Guys-I used Cyanogenmod installer to install CM on sprint htc one. I was not totally happy and used fastboot to relock bootloader with possibly to RUU back to stock. However after relocking the phone will only reboot to bootloader. I tried to use Sprint RUU to flash back to stock but get error message 140 that is not correct version and cannot proceed. Is there something I can do to get out of this mess of my own making?
Thanks!!
Doc
Edit: I tried running the Cyangogenmod Installler again and after trying states my device is not compatible. It did work initially.
Edit:I got unlock token from htc and finally unlocked again and phone rebooted but is now in bootloop with cyanogenmod circle running. I will continue to work on it.
Last update: had to wipe everything while in recovery and finally booted up. Now to set up the phone again....
Related
Ok so how do I start this? Well I got an htc one for christmas and I wanted to root it. Everything was fine until I decided to flash a custom kit kat rom. The rom was stuck in a boot loop so I went back to twrp and flashed my recovery. I thought I fixed everything but then I stopped getting phone service. It kept saying looking for service. I thought it was a bad recovery so I downloaded cm from rom manager. While it was downloading, the phone just randomly rebooted. It kept doing this and still is.so then, being the idiot I am, flashed clockwork recovery to see if it would change anything. I tried downloading cm from rom manager again and finally finished downloading before it started rebooting again. I went into clockwork recovery and flashed cm and now it keeps rebooting and I have no phone service. I have no idea what to do. By switching from twrp to clockwork, I lost my recovery. Im totally screwed. I need help please!What do I do!!!!????
Run an RUU to fix and only flash roms that are made for Sprint or have Sprint support.
Sounds like you flashed a GSM rom that's why everything is jacked up.
BD619 said:
Run an RUU to fix and only flash roms that are made for Sprint or have Sprint support.
Sounds like you flashed a GSM rom that's why everything is jacked up.
Click to expand...
Click to collapse
Thanks a bunch! I'll check this out and see if it works
Rom Update Utility
It will get you back to 100% stock
If you need help PM me I'll be happy to help
roflcopter1212 said:
Ok so how do I start this? Well I got an htc one for christmas and I wanted to root it. Everything was fine until I decided to flash a custom kit kat rom. The rom was stuck in a boot loop so I went back to twrp and flashed my recovery. I thought I fixed everything but then I stopped getting phone service. It kept saying looking for service. I thought it was a bad recovery so I downloaded cm from rom manager. While it was downloading, the phone just randomly rebooted. It kept doing this and still is.so then, being the idiot I am, flashed clockwork recovery to see if it would change anything. I tried downloading cm from rom manager again and finally finished downloading before it started rebooting again. I went into clockwork recovery and flashed cm and now it keeps rebooting and I have no phone service. I have no idea what to do. By switching from twrp to clockwork, I lost my recovery. Im totally screwed. I need help please!What do I do!!!!????
Click to expand...
Click to collapse
Try this tutorial from BD619 http://forum.xda-developers.com/showthread.php?t=2503646&highlight=tutorial
roflcopter1212 said:
Thanks a bunch! I'll check this out and see if it works
Click to expand...
Click to collapse
I tried it with your tut. but when I try to reboot into RUU it says fastboot isnt a valid win. 32bit application. What now?
BD619 said:
Run an RUU to fix and only flash roms that are made for Sprint or have Sprint support.
Sounds like you flashed a GSM rom that's why everything is jacked up.
Click to expand...
Click to collapse
I put in the failed 90 hboot.... command and it says its an invalid command
roflcopter1212 said:
I put in the failed 90 hboot.... command and it says its an invalid command
Click to expand...
Click to collapse
You *have* to get your Android SDK setup properly. All the commands your run end up on "command not found" of "invalid exe" and that suggests a few things:
First -- make *sure* you install the correct SDK for your computer. If you can't find them, let us know what your computer is (32-bit, 64-bit, windows, etc.). Further, it seem possible:
1) You did not yet install the Android SDK (or ADT bundle if that's what you grab);
2) If just the SDK, you did not run the 'android' app and let it update all the platform-tools apps (that's adb, fastboot, etc);
3) You did not open a command shell in the <sdk>/platform-tools directory, or you did not add your <sdk>/tools and <sdk>/platform-tools to your path. Further:
Finally -- make sure you have your USB drivers loaded if you're using Windows.
