!
mannulko, I recommend cm10.1, cause aside from some annoying things such as low volume in call, it's very stable,
Click to expand...
Click to collapse
I installed CM couple of months ago and I had normal volume all the time.
Sent from my GT-I9070 using xda premium
Shiningb said:
I tried this combination a few days ago and, lags was like hell!!
mannulko, I recommend cm10.1, cause aside from some annoying things such as low volume in call, it's very stable, but you could try some custom roms out there, you could try first version of harsh jelly with any of the cocore kernel, just try different versions and see which one suits you!!!
Click to expand...
Click to collapse
Strange i didnt had that with Harsh,
Maybe you flashed it not the proper way.
Sent from my GT-I9070 using xda app-developers app

Need advice on rom

Hi all, i am going on holidays in a week and i need my phone. I want to return to 4.1.2 jelly bean but i am afraid that it freezes when i need it the most. I am currently on t4n017 latest build but there is this annoying bug of screen flashing all the time.
1.Which cocafe's kernel should i use to have a stable and bug free rom?
2. If u suggest a custom rom, which one and y?
Thanks a lot
Sent from my GT-I9070 using XDA Free mobile app
Patlcs said:
Hi all, i am going on holidays in a week and i need my phone. I want to return to 4.1.2 jelly bean but i am afraid that it freezes when i need it the most. I am currently on t4n017 latest build but there is this annoying bug of screen flashing all the time.
1.Which cocafe's kernel should i use to have a stable and bug free rom?
2. If u suggest a custom rom, which one and y?
Thanks a lot
Sent from my GT-I9070 using XDA Free mobile app
Click to expand...
Click to collapse
One tip, put max background apps to 1 or 2. Try SamiOS for example. For kernel, I used latest CoCore - it was ok.
sent pm
@shut_down what rom are u currently using?
Sent from my GT-I9070 using XDA Free mobile app
Chirag's latest PA build, even though is not up to date with the official verison, works very well, especially when paired with apps like myandroidtools( link)
or greenify.
Patlcs said:
@shut_down what rom are u currently using?
Sent from my GT-I9070 using XDA Free mobile app
Click to expand...
Click to collapse
CM10.1, 1117 with 1119 phone.apk.
shut_down said:
CM10.1, 1117 with 1119 phone.apk.
Click to expand...
Click to collapse
I plan to install it, too. Can I simply apply zip from twrp? I'm currently on vanir kitkat.
jazzh said:
I plan to install it, too. Can I simply apply zip from twrp? I'm currently on vanir kitkat.
Click to expand...
Click to collapse
Probably yes. If you fail you can always flash stock JB and then install CM10.1.
Remember that you need to do factory reset after install of another ROM, to avoid getting into a bootloop.
shut_down said:
CM10.1, 1117 with 1119 phone.apk.
Click to expand...
Click to collapse
Where can i download 1119 ROM?

Categories

Resources