Don't run 300 miles per hour trying to fix things -- it'll kill your phone. Relax, take a breath and get the SDK setup. That will solve most of your problems (if not all). At least that's what it looks like from afar.
Before you run any of the RUU, you should be able to type either of:
adb devices
or
fastboot devices
The latter works only when you are at the bootloader with your USB plugged in and you selected 'fastboot'; the former runs only when your phone is booted fully.
The Sprint 3.05.651.5 RUU is available here: http://www.htc.com/us/support/htc-one-sprint/news/ (Install at your own risk!)
Hey guys,
I have the latest twrp sprint build installed on my Sprint HTC One (m7wls). It seems that no matter what rom I install, after sliding up the lock and unlocking the screen, I get a white HTC splash screen. The phone then proceeds to boot loop. I can access my recovery perfectly fine. This has happened with Android revolution, viper rom, nocturnal google edition, beanstalk 4.4 ge. etc. If it's a GE rom, then the phone will go maybe 1 or 2 steps into set up and then boot loop. If it's a sense rom, I get the same result for each one: i swipe up to unlock, get a white splash screen, and bootloop. I've tried wiping every cache, reflashing several times, and sideloading. I'm really lost guys, I don't know why my phone hates me. Any ideas on what's wrong?
Thanks
EXDetonator said:
Hey guys,
I have the latest twrp sprint build installed on my Sprint HTC One (m7wls). It seems that no matter what rom I install, after sliding up the lock and unlocking the screen, I get a white HTC splash screen. The phone then proceeds to boot loop. I can access my recovery perfectly fine. This has happened with Android revolution, viper rom, nocturnal google edition, beanstalk 4.4 ge. etc. If it's a GE rom, then the phone will go maybe 1 or 2 steps into set up and then boot loop. If it's a sense rom, I get the same result for each one: i swipe up to unlock, get a white splash screen, and bootloop. I've tried wiping every cache, reflashing several times, and sideloading. I'm really lost guys, I don't know why my phone hates me. Any ideas on what's wrong?
Thanks
Click to expand...
Click to collapse
Sounds like you installed the GSM version of ViperOne or ARHD(meaning not the version that still has Sprint support).
You will need to RUU to fix it
BD619 said:
Sounds like you installed the GSM version of ViperOne or ARHD(meaning not the version that still has Sprint support).
You will need to RUU to fix it
Click to expand...
Click to collapse
Dang alright thanks, I'm downloading the RUU executable now. So all I do is relock the bootloader, and then run the RUU in fastboot? I hope this works, I need a working phone.
EXDetonator said:
Dang alright thanks, I'm downloading the RUU executable now. So all I do is relock the bootloader, and then run the RUU in fastboot? I hope this works, I need a working phone.
Click to expand...
Click to collapse
Yup re-lock and run from fastboot
I'm getting an error when trying to run the RUU. It's saying it can't connect to the device. Attached is a picture of the message. Any insights anybody?
EXDetonator said:
I'm getting an error when trying to run the RUU. It's saying it can't connect to the device. Attached is a picture of the message. Any insights anybody?
Click to expand...
Click to collapse
Try a different usb port USB2 work best
BD619 said:
Try a different usb port USB2 work best
Click to expand...
Click to collapse
I've tried another usb port, no dice. I tried the "fastboot devices" command line under both ports, and the device shows up so idk why the RUU utility won't work. I may try manually flashing the firmware via fastboot command.
*edit* I managed to manually flash the firmware package via fastboot, but the phone refuses to boot into even stock android. It's going straight to hboot each time, where it say i has os- 3.05. What's going on? I already relocked.
**edit 2** I've managed to RUU! Now time to reflash recovery and try another rom. Any recommendations?
I'm stuck in the boot loader and adb devices says *daemon not running. starting it now.... *damon started successfully* List of devices attached ... BLANK...
I need to go back to stock since ALL RUU's cannot flash says wrong version
Image version 1.31.651.2 when installing 1.29.651.10 .... Error will not work..
I'm stuck in the bootloader without TWRP or recovery or anything other than Fastboot USB and Bootloader reboot power down basically...
THANKS
[Q] Carrier Unlock to AT&T Anyone?!?
Can someone help me get my phone completely wiped back to 110% stock everything so I can attempt to carrier unlock it to AT&T?
I paid for my Carrier unlock codes and want to use the phone on AT&T but nothing pops up to enter codes or anything like that at all...
My phone apparently has no recovery and no rom but hangs booting the rom....
Can someone who already carrier unlocked to AT&T in the USA tell me about the speeds and thoughts on how you did it?
I paid for my IEMI unlock pin and codes... now i just need to enter them and i had tried on ViperOne ... not stock
THANKS
1chris89 said:
I'm stuck in the boot loader and adb devices says *daemon not running. starting it now.... *damon started successfully* List of devices attached ... BLANK...
I need to go back to stock since ALL RUU's cannot flash says wrong version
Image version 1.31.651.2 when installing 1.29.651.10 .... Error will not work..
I'm stuck in the bootloader without TWRP or recovery or anything other than Fastboot USB and Bootloader reboot power down basically...
THANKS
Click to expand...
Click to collapse
Try this RUU.
Threads merged. @1chris89 please do not post like questions in different sections.
TonyStark said:
Threads merged. @1chris89 please do not post like questions in different sections.
Click to expand...
Click to collapse
Loading latest RUU ... has been about 10 minutes and its stuck at 4%... I just killed the process on windows 7 x64 and with it still on the HTC logo held power and volume down. Which booted back to bootloader... Gonna try it again...................................................
1chris89 said:
I'm stuck in the boot loader and adb devices says *daemon not running. starting it now.... *damon started successfully* List of devices attached ... BLANK...
I need to go back to stock since ALL RUU's cannot flash says wrong version
Image version 1.31.651.2 when installing 1.29.651.10 .... Error will not work..
I'm stuck in the bootloader without TWRP or recovery or anything other than Fastboot USB and Bootloader reboot power down basically...
THANKS
Click to expand...
Click to collapse
well first youre not supposed to use adb in the bootloader thats what fastboot is for. ensure that youre in fastboot and not hboot mode and if your drivers are installec properly you will see fastboot usb and is you run fastboot devices your device will appear when plugged into the computer. also you dont have to be on a stock rom to sim unlock just have to be on a sense rom.
Thanks I have gone through the tutorials and sim unlocking doesn't work. Its not the same as when unlocking an AT&T or T-Mobile phone when you put in the new sim and it asks for a code to unlock, enter code ----- Done.
So right now my TWRP is frozen basically can't use my touch to use it it's frozen.
Should I just RUU back to 5.0.3.6 stock....?
I just want to enter my unlock code HTC sent me.... Otherwise this phone is literally a Paper Weight.
Thanks
Are you soff?
Hi I installed GSM TWRP on my SPRINT and I can't get TWRP to work anymore it's like frozen to touch input...
I just wanna get SPRINT TWRP so I can disable SIMLOCK in the BOOTLOADER so I can use my AT&T sim with it.
I tried all the RUU's and they sit at "1/5 CHECKING HEADER..."
THANKS
That's the step it kept stopping at for me. Try the guide I wrote here: http://forum.xda-developers.com/spr...de-reset-phone-using-ruu-htcfastboot-t2876110
I had rooted my HTC One M7-Sprint a few months ago and installed CyanogenMod 11. Worked great. Now I'm trying to get it back to stock to sell it back cause I have a new phone.
I ran HTC One Gurus Rom "Guru Reset M7 Sprint 1.31.651.2" to return to stock with stock recovery. It did appear to work.
I have bootloader unlocked, and am S-ON.
One of the issues is that the Rom won't match the Firmware since all i could flash was the Rom being S-Off. The idea is that once I do an OTA it will update the Rom and the Firmware and I'll match.
But right now that mismatch between ROM and Firmware has my phone working, boots up into stock Android, but with a non-working screen. I'm told when we OTA it will be working again. the rom was 1.31, and from what I see in running Fastboot Getvar All the Firmware (I think that's version-main?) is 5.05.651.2. So I guess it's Cyanogenmod Firmware? Anyway, no match to the ROM version.
How do I get to the OTA without a working screen? I really don't want to buy any sort of hardware and spend a lot of $$, since I'm only going to get about $35 for the phone when I trade it in! I do have USB Debugging on and ADB working. Is there a way to start an OTA from ADB?
Have you tried just flashing the latest RUU? You may have to flash the full firmware first. That would get the phone up and running with the latest release.
http://forum.xda-developers.com/showthread.php?t=2795856
Hung applying OTA HTC One M7 Sprint
What I read from HTCOne Guru said (which is where I got the file I flashed) said you can't flash RUU if you're S-ON.
I found a cheap on the go cable, connected my mouse, and got the OTA downloaded. Then I said yes, install it. It restarted twice, then....nothing. Frozen. White HTC screen, nothing.
So I powered off, powered on, it starts loading, I hear about 3 notes of the HTC music as it's restarting, and ....nothing. Still stuck.
I can boot into Fastboot, but not ADB it seems (I can't get ADB Devices to return the device ID but I can get Fastboot Devices to return the ID.)
I've powered down and restarted, and I've tried to get into recovery (shuts down the phone). I've rebooted from Fastboot screen. Nothing works.
Steve Thomas said:
What I read from HTCOne Guru said (which is where I got the file I flashed) said you can't flash RUU if you're S-ON.
I found a cheap on the go cable, connected my mouse, and got the OTA downloaded. Then I said yes, install it. It restarted twice, then....nothing. Frozen. White HTC screen, nothing.
So I powered off, powered on, it starts loading, I hear about 3 notes of the HTC music as it's restarting, and ....nothing. Still stuck.
I can boot into Fastboot, but not ADB it seems (I can't get ADB Devices to return the device ID but I can get Fastboot Devices to return the ID.)
I've powered down and restarted, and I've tried to get into recovery (shuts down the phone). I've rebooted from Fastboot screen. Nothing works.
Click to expand...
Click to collapse
All HTC phones come s-on...I don't know where people are getting the info saying you cannot RUU if you are s-on. **Sidenote** You cannot RUU backwards if you are s-on.
The RUU is your best bet to get your device working again.
Remember you need to re-lock your bootloader before running the RUU
Is there a way of getting S-OFF for this device? I am having major problems without it...
Okay, so I'll start at the beginning. Once upon a time (two days ago), I bought a Desire 500 from ebay that was stuck at the bootloader screen. It arrived today and I have unlocked the bootloader with HTCDEV, but I cannot flash recovery with fastboot. It seems to accept the flash on my computer, but when I try to enter recovery the phone just hangs. I have tried to flash the zip with fastboot, but the error message:
FAILED (remote: not allowed)
keeps coming up. AFAIK this is because I don't have S-OFF, but I should still be able to flash recovery.
Can anyone help?
EDIT - OK, so rumrunner can S-OFF it, but you have to have a ROM installed to use it...
I don't understand....
I literally don't know what I'm doing wrong. I've even found the ROM with the correct CID and tried to flash it through fastboot and RUU mode but it's not working.
Somebody help please... I have tried searching for the answer...
EDIT - I have flashed the correct CWM for my hboot and it has hung on:
Entering Recovery...
with the white HTC screen. It has been like this for ten minutes...
rumrunner didn't s-off my dual desire500.
it's fully rooted
has cwm on it
has not busybox n i wanted to s-off my phone in order to push busybox in it.
any idea?
Dead phone
First of all in order to install the original firmware (so called stock rom) your device needs to be in locked status. Other than that :
I also wanted to s-off my phone which is also stuck both on HTC screen and when trying to enter the recovery. Many articles and threads are saying you need to enable usb debugging in phone options but if you are phone can not load the android os and the corrresponding menu, applying this setting it is not possible. Therefore you can consider your phone is nothing but a flashlight at the moment.
Regarding my searchs our phone's emmc is corrupt or needs to be reprogrammed or something like it. It is not possible to load the official firmware using RUU files or any other custom ROMs.
kiaheyrati038 said:
rumrunner didn't s-off my dual desire500.
it's fully rooted
has cwm on it
has not busybox n i wanted to s-off my phone in order to push busybox in it.
any idea?
Click to expand...
Click to collapse